Resources

In a two-dimensional Cartesian plane, a uniform electric field is oriented in the positive xx-direction with magnitude E=250 V/mE = 250\text{ V/m}. A set of equipotential lines is drawn with a constant potential difference of ΔV=10.0 V\Delta V = 10.0\text{ V} between adjacent lines. (a) Describe the orientation and geometric shape of these equipotential lines. (b) Calculate the perpendicular spacing dd between adjacent equipotential lines in centimeters. (c) If the equipotential line passing through the origin x=0.00 mx = 0.00\text{ m} is designated as V0=50.0 VV_0 = 50.0\text{ V}, determine the electric potential VV at the point (x,y)=(0.160 m,0.250 m)(x, y) = (0.160\text{ m}, 0.250\text{ m}).

Answer and steps

Final answer

(a) Vertical lines parallel to the yy-axis (equations of the form x=constantx = \text{constant}); (b) d=4.00 cmd = 4.00\text{ cm}; (c) V=10.0 VV = 10.0\text{ V}

Steps

Part (a): Orientation and Shape of the Equipotential Lines

Equipotential lines are always everywhere perpendicular to electric field lines.

Because the electric field is uniform and points purely in the positive xx-direction:

  • The electric field lines are straight, horizontal lines directed to the right.
  • The lines perpendicular to them are straight vertical lines parallel to the yy-axis.

Therefore, the equipotential lines are vertical straight lines described mathematically by equations of the form x=constantx = \text{constant}.


Part (b): Spacing Between Adjacent Equipotential Lines

For a uniform electric field, the magnitude of the potential difference ∣ΔV∣|\Delta V| over a displacement dd along the direction of the field (perpendicular to the equipotential lines) is given by:

∣ΔV∣=E⋅d|\Delta V| = E \cdot d

Rearranging for the spacing dd:

d=∣ΔV∣Ed = \frac{|\Delta V|}{E}

Substitute the given values:

d=10.0 V250 V/m=0.0400 md = \frac{10.0\text{ V}}{250\text{ V/m}} = 0.0400\text{ m}

Converting meters to centimeters:

d=0.0400 m×100 cm/m=4.00 cmd = 0.0400\text{ m} \times 100\text{ cm/m} = 4.00\text{ cm}


Part (c): Electric Potential at (0.160 m,0.250 m)(0.160\text{ m}, 0.250\text{ m})

Electric potential decreases as one moves in the direction of the electric field lines. For a uniform field oriented in the positive xx-direction, the potential depends only on the xx-coordinate:

V(x,y)=V0−E⋅xV(x, y) = V_0 - E \cdot x

Notice that the yy-coordinate has no effect on the electric potential because motion perpendicular to the electric field lies along an equipotential path.

Substitute V0=50.0 VV_0 = 50.0\text{ V}, E=250 V/mE = 250\text{ V/m}, and x=0.160 mx = 0.160\text{ m}:

V=50.0 V−(250 V/m)(0.160 m)V = 50.0\text{ V} - (250\text{ V/m})(0.160\text{ m})

V=50.0 V−40.0 V=10.0 VV = 50.0\text{ V} - 40.0\text{ V} = 10.0\text{ V}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student believes that electric potential increases in the direction of the electric field rather than decreasing.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Equipotential lines are perpendicular to the electric field   ⟹  \implies The lines are straight vertical lines parallel to the yy-axis.

  2. Step 2

    E=ΔVd  ⟹  d=ΔVE=10.0250=0.040 m  ⟹  d=4.00 cmE = \frac{\Delta V}{d} \implies d = \frac{\Delta V}{E} = \frac{10.0}{250} = 0.040\text{ m} \implies d = 4.00\text{ cm}

  3. Step 3

    V(x)=V0+E⋅x  ⟹  V=50.0+(250)(0.160)=50.0+40.0=90.0 VV(x) = V_0 + E\cdot x \implies V = 50.0 + (250)(0.160) = 50.0 + 40.0 = 90.0\text{ V}

    Correct

    V(x)=V0−E⋅x=50.0 V−(250 V/m)(0.160 m)=10.0 VV(x) = V_0 - E\cdot x = 50.0\text{ V} - (250\text{ V/m})(0.160\text{ m}) = 10.0\text{ V}

    Electric field lines always point in the direction of decreasing electric potential (Ex=−dVdxE_x = -\frac{dV}{dx}). Because the point lies at +0.160 m+0.160\text{ m} along the direction of E⃗\vec{E}, the potential must drop below V0V_0, meaning you should subtract E⋅xE\cdot x rather than add it.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly reasoned that equipotential lines are perpendicular to electric field lines.

