Resources
An environmental monitoring buoy measures salinity in a brackish tidal estuary, reporting a dissolved mineral concentration of dissolved in pure water (base density ), resulting in a bulk fluid density of . Convert this fluid density into standard SI units (), and calculate the total absolute pressure in kilopascals () exerted on an aquatic sensor submerged at a depth of below the surface, given an ambient barometric pressure of () and .
Answer and steps
Final answer
;
Steps
Convert the Fluid Density to SI Units
The standard SI unit for density is kilograms per cubic meter ().
Convert the given bulk density using the standard unit conversion factors ( and ):
Multiplying by the bulk density:
Convert Given Parameters to SI Units
- Depth ():
- Surface Atmospheric Pressure ():
Calculate the Hydrostatic Gauge Pressure
The pressure exerted solely by the liquid column of depth is given by the hydrostatic formula:
Substitute the known values:
Calculate the Total Absolute Pressure
The absolute pressure acting on the submerged sensor is the sum of the atmospheric pressure at the water's surface and the hydrostatic pressure at depth:
Convert the result into kilopascals () by dividing by :
Rounding to three significant figures to match the given depth () and pressure ():
Typical errors
01 The student calculates only the hydrostatic gauge pressure and omits the atmospheric pressure contribution to total absolute pressure.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You calculated the hydrostatic gauge pressure exerted by the water column alone (). Total absolute pressure requires adding the surface atmospheric pressure: .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the fluid density from to .
You accurately converted depth from centimeters to meters.
You correctly evaluated the hydrostatic fluid column pressure .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating hydrostatic gauge pressure () with total absolute pressure (). When calculating total or absolute pressure at depth in a body of fluid open to the atmosphere, the ambient surface pressure must be added.
REASONING PATH
Your ACEpath teacher’s suggested approach- Gauge vs. Absolute Pressure
Whenever a problem asks for 'total' or 'absolute' pressure beneath an open surface, check for and add the ambient atmospheric pressure ().
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert barometric pressure to pascals: .
Add atmospheric pressure to the hydrostatic gauge pressure: .
Convert to kilopascals and round to three significant figures: .
;
02 The student misconverts centimeters of depth to meters by dividing by 10 instead of 100, resulting in an overestimated hydrostatic pressure.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You divided by instead of . Since , the correct depth is .
- Step 4Correct
You correctly applied the gauge pressure formula , but this value is ten times too large due to the incorrect depth from Step 3.
- Step 5Correct
You correctly added atmospheric and gauge pressure, but the resulting total is incorrect because of the propagated depth error.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the bulk fluid density into standard SI units ().
You correctly converted barometric pressure from to pascals and kilopascals.
You properly recognized that absolute pressure is the sum of atmospheric pressure and hydrostatic gauge pressure ().
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou converted to by dividing by instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the metric prefix centi- () with deci- (), which inflated the depth and hydrostatic pressure by a factor of ten.
REASONING PATH
Your ACEpath teacher’s suggested approach- Centimeter to Meter Conversion
The prefix centi- means or one-hundredth, so .
Always divide by (move the decimal point two places to the left) when converting centimeters to meters.
CORRECTED PATH
ACEpath Teacher's Demonstration;
03 The student incorrectly adds the dissolved mineral concentration directly to pure water density without converting units, using an erroneous fluid density.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
The problem already provided the resulting bulk fluid density as . You do not need to calculate the mixture density from scratch; you only need to convert to SI units by multiplying by .
- Step 2
- Step 3Correct
You applied the hydrostatic formula correctly, but the numerical result is affected by the incorrect fluid density from Step 1.
- Step 4Correct
You correctly added atmospheric pressure to gauge pressure, but your final answer reflects the carried-over density error.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified and applied the hydrostatic pressure formula .
You converted barometric pressure from to pascals and depth from centimeters to meters accurately.
You correctly recognized that total absolute pressure equals atmospheric pressure plus hydrostatic gauge pressure.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated the concentration value as and added it to water's density, overlooking that the bulk density was already explicitly given.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking explicitly stated physical values in multi-clause problem statements, leading to an unnecessary recalculation of fluid density with incompatible units.
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify Given Quantities
Read the entire problem statement carefully to verify whether final mixture properties (such as bulk density) are already supplied before attempting to compute them.
Look for phrases like 'resulting in a bulk fluid density of...' to avoid unneeded and error-prone mixture calculations.
- Density Unit Conversion
.
Convert densities given in directly to SI units by multiplying by .
CORRECTED PATH
ACEpath Teacher's DemonstrationSubstitute the correct fluid density into the hydrostatic gauge pressure formula: .
Add the surface atmospheric pressure to find the total absolute pressure: .
;
Lock it in
What is the difference between hydrostatic gauge pressure and total absolute pressure at a depth in an open liquid?
is the pressure caused solely by the weight of the fluid column, whereas includes the surface atmospheric pressure.
Similar question
A freshwater research tank (density ) is open to the atmosphere where . Calculate the total absolute pressure in kilopascals at a depth of . Use .
Answer
(or to three significant figures).
An open barrel is filled to a height of with olive oil of density . If ambient pressure is () and , find: (a) the fluid density in , (b) the gauge pressure at the bottom in , and (c) the absolute pressure at the bottom in .
Answer
(a) . (b) . (c) .
A submersible vessel operates in seawater (density ). If the atmospheric surface pressure is (), determine the depth in meters at which the total absolute pressure reaches exactly . Use .
Answer
. . .