Resources
An acoustic wave propagates through an industrial pipeline carrying pure carbon dioxide gas. The measured wavelength is at a modulation frequency of . (a) Convert to meters and determine the speed of sound in this gas in . (b) If the molar mass of is (convert to ) and the adiabatic index is , use with ideal gas constant to determine the temperature of the gas in degrees Celsius ().
Answer and steps
Final answer
(a) , ; (b) .
Steps
Part (a): Determine the Speed of Sound
-
Convert given units to standard SI units:
- Wavelength:
- Frequency:
- Calculate the wave speed (): Using the wave equation relating speed, frequency, and wavelength: Substitute the known values:
Part (b): Determine the Temperature of the Gas
- Convert molar mass to : The formula requires SI units so that the units of () cancel properly:
- Rearrange the speed of sound formula for temperature (): Given the relation for sound speed in an ideal gas: Square both sides to eliminate the square root: Solve for absolute temperature :
- Substitute the values and calculate : Using , , and :
- Convert absolute temperature to degrees Celsius ():
Common Pitfall: Forgetting to convert the molar mass from to will yield a temperature that is off by a factor of . Always verify that all quantities are converted to base SI units before substituting into thermodynamic equations.
Typical errors
01 The student forgets to convert molar mass from g/mol to kg/mol, resulting in a temperature that is a factor of 1000 too large.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You substituted directly into the equation instead of converting it to the base SI unit (). Because , mass must be in kilograms to cancel properly with .
- Step 4Correct
Your Celsius conversion formula is correct, but the result is inflated by the unconverted molar mass from the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted centimeters to meters and kilohertz to hertz.
You correctly applied the wave speed equation .
You correctly manipulated the thermodynamic sound speed formula to solve for absolute temperature .
You used the correct relationship between Kelvin and degrees Celsius.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote down and substituted it directly without multiplying by to reach .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou overlooked that the gas constant contains base SI units involving kilograms (), requiring molar mass to be in rather than the conventional chemistry unit of .
REASONING PATH
Your ACEpath teacher’s suggested approach- SI Unit Consistency Check
In thermodynamic formulas using the universal gas constant , all mass terms must be in kilograms ( or ).
Always convert molar mass: .
- Physical Sanity Check
Gas flowing through a standard pipeline is generally near ambient room temperature or typical industrial operating temperatures (roughly to ).
If you compute an extreme temperature such as , suspect an unscaled unit factor of .
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert molar mass: .
Substitute into : .
Convert to Celsius: .
(a) , ; (b)
02 The student forgets to square the velocity when isolating temperature from the formula v = √(γRT/M).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
To eliminate the square root from , you must square both sides first, giving and therefore .
- Step 3Correct
This numerical result was carried over from the missing exponent in your rearranged formula.
- Step 4Correct
Your temperature conversion method was correct, but the result was affected by the earlier calculation error.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the wavelength to meters and the frequency to hertz.
You calculated the speed of sound accurately in Part (a).
You properly converted the molar mass from to .
You used the correct conversion formula between Kelvin and degrees Celsius.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou omitted the square on when solving for .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisWhen isolating a variable located inside a square root radical, both sides of the equation must be squared before clearing the denominator.
REASONING PATH
Your ACEpath teacher’s suggested approach- Clear the radical first
For any equation of the form , squaring both sides yields .
Write out the intermediate squared step explicitly before cross-multiplying.
- Check the physical plausibility
Absolute zero is (); gas temperatures in industrial pipelines are typically near ambient temperatures.
A computed temperature near () indicates an exponent or power-of-ten mistake.
CORRECTED PATH
ACEpath Teacher's DemonstrationSquare both sides: .
Multiply by and divide by : .
Substitute the known values: .
Convert to degrees Celsius: .
(a) , ; (b)
03 The student calculates the temperature in kelvins correctly but forgets to convert to degrees Celsius as requested.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
Your numeric calculation gives the correct absolute temperature in kelvins, but the problem explicitly asks for the temperature in degrees Celsius ().
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the wave parameters into base SI units and determined the speed of sound.
You correctly converted the molar mass from to .
You rearranged the ideal gas sound speed equation algebraically without error and obtained the correct temperature in kelvins.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou stopped once you calculated the absolute temperature and omitted the final subtraction of to convert to degrees Celsius.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisThermodynamic formulas such as naturally yield temperature in kelvins (), so reaching a valid numeric answer often creates a false sense of completion unless you cross-check against the target unit specified in the prompt.
REASONING PATH
Your ACEpath teacher’s suggested approach- Target Unit Check
Always reread the final sentence of the question to confirm the required output unit before writing your final answer.
Check whether the question asks for temperature in kelvins () or degrees Celsius (); apply when Celsius is requested.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the absolute temperature to degrees Celsius using .
(or depending on rounding).
Lock it in
Why must molar mass be converted from to when using ?
Because uses joules, and . The mass unit in joules is kilograms, so molar mass must be in for units to cancel.
Similar question
The speed of sound in argon gas (monoatomic, ) is measured to be . Given the molar mass of argon is and , determine the temperature of the gas in Kelvin.
Answer
.
- Convert molar mass to SI units: .
- Solve for : .
Air can be modeled as an ideal gas with equivalent molar mass and adiabatic index . Calculate the speed of sound in air at a temperature of . Use .
Answer
.
- Convert temperature to Kelvin: .
- Convert molar mass to SI units: .
- Calculate speed: .
Helium gas (, ) and neon gas (, ) are at the same temperature . Determine the ratio of the speed of sound in helium to that in neon, , and state whether converting to affects this specific ratio.
Answer
. The conversion factor cancels out in the ratio, but is strictly required whenever absolute speed or temperature is calculated.
- Express the ratio: .
- Substitute values: .