Resources

A horizontal square motor loop with side length s=0.150 ms = 0.150\text{ m} lies in the xyxy-plane with its rotation axle along the yy-axis. A current I=4.00 AI = 4.00\text{ A} flows through the segment located at x=+0.075 mx = +0.075\text{ m} in the +y+y-direction (parallel to j^\hat{j}) and returns through the segment at x=−0.075 mx = -0.075\text{ m} in the −y-y-direction (parallel to −j^-\hat{j}). A uniform external magnetic field B⃗=0.500i^ T\vec{B} = 0.500\hat{i}\text{ T} is directed along the +x+x-axis. Using the magnetic force law F⃗=I(L⃗×B⃗)\vec{F} = I(\vec{L} \times \vec{B}) and torque definition τ⃗=μ⃗×B⃗\vec{\tau} = \vec{\mu} \times \vec{B}, evaluate: (a) the vector magnetic force acting on the wire segment at x=+0.075 mx = +0.075\text{ m}, (b) the vector magnetic force acting on the wire segment at x=−0.075 mx = -0.075\text{ m}, and (c) the net vector torque τ⃗net\vec{\tau}_{\text{net}} acting on the loop about the yy-axis, identifying whether rotation is clockwise or counter-clockwise when viewed looking along +y+y toward the origin.

Answer and steps

Final answer

(a) F⃗right=−0.300k^ N\vec{F}_{\text{right}} = -0.300\hat{k}\text{ N}; (b) F⃗left=+0.300k^ N\vec{F}_{\text{left}} = +0.300\hat{k}\text{ N}; (c) τ⃗net=−0.0450j^ N⋅m\vec{\tau}_{\text{net}} = -0.0450\hat{j}\text{ N}\cdot\text{m}, which corresponds to clockwise rotation about the yy-axis when viewed looking down the positive yy-axis toward the origin.

Steps

01

Magnetic Force on the Right Wire Segment (x=+0.075 mx = +0.075\text{ m})

The magnetic force on a straight current-carrying wire of length vector L⃗\vec{L} in a uniform magnetic field B⃗\vec{B} is given by: F⃗=I(L⃗×B⃗)\vec{F} = I(\vec{L} \times \vec{B})

For the segment located at x=+0.075 mx = +0.075\text{ m}:

  • Current: I=4.00 AI = 4.00\text{ A}
  • Length vector along the +y+y-direction: L⃗right=sj^=0.150j^ m\vec{L}_{\text{right}} = s\hat{j} = 0.150\hat{j}\text{ m}
  • Magnetic field along the +x+x-direction: B⃗=0.500i^ T\vec{B} = 0.500\hat{i}\text{ T}

Using the cross product j^×i^=−k^\hat{j} \times \hat{i} = -\hat{k}: F⃗right=4.00(0.150j^×0.500i^)=4.00⋅0.150⋅0.500(j^×i^)=−0.300k^ N\vec{F}_{\text{right}} = 4.00(0.150\hat{j} \times 0.500\hat{i}) = 4.00 \cdot 0.150 \cdot 0.500 (\hat{j} \times \hat{i}) = -0.300\hat{k}\text{ N}


02

Magnetic Force on the Left Wire Segment (x=−0.075 mx = -0.075\text{ m})

For the segment located at x=−0.075 mx = -0.075\text{ m}, the current flows in the opposite direction (−y-y):

  • Length vector: L⃗left=−sj^=−0.150j^ m\vec{L}_{\text{left}} = -s\hat{j} = -0.150\hat{j}\text{ m}

Using the cross product (−j^)×i^=+k^(-\hat{j}) \times \hat{i} = +\hat{k}: F⃗left=4.00(−0.150j^×0.500i^)=+0.300k^ N\vec{F}_{\text{left}} = 4.00(-0.150\hat{j} \times 0.500\hat{i}) = +0.300\hat{k}\text{ N}

(Note: For the top and bottom segments lying along the xx-axis, the current is parallel or antiparallel to B⃗\vec{B}, so L⃗×B⃗=0⃗\vec{L} \times \vec{B} = \vec{0}, producing zero magnetic force.)


