Resources

A glider of mass m=0.250 kgm = 0.250\text{ kg} is attached to an ideal horizontal spring on a frictionless air track. The glider oscillates in simple harmonic motion with an amplitude of A=0.0800 mA = 0.0800\text{ m} and an angular frequency of ω=15.0 rad/s\omega = 15.0\text{ rad/s}. Determine the ratio of the system's kinetic energy to its potential energy, KU\frac{K}{U}, when the glider is located at a position x=0.0320 mx = 0.0320\text{ m} from equilibrium.

Answer and steps

Final answer

KU=5.25\frac{K}{U} = 5.25

Steps

01

Express potential energy and total mechanical energy

To find the ratio of the kinetic energy to the potential energy, KU\frac{K}{U}, we can express both energies in terms of the position xx and the amplitude AA.

For an ideal horizontal mass-spring oscillator with spring constant kk:

  • The elastic potential energy at any displacement xx from equilibrium is: U=12kx2U = \frac{1}{2}kx^2
  • The total mechanical energy EE is conserved and equals the maximum potential energy at the turning point x=Ax = A: E=12kA2E = \frac{1}{2}kA^2
02

Express kinetic energy in terms of position

By conservation of mechanical energy, the kinetic energy KK at position xx is the total energy minus the potential energy: K=E−U=12kA2−12kx2=12k(A2−x2)K = E - U = \frac{1}{2}kA^2 - \frac{1}{2}kx^2 = \frac{1}{2}k\left(A^2 - x^2\right)

03

Formulate and evaluate the ratio KU\frac{K}{U}

Taking the ratio of KK to UU: KU=12k(A2−x2)12kx2=A2−x2x2=(Ax)2−1\frac{K}{U} = \frac{\frac{1}{2}k\left(A^2 - x^2\right)}{\frac{1}{2}kx^2} = \frac{A^2 - x^2}{x^2} = \left(\frac{A}{x}\right)^2 - 1

Notice that the spring constant kk, mass mm, and angular frequency ω\omega all cancel out, meaning the ratio depends solely on the positions:

  1. Calculate the ratio Ax\frac{A}{x}: Ax=0.0800 m0.0320 m=2.5\frac{A}{x} = \frac{0.0800\text{ m}}{0.0320\text{ m}} = 2.5
  2. Substitute this value into the expression for KU\frac{K}{U}: KU=(2.5)2−1=6.25−1=5.25\frac{K}{U} = (2.5)^2 - 1 = 6.25 - 1 = 5.25

Pitfall to Avoid: It is tempting to calculate k=mω2k = m\omega^2, followed by explicit numerical values for KK and UU in joules. While this gives the correct result, it introduces unnecessary arithmetic steps and rounding risks. Recognizing that energy in simple harmonic motion scales with the square of the displacement allows a direct algebraic simplification.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to square the amplitude and position when forming the energy ratio, setting K/U equal to (A - x)/x instead of (A² - x²)/x².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    K=E−UK = E - U

  2. Step 2

    KU=A−xx\frac{K}{U} = \frac{A - x}{x}

    Correct

    KU=12k(A2−x2)12kx2=A2−x2x2\frac{K}{U} = \frac{\frac{1}{2}k(A^2 - x^2)}{\frac{1}{2}kx^2} = \frac{A^2 - x^2}{x^2}

    Elastic potential energy and total mechanical energy are proportional to the square of displacement (U=12kx2U = \frac{1}{2}kx^2 and E=12kA2E = \frac{1}{2}kA^2), not linear in displacement. Therefore, the ratio must use (A2−x2)/x2(A^2 - x^2)/x^2 rather than (A−x)/x(A - x)/x.

