Resources

In a physics laboratory verification of impulse and linear momentum, a low-friction dynamics cart of mass M=0.520 kgM = 0.520\text{ kg} fitted with an electronic force sensor rolls along a level track at an initial velocity of vi=+1.15 m/sv_i = +1.15\text{ m/s}. The cart collides head-on with a fixed bumper at the end of the track. The force sensor logs the contact force over time, yielding a symmetric triangular force pulse F(t)F(t) of base width Δt=36.0 ms\Delta t = 36.0\text{ ms} and peak compressive force Fmax=45.0 NF_{\text{max}} = 45.0\text{ N}. Calculate the total linear impulse JJ imparted to the cart and the cart's final rebound velocity vfv_f immediately after separating from the bumper.

Answer and steps

Final answer

J=−0.810 N⋅sJ = -0.810\text{ N}\cdot\text{s}, vf=−0.408 m/sv_f = -0.408\text{ m/s} (rebounding in the negative direction)

Steps

01

Calculate the magnitude and sign of the impulse

The impulse JJ delivered by a time-varying force F(t)F(t) is the integral of the force over the contact duration, which equals the area under the force-time curve:

J=∫0ΔtF(t) dtJ = \int_{0}^{\Delta t} F(t)\,dt

For a symmetric triangular pulse with base width Δt\Delta t and peak force FmaxF_{\text{max}}, the magnitude of the impulse is given by the area of the triangle:

∣J∣=12⋅base⋅height=12⋅Δt⋅Fmax|J| = \frac{1}{2} \cdot \text{base} \cdot \text{height} = \frac{1}{2} \cdot \Delta t \cdot F_{\text{max}}

Convert the duration to SI units: Δt=36.0 ms=0.0360 s\Delta t = 36.0\text{ ms} = 0.0360\text{ s}

Substitute the given values: ∣J∣=12⋅0.0360 s⋅45.0 N=0.810 N⋅s|J| = \frac{1}{2} \cdot 0.0360\text{ s} \cdot 45.0\text{ N} = 0.810\text{ N}\cdot\text{s}

Direction consideration (Pitfall): The cart travels in the positive direction (vi=+1.15 m/sv_i = +1.15\text{ m/s}). During the collision, the fixed bumper exerts a compressive force against the cart's motion, directed in the negative direction (−x-x). Therefore, the impulse vector is directed opposite to the initial velocity:

J=−0.810 N⋅sJ = -0.810\text{ N}\cdot\text{s}


02

Apply the Impulse-Momentum Theorem to find vfv_f

According to the impulse-momentum theorem, the net impulse acting on an object equals its change in linear momentum:

J=Δp=Mvf−MviJ = \Delta p = M v_f - M v_i

Rearranging the expression to solve for the final rebound velocity vfv_f:

vf=vi+JMv_f = v_i + \frac{J}{M}

Substitute the mass M=0.520 kgM = 0.520\text{ kg}, initial velocity vi=+1.15 m/sv_i = +1.15\text{ m/s}, and impulse J=−0.810 N⋅sJ = -0.810\text{ N}\cdot\text{s}:

vf=1.15 m/s+−0.810 N⋅s0.520 kgv_f = 1.15\text{ m/s} + \frac{-0.810\text{ N}\cdot\text{s}}{0.520\text{ kg}}

vf=1.15 m/s−1.5577 m/s≈−0.408 m/sv_f = 1.15\text{ m/s} - 1.5577\text{ m/s} \approx -0.408\text{ m/s}

The negative sign indicates that the cart reverses direction and rebounds backward at 0.408 m/s0.408\text{ m/s}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats impulse as a scalar or forgets that the force from the bumper opposes the initial velocity, leading to an incorrect positive impulse and an unphysical increase in forward velocity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δt=36.0 ms=0.0360 s  ⟹  J=12⋅Fmax⋅Δt  ⟹  J=12⋅45.0⋅0.0360=0.810 N⋅s\Delta t = 36.0\text{ ms} = 0.0360\text{ s} \implies J = \frac{1}{2} \cdot F_{\text{max}} \cdot \Delta t \implies J = \frac{1}{2} \cdot 45.0 \cdot 0.0360 = 0.810\text{ N}\cdot\text{s}