03

Net Vector Torque and Sense of Rotation

The magnitude of the magnetic dipole moment of the square loop is: μ=IA=Is2=(4.00 A)(0.150 m)2=0.0900 A⋅m2\mu = I A = I s^2 = (4.00\text{ A})(0.150\text{ m})^2 = 0.0900\text{ A}\cdot\text{m}^2

The magnitude of the torque exerted on the loop about the rotation axis (yy-axis) is: τnet=μB=(0.0900 A⋅m2)(0.500 T)=0.0450 N⋅m\tau_{\text{net}} = \mu B = (0.0900\text{ A}\cdot\text{m}^2)(0.500\text{ T}) = 0.0450\text{ N}\cdot\text{m}

Alternatively, calculating torque as the couple formed by the two forces about the rotation axis (yy-axis) with lever arms r=0.075 mr = 0.075\text{ m}: τnet=Fright⋅r+Fleft⋅r=(0.300 N)(0.075 m)+(0.300 N)(0.075 m)=0.0450 N⋅m\tau_{\text{net}} = F_{\text{right}} \cdot r + F_{\text{left}} \cdot r = (0.300\text{ N})(0.075\text{ m}) + (0.300\text{ N})(0.075\text{ m}) = 0.0450\text{ N}\cdot\text{m}

Sense of Rotation:

  • The right wire (x=+0.075 mx = +0.075\text{ m}) experiences a downward force in the −k^-\hat{k} direction.
  • The left wire (x=−0.075 mx = -0.075\text{ m}) experiences an upward force in the +k^+\hat{k} direction.
  • Looking down the positive yy-axis toward the origin, the force pushes the right side down and the left side up, causing a clockwise rotation about the yy-axis.
  • In vector notation, a clockwise rotation about the axis viewed looking down +y+y toward the origin points in the −j^-\hat{j} direction: τ⃗net=−0.0450j^ N⋅m\vec{\tau}_{\text{net}} = -0.0450\hat{j}\text{ N}\cdot\text{m}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the cross-product order ĵ × î = -k̂ with î × ĵ = +k̂, leading to an incorrect sign for both forces and the torque.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    F1=IL1×B=(4.00)(0.150j^)×(0.500i^)  ⟹  Since j^×i^=k^,  F1=+0.300k^ NF_1 = IL_1 \times B = (4.00)(0.150\hat{j}) \times (0.500\hat{i}) \implies \text{Since } \hat{j} \times \hat{i} = \hat{k},\; F_1 = +0.300\hat{k}\text{ N}

    Correct

    F⃗1=I(L⃗1×B⃗)=(4.00 A)(0.150j^ m)×(0.500i^ T)=−0.300k^ N\vec{F}_1 = I(\vec{L}_1 \times \vec{B}) = (4.00\text{ A})(0.150\hat{j}\text{ m}) \times (0.500\hat{i}\text{ T}) = -0.300\hat{k}\text{ N}

    You wrote that j^×i^=+k^\hat{j} \times \hat{i} = +\hat{k}, but the vector cross product is anticommutative: j^×i^=−(i^×j^)=−k^\hat{j} \times \hat{i} = -(\hat{i} \times \hat{j}) = -\hat{k}. Therefore, the magnetic force on the right wire segment is F⃗1=−0.300k^ N\vec{F}_1 = -0.300\hat{k}\text{ N}.

  2. Step 2

    F2=IL2×B=(4.00)(−0.150j^)×(0.500i^)  ⟹  F2=−0.300k^ NF_2 = IL_2 \times B = (4.00)(-0.150\hat{j}) \times (0.500\hat{i}) \implies F_2 = -0.300\hat{k}\text{ N}

    Correct

    F⃗2=I(L⃗2×B⃗)=(4.00 A)(−0.150j^ m)×(0.500i^ T)=+0.300k^ N\vec{F}_2 = I(\vec{L}_2 \times \vec{B}) = (4.00\text{ A})(-0.150\hat{j}\text{ m}) \times (0.500\hat{i}\text{ T}) = +0.300\hat{k}\text{ N}

    You correctly set the length vector in the negative yy-direction, but using the incorrect cross-product sign rule carried over from the previous step produced −0.300k^ N-0.300\hat{k}\text{ N} instead of (−j^)×i^=−(j^×i^)=−(−k^)=+k^(-\hat{j}) \times \hat{i} = -(\hat{j} \times \hat{i}) = -(-\hat{k}) = +\hat{k}.