  3. Step 3

    KU=0.0800−0.03200.0320  ⟹  KU=0.04800.0320=1.5\frac{K}{U} = \frac{0.0800 - 0.0320}{0.0320} \implies \frac{K}{U} = \frac{0.0480}{0.0320} = 1.5

    Correct

    KU=(0.0800)2−(0.0320)2(0.0320)2=(0.08000.0320)2−1=(2.5)2−1=5.25\frac{K}{U} = \frac{(0.0800)^2 - (0.0320)^2}{(0.0320)^2} = \left(\frac{0.0800}{0.0320}\right)^2 - 1 = (2.5)^2 - 1 = 5.25

    You evaluated your linear formula accurately, but the result is incorrect because it inherited the missing squares from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that total mechanical energy is conserved and that K=E−UK = E - U.

You correctly identified the given values for amplitude AA and position xx.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear Energy Dependence Error

You forgot to square the displacement terms when substituting the energy formulas into the ratio.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated potential energy as scaling linearly with position (U∝xU \propto x) rather than quadratically (U=12kx2U = \frac{1}{2}kx^2), confusing displacement differences with energy differences.

REASONING PATH
Your ACEpath teacher’s suggested approach
Quadratic Energy Dependence
  • For a simple harmonic oscillator, both potential energy U=12kx2U = \frac{1}{2}kx^2 and total energy E=12kA2E = \frac{1}{2}kA^2 depend on the square of position and amplitude.

  • Always write out the explicit definitions of EE and UU before canceling common factors like 12k\frac{1}{2}k.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the quadratic forms into the ratio: KU=E−UU=12kA2−12kx212kx2=A2−x2x2=(Ax)2−1\frac{K}{U} = \frac{E - U}{U} = \frac{\frac{1}{2}kA^2 - \frac{1}{2}kx^2}{\frac{1}{2}kx^2} = \frac{A^2 - x^2}{x^2} = \left(\frac{A}{x}\right)^2 - 1.

  2. Compute the displacement ratio: Ax=0.0800 m0.0320 m=2.5\frac{A}{x} = \frac{0.0800\text{ m}}{0.0320\text{ m}} = 2.5.

  3. Square this ratio and subtract 11: KU=(2.5)2−1=6.25−1=5.25\frac{K}{U} = (2.5)^2 - 1 = 6.25 - 1 = 5.25.

Final answer

KU=5.25\frac{K}{U} = 5.25

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how Hooke's law leads to a quadratic potential energy function via U=∫kx dx=12kx2U = \int kx\,dx = \frac{1}{2}kx^2.

  • Practice writing the energy ratio in the form (Ax)2−1\left(\frac{A}{x}\right)^2 - 1 to simplify calculations in future oscillator problems.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the ratio of kinetic energy to total mechanical energy, K/E, rather than the ratio of kinetic energy to potential energy, K/U.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    E=(12)kA2  ⟹  U=(12)kx2  ⟹  K=(12)k(A2−x2)E = \left(\frac{1}{2}\right)kA^2 \implies U = \left(\frac{1}{2}\right)kx^2 \implies K = \left(\frac{1}{2}\right)k(A^2 - x^2)

  2. Step 2

    Ratio=KE=A2−x2A2=1−(xA)2\text{Ratio} = \frac{K}{E} = \frac{A^2 - x^2}{A^2} = 1 - \left(\frac{x}{A}\right)^2

    Correct

    Ratio=KU=12k(A2−x2)12kx2=A2−x2x2=(Ax)2−1\text{Ratio} = \frac{K}{U} = \frac{\frac{1}{2}k(A^2 - x^2)}{\frac{1}{2}kx^2} = \frac{A^2 - x^2}{x^2} = \left(\frac{A}{x}\right)^2 - 1

    The question asked for the ratio of kinetic energy to potential energy (KU\frac{K}{U}), but you set up the ratio of kinetic energy to total mechanical energy (KE\frac{K}{E}).

  3. Step 3

    Ratio=1−(0.03200.0800)2=1−0.16=0.84\text{Ratio} = 1 - \left(\frac{0.0320}{0.0800}\right)^2 = 1 - 0.16 = 0.84

    Correct

    KU=(0.08000.0320)2−1=(2.5)2−1=6.25−1=5.25\frac{K}{U} = \left(\frac{0.0800}{0.0320}\right)^2 - 1 = (2.5)^2 - 1 = 6.25 - 1 = 5.25

    Your arithmetic is correct for K/EK/E, but it leads to an incorrect final value because of the denominator setup in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly wrote down the algebraic formulas for total energy, potential energy, and kinetic energy in terms of displacement and amplitude.

