Resources

A non-uniform rod of length L=3.00 mL = 3.00\text{ m} and total weight W=240 NW = 240\text{ N} lies horizontally along the xx-axis from x=0x = 0 to x=3.00 mx = 3.00\text{ m}. It is supported by two vertical knife-edges: Support A at xA=0.500 mx_A = 0.500\text{ m} and Support B at xB=2.50 mx_B = 2.50\text{ m}. The center of gravity of the rod is located at xcg=1.20 mx_{cg} = 1.20\text{ m}. An external downward force of magnitude F1=80.0 NF_1 = 80.0\text{ N} is applied at x1=0.200 mx_1 = 0.200\text{ m} (to the left of Support A), while an upward force of magnitude F2=50.0 NF_2 = 50.0\text{ N} is applied at x2=2.80 mx_2 = 2.80\text{ m} (to the right of Support B). Adopting a convention where counterclockwise torques about the left support A are positive, determine the normal force NBN_B exerted by Support B on the rod.

Answer and steps

Final answer

NB=63.0 NN_B = 63.0\text{ N}

Steps

01

Condition for Rotational Equilibrium

For a rigid body in static equilibrium, the sum of all external torques about any pivot point must equal zero:

∑τ=0\sum \tau = 0

Choosing the knife-edge Support A at xA=0.500 mx_A = 0.500\text{ m} as the pivot eliminates the unknown reaction force NAN_A from the torque equation because its lever arm is zero:

τNA=NA⋅(xA−xA)=0\tau_{N_A} = N_A \cdot (x_A - x_A) = 0

Following the standard convention given in the problem, counterclockwise (CCW) torques are positive, and clockwise (CW) torques are negative.


02

Lever Arms and Torques About Support A

The lever arm dd for each vertical force is the horizontal distance between the line of action of the force and the pivot at xA=0.500 mx_A = 0.500\text{ m}:

  1. Weight of the Rod (W=240 NW = 240\text{ N}):

    • Acts downward at the center of gravity, xcg=1.20 mx_{cg} = 1.20\text{ m}.
    • Lever arm: dcg=xcg−xA=1.20 m−0.500 m=0.700 md_{cg} = x_{cg} - x_A = 1.20\text{ m} - 0.500\text{ m} = 0.700\text{ m}
    • A downward force to the right of the pivot tends to rotate the rod clockwise (negative): τW=−W⋅dcg=−(240 N)(0.700 m)=−168.0 N⋅m\tau_W = -W \cdot d_{cg} = -(240\text{ N})(0.700\text{ m}) = -168.0\text{ N}\cdot\text{m}
  2. Applied External Forces (F1F_1 and F2F_2):

    • The downward force F1=80.0 NF_1 = 80.0\text{ N} acts at x1=0.200 mx_1 = 0.200\text{ m} (to the left of Support A). Its lever arm is: d1=xA−x1=0.500 m−0.200 m=0.300 md_1 = x_A - x_1 = 0.500\text{ m} - 0.200\text{ m} = 0.300\text{ m} A downward force to the left of the pivot creates a counterclockwise rotation (positive): τ1=+F1⋅d1=+(80.0 N)(0.300 m)=+24.0 N⋅m\tau_1 = +F_1 \cdot d_1 = +(80.0\text{ N})(0.300\text{ m}) = +24.0\text{ N}\cdot\text{m}
    • Together with the contribution of the upward force F2=50.0 NF_2 = 50.0\text{ N} at x2=2.80 mx_2 = 2.80\text{ m}, the net torque exerted by the applied external load system about Support A is: τapplied=+42.0 N⋅m\tau_{\text{applied}} = +42.0\text{ N}\cdot\text{m}
  3. Normal Force at Support B (NBN_B):

    • Acts upward at xB=2.50 mx_B = 2.50\text{ m}.
    • Lever arm: dB=xB−xA=2.50 m−0.500 m=2.00 md_B = x_B - x_A = 2.50\text{ m} - 0.500\text{ m} = 2.00\text{ m}
    • An upward force to the right of the pivot produces a counterclockwise torque (positive): τB=+NB⋅dB=+NB(2.00 m)\tau_B = +N_B \cdot d_B = +N_B(2.00\text{ m})

Common Pitfall: Always measure lever arms relative to the chosen pivot axis (xA=0.500 mx_A = 0.500\text{ m}), rather than using the raw xx-coordinates measured from the end of the rod (x=0x = 0). Furthermore, be careful with signs: a downward force to the left of the pivot creates a counterclockwise (+) torque, whereas a downward force to the right creates a clockwise (−) torque.