  3. Step 3

    τ=r1×F1+r2×F2=(0.075i^)×(0.300k^)+(−0.075i^)×(−0.300k^)  ⟹  τ=−0.0225j^−0.0225j^=−0.0450j^ N⋅m  ⟹  Clockwise rotation when viewed looking along +y toward the origin\tau = r_1 \times F_1 + r_2 \times F_2 = (0.075\hat{i}) \times (0.300\hat{k}) + (-0.075\hat{i}) \times (-0.300\hat{k}) \implies \tau = -0.0225\hat{j} - 0.0225\hat{j} = -0.0450\hat{j}\text{ N}\cdot\text{m} \implies \text{Clockwise rotation when viewed looking along } +y \text{ toward the origin}

    Correct

    τ⃗net=−0.0450j^ N⋅m\vec{\tau}_{\text{net}} = -0.0450\hat{j}\text{ N}\cdot\text{m}, which corresponds to clockwise rotation about the yy-axis when viewed looking down the positive yy-axis toward the origin.

    Your cross-product evaluation for torque was algebraically consistent with the force values you substituted, but it relied on the inverted force signs from parts (a) and (b).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled and applied the magnetic force law F⃗=I(L⃗×B⃗)\vec{F} = I(\vec{L} \times \vec{B}).

You accurately identified the position vectors and lever arms for the two active segments of the motor loop.

You correctly computed torque using the sum of individual r⃗×F⃗\vec{r} \times \vec{F} terms.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Vector Cross Product Anticommutativity

You assumed j^×i^=+k^\hat{j} \times \hat{i} = +\hat{k} instead of applying the right-hand rule order j^×i^=−k^\hat{j} \times \hat{i} = -\hat{k}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusion regarding the cyclic order of standard unit vectors in a right-handed Cartesian coordinate system: traversing i^→j^→k^→i^\hat{i} \to \hat{j} \to \hat{k} \to \hat{i} yields positive products, while reversing the order introduces a negative sign.

REASONING PATH
Your ACEpath teacher’s suggested approach
Cyclic Unit Vector Rule
  • In a right-handed system, i^×j^=k^\hat{i} \times \hat{j} = \hat{k}, j^×k^=i^\hat{j} \times \hat{k} = \hat{i}, and k^×i^=j^\hat{k} \times \hat{i} = \hat{j}. Any reversal negates the result: A⃗×B⃗=−(B⃗×A⃗)\vec{A} \times \vec{B} = -(\vec{B} \times \vec{A}).

  • Always verify the cross-product direction using the right-hand rule: point your fingers along the first vector, curl toward the second, and check the direction your thumb points.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Evaluate the cross product for the segment at x=+0.075 mx = +0.075\text{ m}: F⃗1=4.00(0.150j^×0.500i^)=4.00(0.150)(0.500)(j^×i^)=−0.300k^ N\vec{F}_1 = 4.00(0.150\hat{j} \times 0.500\hat{i}) = 4.00(0.150)(0.500)(\hat{j} \times \hat{i}) = -0.300\hat{k}\text{ N}.

  2. Evaluate the cross product for the segment at x=−0.075 mx = -0.075\text{ m}: F⃗2=4.00(−0.150j^×0.500i^)=+0.300k^ N\vec{F}_2 = 4.00(-0.150\hat{j} \times 0.500\hat{i}) = +0.300\hat{k}\text{ N}.

  3. Evaluate net torque: τ⃗net=−0.0450j^ N⋅m\vec{\tau}_{\text{net}} = -0.0450\hat{j}\text{ N}\cdot\text{m}, indicating clockwise rotation when viewed looking down +y+y toward the origin.

Final answer

(a) F⃗right=−0.300k^ N\vec{F}_{\text{right}} = -0.300\hat{k}\text{ N}; (b) F⃗left=+0.300k^ N\vec{F}_{\text{left}} = +0.300\hat{k}\text{ N}; (c) τ⃗net=−0.0450j^ N⋅m\vec{\tau}_{\text{net}} = -0.0450\hat{j}\text{ N}\cdot\text{m} (clockwise rotation viewed along +y+y toward origin)

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a cyclic circle with i^→j^→k^\hat{i} \to \hat{j} \to \hat{k} clockwise before expanding cross products in coordinate components.

  • Double-check each component vector direction with your physical right hand before proceeding to torque calculations.

