Resources

To determine the rolling resistance coefficient CrrC_{rr} and aerodynamic drag area CdAC_d A of a scale-model electric cart (m=4.00 kgm = 4.00\text{ kg}), a team records the deceleration a=−dvdta = -\frac{dv}{dt} across several instantaneous velocities vv on a level track. The net resistive force couples constant mechanical rolling resistance with quadratic aerodynamic drag: madecel=Crrmg+12ρ(CdA)v2m a_{\text{decel}} = C_{rr} m g + \frac{1}{2} \rho (C_d A) v^2, where ρ=1.20 kg/m3\rho = 1.20\text{ kg/m}^3 and g=9.80 m/s2g = 9.80\text{ m/s}^2. The team performs a linear regression of total resistive force Fnet=madecelF_{\text{net}} = m a_{\text{decel}} versus v2v^2, obtaining the best-fit equation Fnet=0.392+0.0540v2F_{\text{net}} = 0.392 + 0.0540 v^2, with FnetF_{\text{net}} in newtons and vv in m/s\text{m/s}. Using this coupled physical model, determine (a) the dimensionless rolling resistance coefficient CrrC_{rr} and (b) the effective drag area CdAC_d A in m2\text{m}^2.

Answer and steps

Final answer

(a) Crr=0.0100C_{rr} = 0.0100; (b) CdA=0.0900 m2C_d A = 0.0900\text{ m}^2

Steps

01

Map the Physical Model to a Linear Form

The total deceleration force acting on the cart is given by the sum of rolling resistance and aerodynamic drag: Fnet=Crrmg+12ρ(CdA)v2F_{\text{net}} = C_{rr} m g + \frac{1}{2} \rho (C_d A) v^2

Treating v2v^2 as the independent variable (xx) and FnetF_{\text{net}} as the dependent variable (yy), this equation represents a straight line of the standard form y=c+kxy = c + kx:

  • Vertical intercept: c=Crrmgc = C_{rr} m g
  • Slope: k=12ρ(CdA)k = \frac{1}{2} \rho (C_d A)

The experimental regression line is: Fnet=0.392+0.0540v2F_{\text{net}} = 0.392 + 0.0540 v^2

By equating matching coefficients: c=0.392 Nc = 0.392\text{ N} k=0.0540 N⋅s2/m2k = 0.0540\text{ N}\cdot\text{s}^2/\text{m}^2


02

Determine the Rolling Resistance Coefficient (CrrC_{rr})

Equating the constant vertical intercept to the rolling resistance force: Crrmg=0.392 NC_{rr} m g = 0.392\text{ N}

Substitute m=4.00 kgm = 4.00\text{ kg} and g=9.80 m/s2g = 9.80\text{ m/s}^2: Crr(4.00 kg)(9.80 m/s2)=0.392 NC_{rr} (4.00\text{ kg})(9.80\text{ m/s}^2) = 0.392\text{ N} Crr(39.2 N)=0.392 NC_{rr} (39.2\text{ N}) = 0.392\text{ N} Crr=0.39239.2=0.0100C_{rr} = \frac{0.392}{39.2} = 0.0100

(Note: The rolling resistance coefficient is dimensionless).


03

Determine the Aerodynamic Drag Area (CdAC_d A)

Equating the slope of the line to the aerodynamic drag term: 12ρ(CdA)=0.0540 N⋅s2/m2\frac{1}{2} \rho (C_d A) = 0.0540\text{ N}\cdot\text{s}^2/\text{m}^2

Substitute ρ=1.20 kg/m3\rho = 1.20\text{ kg/m}^3: 12(1.20 kg/m3)(CdA)=0.0540 N⋅s2/m2\frac{1}{2} (1.20\text{ kg/m}^3) (C_d A) = 0.0540\text{ N}\cdot\text{s}^2/\text{m}^2 0.600⋅(CdA)=0.05400.600 \cdot (C_d A) = 0.0540 CdA=0.05400.600=0.0900 m2C_d A = \frac{0.0540}{0.600} = 0.0900\text{ m}^2

Common Pitfall: Be careful not to plot FnetF_{\text{net}} directly against vv expecting a straight line. Because aerodynamic drag depends quadratically on velocity (v2v^2), linearizing the data requires using v2v^2 as the horizontal axis.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets the factor of 1/2 in the aerodynamic drag formula when equating the slope to the drag coefficient term, resulting in half the correct drag area.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Frr=Crrmg=0.392  ⟹  Crr=0.392/(4.00×9.80)=0.0100F_{rr} = C_{rr} m g = 0.392 \implies C_{rr} = 0.392 / (4.00 \times 9.80) = 0.0100

  2. Step 2

    ρ(CdA)=0.0540\rho (C_d A) = 0.0540

    Correct

    12ρ(CdA)=0.0540\frac{1}{2} \rho (C_d A) = 0.0540

    The aerodynamic drag term in the physical model is 12ρ(CdA)v2\frac{1}{2} \rho (C_d A) v^2, so the slope of the FnetF_{\text{net}} versus v2v^2 graph equals 12ρ(CdA)\frac{1}{2} \rho (C_d A), not ρ(CdA)\rho (C_d A).