You successfully deduced that horizontal field lines imply vertical equipotential lines parallel to the yy-axis.

You applied the uniform field relationship E=ΔVdE = \frac{\Delta V}{d} accurately and handled unit conversion to centimeters without error.

You correctly identified that the yy-coordinate does not affect the electric potential in a field oriented purely along the xx-axis.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error in Potential Difference

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that electric potential increases along the direction of the electric field vector, forgetting the negative sign in the relationship ΔV=−E⃗⋅Δr⃗\Delta V = -\vec{E} \cdot \Delta\vec{r} (electric field lines always point 'downhill' toward lower electric potential).

REASONING PATH
Your ACEpath teacher’s suggested approach
Direction of Decreasing Potential
  • Electric field lines point in the direction of steepest decrease in electric potential: E⃗=−∇V\vec{E} = -\nabla V, so along the field direction ΔV=−E Δx\Delta V = -E\,\Delta x.

  • Whenever you move parallel to an electric field line, verify that your calculated potential decreases.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. V=50.0 V−(250 V/m)(0.160 m)V = 50.0\text{ V} - (250\text{ V/m})(0.160\text{ m})

  2. V=50.0 V−40.0 V=10.0 VV = 50.0\text{ V} - 40.0\text{ V} = 10.0\text{ V}

Final answer

V=10.0 VV = 10.0\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember the topographic analogy: electric field vectors point downhill, so moving with E⃗\vec{E} lowers potential, while moving against E⃗\vec{E} raises potential.

  • Always check your final potential against the sign of displacement along E⃗\vec{E}: if x>x0x > x_0 along a positive field, V(x)V(x) must be less than V(x0)V(x_0).

OverviewACEpath Teacher's Diagnosis

02 The student assumes equipotential lines are oriented parallel to the electric field lines rather than perpendicular to them.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Equipotential lines run parallel to the electric field. They are straight horizontal lines parallel to the xx-axis.

    Correct

    Equipotential lines are always perpendicular to the electric field lines. Since E⃗\vec{E} points along the positive xx-axis, the equipotential lines are straight vertical lines parallel to the yy-axis (x=constantx = \text{constant}).

    Equipotential lines are everywhere orthogonal (perpendicular) to electric field lines. Moving parallel to the electric field changes the electric potential at the maximum rate, whereas moving perpendicular to the electric field produces no change in potential.

  2. Step 2

    d=ΔVE=10.0250=0.040 m  ⟹  d=4.00 cmd = \frac{\Delta V}{E} = \frac{10.0}{250} = 0.040\text{ m} \implies d = 4.00\text{ cm}

  3. Step 3

    V=V0−E⋅x  ⟹  V=50.0−(250)(0.160)=50.0−40.0  ⟹  V=10.0 VV = V_0 - E \cdot x \implies V = 50.0 - (250)(0.160) = 50.0 - 40.0 \implies V = 10.0\text{ V}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the uniform electric field equation d=ΔVEd = \frac{\Delta V}{E} to determine the spacing between adjacent lines.

You converted units accurately from meters to centimeters.

You correctly recognized that the potential decreases in the direction of the electric field and depends solely on the xx-coordinate.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Perpendicularity of equipotential lines to electric field lines

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the geometric relationship between electric field lines and equipotential surfaces, assuming they run parallel instead of mutually perpendicular.

