Resources

A crate is pulled across a flat, frictionless horizontal warehouse floor by a rope exerting a tension force of F⃗=145 N\vec{F} = 145\text{ N}. The rope makes an angle of θ=35.0∘\theta = 35.0^\circ above the positive xx-axis (horizontal). Calculate the horizontal component FxF_x and the vertical component FyF_y of the tension force.

Answer and steps

Final answer

Fx=119 NF_x = 119\text{ N}, Fy=83.2 NF_y = 83.2\text{ N}

Steps

01

Identify the given values

To resolve a two-dimensional vector into perpendicular components, form a right triangle where the vector acts as the hypotenuse, the horizontal component forms the adjacent side, and the vertical component forms the opposite side.

  • Magnitude of the tension force: F=145 NF = 145\text{ N}
  • Direction angle relative to the horizontal (+x+x-axis): θ=35.0∘\theta = 35.0^\circ

02

Calculate the horizontal component (FxF_x)

The horizontal component lies along the adjacent side of the angle θ\theta: Fx=Fcos⁡θF_x = F \cos\theta

Substitute the known values: Fx=145 N⋅cos⁡(35.0∘)F_x = 145\text{ N} \cdot \cos(35.0^\circ) Fx≈145 N⋅0.81915≈118.78 NF_x \approx 145\text{ N} \cdot 0.81915 \approx 118.78\text{ N}

Rounding to three significant figures gives: Fx=119 NF_x = 119\text{ N}


03

Calculate the vertical component (FyF_y)

The vertical component lies along the opposite side of the angle θ\theta: Fy=Fsin⁡θF_y = F \sin\theta

Substitute the known values: Fy=145 N⋅sin⁡(35.0∘)F_y = 145\text{ N} \cdot \sin(35.0^\circ) Fy≈145 N⋅0.57358≈83.17 NF_y \approx 145\text{ N} \cdot 0.57358 \approx 83.17\text{ N}

Rounding to three significant figures gives: Fy=83.2 NF_y = 83.2\text{ N}


Common Pitfall

Ensure your calculator is set to degrees rather than radians before evaluating trigonometric functions. In addition, always verify that the angle is measured with respect to the horizontal; if an angle is given relative to the vertical, the roles of sine and cosine are reversed.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student swaps the sine and cosine trigonometric functions for the horizontal and vertical components, yielding Fx ≈ 83.2 N and Fy ≈ 119 N.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Fx=F∗sin⁡(θ)  ⟹  Fx=145∗sin⁡(35.0∘)  ⟹  Fx=145∗0.5736=83.2 NF_x = F * \sin(\theta) \implies F_x = 145 * \sin(35.0^\circ) \implies F_x = 145 * 0.5736 = 83.2\text{ N}

    Correct

    Fx=Fcos⁡(θ)=145 N⋅cos⁡(35.0∘)≈119 NF_x = F\cos(\theta) = 145\text{ N} \cdot \cos(35.0^\circ) \approx 119\text{ N}

    Because the angle θ=35.0∘\theta = 35.0^\circ is measured with respect to the horizontal positive xx-axis, the horizontal side is adjacent to θ\theta. By definition, cos⁡(θ)=adjacenthypotenuse\cos(\theta) = \frac{\text{adjacent}}{\text{hypotenuse}}, so Fx=Fcos⁡(θ)F_x = F\cos(\theta) rather than Fsin⁡(θ)F\sin(\theta).

  2. Step 2

    Fy=F∗cos⁡(θ)  ⟹  Fy=145∗cos⁡(35.0∘)  ⟹  Fy=145∗0.8192=119 NF_y = F * \cos(\theta) \implies F_y = 145 * \cos(35.0^\circ) \implies F_y = 145 * 0.8192 = 119\text{ N}

    Correct

    Fy=Fsin⁡(θ)=145 N⋅sin⁡(35.0∘)≈83.2 NF_y = F\sin(\theta) = 145\text{ N} \cdot \sin(35.0^\circ) \approx 83.2\text{ N}

    Because the vertical component lies opposite the angle θ=35.0∘\theta = 35.0^\circ, you need the sine function: sin⁡(θ)=oppositehypotenuse\sin(\theta) = \frac{\text{opposite}}{\text{hypotenuse}}, which yields Fy=Fsin⁡(θ)F_y = F\sin(\theta) instead of Fcos⁡(θ)F\cos(\theta).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the magnitude of the force (145 N145\text{ N}) and the direction angle (35.0∘35.0^\circ).

