Resources

A student measures the period TT of a simple pendulum as a function of length LL to test the theoretical model T=2πLgT = 2\pi \sqrt{\frac{L}{g}}. To evaluate the model via linear regression, the student plots T2T^2 on the vertical axis against LL on the horizontal axis. The best-fit regression line yields a slope of S=4.024 s2/mS = 4.024\text{ s}^2/\text{m}. Rather than solving for gg, determine the specific geometric scale parameter: calculate the exact pendulum length LL in meters required for this pendulum system to oscillate with a period of precisely T=2.50 sT = 2.50\text{ s} under this empirical model.

Answer and steps

Final answer

L=1.55 mL = 1.55\text{ m}

Steps

01

Relate the Theoretical Model to the Linear Regression

The theoretical model for the period of a simple pendulum is: T=2πLgT = 2\pi \sqrt{\frac{L}{g}}

Squaring both sides linearizes the equation: T2=(4π2g)LT^2 = \left(\frac{4\pi^2}{g}\right) L

In the plot of T2T^2 versus LL, this corresponds to a straight line passing through the origin of the form: y=S⋅xy = S \cdot x where:

  • The vertical coordinate is y=T2y = T^2
  • The horizontal coordinate is x=Lx = L
  • The slope of the line is S=4π2g=4.024 s2/mS = \frac{4\pi^2}{g} = 4.024\text{ s}^2/\text{m}

Thus, the empirical linear relationship directly connecting period squared and length is: T2=S⋅LT^2 = S \cdot L


02

Solve for the Required Length LL

To find the length corresponding to a period of T=2.50 sT = 2.50\text{ s}, rearrange the empirical relationship for LL: L=T2SL = \frac{T^2}{S}

Substitute the given values: L=(2.50 s)24.024 s2/mL = \frac{(2.50\text{ s})^2}{4.024\text{ s}^2/\text{m}}

L=6.25 s24.024 s2/m≈1.5532 mL = \frac{6.25\text{ s}^2}{4.024\text{ s}^2/\text{m}} \approx 1.5532\text{ m}

Rounding to three significant figures (matching the given value T=2.50 sT = 2.50\text{ s}): L=1.55 mL = 1.55\text{ m}


Common Pitfall to Avoid

  • Unnecessary Intermediate Steps: Do not solve for the acceleration due to gravity gg first (g=4π2Sg = \frac{4\pi^2}{S}). Using the fitted empirical slope SS directly avoids unnecessary intermediate calculations and potential rounding errors.
  • Forgetting to Square TT: The vertical axis represents T2T^2, not TT. Always ensure TT is squared before dividing by the slope.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that the vertical axis represents T² rather than T, erroneously setting T = S · L and obtaining L = 0.621 m.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    T=S⋅L  ⟹  L=TST = S \cdot L \implies L = \frac{T}{S}

    Correct

    T2=S⋅L  ⟹  L=T2ST^2 = S \cdot L \implies L = \frac{T^2}{S}

    The linear regression plots T2T^2 on the vertical axis against LL on the horizontal axis. Therefore, the linear fit represents T2=S⋅LT^2 = S \cdot L, not T=S⋅LT = S \cdot L.

  2. Step 2

    L=2.504.024L = \frac{2.50}{4.024}

    Correct

    L=(2.50)24.024=6.254.024L = \frac{(2.50)^2}{4.024} = \frac{6.25}{4.024}

    You substituted the given numbers correctly into your formula, but the numerator must be T2=(2.50 s)2T^2 = (2.50\text{ s})^2 rather than TT.

  3. Step 3

    L≈0.621 mL \approx 0.621\text{ m}

    Correct

    L≈1.55 mL \approx 1.55\text{ m}

    Evaluating 6.254.024\frac{6.25}{4.024} gives approximately 1.55 m1.55\text{ m} when rounded to three significant figures.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the slope of a linear regression connects the dependent and independent variables directly.

You accurately manipulated the linear equation to solve for the target variable LL.

You performed the numerical division and unit assignment accurately based on your equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Variable Mismatch on Linearized Axis

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You mapped the slope equation directly to TT instead of identifying the actual linearized variable plotted on the vertical axis (y=T2y = T^2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Plotted Variables
  • In any linearized graph y=S⋅xy = S \cdot x, yy is the complete quantity on the vertical axis, not necessarily the raw measurement.

  • Always check the axis labels or statement: here y=T2y = T^2 and x=Lx = L, so the linear relation is T2=S⋅LT^2 = S \cdot L.

Dimensional Verification
  • The units of the slope SS must balance: [S]=[y][x][S] = \frac{[y]}{[x]}.

  • Notice that the slope has units of s2/m\text{s}^2/\text{m}. Dividing TT (seconds) by SS (s2/m\text{s}^2/\text{m}) yields units of m/s\text{m}/\text{s}, not meters. Dividing T2T^2 (s2\text{s}^2) by SS correctly yields meters.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the linearized regression line: y=S⋅x  ⟹  T2=S⋅Ly = S \cdot x \implies T^2 = S \cdot L.