REASONING PATH
Your ACEpath teacher’s suggested approach
Equipotential and Field Line Orthogonality
  • Along an equipotential line, dV=−E⃗⋅dr⃗=0dV = -\vec{E} \cdot d\vec{r} = 0, which requires E⃗⊥dr⃗\vec{E} \perp d\vec{r}.

  • Always draw equipotential surfaces or lines at right angles (90∘90^\circ) to the local electric field vectors.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the direction of the electric field: E⃗\vec{E} points purely in the positive xx-direction (horizontal lines).

  2. Apply the orthogonality condition: equipotential lines must be perpendicular to E⃗\vec{E}.

  3. Determine the geometric lines perpendicular to horizontal lines: they are vertical straight lines parallel to the yy-axis, represented by x=constantx = \text{constant}.

Final answer

(a) Vertical straight lines parallel to the yy-axis (x=constantx = \text{constant}); (b) d=4.00 cmd = 4.00\text{ cm}; (c) V=10.0 VV = 10.0\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review why moving perpendicular to an electric field requires zero work (W=−qΔV=0W = -q\Delta V = 0).

  • Practice sketching electric field lines and equipotential lines for standard charge geometries (point charges, parallel plates, and electric dipoles).

OverviewACEpath Teacher's Diagnosis

03 The student improperly includes the y-coordinate by using the Euclidean distance from the origin instead of the displacement along the field direction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Equipotential lines are perpendicular to the field. They are vertical straight lines parallel to the yy-axis.

  2. Step 2

    d=ΔVE=10.0250=0.040 m⟹d=4.00 cmd = \frac{\Delta V}{E} = \frac{10.0}{250} = 0.040\text{ m} \Longrightarrow d = 4.00\text{ cm}

  3. Step 3

    r=x2+y2=0.1602+0.2502=0.0881≈0.297 mr = \sqrt{x^2 + y^2} = \sqrt{0.160^2 + 0.250^2} = \sqrt{0.0881} \approx 0.297\text{ m}

    Correct

    Δx=x−x0=0.160 m\Delta x = x - x_0 = 0.160\text{ m} (the yy-displacement does not change the electric potential because E⃗\vec{E} is purely in the xx-direction)

    You used the Pythagorean distance from the origin r=x2+y2r = \sqrt{x^2 + y^2}, but the change in potential depends solely on displacement parallel to the electric field: ΔV=−E⃗⋅Δr⃗=−E Δx\Delta V = -\vec{E} \cdot \Delta\vec{r} = -E\,\Delta x.

  4. Step 4

    V=V0−E⋅r=50.0−(250)(0.297)=50.0−74.25⟹V=−24.3 VV = V_0 - E \cdot r = 50.0 - (250)(0.297) = 50.0 - 74.25 \Longrightarrow V = -24.3\text{ V}

    Correct

    V=V0−E⋅x=50.0 V−(250 V/m)(0.160 m)=10.0 VV = V_0 - E \cdot x = 50.0\text{ V} - (250\text{ V/m})(0.160\text{ m}) = 10.0\text{ V}

    You evaluated the potential formula correctly according to your value of rr, but the result was affected by substituting the radial distance instead of the xx-coordinate.

WHAT YOU DID WELL
Compliments from Your Teacher

You stated the perpendicular geometric relationship between field lines and equipotentials clearly.

You correctly related potential difference, field strength, and spacing for a uniform field.

You correctly applied unit conversion from meters to centimeters.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Using Euclidean distance instead of parallel displacement

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the potential drop as a function of total Euclidean distance from the origin rather than the dot product −E⃗⋅Δr⃗-\vec{E} \cdot \Delta\vec{r}. Because E⃗\vec{E} points along the positive xx-axis, motion in the yy-direction is along an equipotential path and causes zero change in potential.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dot Product Definition of Potential Difference
  • In a uniform field, ΔV=−E⃗⋅Δr⃗=−(ExΔx+EyΔy)\Delta V = -\vec{E} \cdot \Delta\vec{r} = -(E_x \Delta x + E_y \Delta y).

  • Check whether the electric field has any component along the direction of displacement before including that coordinate.