You correctly evaluated the trigonometric ratios with your calculator set to degree mode.

You maintained proper significant figures and units in your arithmetic.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Function Swap

You accidentally interchanged the sine and cosine functions when setting up the horizontal and vertical projections.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated the horizontal component with sine and the vertical component with cosine, rather than using right-triangle trigonometry (SOH CAH TOA) based on which component is adjacent or opposite to the reference angle.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Reference Axis
  • If an angle θ\theta is measured from the horizontal (xx-axis), the horizontal component is adjacent to θ\theta and the vertical component is opposite to θ\theta.

  • Sketch the right triangle and label the side next to θ\theta as adjacent (FxF_x) and the side facing across from θ\theta as opposite (FyF_y).

Apply SOH CAH TOA
  • cos⁡(θ)=adjacenthypotenuse\cos(\theta) = \frac{\text{adjacent}}{\text{hypotenuse}} and sin⁡(θ)=oppositehypotenuse\sin(\theta) = \frac{\text{opposite}}{\text{hypotenuse}}.

  • Assign cosine to the adjacent side (Fx=Fcos⁡θF_x = F\cos\theta) and sine to the opposite side (Fy=Fsin⁡θF_y = F\sin\theta) whenever the angle is measured from the horizontal.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the horizontal component using the adjacent trigonometric ratio: Fx=Fcos⁡(35.0∘)=145 N⋅0.81915≈119 NF_x = F\cos(35.0^\circ) = 145\text{ N} \cdot 0.81915 \approx 119\text{ N}.

  2. Set up the vertical component using the opposite trigonometric ratio: Fy=Fsin⁡(35.0∘)=145 N⋅0.57358≈83.2 NF_y = F\sin(35.0^\circ) = 145\text{ N} \cdot 0.57358 \approx 83.2\text{ N}.

Final answer

Fx=119 N,  Fy=83.2 NF_x = 119\text{ N},\; F_y = 83.2\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always sketch a quick right-triangle vector diagram before writing component formulas.

  • Confirm whether the given angle touches the horizontal or the vertical axis to decide whether to use cosine or sine for the horizontal component.

OverviewACEpath Teacher's Diagnosis

02 The student evaluates the trigonometric functions with a calculator set in radian mode instead of degree mode, yielding Fx ≈ -131 N and Fy ≈ -62.1 N.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Fx=145∗cos⁡(35)F_x = 145 * \cos(35)

  2. Step 2

    Fx=145∗(−0.9037)  ⟹  Fx=−131 NF_x = 145 * (-0.9037) \implies F_x = -131\text{ N}

    Correct

    Fx=145 N⋅0.8192≈119 NF_x = 145\text{ N} \cdot 0.8192 \approx 119\text{ N}

    Your calculator evaluated cos⁡(35)\cos(35) in radians instead of degrees, yielding −0.9037-0.9037 instead of +0.8192+0.8192.

  3. Step 3

    Fy=145∗sin⁡(35)F_y = 145 * \sin(35)

  4. Step 4

    Fy=145∗(−0.4282)  ⟹  Fy=−62.1 NF_y = 145 * (-0.4282) \implies F_y = -62.1\text{ N}

    Correct

    Fy=145 N⋅0.5736≈83.2 NF_y = 145\text{ N} \cdot 0.5736 \approx 83.2\text{ N}

    Your calculator evaluated sin⁡(35)\sin(35) in radians instead of degrees, yielding −0.4282-0.4282 instead of +0.5736+0.5736.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly chose cosine for the horizontal component and sine for the vertical component relative to the horizontal axis.

You correctly substituted the magnitude 145 N145\text{ N} into both expressions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Angle Mode Mismatch (Radians vs. Degrees)

Evaluating cos⁡(35)\cos(35) and sin⁡(35)\sin(35) in radian mode produced negative values for an acute angle in Quadrant I.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You did not verify that your calculator angle mode was set to degrees (DEG) before evaluating trigonometric functions for an angle given in degrees.

REASONING PATH
Your ACEpath teacher’s suggested approach
Quadrant Sign Check
  • An acute angle 0∘<θ<90∘0^\circ < \theta < 90^\circ above the positive xx-axis must have positive components: Fx>0F_x > 0 and Fy>0F_y > 0.

  • Whenever a vector pulls forward and upward into Quadrant I, verify immediately that both components are positive.