OverviewACEpath Teacher's Diagnosis

02 The student uses the total loop side length s instead of the moment arm distance from the rotation axle (s/2), doubling the calculated net torque.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    F1=(4.00)(0.150j^)×(0.500i^)=−0.300k^ NF_1 = (4.00)(0.150\hat{j}) \times (0.500\hat{i}) = -0.300\hat{k}\text{ N}

  2. Step 2

    F2=(4.00)(−0.150j^)×(0.500i^)=+0.300k^ NF_2 = (4.00)(-0.150\hat{j}) \times (0.500\hat{i}) = +0.300\hat{k}\text{ N}

  3. Step 3

    τnet=2×(s×F)=2×(0.150i^×−0.300k^)  ⟹  τnet=+0.0900j^ N⋅m\tau_{\text{net}} = 2 \times (s \times F) = 2 \times (0.150\hat{i} \times -0.300\hat{k}) \implies \tau_{\text{net}} = +0.0900\hat{j}\text{ N}\cdot\text{m}

    Correct

    τ⃗net=2(s2i^×F⃗right)=2(0.075i^×−0.300k^)=−0.0450j^ N⋅m\vec{\tau}_{\text{net}} = 2 \left(\frac{s}{2}\hat{i} \times \vec{F}_{\text{right}}\right) = 2(0.075\hat{i} \times -0.300\hat{k}) = -0.0450\hat{j}\text{ N}\cdot\text{m}

    You used the total loop width s=0.150 ms = 0.150\text{ m} as the position vector from the axle for each wire, but the rotation axis lies along the center (yy-axis). The lever arm distance from the axle to each wire is r=s/2=0.075 mr = s/2 = 0.075\text{ m}. Multiplying by 2 while using the full width ss doubles the true torque.

  4. Step 4

    Counter-clockwise rotation when viewed looking along +y+y toward the origin

    Correct

    Clockwise rotation when viewed looking along +y+y toward the origin

    Because the right segment at x=+0.075 mx = +0.075\text{ m} is pushed downward (−k^-\hat{k}) and the left segment at x=−0.075 mx = -0.075\text{ m} is pushed upward (+k^+\hat{k}), viewing the loop from positive yy looking toward the origin shows a clockwise rotation.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the magnetic force on the right wire segment.

You correctly calculated the magnetic force on the left wire segment.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Moment Arm vs Total Width Confusion

You substituted the full loop side length s=0.150 ms = 0.150\text{ m} instead of the half-width r=0.075 mr = 0.075\text{ m} when summing torques from both sides about the central axle.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the total distance between two parallel force vectors (the couple arm) with the distance of each individual force from the central axis of rotation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define the Rotation Axis First
  • For an object rotating about a central axis, the position vector r⃗\vec{r} for each force must be measured from the rotation axis, not from the opposite edge.

  • Check whether the axis is along an edge (r=sr = s) or through the center (r=s/2r = s/2) before writing τ⃗=r⃗×F⃗\vec{\tau} = \vec{r} \times \vec{F}.

Torque of a Couple
  • For two equal and opposite forces separated by total width ss, the net torque magnitude is τ=F⋅s\tau = F \cdot s, or equivalently τ=2⋅F⋅(s/2)\tau = 2 \cdot F \cdot (s/2).

  • Either multiply one force by the total separation ss, or multiply the force by s/2s/2 and double it; never do both.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the lever arm vector from the yy-axis to the right wire: r⃗right=+0.075i^ m\vec{r}_{\text{right}} = +0.075\hat{i}\text{ m}.

  2. Calculate the torque from both symmetric wire segments: τ⃗net=r⃗right×F⃗right+r⃗left×F⃗left=2(0.075i^×−0.300k^)\vec{\tau}_{\text{net}} = \vec{r}_{\text{right}} \times \vec{F}_{\text{right}} + \vec{r}_{\text{left}} \times \vec{F}_{\text{left}} = 2(0.075\hat{i} \times -0.300\hat{k}).

  3. Evaluate the torque vector and determine the physical sense of rotation: looking down +y+y toward the origin, the right side moves down and the left side moves up, corresponding to clockwise rotation.

Final answer

(a) F⃗right=−0.300k^ N\vec{F}_{\text{right}} = -0.300\hat{k}\text{ N}; (b) F⃗left=+0.300k^ N\vec{F}_{\text{left}} = +0.300\hat{k}\text{ N}; (c) τ⃗net=−0.0450j^ N⋅m\vec{\tau}_{\text{net}} = -0.0450\hat{j}\text{ N}\cdot\text{m}, clockwise rotation when viewed looking along +y+y toward the origin.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice sketching the rotation axis and drawing radial vectors r⃗\vec{r} directly from the axis to each wire segment.

  • Verify torque calculations using both methods: the magnetic dipole formula τ⃗=μ⃗×B⃗\vec{\tau} = \vec{\mu} \times \vec{B} and the mechanical couple formula τ=F⋅s\tau = F \cdot s.