You accurately recognized that constants such as mm, kk, and ω\omega cancel out when forming energy ratios in simple harmonic motion.

You correctly computed the numerical value of (x/A)2(x/A)^2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Target Variable Misidentification

You set the denominator as total energy EE instead of potential energy UU.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the fractional kinetic energy of the total system (K/EK/E) with the energy partition ratio between the two forms of energy (K/UK/U).

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify the Requested Ratio
  • Always double-check whether a question asks for a component-to-total fraction (partwhole\frac{\text{part}}{\text{whole}}, such as KE\frac{K}{E}) or a component-to-component comparison (partpart\frac{\text{part}}{\text{part}}, such as KU\frac{K}{U}).

  • Underline or re-read the exact fraction requested in the problem before defining the ratio formula.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. KU=12k(A2−x2)12kx2=A2−x2x2=(Ax)2−1\frac{K}{U} = \frac{\frac{1}{2}k(A^2 - x^2)}{\frac{1}{2}kx^2} = \frac{A^2 - x^2}{x^2} = \left(\frac{A}{x}\right)^2 - 1

  2. Ax=0.0800 m0.0320 m=2.5\frac{A}{x} = \frac{0.0800\text{ m}}{0.0320\text{ m}} = 2.5

  3. KU=(2.5)2−1=6.25−1=5.25\frac{K}{U} = (2.5)^2 - 1 = 6.25 - 1 = 5.25

Final answer

KU=5.25\frac{K}{U} = 5.25

NEXT STEPS
Final Takeaways from Your Teacher
  • Re-read the question prompt specifically checking the denominator of any requested ratio.

  • Practice converting between the ratio KU\frac{K}{U} and the fraction KE\frac{K}{E} using the identity KU=K/E1−K/E\frac{K}{U} = \frac{K/E}{1 - K/E}.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the requested ratio and calculates the ratio of potential energy to kinetic energy, U/K, instead of K/U.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    U=12kx2  ⟹  K=12k(A2−x2)U = \frac{1}{2}kx^2 \implies K = \frac{1}{2}k(A^2 - x^2)

  2. Step 2

    Ratio=x2A2−x2\text{Ratio} = \frac{x^2}{A^2 - x^2}

    Correct

    KU=12k(A2−x2)12kx2=A2−x2x2\frac{K}{U} = \frac{\frac{1}{2}k(A^2 - x^2)}{\frac{1}{2}kx^2} = \frac{A^2 - x^2}{x^2}

    The problem asks for the ratio of kinetic energy to potential energy, KU\frac{K}{U}. Your expression places UU in the numerator and KK in the denominator, which calculates UK\frac{U}{K} instead.

  3. Step 3

    Ratio=(0.0320)2(0.0800)2−(0.0320)2=0.0010240.005376≈0.190\text{Ratio} = \frac{(0.0320)^2}{(0.0800)^2 - (0.0320)^2} = \frac{0.001024}{0.005376} \approx 0.190

    Correct

    KU=(0.0800)2−(0.0320)2(0.0320)2=0.0053760.001024=5.25\frac{K}{U} = \frac{(0.0800)^2 - (0.0320)^2}{(0.0320)^2} = \frac{0.005376}{0.001024} = 5.25

    Your arithmetic was accurate for the fraction you wrote, but the result is the reciprocal of the target quantity because of the inverted ratio in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that potential energy scales with x2x^2 and kinetic energy scales with A2−x2A^2 - x^2.

You canceled the common factor 12k\frac{1}{2}k, which correctly eliminated the need to calculate the spring constant.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted energy ratio

You set up the fraction upside down, evaluating UK\frac{U}{K} instead of the requested ratio KU\frac{K}{U}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Losing track of the target ratio's numerator and denominator during the transition from separate energy formulas to a combined algebraic fraction.