  3. Step 3

    CdA=0.0540/1.20=0.0450 m2C_d A = 0.0540 / 1.20 = 0.0450\text{ m}^2

    Correct

    CdA=0.054012(1.20)=0.0900 m2C_d A = \frac{0.0540}{\frac{1}{2}(1.20)} = 0.0900\text{ m}^2

    Your division by ρ\rho was carried out accurately, but the numerical result was halved because the factor of 12\frac{1}{2} was missing from your slope equation.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the vertical intercept corresponds to the mechanical rolling resistance force CrrmgC_{rr} m g.

You substituted the mass and gravitational acceleration with correct arithmetic to obtain Crr=0.0100C_{rr} = 0.0100.

You correctly identified the slope of the linear fit as the coefficient linked to the aerodynamic drag term.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted factor of 1/2 in aerodynamic drag expression

You dropped the coefficient 12\frac{1}{2} when equating the experimental regression slope to the drag parameters.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Incomplete coefficient mapping between the theoretical model Fdrag=12ρ(CdA)v2F_{\text{drag}} = \frac{1}{2}\rho (C_d A)v^2 and the empirical slope k=0.0540k = 0.0540, where the prefactor 12\frac{1}{2} was overlooked.

REASONING PATH
Your ACEpath teacher’s suggested approach
Full Term Inspection
  • Aerodynamic drag force is FD=12ρCdAv2F_D = \frac{1}{2} \rho C_d A v^2.

  • Always write out the complete theoretical coefficient multiplying the plotted variable v2v^2 before matching it to the numerical slope.

Slope Equivalence Check
  • For a fit y=c+kxy = c + kx with x=v2x = v^2, k=12ρ(CdA)k = \frac{1}{2}\rho (C_d A).

  • Isolate the unknown parameter algebraically: CdA=2kρC_d A = \frac{2k}{\rho}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute ρ=1.20 kg/m3\rho = 1.20\text{ kg/m}^3: 12(1.20 kg/m3)(CdA)=0.0540\frac{1}{2}(1.20\text{ kg/m}^3)(C_d A) = 0.0540

  2. Simplify the coefficient: 0.600(CdA)=0.05400.600(C_d A) = 0.0540

  3. Solve for the drag area: CdA=0.05400.600=0.0900 m2C_d A = \frac{0.0540}{0.600} = 0.0900\text{ m}^2

Final answer

(a) Crr=0.0100C_{rr} = 0.0100; (b) CdA=0.0900 m2C_d A = 0.0900\text{ m}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the standard aerodynamic drag formula FD=12ρACdv2F_D = \frac{1}{2}\rho A C_d v^2 and highlight the factor of 12\frac{1}{2}.

  • Practice mapping theoretical expressions term-by-term onto linear forms y=mx+by = mx + b before substituting numbers.

  • Solve the targeted practice problems below to reinforce linear regression matching with aerodynamic drag.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to divide the rolling resistance force intercept by the cart's mass, treating the intercept as a deceleration rather than a total force.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Crrg=0.392  ⟹  Crr=0.3929.80=0.0400C_{rr} g = 0.392 \implies C_{rr} = \frac{0.392}{9.80} = 0.0400

    Correct

    Crrmg=0.392  ⟹  Crr=0.392(4.00)(9.80)=0.0100C_{rr} m g = 0.392 \implies C_{rr} = \frac{0.392}{(4.00)(9.80)} = 0.0100

    You equated the intercept to CrrgC_{rr} g instead of the total normal rolling resistance force CrrmgC_{rr} m g. Because the regression models total force FnetF_{\text{net}} rather than acceleration, you need to include the cart's mass m=4.00 kgm = 4.00\text{ kg} in the constant term.

  2. Step 2

    (12)\left(\frac{1}{2}\right) ρ\rho (C_d A) = 0.0540   ⟹  \implies C_d A = 2×0.05401.20\frac{2 \times 0.0540}{1.20} = 0.0900 m\text{ m}^2

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the physical model as a linear relationship y=c+kxy = c + kx where x=v2x = v^2.