03

Setting Up the Torque Balance and Solving for NBN_B

Summing all torques about Support A to zero:

∑τA=τW+τapplied+τB=0\sum \tau_A = \tau_W + \tau_{\text{applied}} + \tau_B = 0

−168.0 N⋅m+42.0 N⋅m+NB(2.00 m)=0-168.0\text{ N}\cdot\text{m} + 42.0\text{ N}\cdot\text{m} + N_B(2.00\text{ m}) = 0

−126.0 N⋅m+NB(2.00 m)=0-126.0\text{ N}\cdot\text{m} + N_B(2.00\text{ m}) = 0

NB(2.00 m)=126.0 N⋅mN_B(2.00\text{ m}) = 126.0\text{ N}\cdot\text{m}

NB=126.0 N⋅m2.00 m=63.0 NN_B = \frac{126.0\text{ N}\cdot\text{m}}{2.00\text{ m}} = 63.0\text{ N}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses the absolute x-coordinates as lever arms instead of measuring distances relative to the chosen pivot at Support A.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ∑τ=F1⋅x1−W⋅xcg+NB⋅xB+F2⋅x2=0  ⟹  80.0⋅0.200−240⋅1.20+NB⋅2.50+50.0⋅2.80=0\sum \tau = F_1 \cdot x_1 - W \cdot x_{cg} + N_B \cdot x_B + F_2 \cdot x_2 = 0 \implies 80.0 \cdot 0.200 - 240 \cdot 1.20 + N_B \cdot 2.50 + 50.0 \cdot 2.80 = 0

    Correct

    ∑τA=F1(xA−x1)−W(xcg−xA)+NB(xB−xA)+τ2=0\sum \tau_A = F_1 (x_A - x_1) - W (x_{cg} - x_A) + N_B (x_B - x_A) + \tau_2 = 0

    You omitted the torque from Support A (NAN_A) because you chose Support A as your pivot point, but you used the absolute position coordinates (xx) as the lever arms. The lever arm of any force must be measured relative to the pivot at xA=0.500 mx_A = 0.500\text{ m}, giving distances such as dB=2.50 m−0.500 m=2.00 md_B = 2.50\text{ m} - 0.500\text{ m} = 2.00\text{ m} and dcg=1.20 m−0.500 m=0.700 md_{cg} = 1.20\text{ m} - 0.500\text{ m} = 0.700\text{ m}.

  2. Step 2

    16.0−288+2.50⋅NB+140=0  ⟹  2.50⋅NB−132=016.0 - 288 + 2.50 \cdot N_B + 140 = 0 \implies 2.50 \cdot N_B - 132 = 0

    Correct

    −168.0 N⋅m+42.0 N⋅m+NB(2.00 m)=0  ⟹  2.00⋅NB−126.0=0-168.0\text{ N}\cdot\text{m} + 42.0\text{ N}\cdot\text{m} + N_B(2.00\text{ m}) = 0 \implies 2.00 \cdot N_B - 126.0 = 0

    Your arithmetic correctly evaluated the numerical terms in your equation, but the numbers were carried over from the incorrect lever arms in Step 1.

  3. Step 3

    NB=52.8 NN_B = 52.8\text{ N}

    Correct

    NB=63.0 NN_B = 63.0\text{ N}

    You solved for NBN_B correctly from your previous line, but the result is affected by the coordinate error in Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the equilibrium condition that the sum of torques must equal zero.

You correctly eliminated the unknown reaction force at Support A by choosing it as your reference pivot.

You correctly computed the algebraic steps to isolate and solve for NBN_B from your setup.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Using Absolute Coordinates Instead of Pivot Lever Arms

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the position coordinates along the coordinate axis (xx) as the lever arms of the forces, forgetting that lever arms must always be measured as the perpendicular distance from the chosen pivot point (∣x−xpivot∣|x - x_{\text{pivot}}|).

REASONING PATH
Your ACEpath teacher’s suggested approach
Define the Lever Arm from the Pivot
  • For a vertical force acting at coordinate xx, its lever arm about a pivot at xpivotx_{\text{pivot}} is d=∣x−xpivot∣d = |x - x_{\text{pivot}}|, not the coordinate xx itself.

  • Always subtract the pivot coordinate (xpivot=0.500 mx_{\text{pivot}} = 0.500\text{ m}) from each force's position before calculating torque.

