Resources
In an acoustic calibration laboratory, an engineering student standardizes a precision microphone using an acoustic calibrator cavity. The calibrator produces an sinusoidal pressure tone with a specified calibration level of (SPL re ). The microphone has a calibrated open-circuit sensitivity of . (a) Calculate the root-mean-square pressure and the peak pressure amplitude generated inside the calibration cavity. (b) Determine the expected peak AC voltage amplitude delivered by the microphone. (c) If the input to the loudspeaker driver inside the calibrator is adjusted so that the measured output voltage amplitude triples to , calculate the new sound pressure level inside the cavity.
Answer and steps
Final answer
(a) , ; (b) ; (c) .
Steps
Part (a): Sound Pressure and Peak Amplitude
Sound pressure level ( or ) in decibels is defined in terms of root-mean-square pressure relative to the standard reference threshold of hearing :
Rearrange this formula to solve for :
Substitute and :
For a pure sinusoidal wave, the peak pressure amplitude is related to the root-mean-square value by a factor of :
Part (b): Peak AC Voltage Amplitude
The open-circuit microphone sensitivity relates the output electrical voltage directly to the acoustic pressure fluctuation:
Applying this to peak values:
Substitute and :
(Alternatively, one can find , and then convert to peak voltage via .)
Part (c): Sound Pressure Level After Amplitude Tripling
Because a linear microphone has an output voltage directly proportional to acoustic pressure (), tripling the voltage amplitude implies that the acoustic sound pressure also triples:
Using the logarithmic properties of sound pressure level:
Calculate the level increase:
Add this increase to the initial level:
Common Pitfall: Decibel levels are logarithmic, not linear. Doubling or tripling the amplitude does not double or triple the decibel value; instead, multiplying pressure by a factor adds to the sound pressure level.
Typical errors
01 The student confuses the 20 log10 pressure decibel formula with the 10 log10 power formula, resulting in an incorrect calculated pressure of 5.02 × 10⁻¹ Pa.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Sound pressure level is defined using a prefactor of 20 rather than 10 because sound pressure is an amplitude (field) quantity, and acoustic intensity is proportional to the square of pressure ().
- Step 2Correct
You correctly used the relationship for a sinusoidal tone, but your result was affected by the incorrect value of from the previous step.
- Step 3Correct
You correctly multiplied microphone sensitivity by peak pressure, but the numerical answer inherits the error in pressure from part (a).
- Step 4Correct
Because output voltage is linearly proportional to pressure amplitude, tripling the voltage triples the acoustic pressure. A pressure ratio of 3 increases the sound pressure level by , not .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that the peak amplitude of a sinusoidal wave is times its RMS value.
You correctly used microphone sensitivity to convert between acoustic pressure and electrical voltage.
You recognized that tripling the signal amplitude adds a logarithmic increment to the original decibel level.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou used the power/intensity decibel formula () for pressure and voltage instead of the field/amplitude decibel formula (). Decibels use a multiplier of 10 for energy/power quantities () and 20 for root-power or amplitude quantities () because power is proportional to the square of amplitude.
REASONING PATH
Your ACEpath teacher’s suggested approach- Decibel Rule for Root-Power / Amplitude Quantities
For field or amplitude quantities such as pressure , voltage , and displacement , the decibel level is .
Always verify whether the variable represents power/intensity () or amplitude/pressure () before taking the logarithm.
- Physical Reality Check
Atmospheric pressure is approximately . Standard calibration tones near SPL represent small acoustic perturbations ().
Compare calculated acoustic pressures against ambient atmospheric pressure to catch orders-of-magnitude errors early.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up the sound pressure level definition: .
Invert the expression: .
Find peak pressure: .
Calculate peak voltage: .
Calculate the new sound pressure level with tripled amplitude: .
(a) , ; (b) ; (c)
02 The student calculates the peak voltage using the RMS pressure rather than the peak pressure amplitude, resulting in an underestimated voltage of 50.1 mV.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
To find the peak voltage amplitude , you must multiply the sensitivity by the peak pressure amplitude , not by the RMS pressure .
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated both and from the sound pressure level in part (a).
You correctly used logarithmic properties to determine the new decibel level resulting from a tripled amplitude in part (c).
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeIn part (b), you paired peak voltage with RMS pressure rather than peak pressure .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating peak amplitude with root-mean-square amplitude across physical domains. When applying a linear conversion factor such as microphone sensitivity, the domain representations must match: peak input pressure produces peak output voltage, whereas RMS input pressure produces RMS output voltage.
REASONING PATH
Your ACEpath teacher’s suggested approach- Signal Representation Consistency
Linear sensitivities preserve amplitude types: and .
Before multiplying by sensitivity , verify whether the required output is peak or RMS, and match the input pressure accordingly.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the required quantity as peak voltage: .
Substitute sensitivity and peak pressure .
Compute .
(a) , ; (b) ; (c)
03 The student treats decibels as directly proportional to amplitude and multiplies the decibel level by 3, yielding an incorrect SPL of 282 dB.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
Because sound pressure level is defined logarithmically, scaling the linear pressure by a factor of adds rather than multiplying the decibel value by .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly solved for the root-mean-square pressure from the sound pressure level in decibels.
You accurately converted root-mean-square pressure to peak pressure amplitude for a sinusoidal wave.
You properly applied the microphone sensitivity to calculate the peak voltage amplitude.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed that sound pressure level in decibels scales proportionally with amplitude, confusing linear physical quantities (pressure or voltage) with logarithmic levels. Multiplying an amplitude by a factor corresponds to an additive shift of on the decibel scale.
REASONING PATH
Your ACEpath teacher’s suggested approach- Scaling Rule for Decibels
If pressure or voltage scales by a factor , the level changes by .
Identify whether the given change affects the linear amplitude or the logarithmic level, and apply .
CORRECTED PATH
ACEpath Teacher's DemonstrationDetermine the decibel shift caused by tripling the amplitude: .
Add this increase to the original sound pressure level: .
Lock it in
When calculating decibel levels, when do you use versus ?
Use for power and energy quantities (), and use for field and amplitude quantities () because power is proportional to the square of amplitude (, ).
Similar question
A sound meter measures an acoustic noise level of (SPL re ). Find the root-mean-square pressure of this noise.
Answer
. Key step: .
A condenser microphone with sensitivity is exposed to a pure tone at . Calculate the RMS voltage and the peak-to-peak voltage produced by the microphone.
Answer
, . Key steps: . Then . Peak-to-peak voltage is .
In an experiment, an amplifier's gain is increased so that the acoustic pressure amplitude in a standing wave tube increases from to . (a) By how many decibels did the sound pressure level increase? (b) If the initial level was , find the new sound intensity in , given the acoustic impedance of air .
Answer
(a) ; (b) . Key steps: (a) Amplitude ratio , so . (b) The new RMS pressure is . Acoustic intensity is .