Resources
A two-lens compound optical system consists of a converging objective lens () and a converging eyepiece lens () aligned along a common optical axis and separated by a distance . An upright object of height is placed at to the left of the objective lens. Ray tracing demonstrates that the intermediate image formed by the objective serves as the object for the eyepiece. (a) Find the intermediate image distance from the objective. (b) Determine the object distance and image distance relative to the eyepiece. (c) Calculate the total system lateral magnification and final image height .
Answer and steps
Final answer
(a) ; (b) (to the left of the eyepiece) and (to the left of the eyepiece); (c) and (inverted relative to the original object).
Steps
Part (a): Intermediate Image Distance from the Objective Lens
The thin-lens equation relates the focal length , object distance , and image distance :
For the objective lens, the focal length is and the object is placed at . Substituting these values into the lens equation:
Isolating :
A positive image distance indicates that the intermediate image is real and located to the right of the objective lens.
Part (b): Object Distance and Image Distance for the Eyepiece
The intermediate image formed by the objective acts as the object for the eyepiece lens.
-
Object Distance for the Eyepiece ():
The total separation between the two lenses is . Since the intermediate image is formed to the right of the objective, the remaining distance to the eyepiece is:Because the intermediate image lies to the left of the eyepiece (light is incident from the left), it is a real object for the eyepiece, so .
-
Image Distance for the Eyepiece ():
Apply the thin-lens equation to the eyepiece using and :The negative sign confirms that the final image is virtual, located to the left of the eyepiece (between the lenses or further to the left, relative to the eyepiece plane).
Pitfall to Avoid: When setting up a multi-lens system, always determine the object distance of the subsequent lens by referencing the position of the intermediate image relative to that lens (), rather than carrying over coordinates measured from the first lens.
Part (c): Total Lateral Magnification and Final Image Height
The lateral magnification of a single thin lens is given by:
-
Magnification of the Objective ():
-
Magnification of the Eyepiece ():
-
Total Lateral Magnification ():
The total magnification of a multi-lens compound system is the product of the individual magnifications: -
Final Image Height ():
Given the original upright object height :
The negative sign indicates that the final virtual image is inverted with respect to the original object.
Typical errors
01 The student adds the lens separation to the first image distance instead of subtracting it to find the second object distance, leading to an incorrect object distance for the eyepiece.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
The intermediate image forms to the right of the objective lens, which is between the two lenses separated by . Therefore, its distance to the eyepiece is , not .
- Step 3Correct
You applied the thin-lens equation correctly, but your result was affected by the incorrect value of from the previous step.
- Step 4Correct
Your magnification formulas and product rule were correct, but the final numerical values were affected by and .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly applied the thin-lens equation to find the intermediate image position .
You correctly calculated the lateral magnification of the objective lens as .
You used the correct relationship for total compound magnification and scaled the final image height proportionally.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou added the lens separation distance to the first image distance instead of subtracting them along the optical axis, placing the intermediate object past the second lens rather than between the lenses.
REASONING PATH
Your ACEpath teacher’s suggested approach- Locating Intermediate Images
In a two-lens system separated by distance , if lens 1 forms a real image at distance to its right, that image lies between the lenses when , so its distance to lens 2 is .
Always sketch the optical axis with both lens positions marked before computing to verify whether the intermediate image is between the lenses or past the second lens.
CORRECTED PATH
ACEpath Teacher's DemonstrationFind the object distance for the eyepiece: .
Apply the thin-lens equation to the eyepiece: , so .
Find the eyepiece lateral magnification: .
Compute the total magnification: .
Calculate the final image height: .
(a) ; (b) , ; (c) ,
02 The student adds individual lens magnifications instead of multiplying them to find the total magnification of the system.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
The total lateral magnification of a multi-lens optical system is the product of the individual magnifications (), not their sum.
- Step 5Correct
You correctly applied the formula , but your result was affected by the incorrect value of from the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly set up and solved the thin-lens equation for both lenses.
You correctly determined the object distance for the second lens from the lens separation distance.
You accurately calculated the individual lateral magnifications and including their signs.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the total magnification of successive optical elements as an additive combination rather than a multiplicative chain of scale factors.
REASONING PATH
Your ACEpath teacher’s suggested approach- Compound System Magnification Rule
Because each lens scales the image height produced by the preceding lens ( and ), the total lateral magnification is the product: .
Always multiply individual lens magnifications when finding total system magnification: .
CORRECTED PATH
ACEpath Teacher's DemonstrationMultiply the two individual magnifications: .
Calculate the final image height using the total magnification: .
(a) ; (b) , ; (c) , (inverted)
03 The student forgets the negative sign in the lateral magnification formula, treating magnification as the ratio of image distance to object distance.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
,
The formula for lateral magnification of a thin lens includes an explicit negative sign: . Omitting this sign made the inverted intermediate image appear upright () and the upright virtual image appear inverted ().
- Step 4Correct
Your total magnification calculation correctly multiplied your individual magnifications, but it relied on the sign-flipped values from the previous step. Because both and had their signs inverted, their product fortuitously yielded the correct final sign.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the thin-lens equation to find the intermediate image distance .
You accurately determined the second object distance using .
You correctly solved for the final image distance .
You correctly recognized that total lateral magnification is the product of individual lens magnifications ().
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeOmitting the leading negative sign in the thin-lens magnification formula .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou defined lateral magnification as instead of , overlooking that a real image formed by a converging lens from a real object is inverted () and a virtual image is upright relative to its object ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Lateral Magnification Definition
For any single thin lens or mirror, lateral magnification is defined as .
Always write the explicit minus sign in before substituting positive or negative distance values.
- Sign-Inversion Verification
A positive (real image) gives (inverted), while a negative (virtual image) gives (upright relative to its immediate object).
Check each lens individually: verify that real images produce negative magnifications and virtual images produce positive magnifications.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the magnification of the objective lens: .
Calculate the magnification of the eyepiece lens: .
Compute the total lateral magnification: .
Calculate the final image height: .
(a) ; (b) , ; (c) ,
Lock it in
In a two-lens system separated by distance , if lens 1 forms a real image at distance to its right, what is the object distance for lens 2 when ?
. Since the image forms between the lenses, its distance to the second lens is the remaining separation distance.
Similar question
A two-lens system has lens 1 () and lens 2 () separated by . An object is placed in front of lens 1. Find the intermediate image distance and the object distance for lens 2.
Answer
, . Key steps: . Then .
In a compound microscope model, an objective lens with forms a real image of an object placed at . The eyepiece has and is separated from the objective by . Determine , the position of the final image relative to the eyepiece.
Answer
(virtual image, in front of the eyepiece). Key steps: . Then . Applying the lens equation for the eyepiece: .
Two converging lenses with and are separated by . An upright object of height is placed to the left of lens 1. Calculate the final image distance and the total magnification .
Answer
and (upright, half size). Key steps: . Next, . Since , the image forms at infinity, or if check : here , rays emerge parallel; if , . With , , .