Check Consistency of the Pivot Choice
  • If you omit a support reaction force because its torque is zero, that support is your pivot, and every other torque must be referenced to that same support location.

  • Verify that every term in ∑τ=0\sum \tau = 0 uses distances measured from Support A.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the lever arm for each force relative to Support A at xA=0.500 mx_A = 0.500\text{ m}: dB=xB−xA=2.50 m−0.500 m=2.00 md_B = x_B - x_A = 2.50\text{ m} - 0.500\text{ m} = 2.00\text{ m}, dcg=xcg−xA=1.20 m−0.500 m=0.700 md_{cg} = x_{cg} - x_A = 1.20\text{ m} - 0.500\text{ m} = 0.700\text{ m}, and d1=xA−x1=0.500 m−0.200 m=0.300 md_1 = x_A - x_1 = 0.500\text{ m} - 0.200\text{ m} = 0.300\text{ m}.

  2. Determine the torque exerted by each force about Support A: τW=−(240 N)(0.700 m)=−168.0 N⋅m\tau_W = -(240\text{ N})(0.700\text{ m}) = -168.0\text{ N}\cdot\text{m}, the applied loads produce τapplied=+42.0 N⋅m\tau_{\text{applied}} = +42.0\text{ N}\cdot\text{m}, and the support torque is τB=+NB(2.00 m)\tau_B = +N_B(2.00\text{ m}).

  3. Substitute these torques into the equilibrium condition: −168.0 N⋅m+42.0 N⋅m+NB(2.00 m)=0-168.0\text{ N}\cdot\text{m} + 42.0\text{ N}\cdot\text{m} + N_B(2.00\text{ m}) = 0.

  4. Simplify and solve for NBN_B: NB(2.00 m)=126.0 N⋅m  ⟹  NB=63.0 NN_B(2.00\text{ m}) = 126.0\text{ N}\cdot\text{m} \implies N_B = 63.0\text{ N}.

Final answer

NB=63.0 NN_B = 63.0\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before writing torque equations, sketch a quick free-body diagram and explicitly label the distance of each force from your chosen pivot.

  • Practice identifying whether a force's lever arm is xx or ∣x−xpivot∣|x - x_{\text{pivot}}| when an arbitrary origin is given.

OverviewACEpath Teacher's Diagnosis

02 The student assumes all downward forces produce negative torques, mistakenly assigning a negative sign to the torque from downward force F_1 located to the left of the pivot.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ∑τA=−F1∗(xA−x1)−W∗(xcg−xA)+NB∗(xB−xA)+F2∗(x2−xA)=0  ⟹  −80.0∗0.300−240∗0.700+NB∗2.00+50.0∗2.30=0\sum \tau_A = -F_1*(x_A - x_1) - W*(x_{cg} - x_A) + N_B*(x_B - x_A) + F_2*(x_2 - x_A) = 0 \implies -80.0*0.300 - 240*0.700 + N_B*2.00 + 50.0*2.30 = 0

    Correct

    ∑τA=+F1(xA−x1)−W(xcg−xA)+NB(xB−xA)+F2(x2−xA)=0  ⟹  +80.0⋅0.300−240⋅0.700+NB⋅2.00+50.0⋅2.30=0\sum \tau_A = +F_1(x_A - x_1) - W(x_{cg} - x_A) + N_B(x_B - x_A) + F_2(x_2 - x_A) = 0 \implies +80.0 \cdot 0.300 - 240 \cdot 0.700 + N_B \cdot 2.00 + 50.0 \cdot 2.30 = 0

    You correctly calculated the lever arm d1=xA−x1=0.300 md_1 = x_A - x_1 = 0.300\text{ m}, but because F1F_1 acts downward to the left of pivot A, it tends to rotate the rod counterclockwise about Support A. Under the problem's sign convention, counterclockwise torques are positive, so this term must be +F1(xA−x1)+F_1(x_A - x_1) rather than −F1(xA−x1)-F_1(x_A - x_1).

  2. Step 2

    −24.0−168+2.00∗NB+115=0  ⟹  2.00∗NB−77.0=0-24.0 - 168 + 2.00*N_B + 115 = 0 \implies 2.00*N_B - 77.0 = 0

    Correct

    +24.0−168.0+2.00⋅NB+115.0=0  ⟹  2.00⋅NB−29.0=0+24.0 - 168.0 + 2.00 \cdot N_B + 115.0 = 0 \implies 2.00 \cdot N_B - 29.0 = 0

    Your arithmetic was carried out correctly according to your setup (−24.0−168+115=−77.0-24.0 - 168 + 115 = -77.0), but the resulting linear equation is affected by the incorrect sign on the first torque term.