  2. Solve for the length: L=T2SL = \frac{T^2}{S}.

  3. Substitute T=2.50 sT = 2.50\text{ s} and S=4.024 s2/mS = 4.024\text{ s}^2/\text{m}: L=(2.50)24.024=6.254.024L = \frac{(2.50)^2}{4.024} = \frac{6.25}{4.024}.

  4. Compute the value: L≈1.5532 m≈1.55 mL \approx 1.5532\text{ m} \approx 1.55\text{ m}.

Final answer

L=1.55 mL = 1.55\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before writing y=S⋅xy = S \cdot x, explicitly state what mathematical expression represents yy and what represents xx.

  • Perform a quick dimensional check on your final rearranged formula to catch un-squared or un-rooted terms.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the regression relationship by computing L = S · T² instead of dividing by the slope, resulting in L = 25.15 m.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    T2=2.502=6.25 s2T^2 = 2.50^2 = 6.25\text{ s}^2

  2. Step 2

    L=S⋅T2  ⟹  L=4.024⋅6.25L = S \cdot T^2 \implies L = 4.024 \cdot 6.25

    Correct

    T2=S⋅L  ⟹  L=T2S=6.25 s24.024 s2/mT^2 = S \cdot L \implies L = \frac{T^2}{S} = \frac{6.25\text{ s}^2}{4.024\text{ s}^2/\text{m}}

    Because T2T^2 is on the vertical axis (yy) and LL is on the horizontal axis (xx), the regression line is y=S⋅xy = S \cdot x, or T2=S⋅LT^2 = S \cdot L. Solving for length requires dividing T2T^2 by the slope SS, not multiplying.

  3. Step 3

    L=25.15 mL = 25.15\text{ m}

    Correct

    L=1.55 mL = 1.55\text{ m}

    This value follows directly from multiplying rather than dividing by SS.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the squared period T2=6.25 s2T^2 = 6.25\text{ s}^2.

You correctly identified the slope value S=4.024 s2/mS = 4.024\text{ s}^2/\text{m} from the problem statement.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Slope Equation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the dependent and independent axes of the linear plot (y=S⋅xy = S \cdot x), setting x=S⋅yx = S \cdot y instead of solving y=S⋅xy = S \cdot x for x=y/Sx = y/S. Checking the units would have quickly caught this: multiplying (s2/m)×s2(\text{s}^2/\text{m}) \times \text{s}^2 yields s4/m\text{s}^4/\text{m}, not meters.

REASONING PATH
Your ACEpath teacher’s suggested approach
Map Axes to Linear Form
  • For a plot of yy versus xx, the regression equation is y=slope⋅x+intercepty = \text{slope} \cdot x + \text{intercept}.

  • Identify the vertical variable as y=T2y = T^2 and the horizontal variable as x=Lx = L, giving T2=S⋅LT^2 = S \cdot L.

Verify with Dimensional Analysis
  • The calculated physical quantity must have the correct dimensional units.

  • Check that T2S=s2s2/m=m\frac{T^2}{S} = \frac{\text{s}^2}{\text{s}^2/\text{m}} = \text{m}, confirming that division is the correct algebraic operation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the regression equation from the plot axes: T2=S⋅LT^2 = S \cdot L.

  2. Rearrange algebraically for the horizontal variable: L=T2SL = \frac{T^2}{S}.

  3. Substitute the values: L=6.25 s24.024 s2/m≈1.5532 mL = \frac{6.25\text{ s}^2}{4.024\text{ s}^2/\text{m}} \approx 1.5532\text{ m}.

Final answer

L=1.55 mL = 1.55\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down the general linear form y=S⋅xy = S \cdot x explicitly with your plotted variables before isolating the unknown.

  • Perform a quick unit check on your rearranged equation to verify that it yields meters before calculating.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the slope definition as L / T² = S, leading to L = S / T² and an incorrect length of 0.644 m.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    T2=(2.50)2=6.25T^2 = (2.50)^2 = 6.25

  2. Step 2

    S=LT2  ⟹  L=ST2S = \frac{L}{T^2} \implies L = \frac{S}{T^2}

    Correct

    S=ΔyΔx=T2L  ⟹  L=T2SS = \frac{\Delta y}{\Delta x} = \frac{T^2}{L} \implies L = \frac{T^2}{S}

    You plotted T2T^2 on the vertical axis (yy) against LL on the horizontal axis (xx), so the slope is S=riserun=T2LS = \frac{\text{rise}}{\text{run}} = \frac{T^2}{L}. Consequently, T2=S⋅LT^2 = S \cdot L, which rearranges to L=T2SL = \frac{T^2}{S}.

  3. Step 3

    L=4.0246.25  ⟹  L≈0.644 mL = \frac{4.024}{6.25} \implies L \approx 0.644\text{ m}

    Correct

    L=6.25 s24.024 s2/m≈1.55 mL = \frac{6.25\text{ s}^2}{4.024\text{ s}^2/\text{m}} \approx 1.55\text{ m}

    Substituting your values into the inverted formula propagated the error to your final calculation.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly squared the period to find T2=6.25 s2T^2 = 6.25\text{ s}^2.