Calculator Mode Verification
  • Trigonometric functions require angles in degrees when the problem specifies degrees (∘^\circ).

  • Check your calculator screen for the DEG indicator before computing trigonometric values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Evaluate cos⁡(35.0∘)\cos(35.0^\circ) in degree mode: cos⁡(35.0∘)≈0.81915\cos(35.0^\circ) \approx 0.81915.

  2. Compute Fx=145 N⋅0.81915≈118.78 N≈119 NF_x = 145\text{ N} \cdot 0.81915 \approx 118.78\text{ N} \approx 119\text{ N}.

  3. Evaluate sin⁡(35.0∘)\sin(35.0^\circ) in degree mode: sin⁡(35.0∘)≈0.57358\sin(35.0^\circ) \approx 0.57358.

  4. Compute Fy=145 N⋅0.57358≈83.17 N≈83.2 NF_y = 145\text{ N} \cdot 0.57358 \approx 83.17\text{ N} \approx 83.2\text{ N}.

Final answer

Fx=119 NF_x = 119\text{ N}, Fy=83.2 NF_y = 83.2\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Switch your calculator mode from RAD to DEG.

  • Re-evaluate both expressions and verify that the resulting force components point in the positive directions.

OverviewACEpath Teacher's Diagnosis

03 The student confuses component resolution with right-triangle hypotenuse calculation and divides by the trigonometric ratios rather than multiplying, obtaining Fx ≈ 177 N and Fy ≈ 253 N.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Fx=Fcos⁡(35.0∘)  ⟹  Fx=1450.8192  ⟹  Fx=177 NF_x = \frac{F}{\cos(35.0^\circ)} \implies F_x = \frac{145}{0.8192} \implies F_x = 177\text{ N}

    Correct

    Fx=Fcos⁡(35.0∘)=145 N⋅cos⁡(35.0∘)≈119 NF_x = F \cos(35.0^\circ) = 145\text{ N} \cdot \cos(35.0^\circ) \approx 119\text{ N}

    In the right triangle formed by the vector, the total force FF is the hypotenuse and FxF_x is the adjacent side, so cos⁡(35.0∘)=FxF\cos(35.0^\circ) = \frac{F_x}{F}, which yields Fx=Fcos⁡(35.0∘)F_x = F \cos(35.0^\circ) rather than Fx=Fcos⁡(35.0∘)F_x = \frac{F}{\cos(35.0^\circ)}.

  2. Step 2

    Fy=Fsin⁡(35.0∘)  ⟹  Fy=1450.5736  ⟹  Fy=253 NF_y = \frac{F}{\sin(35.0^\circ)} \implies F_y = \frac{145}{0.5736} \implies F_y = 253\text{ N}

    Correct

    Fy=Fsin⁡(35.0∘)=145 N⋅sin⁡(35.0∘)≈83.2 NF_y = F \sin(35.0^\circ) = 145\text{ N} \cdot \sin(35.0^\circ) \approx 83.2\text{ N}

    The vertical component is the opposite side of the right triangle, so sin⁡(35.0∘)=FyF\sin(35.0^\circ) = \frac{F_y}{F}, giving Fy=Fsin⁡(35.0∘)F_y = F \sin(35.0^\circ) rather than dividing by the sine.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly paired the cosine function with the horizontal component and the sine function with the vertical component for an angle measured from the horizontal.

You accurately evaluated the trigonometric values cos⁡(35.0∘)≈0.8192\cos(35.0^\circ) \approx 0.8192 and sin⁡(35.0∘)≈0.5736\sin(35.0^\circ) \approx 0.5736.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dividing instead of multiplying when resolving components

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the definition of basic trigonometric ratios by treating the total vector magnitude as an adjacent or opposite side rather than the hypotenuse, resulting in dividing by the trigonometric ratios rather than multiplying.

REASONING PATH
Your ACEpath teacher’s suggested approach
Trigonometric ratio definitions
  • For an angle θ\theta adjacent to the xx-axis, cos⁡θ=adjacenthypotenuse=FxF\cos\theta = \frac{\text{adjacent}}{\text{hypotenuse}} = \frac{F_x}{F} and sin⁡θ=oppositehypotenuse=FyF\sin\theta = \frac{\text{opposite}}{\text{hypotenuse}} = \frac{F_y}{F}.