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets viewing along the +y axis toward the origin as looking in the +ĵ direction rather than toward -ĵ, reversing the deduced rotational direction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    F1=I(L1×B)=(4.00)(0.150j^)×(0.500i^)=−0.300k^ NF_1 = I(L_1 \times B) = (4.00)(0.150\hat{j}) \times (0.500\hat{i}) = -0.300\hat{k}\text{ N}

  2. Step 2

    F2=I(L2×B)=(4.00)(−0.150j^)×(0.500i^)=+0.300k^ NF_2 = I(L_2 \times B) = (4.00)(-0.150\hat{j}) \times (0.500\hat{i}) = +0.300\hat{k}\text{ N}

  3. Step 3

    μ=IAk^=(4.00)(0.150)2k^=0.0900k^ A⋅m2  ⟹  τnet=μ×B=(0.0900k^)×(0.500i^)=+0.0450j^ N⋅m\mu = IA\hat{k} = (4.00)(0.150)^2\hat{k} = 0.0900\hat{k}\text{ A}\cdot\text{m}^2 \implies \tau_{\text{net}} = \mu \times B = (0.0900\hat{k}) \times (0.500\hat{i}) = +0.0450\hat{j}\text{ N}\cdot\text{m}

  4. Step 4

    Looking along +y+y toward the origin means looking along +j^+\hat{j}, so a +j^+\hat{j} torque points away from the viewer, giving clockwise rotation

    Correct

    Looking along +y+y toward the origin means the line of sight is directed along −j^-\hat{j}. The torque τ⃗net=+0.0450j^ N⋅m\vec{\tau}_{\text{net}} = +0.0450\hat{j}\text{ N}\cdot\text{m} points toward the observer, which corresponds to counter-clockwise rotation.

    An observer stationed on the positive yy-axis looking toward the origin looks in the −j^-\hat{j} direction. Because τ⃗net=+0.0450j^ N⋅m\vec{\tau}_{\text{net}} = +0.0450\hat{j}\text{ N}\cdot\text{m} points along +j^+\hat{j}, it points directly out toward the observer, which corresponds to counter-clockwise rotation by the right-hand rule.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the Lorentz force formula F⃗=I(L⃗×B⃗)\vec{F} = I(\vec{L} \times \vec{B}) for both conducting wire segments.

You correctly calculated the magnetic dipole moment μ⃗\vec{\mu} and obtained the torque vector τ⃗net=+0.0450j^ N⋅m\vec{\tau}_{\text{net}} = +0.0450\hat{j}\text{ N}\cdot\text{m}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Line-of-Sight Misinterpretation

You treated 'looking along +y+y toward the origin' as looking in the +j^+\hat{j} direction rather than toward −j^-\hat{j}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated being positioned on the positive coordinate axis with looking in the positive unit vector direction. Looking from +y+y toward the origin means your gaze points toward negative yy (−j^-\hat{j}). Consequently, a +j^+\hat{j} torque vector points toward the viewer rather than away, reversing the deduced rotational sense from counter-clockwise to clockwise.

REASONING PATH
Your ACEpath teacher’s suggested approach
Observer Line-of-Sight Vector
  • A viewing direction from point AA toward point BB has the displacement vector direction r⃗B−r⃗A\vec{r}_B - \vec{r}_A.

  • For an observer located at +y+y looking at the origin (0,0,0)(0,0,0), set the viewing vector as v⃗view=−j^\vec{v}_{\text{view}} = -\hat{j}.

Right-Hand Rule for Rotation Sense
  • If an axial vector points toward the observer, the rotation appears counter-clockwise; if it points away, it appears clockwise.

  • Point your right thumb along the torque vector τ⃗=+0.0450j^\vec{\tau} = +0.0450\hat{j} (toward the observer at +y+y); the curled fingers indicate counter-clockwise rotation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Define the observer's line-of-sight vector: standing on the positive yy-axis and looking toward the origin means looking along −j^-\hat{j}.

  2. Compare the torque vector τ⃗net=+0.0450j^ N⋅m\vec{\tau}_{\text{net}} = +0.0450\hat{j}\text{ N}\cdot\text{m} with the line of sight: since it points in the +j^+\hat{j} direction, it points directly toward the viewer.

  3. Apply the right-hand grip rule with your thumb pointing toward you: your fingers curl in the counter-clockwise direction.