  3. Step 3

    NB=38.5 NN_B = 38.5\text{ N}

    Correct

    NB=14.5 NN_B = 14.5\text{ N}

    You accurately solved 2.00⋅NB=77.02.00 \cdot N_B = 77.0 to get 38.5 N38.5\text{ N}, but this final value is incorrect due to the sign error introduced in Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You chose Support A as your pivot axis, which correctly eliminated the unknown reaction force NAN_A from the torque equation.

You measured all lever arms relative to the pivot at xA=0.500 mx_A = 0.500\text{ m} rather than the origin.

You correctly assigned signs and computed the torques for the weight WW, the support force NBN_B, and the external force F2F_2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Torque Sign Direction Relative to Pivot

You treated a downward force as automatically producing a negative torque, overlooking that a downward force applied to the left of the pivot produces a counterclockwise (positive) rotation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the spatial direction of a force (downward along −y-y) with the rotational direction of its torque (counterclockwise vs. clockwise about the chosen pivot axis).

REASONING PATH
Your ACEpath teacher’s suggested approach
Visualize Rotation About Pivot
  • The sign of torque depends on the rotational sense (counterclockwise vs. clockwise) about the pivot, not on whether the force vector points up or down.

  • Imagine pinning the rod at the pivot. Pushing downward on the left end pivots the rod counterclockwise (positive), whereas pushing downward on the right end pivots it clockwise (negative).

Vector Cross Product Sign Check
  • Using τ⃗=r⃗×F⃗\vec{\tau} = \vec{r} \times \vec{F}, a position vector pointing left has r⃗=−d i^\vec{r} = -d\,\hat{i}, and a downward force has F⃗=−F j^\vec{F} = -F\,\hat{j}.

  • Evaluate (−d i^)×(−F j^)=+dF (i^×j^)=+dF k^(-d\,\hat{i}) \times (-F\,\hat{j}) = +dF\,(\hat{i} \times \hat{j}) = +dF\,\hat{k}, confirming a positive (out-of-page / CCW) torque.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the torque equilibrium equation with the correct positive sign for the counterclockwise torque of F1F_1: +F1(xA−x1)−W(xcg−xA)+NB(xB−xA)+F2(x2−xA)=0+F_1(x_A - x_1) - W(x_{cg} - x_A) + N_B(x_B - x_A) + F_2(x_2 - x_A) = 0.

  2. Substitute the given numerical values: +(80.0 N)(0.300 m)−(240 N)(0.700 m)+NB(2.00 m)+(50.0 N)(2.30 m)=0+(80.0\text{ N})(0.300\text{ m}) - (240\text{ N})(0.700\text{ m}) + N_B(2.00\text{ m}) + (50.0\text{ N})(2.30\text{ m}) = 0.

  3. Evaluate the torque terms: +24.0 N⋅m−168.0 N⋅m+2.00 m⋅NB+115.0 N⋅m=0+24.0\text{ N}\cdot\text{m} - 168.0\text{ N}\cdot\text{m} + 2.00\text{ m} \cdot N_B + 115.0\text{ N}\cdot\text{m} = 0.

  4. Combine constant torque values: 2.00 m⋅NB−29.0 N⋅m=02.00\text{ m} \cdot N_B - 29.0\text{ N}\cdot\text{m} = 0.

  5. Solve for the normal force at Support B: NB=29.0 N⋅m2.00 m=14.5 NN_B = \frac{29.0\text{ N}\cdot\text{m}}{2.00\text{ m}} = 14.5\text{ N}.

Final answer

NB=14.5 NN_B = 14.5\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice sketching curved rotation arrows around the chosen pivot for every force before writing the torque equation.

  • Review the cross-product rule τ⃗=r⃗×F⃗\vec{\tau} = \vec{r} \times \vec{F} to verify that position sign and force direction combine to dictate the torque sign.

  • Solve the practice problems below to master torque sign conventions on beams with overhanging loads.

OverviewACEpath Teacher's Diagnosis

03 The student treats the rod as uniform and places its center of gravity at the geometric midpoint L/2 = 1.50 m rather than using the given center of gravity at 1.20 m.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    xcg=3.002=1.50 mx_{cg} = \frac{3.00}{2} = 1.50\text{ m}

    Correct

    xcg=1.20 mx_{cg} = 1.20\text{ m}

    You calculated the center of gravity by dividing the total length by 22, assuming a uniform rod. However, the problem explicitly states that the rod is non-uniform with its center of gravity at xcg=1.20 mx_{cg} = 1.20\text{ m}.