REASONING PATH
Your ACEpath teacher’s suggested approach
Label the target ratio explicitly
  • The phrase 'ratio of AA to BB' always means AB\frac{A}{B}, placing the first mentioned quantity in the numerator.

  • Write the specific symbols KU\frac{K}{U} at the start of your line instead of the generic word 'Ratio'.

Perform an equilibrium sanity check
  • Near the equilibrium position (x<A2≈0.707Ax < \frac{A}{\sqrt{2}} \approx 0.707A), speed is high and potential energy is small, so K>UK > U.

  • Since x=0.0320 m<0.0800 mx = 0.0320\text{ m} < 0.0800\text{ m}, the glider is close to center, meaning KK must exceed UU and the ratio KU\frac{K}{U} must be strictly greater than 11.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the target ratio with explicit symbols: KU=12k(A2−x2)12kx2=A2−x2x2\frac{K}{U} = \frac{\frac{1}{2}k(A^2 - x^2)}{\frac{1}{2}kx^2} = \frac{A^2 - x^2}{x^2}.

  2. Rewrite the expression as a position ratio: KU=(Ax)2−1\frac{K}{U} = \left(\frac{A}{x}\right)^2 - 1.

  3. Substitute the given values: Ax=0.08000.0320=2.5\frac{A}{x} = \frac{0.0800}{0.0320} = 2.5.

  4. Compute the final value: KU=(2.5)2−1=6.25−1=5.25\frac{K}{U} = (2.5)^2 - 1 = 6.25 - 1 = 5.25.

Final answer

KU=5.25\frac{K}{U} = 5.25

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the target quantity's wording before writing algebraic fractions to ensure numerator and denominator match the prompt.

  • Check whether your result should be greater than or less than 11 by comparing displacement xx to the half-energy displacement x=A2x = \frac{A}{\sqrt{2}}.

Lock it in

Similar question

01

A horizontal mass-spring oscillator oscillates with amplitude A=0.10 mA = 0.10\text{ m}. Determine the ratio KU\frac{K}{U} when the mass is at position x=0.050 mx = 0.050\text{ m}.

Answer

KU=3.0\frac{K}{U} = 3.0. Key steps: KU=(Ax)2−1=(0.100.050)2−1=(2)2−1=3\frac{K}{U} = \left(\frac{A}{x}\right)^2 - 1 = \left(\frac{0.10}{0.050}\right)^2 - 1 = (2)^2 - 1 = 3.

02

In a simple harmonic oscillator, at what displacement xx (expressed in terms of amplitude AA) is the kinetic energy equal to twice the potential energy (K=2UK = 2U)?

Answer

x=A3x = \frac{A}{\sqrt{3}} (or x≈0.577Ax \approx 0.577 A). Key steps: Set KU=2  ⟹  (Ax)2−1=2  ⟹  (Ax)2=3  ⟹  x=A3\frac{K}{U} = 2 \implies \left(\frac{A}{x}\right)^2 - 1 = 2 \implies \left(\frac{A}{x}\right)^2 = 3 \implies x = \frac{A}{\sqrt{3}}.

03

A 0.500 kg0.500\text{ kg} object attached to a spring oscillates with an amplitude of 0.120 m0.120\text{ m}. At a certain position xx, the potential energy accounts for 16%16\% of the total mechanical energy. Find the position xx and the ratio KU\frac{K}{U} at this point.

Answer

x=0.048 mx = 0.048\text{ m} and KU=5.25\frac{K}{U} = 5.25. Key steps: Since U=0.16EU = 0.16 E, 12kx2=0.16(12kA2)  ⟹  x=0.16A=0.40(0.120 m)=0.048 m\frac{1}{2}kx^2 = 0.16\left(\frac{1}{2}kA^2\right) \implies x = \sqrt{0.16}A = 0.40(0.120\text{ m}) = 0.048\text{ m}. The kinetic energy is K=0.84EK = 0.84 E, so KU=0.840.16=5.25\frac{K}{U} = \frac{0.84}{0.16} = 5.25.

Loading workspace…