Resources
In a laboratory collision cart experiment, a dynamics cart of total mass equipped with a low-friction wheel assembly moves along a level track toward a fixed piezoelectric force sensor. A photogate array measures the cart's velocity immediately before impact as and immediately after rebound as . The force transducer samples force data at , yielding a contact force profile well-modeled by an isosceles triangle with base width (such that rises linearly from to at and returns linearly to at ). (a) Using the impulse-momentum theorem on the photogate data, compute the net impulse delivered to the cart. (b) Using the geometric area of the force-time curve, determine the peak impact force registered by the sensor. (c) Determine the equivalent average impact force during the collision.
Answer and steps
Final answer
(a) directed opposite to initial motion (or ); (b) ; (c) .
Steps
Part (a): Net Impulse from the Impulse-Momentum Theorem
The impulse-momentum theorem states that the net impulse exerted on an object equals its change in linear momentum :
-
Identify the given values:
- Mass of the cart:
- Initial velocity:
- Final velocity:
-
Calculate the change in velocity:
Pitfall to avoid: Momentum is a vector quantity. Because the cart rebounds, the velocities have opposite signs. Forgetting the negative sign on leads to subtracting rather than adding their speeds.
- Calculate the impulse:
Thus, the net impulse has a magnitude of and is directed opposite to the cart's initial motion ().
Part (b): Peak Impact Force from the Force-Time Curve
On a force-time graph, the impulse is represented by the area under the curve:
The contact force profile forms an isosceles triangle with:
- Base:
- Height:
- Set the geometric area equal to the magnitude of impulse:
- Solve for :
Part (c): Equivalent Average Impact Force
The average force is defined as the constant force that would deliver the exact same total impulse over the collision duration :
- Calculate :
Alternative check: For any symmetric triangular force profile with zero baseline, the average value is exactly half of the peak:
Typical errors
01 The student ignores the vector nature of velocity and subtracts magnitudes, resulting in an underestimated change in momentum.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Because the cart rebounds, the final velocity points in the negative direction (). Velocity is a signed vector quantity, so rather than .
- Step 2Correct
Your geometric formula for the area of the triangular force profile was completely correct. Your calculated value of differs from solely because it carried over the underestimated impulse from part (a).
- Step 3Correct
Your definition and equation for average force were applied correctly. The resulting value was scaled down by a factor of roughly due to the propagated impulse error from part (a).
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the impulse-momentum theorem as the path to find the net impulse.
You recognized that the impulse equals the area of a triangular force-time graph and set up accurately.
You correctly applied the relationship to find the average impact force.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou subtracted the final speed from the initial speed as scalar magnitudes rather than keeping the negative sign indicating rebound.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisTreating 1D velocity as an unsigned scalar quantity causes rebounds to appear as small velocity differences () instead of large direction reversals ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Define a Positive Direction
Velocity and impulse are vectors; an object bouncing back reverses its velocity sign.
Always explicitly write signs for initial and final velocities before calculating: and .
- Physical Reality Check for Rebounds
Stopping an object requires removing all its initial momentum; rebounding it requires pushing it even further in reverse.
Ensure that the magnitude of for a bouncing object is greater than its initial speed ().
CORRECTED PATH
ACEpath Teacher's DemonstrationInclude signs in the velocity difference: .
Compute the impulse magnitude: .
Recalculate peak force: .
Recalculate average force: .
(a) opposite to initial motion; (b) ; (c)
02 The student forgets to convert the contact time from milliseconds to seconds, leading to forces that are three orders of magnitude too small.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You correctly set the triangular area equal to impulse, but you substituted the base as instead of converting milliseconds to seconds (). Because requires time in seconds, your calculated force was too small by a factor of .
- Step 3Correct
Your formula and relationship between impulse and average force are correct, but the calculation propagated the unconverted time value of instead of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly preserved the vector sign difference when calculating the rebound change in velocity .
You related the geometric area of the force-time graph directly to the magnitude of impulse.
You used the correct relationship between impulse, average force, and contact time.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the numerical value directly into standard SI formulas without converting into .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisIn impulse calculations, newtons and seconds are base/derived SI units (). When time is measured in milliseconds, substituting numerical time directly produces forces in or leaves them mismatched by .
REASONING PATH
Your ACEpath teacher’s suggested approach- Check SI unit compatibility before substituting
Every force and momentum formula assumes standard SI base units (, , ).
Always convert milliseconds to seconds () before substituting into or graph areas.
- Sanity check physical magnitudes
A dynamics cart collision typically produces forces on the order of tens or hundreds of newtons, not fractions of a newton.
If your peak force turns out to be less than for a moving cart of almost , immediately re-check time prefix scaling.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert contact duration to seconds: .
Set the area under the triangular force curve to the impulse magnitude: .
Substitute : .
Calculate the average force: .
(a) (magnitude directed opposite to initial motion); (b) ; (c) .
03 The student treats the force-time profile as a rectangle rather than a triangle, omitting the factor of 1/2 in the area formula.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
The force profile is triangular rather than rectangular, so the area representing impulse is .
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly treated velocity as a vector by assigning opposite signs to the initial and rebound velocities in part (a).
You correctly used the impulse-momentum theorem to determine the total impulse.
You correctly evaluated the average impact force by dividing the impulse magnitude by the collision duration in part (c).
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed impulse equals peak force multiplied by time interval (), omitting the geometric factor required for a triangular force profile.
REASONING PATH
Your ACEpath teacher’s suggested approach- Area under an $F$-$t$ curve
The net impulse delivered equals the geometric area between the curve and the time axis: for a triangle, .
Always sketch the force profile or check its stated geometric shape before writing the area formula.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the area formula for an isosceles triangle: .
Equate the geometric area to the magnitude of impulse: .
Solve for : .
(a) (magnitude opposite to initial motion); (b) ; (c) .
Lock it in
An object with speed hits a wall and bounces directly back with speed . What is its change in velocity along the incoming axis?
. Because direction reverses, , not zero.
Similar question
A basketball hits the floor moving downward at and bounces upward at . Find the magnitude of the impulse delivered to the ball by the floor.
Answer
. Taking upward as positive: , . Thus , and .
A baseball arrives horizontally at and is hit directly back toward the pitcher at . The collision lasts . If modeled as a symmetric triangle force pulse, find the peak force exerted on the ball.
Answer
. Magnitude of impulse: . From the triangular area, .
A crash-test car moving at strikes a barrier and rebounds at . During the impact, the bumper force profile is parabolic: with maximum height . Determine and .
Answer
and . Total impulse: . Average force: . Peak force: .