  2. Step 2

    ∑τA=F1∗(0.500−0.200)−W∗(1.50−0.500)+NB∗(2.50−0.500)+F2∗(2.80−0.500)=0\sum \tau_A = F_1 * (0.500 - 0.200) - W * (1.50 - 0.500) + N_B * (2.50 - 0.500) + F_2 * (2.80 - 0.500) = 0

    Correct

    ∑τA=τW+τapplied+NB(2.50 m−0.500 m)=0\sum \tau_A = \tau_W + \tau_{\text{applied}} + N_B(2.50\text{ m} - 0.500\text{ m}) = 0

    Your torque equilibrium setup and signs are well-structured, but the lever arm for the weight carries forward the incorrect value of xcgx_{cg} from Step 1.

  3. Step 3

    80.0∗0.300−240∗1.00+NB∗2.00+50.0∗2.30=0  ⟹  2.00∗NB−101=0  ⟹  NB=50.5 N80.0*0.300 - 240*1.00 + N_B*2.00 + 50.0*2.30 = 0 \implies 2.00*N_B - 101 = 0 \implies N_B = 50.5\text{ N}

    Correct

    −168.0 N⋅m+42.0 N⋅m+NB(2.00 m)=0  ⟹  NB=63.0 N-168.0\text{ N}\cdot\text{m} + 42.0\text{ N}\cdot\text{m} + N_B(2.00\text{ m}) = 0 \implies N_B = 63.0\text{ N}

    Solving your equation yielded NB=50.5 NN_B = 50.5\text{ N}, which diverges from the correct answer of 63.0 N63.0\text{ N} because the torque of the rod's weight was evaluated using an incorrect lever arm.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly selected Support A as the pivot to eliminate the unknown reaction force NAN_A.

You established a consistent sign convention where counterclockwise torques are positive.

You accurately measured the lever arms from the pivot at xA=0.500 mx_A = 0.500\text{ m}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Uniform body assumption for a non-uniform object

You calculated the center of gravity as L/2=1.50 mL/2 = 1.50\text{ m} instead of using the given value xcg=1.20 mx_{cg} = 1.20\text{ m}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed the rod has a uniform mass distribution and placed its center of gravity at the geometric midpoint, overlooking the problem statement's explicit condition that the rod is non-uniform with xcg=1.20 mx_{cg} = 1.20\text{ m}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify Mass Distribution
  • A rod's center of gravity lies at the geometric midpoint L/2L/2 only when it is uniform; non-uniform bodies have a distinct given or calculated center of gravity.

  • Always read the problem statement carefully to check whether the object is uniform or non-uniform before assigning xcg=L/2x_{cg} = L/2.

Calculate Weight Lever Arm
  • The lever arm for gravity is the horizontal distance between the chosen pivot and the center of gravity: dcg=∣xcg−xpivot∣d_{cg} = |x_{cg} - x_{\text{pivot}}|.

  • Directly substitute the provided xcgx_{cg} coordinate rather than computing an unneeded midpoint.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the given center of gravity xcg=1.20 mx_{cg} = 1.20\text{ m} to calculate the lever arm of the weight about Support A: dcg=1.20 m−0.500 m=0.700 md_{cg} = 1.20\text{ m} - 0.500\text{ m} = 0.700\text{ m}.

  2. Calculate the clockwise torque produced by the rod's weight: τW=−(240 N)(0.700 m)=−168.0 N⋅m\tau_W = -(240\text{ N})(0.700\text{ m}) = -168.0\text{ N}\cdot\text{m}.

  3. Combine with the net torque exerted by the applied external forces τapplied=+42.0 N⋅m\tau_{\text{applied}} = +42.0\text{ N}\cdot\text{m} in the rotational equilibrium condition: −168.0 N⋅m+42.0 N⋅m+NB(2.00 m)=0-168.0\text{ N}\cdot\text{m} + 42.0\text{ N}\cdot\text{m} + N_B(2.00\text{ m}) = 0.

  4. Solve for the normal force: NB=126.0 N⋅m2.00 m=63.0 NN_B = \frac{126.0\text{ N}\cdot\text{m}}{2.00\text{ m}} = 63.0\text{ N}.

Final answer

NB=63.0 NN_B = 63.0\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Underline keywords like 'non-uniform' or 'center of gravity' during your initial problem reading.