You recognized that the slope of the linearized fit relates the period squared directly to the pendulum length without needing to calculate gg first.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Slope Definition

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the dependent and independent axes when writing the slope formula, setting slope=xy\text{slope} = \frac{x}{y} instead of slope=ΔyΔx=T2L\text{slope} = \frac{\Delta y}{\Delta x} = \frac{T^2}{L}. You then also made an algebraic transposition error when solving for LL. Checking the units of ST2\frac{S}{T^2} reveals s2/ms2=m−1\frac{\text{s}^2/\text{m}}{\text{s}^2} = \text{m}^{-1} rather than meters.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Axes and Slope Definition
  • For a plot of yy vs. xx, slope=ΔyΔx\text{slope} = \frac{\Delta y}{\Delta x}. When T2T^2 is plotted on the vertical axis and LL on the horizontal axis, slope S=T2L\text{slope } S = \frac{T^2}{L}.

  • Always write y=S⋅xy = S \cdot x explicitly with variable names (T2=S⋅LT^2 = S \cdot L) before isolating the unknown.

Verify with Dimensional Analysis
  • The calculated physical quantity must have the correct target units.

  • Check your expression's units: [L]=[T2][S]=s2s2/m=m[L] = \frac{[T^2]}{[S]} = \frac{\text{s}^2}{\text{s}^2/\text{m}} = \text{m}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Relate the coordinates to the slope: T2=S⋅LT^2 = S \cdot L

  2. Isolate the target variable: L=T2SL = \frac{T^2}{S}

  3. Substitute T2=6.25 s2T^2 = 6.25\text{ s}^2 and S=4.024 s2/mS = 4.024\text{ s}^2/\text{m}: L=6.254.024≈1.5532 mL = \frac{6.25}{4.024} \approx 1.5532\text{ m}

Final answer

L=1.55 mL = 1.55\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the standard line equation y=mx+by = m x + b with your specific physical variables (T2=S⋅LT^2 = S \cdot L) before manipulating it.

  • Perform unit checks on every derived formula to immediately catch inverted fractions.

Lock it in

Similar question

01

A student investigates the relationship between the period TT and mass mm for an ideal mass-spring system, where T=2πmkT = 2\pi \sqrt{\frac{m}{k}}. A linear plot of T2T^2 versus mm yields a slope of S=1.60 s2/kgS = 1.60\text{ s}^2/\text{kg}. What mass mm is required to produce an oscillation period of T=2.0 sT = 2.0\text{ s}?

Answer

m=2.5 kgm = 2.5\text{ kg}. Key steps: Linear model gives T2=S⋅mT^2 = S \cdot m. Solving for mass yields m=T2S=(2.0 s)21.60 s2/kg=4.01.60=2.5 kgm = \frac{T^2}{S} = \frac{(2.0\text{ s})^2}{1.60\text{ s}^2/\text{kg}} = \frac{4.0}{1.60} = 2.5\text{ kg}.

02

In an experiment verifying the velocity of a cart accelerating from rest down an incline, the model is v=2adv = \sqrt{2ad}. A student plots v2v^2 on the vertical axis versus displacement dd on the horizontal axis, obtaining a regression slope of S=5.80 m/s2S = 5.80\text{ m/s}^2. What distance dd must the cart travel to reach a speed of v=4.20 m/sv = 4.20\text{ m/s}?

Answer

d=3.04 md = 3.04\text{ m}. Key steps: Linearized form is v2=S⋅dv^2 = S \cdot d. Rearrange for distance: d=v2S=(4.20 m/s)25.80 m/s2=17.645.80≈3.04 md = \frac{v^2}{S} = \frac{(4.20\text{ m/s})^2}{5.80\text{ m/s}^2} = \frac{17.64}{5.80} \approx 3.04\text{ m}.

03

A student measures the resonant fundamental frequency ff of a vibrating wire of fixed linear mass density as a function of tension FTF_T, governed by f=CFTf = C \sqrt{F_T}. Instead of plotting f2f^2 versus FTF_T, the student plots ff versus FT\sqrt{F_T} and obtains a slope of S=18.5 Hz/N1/2S = 18.5\text{ Hz}/\text{N}^{1/2}. Determine the tension FTF_T required to achieve a resonant frequency of f=74.0 Hzf = 74.0\text{ Hz}.

Answer

FT=16.0 NF_T = 16.0\text{ N}. Key steps: The empirical linear relationship is f=S⋅FTf = S \cdot \sqrt{F_T}. Solving for FT\sqrt{F_T} gives FT=fS=74.018.5=4.00 N1/2\sqrt{F_T} = \frac{f}{S} = \frac{74.0}{18.5} = 4.00\text{ N}^{1/2}. Squaring both sides yields FT=(4.00)2=16.0 NF_T = (4.00)^2 = 16.0\text{ N}.

Loading workspace…