Final answer

(a) F⃗right=−0.300k^ N\vec{F}_{\text{right}} = -0.300\hat{k}\text{ N}; (b) F⃗left=+0.300k^ N\vec{F}_{\text{left}} = +0.300\hat{k}\text{ N}; (c) τ⃗net=+0.0450j^ N⋅m\vec{\tau}_{\text{net}} = +0.0450\hat{j}\text{ N}\cdot\text{m}, rotating counter-clockwise when viewed looking along +y+y toward the origin.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice defining line-of-sight unit vectors from observer descriptions before applying the right-hand grip rule.

  • Verify rotational directions by checking physical motion: the right wire (x>0x > 0) moves in −k^-\hat{k} (down) and the left wire (x<0x < 0) moves in +k^+\hat{k} (up), which turns counter-clockwise when viewed looking toward the origin from +y+y.

Lock it in

Similar question

01

A straight wire segment carrying current I=2.50 AI = 2.50\text{ A} lies along the +z+z-axis with length vector L⃗=0.200k^ m\vec{L} = 0.200\hat{k}\text{ m}. A uniform magnetic field B⃗=0.400j^ T\vec{B} = 0.400\hat{j}\text{ T} is present. Calculate the vector magnetic force F⃗=I(L⃗×B⃗)\vec{F} = I(\vec{L} \times \vec{B}) acting on the wire.

Answer

F⃗=−0.200i^ N\vec{F} = -0.200\hat{i}\text{ N}. Using F⃗=I(L⃗×B⃗)=(2.50 A)(0.200k^ m×0.400j^ T)=2.50×0.200×0.400(k^×j^)\vec{F} = I(\vec{L} \times \vec{B}) = (2.50\text{ A})(0.200\hat{k}\text{ m} \times 0.400\hat{j}\text{ T}) = 2.50 \times 0.200 \times 0.400 (\hat{k} \times \hat{j}). Since k^×j^=−i^\hat{k} \times \hat{j} = -\hat{i}, F⃗=−0.200i^ N\vec{F} = -0.200\hat{i}\text{ N}.

02

A planar loop carrying current has magnetic dipole moment μ⃗=0.500i^ A⋅m2\vec{\mu} = 0.500\hat{i}\text{ A}\cdot\text{m}^2 and experiences a uniform magnetic field B⃗=1.20k^ T\vec{B} = 1.20\hat{k}\text{ T}. Find the vector torque τ⃗=μ⃗×B⃗\vec{\tau} = \vec{\mu} \times \vec{B} exerted on the loop.

Answer

τ⃗=−0.600j^ N⋅m\vec{\tau} = -0.600\hat{j}\text{ N}\cdot\text{m}. Compute τ⃗=(0.500i^)×(1.20k^)=(0.500)(1.20)(i^×k^)\vec{\tau} = (0.500\hat{i}) \times (1.20\hat{k}) = (0.500)(1.20)(\hat{i} \times \hat{k}). Because i^×k^=−j^\hat{i} \times \hat{k} = -\hat{j}, τ⃗=−0.600j^ N⋅m\vec{\tau} = -0.600\hat{j}\text{ N}\cdot\text{m}.

03

A rectangular coil of dimensions 0.100 m×0.200 m0.100\text{ m} \times 0.200\text{ m} lies in the yzyz-plane. A current I=3.00 AI = 3.00\text{ A} flows such that its magnetic moment is along the +x+x-direction, μ⃗=0.0600i^ A⋅m2\vec{\mu} = 0.0600\hat{i}\text{ A}\cdot\text{m}^2. A magnetic field B⃗=0.800i^+0.600j^ T\vec{B} = 0.800\hat{i} + 0.600\hat{j}\text{ T} is applied. Find the net vector torque on the coil.

Answer

τ⃗=+0.0360k^ N⋅m\vec{\tau} = +0.0360\hat{k}\text{ N}\cdot\text{m}. Torque is τ⃗=μ⃗×B⃗=(0.0600i^)×(0.800i^+0.600j^)\vec{\tau} = \vec{\mu} \times \vec{B} = (0.0600\hat{i}) \times (0.800\hat{i} + 0.600\hat{j}). Since i^×i^=0⃗\hat{i} \times \hat{i} = \vec{0} and i^×j^=k^\hat{i} \times \hat{j} = \hat{k}, τ⃗=(0.0600)(0.600)k^=+0.0360k^ N⋅m\vec{\tau} = (0.0600)(0.600)\hat{k} = +0.0360\hat{k}\text{ N}\cdot\text{m}.

Loading workspace…