You correctly isolated and evaluated the aerodynamic drag area CdAC_d A from the slope with proper units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing mass factor in force intercept

You equated the vertical intercept 0.392 N0.392\text{ N} to acceleration per unit gg (CrrgC_{rr} g) rather than the full force (CrrmgC_{rr} m g).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the regression dependent variable Fnet=madecelF_{\text{net}} = m a_{\text{decel}} (a force in newtons) with acceleration adecela_{\text{decel}} (in m/s2\text{m/s}^2), causing the mass factor mm to be dropped from the rolling resistance force term.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Dependent Variable Units
  • If the vertical axis represents total force FF, every term on the right-hand side must have dimensions of force: [F0]=[mg]=N[F_0] = [m g] = \text{N}.

  • Verify dimensional consistency by checking whether the intercept carries units of force (requiring mm) or acceleration.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Crrmg=0.392 NC_{rr} m g = 0.392\text{ N}

  2. Crr=0.392 N(4.00 kg)(9.80 m/s2)=0.39239.2=0.0100C_{rr} = \frac{0.392\text{ N}}{(4.00\text{ kg})(9.80\text{ m/s}^2)} = \frac{0.392}{39.2} = 0.0100

Final answer

(a) Crr=0.0100C_{rr} = 0.0100; (b) CdA=0.0900 m2C_d A = 0.0900\text{ m}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Before equating regression parameters, write the full algebraic model side-by-side with y=c+kxy = c + kx and align matching variables.

  • Perform a quick unit check on the constant intercept: CrrC_{rr} is dimensionless, so multiplying by gg yields m/s2\text{m/s}^2, not N\text{N}; you need the factor of mm to get newtons.

OverviewACEpath Teacher's Diagnosis

03 The student divides by 2 instead of multiplying by 2 when isolating C_d A from the slope equation, obtaining one-fourth of the correct drag area.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Crrmg=0.392  ⟹  Crr=0.392/(4.00×9.80)=0.0100C_{rr} m g = 0.392 \implies C_{rr} = 0.392 / (4.00 \times 9.80) = 0.0100

  2. Step 2

    (1/2)ρ(CdA)=0.0540(1/2) \rho (C_d A) = 0.0540

  3. Step 3

    CdA=0.0540/(2×1.20)=0.0225 m2C_d A = 0.0540 / (2 \times 1.20) = 0.0225\text{ m}^2

    Correct

    CdA=2×0.0540ρ=0.05400.5×1.20=0.0900 m2C_d A = \frac{2 \times 0.0540}{\rho} = \frac{0.0540}{0.5 \times 1.20} = 0.0900\text{ m}^2

    To isolate CdAC_d A from 12ρ(CdA)=0.0540\frac{1}{2} \rho (C_d A) = 0.0540, you must multiply both sides by 22 (or divide by 12ρ=0.600\frac{1}{2}\rho = 0.600). Dividing by (2×1.20)(2 \times 1.20) introduces an extra factor of 14\frac{1}{4}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related the intercept of the regression equation to the constant rolling resistance force.

You solved for the dimensionless rolling resistance coefficient Crr=0.0100C_{rr} = 0.0100 with proper precision.

You correctly set up the slope equation matching the aerodynamic drag coefficient.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reciprocal Factor Inversion in Coefficient Isolation

You wrote 22 in the denominator alongside ρ\rho instead of moving it to the numerator when dividing by 12\frac{1}{2}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing division by a fraction 12\frac{1}{2} with multiplying the denominator by 22. Since dividing by 12\frac{1}{2} is equivalent to multiplying by 22, isolating XX from 12ρX=k\frac{1}{2}\rho X = k yields X=2kρX = \frac{2k}{\rho}, not k2ρ\frac{k}{2\rho}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Fractional Coefficient Inversion
  • Dividing an equation by 12\frac{1}{2} is mathematically equivalent to multiplying by 22: k12=2k\frac{k}{\frac{1}{2}} = 2k.

  • Always evaluate numerical factors in the coefficient first (e.g., 12(1.20)=0.600\frac{1}{2}(1.20) = 0.600) or multiply both sides by 22 before dividing by ρ\rho.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start from the slope relation: 12ρ(CdA)=0.0540 N⋅s2/m2\frac{1}{2} \rho (C_d A) = 0.0540\text{ N}\cdot\text{s}^2/\text{m}^2.

  2. Multiply both sides by 22: ρ(CdA)=2×0.0540=0.1080 N⋅s2/m2\rho (C_d A) = 2 \times 0.0540 = 0.1080\text{ N}\cdot\text{s}^2/\text{m}^2.