  • Always isolate the component by multiplying the total vector magnitude by the trigonometric ratio: Fx=Fcos⁡θF_x = F\cos\theta and Fy=Fsin⁡θF_y = F\sin\theta.

Component magnitude reality check
  • In a right triangle, each leg must be shorter than the hypotenuse (∣Fx∣≤F|F_x| \le F and ∣Fy∣≤F|F_y| \le F).

  • If a calculated component is larger than the original vector magnitude, check immediately whether you accidentally divided instead of multiplied.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the definition of cosine for the right triangle: cos⁡(35.0∘)=FxF\cos(35.0^\circ) = \frac{F_x}{F}.

  2. Multiply both sides by F=145 NF = 145\text{ N}: Fx=145 N⋅cos⁡(35.0∘)≈119 NF_x = 145\text{ N} \cdot \cos(35.0^\circ) \approx 119\text{ N}.

  3. Set up the definition of sine for the vertical leg: sin⁡(35.0∘)=FyF\sin(35.0^\circ) = \frac{F_y}{F}.

  4. Multiply both sides by F=145 NF = 145\text{ N}: Fy=145 N⋅sin⁡(35.0∘)≈83.2 NF_y = 145\text{ N} \cdot \sin(35.0^\circ) \approx 83.2\text{ N}.

Final answer

Fx=119 NF_x = 119\text{ N}, Fy=83.2 NF_y = 83.2\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch the right triangle with the given vector as the hypotenuse before writing algebraic equations.

  • Always perform a quick reasonableness check to verify that each perpendicular component is smaller than the hypotenuse.

Lock it in

Similar question

01

A lawnmower is pushed with a force of 80.0 N80.0\text{ N} directed at an angle of 40.0∘40.0^\circ below the horizontal. Find the horizontal component FxF_x and the vertical component FyF_y (taking downward as negative).

Answer

Fx=61.3 NF_x = 61.3\text{ N}, Fy=−51.4 NF_y = -51.4\text{ N}. Key steps: The angle is relative to the horizontal, so the adjacent horizontal component is Fx=80.0cos⁡(40.0∘)≈61.28 N≈61.3 NF_x = 80.0\cos(40.0^\circ) \approx 61.28\text{ N} \approx 61.3\text{ N}. The opposite vertical component points downward, so Fy=−80.0sin⁡(40.0∘)≈−51.42 N≈−51.4 NF_y = -80.0\sin(40.0^\circ) \approx -51.42\text{ N} \approx -51.4\text{ N}.

02

A pendulum bob hangs on a string pulled sideways so that the string makes an angle of 25.0∘25.0^\circ with the vertical. The tension in the string is 50.0 N50.0\text{ N}. Calculate the horizontal component TxT_x and the vertical component TyT_y of the tension.

Answer

Tx=21.1 NT_x = 21.1\text{ N}, Ty=45.3 NT_y = 45.3\text{ N}. Key steps: Because the angle θ=25.0∘\theta = 25.0^\circ is measured from the vertical axis, the vertical side is adjacent and the horizontal side is opposite. Thus, Ty=Tcos⁡(25.0∘)=50.0(0.9063)≈45.3 NT_y = T\cos(25.0^\circ) = 50.0(0.9063) \approx 45.3\text{ N}, and Tx=Tsin⁡(25.0∘)=50.0(0.4226)≈21.1 NT_x = T\sin(25.0^\circ) = 50.0(0.4226) \approx 21.1\text{ N}.

03

A sled is pulled across an icy hill inclined at 15.0∘15.0^\circ above the horizontal. A rope pulls parallel to the incline with a tension of 220 N220\text{ N}. Find the components of this tension along standard Cartesian axes (horizontal +x+x and vertical +y+y).

Answer

Tx=212 NT_x = 212\text{ N}, Ty=56.9 NT_y = 56.9\text{ N}. Key steps: The force vector points at an angle of 15.0∘15.0^\circ above the horizontal +x+x-axis. Resolving into standard horizontal and vertical axes: Tx=220cos⁡(15.0∘)≈220(0.9659)=212.5 N≈212 NT_x = 220\cos(15.0^\circ) \approx 220(0.9659) = 212.5\text{ N} \approx 212\text{ N}, and Ty=220sin⁡(15.0∘)≈220(0.2588)=56.94 N≈56.9 NT_y = 220\sin(15.0^\circ) \approx 220(0.2588) = 56.94\text{ N} \approx 56.9\text{ N}.

Loading workspace…