    Correct

    J=−12FmaxΔt=−0.810 N⋅sJ = -\frac{1}{2} F_{\text{max}} \Delta t = -0.810\text{ N}\cdot\text{s}

    You calculated the magnitude of the triangular impulse accurately as 0.810 N⋅s0.810\text{ N}\cdot\text{s}. However, impulse is a vector quantity. Because the cart is moving in the positive direction (vi=+1.15 m/sv_i = +1.15\text{ m/s}), the compressive normal force exerted by the bumper acts in the opposite direction (−x-x), so the impulse must be negative: J=−0.810 N⋅sJ = -0.810\text{ N}\cdot\text{s}.

  2. Step 2

    J=M(vf−vi)  ⟹  0.810=0.520(vf−1.15)  ⟹  vf−1.15=1.558  ⟹  vf=2.71 m/sJ = M(v_f - v_i) \implies 0.810 = 0.520(v_f - 1.15) \implies v_f - 1.15 = 1.558 \implies v_f = 2.71\text{ m/s}

    Correct

    −0.810=0.520(vf−1.15)  ⟹  vf=1.15−1.558=−0.408 m/s-0.810 = 0.520(v_f - 1.15) \implies v_f = 1.15 - 1.558 = -0.408\text{ m/s}

    You set up the impulse-momentum theorem and solved for vfv_f with correct algebraic steps, but carrying forward the positive sign for JJ resulted in an unphysical forward speed of 2.71 m/s2.71\text{ m/s} rather than a backward rebound velocity of −0.408 m/s-0.408\text{ m/s}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the time duration from milliseconds to seconds.

You used the geometric area of a triangle to find the magnitude of the impulse.

You correctly stated and rearranged the linear impulse-momentum theorem J⃗=Δp⃗\vec{J} = \Delta \vec{p}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error on vector impulse during collision

You calculated the geometric area of the force pulse as a positive scalar without assigning a direction along your chosen coordinate axis.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating impulse and force as scalar quantities rather than signed one-dimensional vectors, overlooking that a barrier pushing back against an oncoming object must exert a force opposite to the object's initial velocity.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define a Coordinate System
  • Before substituting values into J⃗=Δp⃗\vec{J} = \Delta \vec{p}, assign a positive direction (usually the direction of initial motion).

  • Check whether the contact force acts along +x+x or −x-x; if it opposes initial motion, give FF and JJ a negative sign.

Physical Reality Check
  • A passive, fixed barrier cannot propel an oncoming cart forward to a higher speed than it entered with.

  • Ensure the calculated final velocity points away from the wall (vf<0v_f < 0) or is smaller than viv_i for a rebound.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Because the bumper exerts a compressive force to the left (−x-x), write J=−0.810 N⋅sJ = -0.810\text{ N}\cdot\text{s}.

  2. Substitute J=−0.810 N⋅sJ = -0.810\text{ N}\cdot\text{s} into the impulse-momentum theorem: −0.810=0.520(vf−1.15)-0.810 = 0.520(v_f - 1.15).

  3. Divide by mass: vf−1.15=−0.8100.520≈−1.558 m/sv_f - 1.15 = \frac{-0.810}{0.520} \approx -1.558\text{ m/s}.

  4. Add 1.15 m/s1.15\text{ m/s} to both sides: vf=1.15−1.558=−0.408 m/sv_f = 1.15 - 1.558 = -0.408\text{ m/s}.

Final answer

J=−0.810 N⋅sJ = -0.810\text{ N}\cdot\text{s}, vf=−0.408 m/sv_f = -0.408\text{ m/s} (rebounding in the negative direction)

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing a quick free-body diagram during collision to verify the sign of the contact force vector before computing impulse.