Equipotential Motion
  • Any displacement perpendicular to E⃗\vec{E} has ΔV=0\Delta V = 0.

  • Ignore displacement components along equipotential directions when evaluating ΔV\Delta V.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that E⃗=(250 V/m) i^\vec{E} = (250\text{ V/m})\,\hat{i}, so Ex=250 V/mE_x = 250\text{ V/m} and Ey=0E_y = 0.

  2. Write the potential function: V(x,y)=V0−ExΔx=50.0 V−(250 V/m)(0.160 m)V(x, y) = V_0 - E_x \Delta x = 50.0\text{ V} - (250\text{ V/m})(0.160\text{ m}).

  3. Compute the potential drop: ΔV=−(250)(0.160)=−40.0 V\Delta V = -(250)(0.160) = -40.0\text{ V}.

  4. Add to V0V_0: V=50.0 V−40.0 V=10.0 VV = 50.0\text{ V} - 40.0\text{ V} = 10.0\text{ V}.

Final answer

V=10.0 VV = 10.0\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how the dot product E⃗⋅Δr⃗\vec{E} \cdot \Delta\vec{r} isolates only the parallel component of displacement.

  • Practice identifying coordinates that lie along equipotential lines and setting their contribution to potential change to zero.

Lock it in

Similar question

01

A uniform electric field of magnitude E=150 V/mE = 150\text{ V/m} points in the positive xx-direction. The electric potential at the origin (0,0)(0, 0) is 80.0 V80.0\text{ V}. Determine the electric potential at (x,y)=(0.300 m,−0.500 m)(x, y) = (0.300\text{ m}, -0.500\text{ m}).

Answer

V=35.0 VV = 35.0\text{ V}. Since the field is directed along +x+x, the potential is independent of yy: V(x)=V0−E⋅x=80.0 V−(150 V/m)(0.300 m)=80.0 V−45.0 V=35.0 VV(x) = V_0 - E\cdot x = 80.0\text{ V} - (150\text{ V/m})(0.300\text{ m}) = 80.0\text{ V} - 45.0\text{ V} = 35.0\text{ V}.

02

Two large, flat, parallel conducting plates are separated by 5.00 cm5.00\text{ cm}. The plate at x=0x = 0 is held at +120 V+120\text{ V}, and the plate at x=5.00 cmx = 5.00\text{ cm} is grounded (0 V0\text{ V}). (a) Find the magnitude and direction of the uniform electric field between the plates. (b) Find the potential at x=2.00 cmx = 2.00\text{ cm}.

Answer

(a) E=2400 V/mE = 2400\text{ V/m} directed in the positive xx-direction (from high to low potential). Key step: E=ΔVd=120 V0.0500 m=2400 V/mE = \frac{\Delta V}{d} = \frac{120\text{ V}}{0.0500\text{ m}} = 2400\text{ V/m}.\n(b) V=72.0 VV = 72.0\text{ V}. Key step: V(x)=V0−E⋅x=120 V−(2400 V/m)(0.0200 m)=72.0 VV(x) = V_0 - E\cdot x = 120\text{ V} - (2400\text{ V/m})(0.0200\text{ m}) = 72.0\text{ V}.

03

In a region of space, the uniform electric field is E⃗=(300i^−400j^) V/m\vec{E} = (300\hat{i} - 400\hat{j})\text{ V/m}. If the electric potential at the origin is V(0,0)=100 VV(0,0) = 100\text{ V}, find the electric potential at the point (0.200 m,0.100 m)(0.200\text{ m}, 0.100\text{ m}).

Answer

V=80.0 VV = 80.0\text{ V}. Key step: ΔV=−E⃗⋅Δr⃗=−[(300)(0.200)+(−400)(0.100)]=−[60.0−40.0]=−20.0 V\Delta V = -\vec{E}\cdot\Delta\vec{r} = -[(300)(0.200) + (-400)(0.100)] = -[60.0 - 40.0] = -20.0\text{ V}. Thus V=100 V−20.0 V=80.0 VV = 100\text{ V} - 20.0\text{ V} = 80.0\text{ V}.

Loading workspace…