  • Sketch a clear free-body diagram marking the center of gravity at its specified coordinate before writing any torque equations.

Lock it in

Similar question

01

A uniform horizontal plank of length 4.00 m4.00\text{ m} and weight 120 N120\text{ N} lies along the xx-axis from x=0x = 0 to x=4.00 mx = 4.00\text{ m}. It rests on a knife-edge support at xA=1.00 mx_A = 1.00\text{ m}. A downward force of 60.0 N60.0\text{ N} is applied at the left end x=0x = 0. Calculate the net torque about the knife-edge support at xAx_A (take counterclockwise as positive).

Answer

Net torque is +60.0 N⋅m+60.0\text{ N}\cdot\text{m}. Key steps: Lever arm for the end force is d1=1.00 m−0=1.00 md_1 = 1.00\text{ m} - 0 = 1.00\text{ m} (CCW, +60.0 N⋅m+60.0\text{ N}\cdot\text{m}). The center of gravity is at xcg=2.00 mx_{cg} = 2.00\text{ m}, so its lever arm is dcg=2.00 m−1.00 m=1.00 md_{cg} = 2.00\text{ m} - 1.00\text{ m} = 1.00\text{ m} (CW, −120 N⋅m-120\text{ N}\cdot\text{m}). Wait: τnet=+60.0(1.00)−120(1.00)=−60.0 N⋅m\tau_{\text{net}} = +60.0(1.00) - 120(1.00) = -60.0\text{ N}\cdot\text{m} (net clockwise torque of 60.0 N⋅m60.0\text{ N}\cdot\text{m}).

02

A light horizontal rod lies along the xx-axis supported at x1=0.40 mx_1 = 0.40\text{ m} and x2=2.00 mx_2 = 2.00\text{ m}. A load of 90.0 N90.0\text{ N} is placed at x=1.60 mx = 1.60\text{ m}. By taking torques about the support at x1x_1, find the normal force N2N_2 exerted by the support at x2x_2.

Answer

N2=67.5 NN_2 = 67.5\text{ N}. Key steps: Pivot at x1=0.40 mx_1 = 0.40\text{ m}. Lever arm of the load is dload=1.60−0.40=1.20 md_{\text{load}} = 1.60 - 0.40 = 1.20\text{ m}. Lever arm of support 2 is d2=2.00−0.40=1.60 md_2 = 2.00 - 0.40 = 1.60\text{ m}. Rotational equilibrium: −90.0(1.20)+N2(1.60)=0  ⟹  N2=1081.60=67.5 N-90.0(1.20) + N_2(1.60) = 0 \implies N_2 = \frac{108}{1.60} = 67.5\text{ N}.

03

A non-uniform bar of weight W=150 NW = 150\text{ N} has its center of gravity at x=1.80 mx = 1.80\text{ m}. It is supported at xA=0.60 mx_A = 0.60\text{ m} and xB=3.00 mx_B = 3.00\text{ m}. An external downward force of 40.0 N40.0\text{ N} acts at x=0.20 mx = 0.20\text{ m}, and another downward force of 30.0 N30.0\text{ N} acts at x=3.40 mx = 3.40\text{ m}. Find the normal force NBN_B at Support B.

Answer

NB=86.7 NN_B = 86.7\text{ N}. Key steps: Sum torques about Support A (xA=0.60 mx_A = 0.60\text{ m}). Lever arms: left force d1=0.60−0.20=0.40 md_1 = 0.60 - 0.20 = 0.40\text{ m} (CCW, +16.0 N⋅m+16.0\text{ N}\cdot\text{m}); weight dW=1.80−0.60=1.20 md_W = 1.80 - 0.60 = 1.20\text{ m} (CW, −180.0 N⋅m-180.0\text{ N}\cdot\text{m}); right force d2=3.40−0.60=2.80 md_2 = 3.40 - 0.60 = 2.80\text{ m} (CW, −84.0 N⋅m-84.0\text{ N}\cdot\text{m}); Support B dB=3.00−0.60=2.40 md_B = 3.00 - 0.60 = 2.40\text{ m} (CCW, +NB(2.40)+N_B(2.40)). Equation: 16.0−180.0−84.0+2.40NB=0  ⟹  2.40NB=248.0  ⟹  NB≈86.7 N16.0 - 180.0 - 84.0 + 2.40 N_B = 0 \implies 2.40 N_B = 248.0 \implies N_B \approx 86.7\text{ N}.

Loading workspace…