  • Always perform a physical sanity check on your final velocity to verify that a rebound changes direction.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the area of the force pulse as a rectangle (F * Δt) rather than a triangle (1/2 * F * Δt), doubling the magnitude of the impulse.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δt=36.0 ms=0.0360 s  ⟹  J=−Fmax⋅Δt=−45.0⋅0.0360=−1.62 N⋅s\Delta t = 36.0\text{ ms} = 0.0360\text{ s} \implies J = -F_{\text{max}} \cdot \Delta t = -45.0 \cdot 0.0360 = -1.62\text{ N}\cdot\text{s}

    Correct

    ∣J∣=12FmaxΔt=12(45.0 N)(0.0360 s)=0.810 N⋅s  ⟹  J=−0.810 N⋅s|J| = \frac{1}{2} F_{\text{max}} \Delta t = \frac{1}{2}(45.0\text{ N})(0.0360\text{ s}) = 0.810\text{ N}\cdot\text{s} \implies J = -0.810\text{ N}\cdot\text{s}

    The problem states that the contact force forms a triangular pulse over time. Impulse is the area under the F(t)F(t) curve, which for a triangle is 12⋅base⋅height\frac{1}{2} \cdot \text{base} \cdot \text{height}, not base⋅height\text{base} \cdot \text{height}.

  2. Step 2

    J=M(vf−vi)  ⟹  −1.62=0.520(vf−1.15)  ⟹  vf−1.15=−3.115  ⟹  vf=−1.97 m/sJ = M(v_f - v_i) \implies -1.62 = 0.520(v_f - 1.15) \implies v_f - 1.15 = -3.115 \implies v_f = -1.97\text{ m/s}

    Correct

    −0.810=0.520(vf−1.15)  ⟹  vf=1.15−1.558=−0.408 m/s-0.810 = 0.520(v_f - 1.15) \implies v_f = 1.15 - 1.558 = -0.408\text{ m/s}

    Your application of the impulse-momentum theorem and your algebraic steps are completely correct, but the final velocity is shifted because of the doubled impulse value from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the time duration from milliseconds to seconds.

You recognized that the bumper exerts force opposite to the cart's initial velocity, correctly assigning a negative sign to the impulse.

You correctly stated and solved the impulse-momentum theorem J=M(vf−vi)J = M(v_f - v_i).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Geometric area miscalculation of impulse

You calculated impulse as Fmax⋅ΔtF_{\text{max}} \cdot \Delta t instead of finding the area of a triangle, 12Fmax⋅Δt\frac{1}{2} F_{\text{max}} \cdot \Delta t.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing peak force with constant average force. When a force profile is variable or triangular, the total impulse corresponds to the geometric area under the force-time curve rather than the product of peak force and elapsed time.

REASONING PATH
Your ACEpath teacher’s suggested approach
Area Under Force-Time Curve
  • J=∫F(t) dt=Area under F(t)J = \int F(t)\,dt = \text{Area under } F(t)

  • Always identify the geometric shape of the force pulse (triangle, rectangle, trapezoid, half-sine) before computing impulse.

Triangular Force Pulse
  • Area=12⋅base⋅height\text{Area} = \frac{1}{2} \cdot \text{base} \cdot \text{height}

  • Include the factor of 12\frac{1}{2} whenever the force rises from zero to a peak and returns to zero linearly.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the correct triangular area: J=−12FmaxΔt=−12(45.0 N)(0.0360 s)=−0.810 N⋅sJ = -\frac{1}{2} F_{\text{max}} \Delta t = -\frac{1}{2}(45.0\text{ N})(0.0360\text{ s}) = -0.810\text{ N}\cdot\text{s}.

  2. Substitute J=−0.810 N⋅sJ = -0.810\text{ N}\cdot\text{s} into the impulse-momentum relation: −0.810=0.520(vf−1.15)-0.810 = 0.520(v_f - 1.15).

  3. Solve for vfv_f: vf−1.15=−0.8100.520≈−1.558  ⟹  vf=1.15−1.558=−0.408 m/sv_f - 1.15 = \frac{-0.810}{0.520} \approx -1.558 \implies v_f = 1.15 - 1.558 = -0.408\text{ m/s}.

Final answer

J=−0.810 N⋅sJ = -0.810\text{ N}\cdot\text{s}, vf=−0.408 m/sv_f = -0.408\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch the F(t)F(t) graph whenever a problem describes a force pulse to clearly visualize the required geometric area.

  • Practice calculating impulse for non-constant force shapes, such as triangular and trapezoidal pulses.