  3. Divide by ρ=1.20 kg/m3\rho = 1.20\text{ kg/m}^3: CdA=0.10801.20=0.0900 m2C_d A = \frac{0.1080}{1.20} = 0.0900\text{ m}^2.

Final answer

(a) Crr=0.0100C_{rr} = 0.0100; (b) CdA=0.0900 m2C_d A = 0.0900\text{ m}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Simplify the numerical product 12ρ=0.5×1.20=0.600\frac{1}{2}\rho = 0.5 \times 1.20 = 0.600 before dividing.

  • Practice isolating variables from expressions involving leading fractions such as 12mv2\frac{1}{2}mv^2 or 12kx2\frac{1}{2}kx^2.

Lock it in

Similar question

01

A cyclist coasts on a flat track. The total resistive force is modeled as F=F0+12ρ(CdA)v2F = F_0 + \frac{1}{2} \rho (C_d A) v^2. A plot of FF versus v2v^2 yields a line with vertical intercept 4.50 N4.50\text{ N} and slope 0.216 N⋅s2/m20.216\text{ N}\cdot\text{s}^2/\text{m}^2. Given air density ρ=1.20 kg/m3\rho = 1.20\text{ kg/m}^3, calculate the effective drag area CdAC_d A.

Answer

CdA=0.360 m2C_d A = 0.360\text{ m}^2. Equating the slope to the drag term gives 12ρ(CdA)=0.216\frac{1}{2} \rho (C_d A) = 0.216, so CdA=2×0.2161.20=0.360 m2C_d A = \frac{2 \times 0.216}{1.20} = 0.360\text{ m}^2.

02

A 2.00 kg2.00\text{ kg} autonomous ground drone slows down on a horizontal floor. Its measured deceleration follows a=0.150+0.0300v2a = 0.150 + 0.0300 v^2 (with aa in m/s2\text{m/s}^2 and vv in m/s\text{m/s}). The theoretical model is ma=Crrmg+12ρ(CdA)v2m a = C_{rr} m g + \frac{1}{2} \rho (C_d A) v^2, with g=9.80 m/s2g = 9.80\text{ m/s}^2 and ρ=1.20 kg/m3\rho = 1.20\text{ kg/m}^3. Determine both CrrC_{rr} and CdAC_d A.

Answer

Crr≈0.0153C_{rr} \approx 0.0153 and CdA=0.100 m2C_d A = 0.100\text{ m}^2. Multiplying the acceleration equation by m=2.00 kgm = 2.00\text{ kg} gives Fnet=0.300+0.0600v2F_{\text{net}} = 0.300 + 0.0600 v^2. Thus, Crrmg=0.300  ⟹  Crr=0.300(2.00)(9.80)≈0.0153C_{rr} m g = 0.300 \implies C_{rr} = \frac{0.300}{(2.00)(9.80)} \approx 0.0153. Matching the slope: 12ρ(CdA)=0.0600  ⟹  CdA=2×0.06001.20=0.100 m2\frac{1}{2} \rho (C_d A) = 0.0600 \implies C_d A = \frac{2 \times 0.0600}{1.20} = 0.100\text{ m}^2.

03

Two scale car models, Model X and Model Y, undergo coast-down testing in the same wind tunnel (ρ=1.20 kg/m3\rho = 1.20\text{ kg/m}^3). Their linear regressions of FdragF_{\text{drag}} versus v2v^2 yield slopes of kX=0.0480 N⋅s2/m2k_X = 0.0480\text{ N}\cdot\text{s}^2/\text{m}^2 and kY=0.0720 N⋅s2/m2k_Y = 0.0720\text{ N}\cdot\text{s}^2/\text{m}^2. If both cars have the same frontal area A=0.100 m2A = 0.100\text{ m}^2, find the difference between their drag coefficients, Cd,Y−Cd,XC_{d,Y} - C_{d,X}.

Answer

Cd,Y−Cd,X=0.400C_{d,Y} - C_{d,X} = 0.400. For each car, k=12ρACd=12(1.20)(0.100)Cd=0.0600Cdk = \frac{1}{2} \rho A C_d = \frac{1}{2}(1.20)(0.100) C_d = 0.0600 C_d. Therefore, Cd,X=0.04800.0600=0.800C_{d,X} = \frac{0.0480}{0.0600} = 0.800 and Cd,Y=0.07200.0600=1.200C_{d,Y} = \frac{0.0720}{0.0600} = 1.200. The difference is 1.200−0.800=0.4001.200 - 0.800 = 0.400.

Loading workspace…