OverviewACEpath Teacher's Diagnosis

03 The student fails to convert the collision duration from milliseconds to seconds, resulting in an impulse that is three orders of magnitude too large.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    J=−(12)∗Fmax∗Δt  ⟹  J=−(12)∗45.0∗36.0=−810 N⋅sJ = -(\frac{1}{2}) * F_{\text{max}} * \Delta t \implies J = -(\frac{1}{2}) * 45.0 * 36.0 = -810\text{ N}\cdot\text{s}

    Correct

    J=−12FmaxΔt=−12(45.0 N)(0.0360 s)=−0.810 N⋅sJ = -\frac{1}{2} F_{\text{max}} \Delta t = -\frac{1}{2}(45.0\text{ N})(0.0360\text{ s}) = -0.810\text{ N}\cdot\text{s}

    You recognized that the impulse is the area under the triangular force curve and correctly assigned a negative sign for the opposing force. However, you substituted Δt=36.0\Delta t = 36.0 directly without converting milliseconds to seconds (36.0 ms=0.0360 s36.0\text{ ms} = 0.0360\text{ s}). As a result, your calculated impulse is off by a factor of 10310^3.

  2. Step 2

    J=M∗(vf−vi)  ⟹  −810=0.520∗(vf−1.15)  ⟹  vf−1.15=−1557.7  ⟹  vf=−1556.6 m/sJ = M * (v_f - v_i) \implies -810 = 0.520 * (v_f - 1.15) \implies v_f - 1.15 = -1557.7 \implies v_f = -1556.6\text{ m/s}

    Correct

    vf=vi+JM=1.15 m/s+−0.810 N⋅s0.520 kg≈−0.408 m/sv_f = v_i + \frac{J}{M} = 1.15\text{ m/s} + \frac{-0.810\text{ N}\cdot\text{s}}{0.520\text{ kg}} \approx -0.408\text{ m/s}

    Your algebraic formulation and application of the impulse-momentum theorem J=M(vf−vi)J = M(v_f - v_i) are completely correct. The resulting velocity is incorrect solely because it propagated the unconverted impulse value of −810 N⋅s-810\text{ N}\cdot\text{s} from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the magnitude of impulse equals the area under the triangular force-time pulse.

You correctly assigned a negative sign to the impulse to represent the opposing compressive force from the bumper.

You correctly set up and solved the impulse-momentum theorem to isolate the final velocity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Error

You substituted the contact duration as 36.036.0 instead of converting milliseconds to seconds (0.0360 s0.0360\text{ s}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the metric prefix 'milli-' in the contact time Δt=36.0 ms\Delta t = 36.0\text{ ms} before multiplying by force in newtons, resulting in an impulse and subsequent velocity that are three orders of magnitude too large.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check SI Base Units Before Calculating
  • Impulse has SI units of N⋅s=kg⋅m/s\text{N}\cdot\text{s} = \text{kg}\cdot\text{m/s}. A millisecond is 10−3 s10^{-3}\text{ s}.

  • Always convert time durations given in milliseconds (ms\text{ms}) to seconds (s\text{s}) by dividing by 10001000 before multiplying by newtons.

Physical Reality Check
  • A dynamics cart rolling at 1.15 m/s1.15\text{ m/s} colliding with a stationary bumper cannot physically rebound at hypersonic speed (1556.6 m/s1556.6\text{ m/s}).

  • Perform a quick sanity check on your final numerical values: if a laboratory cart rebounds faster than a supersonic jet, verify that your time unit is in seconds rather than milliseconds.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the pulse duration to seconds: Δt=36.0 ms=0.0360 s\Delta t = 36.0\text{ ms} = 0.0360\text{ s}.

  2. Compute the correct impulse: J=−12(45.0 N)(0.0360 s)=−0.810 N⋅sJ = -\frac{1}{2}(45.0\text{ N})(0.0360\text{ s}) = -0.810\text{ N}\cdot\text{s}.

  3. Substitute the corrected impulse into the momentum relation: −0.810 N⋅s=0.520 kg⋅(vf−1.15 m/s)-0.810\text{ N}\cdot\text{s} = 0.520\text{ kg} \cdot (v_f - 1.15\text{ m/s}).

  4. Solve for the final velocity: vf−1.15 m/s=−1.5577 m/s  ⟹  vf≈−0.408 m/sv_f - 1.15\text{ m/s} = -1.5577\text{ m/s} \implies v_f \approx -0.408\text{ m/s}.

Final answer

J=−0.810 N⋅sJ = -0.810\text{ N}\cdot\text{s}, vf=−0.408 m/sv_f = -0.408\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that all given quantities are converted into SI base units (seconds, meters, kilograms) before substituting into formulas.

  • Perform a magnitude sanity check on lab-scale kinematics to spot unit-conversion slips immediately.

Lock it in

Similar question

01

A 0.400 kg0.400\text{ kg} soccer ball travels horizontally at +12.0 m/s+12.0\text{ m/s} toward a player who kicks it directly backward. The kick delivers an average force of magnitude 320 N320\text{ N} over a contact time of 25.0 ms25.0\text{ ms}. Taking the initial direction as positive, find the impulse JJ delivered to the ball and its exit velocity vfv_f.

Answer

J=−8.00 N⋅sJ = -8.00\text{ N}\cdot\text{s}, vf=−8.00 m/sv_f = -8.00\text{ m/s}. Key steps: Because the kick reverses the ball, the force points in the negative direction: J=−FavgΔt=−(320)(0.0250)=−8.00 N⋅sJ = -F_{\text{avg}} \Delta t = -(320)(0.0250) = -8.00\text{ N}\cdot\text{s}. Then vf=vi+Jm=12.0+−8.000.400=12.0−20.0=−8.00 m/sv_f = v_i + \frac{J}{m} = 12.0 + \frac{-8.00}{0.400} = 12.0 - 20.0 = -8.00\text{ m/s}.

02

A 0.145 kg0.145\text{ kg} baseball moving horizontally at +38.0 m/s+38.0\text{ m/s} strikes a catcher's mitt. The mitt exerts a stopping force that increases linearly from 00 to FmaxF_{\text{max}} over 18.0 ms18.0\text{ ms} and brings the ball to a complete stop (vf=0v_f = 0). Find the required impulse JJ on the baseball and the peak force FmaxF_{\text{max}} exerted by the mitt.

Answer

J=−5.51 N⋅sJ = -5.51\text{ N}\cdot\text{s}, Fmax=612 NF_{\text{max}} = 612\text{ N}. Key steps: J=Δp=m(vf−vi)=0.145(0−38.0)=−5.51 N⋅sJ = \Delta p = m(v_f - v_i) = 0.145(0 - 38.0) = -5.51\text{ N}\cdot\text{s}. The force pulse is a right triangle with area ∣J∣=12FmaxΔt|J| = \frac{1}{2} F_{\text{max}} \Delta t, so Fmax=2∣J∣Δt=2(5.51)0.0180≈612 NF_{\text{max}} = \frac{2|J|}{\Delta t} = \frac{2(5.51)}{0.0180} \approx 612\text{ N}.

03

A 2.00 kg2.00\text{ kg} block slides on a frictionless horizontal floor at +4.00 m/s+4.00\text{ m/s} and strikes an elastic bumper. The bumper exerts a half-sine force pulse F(t)=−F0sin⁡(πtT)F(t) = -F_0 \sin\left(\frac{\pi t}{T}\right) directed in the negative direction, with duration T=0.100 sT = 0.100\text{ s}. If the block rebounds with an exit velocity of −3.20 m/s-3.20\text{ m/s}, calculate the total impulse JJ and the peak force F0F_0.

Answer

J=−14.4 N⋅sJ = -14.4\text{ N}\cdot\text{s}, F0=226 NF_0 = 226\text{ N}. Key steps: J=m(vf−vi)=2.00(−3.20−4.00)=−14.4 N⋅sJ = m(v_f - v_i) = 2.00(-3.20 - 4.00) = -14.4\text{ N}\cdot\text{s}. Integrating the force gives J=−∫0TF0sin⁡(πtT)dt=−2F0TπJ = -\int_0^T F_0 \sin\left(\frac{\pi t}{T}\right) dt = -\frac{2 F_0 T}{\pi}. Setting −2F0(0.100)π=−14.4-\frac{2 F_0 (0.100)}{\pi} = -14.4 gives F0=14.4π0.200≈226 NF_0 = \frac{14.4 \pi}{0.200} \approx 226\text{ N}.

Loading workspace…