Resources

A test vehicle travels along a straight testing track with a velocity of v⃗(t)=(18.0−6.00t)ı^ m/s\vec{v}(t) = (18.0 - 6.00t)\hat{\imath}\text{ m/s}, where tt is in seconds and the positive direction is east. Consider the exact turnaround boundary at t=3.00 st = 3.00\text{ s} where instantaneous velocity becomes zero: v⃗(3.00)=0 m/s\vec{v}(3.00) = 0\text{ m/s}. (a) Calculate the instantaneous acceleration vector a⃗(3.00 s)\vec{a}(3.00\text{ s}). (b) For an infinitesimal interval [3.00 s−ϵ,3.00 s+ϵ][3.00\text{ s} - \epsilon, 3.00\text{ s} + \epsilon] with ϵ=0.50 s\epsilon = 0.50\text{ s}, calculate Δv⃗=v⃗(3.50 s)−v⃗(2.50 s)\Delta\vec{v} = \vec{v}(3.50\text{ s}) - \vec{v}(2.50\text{ s}). (c) Address the common misconception: explain why a non-zero velocity change Δv⃗\Delta\vec{v} and non-zero acceleration a⃗\vec{a} exist at the exact turnaround point despite the instantaneous speed being zero.

Answer and steps

Final answer

(a) a⃗(3.00 s)=−6.00ı^ m/s2\vec{a}(3.00\text{ s}) = -6.00\hat{\imath}\text{ m/s}^2 (directed westward); (b) Δv⃗=−6.00ı^ m/s\Delta\vec{v} = -6.00\hat{\imath}\text{ m/s} (directed westward); (c) Acceleration describes the time rate of change of velocity (dv⃗dt\frac{\mathrm{d}\vec{v}}{\mathrm{d}t}), not the value of velocity itself; at the turnaround point, velocity is passing continuously through zero from positive to negative, so Δv⃗\Delta\vec{v} is strictly negative and nonzero, demanding a non-zero westward acceleration.

Steps

Part (a): Determining the Instantaneous Acceleration Vector

Instantaneous acceleration is defined as the time derivative of the velocity vector: a⃗(t)=dv⃗dt\vec{a}(t) = \frac{\mathrm{d}\vec{v}}{\mathrm{d}t}

Given the velocity function: v⃗(t)=(18.0−6.00t)ı^ m/s\vec{v}(t) = (18.0 - 6.00t)\hat{\imath}\text{ m/s}

Differentiating with respect to time tt: a⃗(t)=ddt(18.0−6.00t)ı^=−6.00ı^ m/s2\vec{a}(t) = \frac{\mathrm{d}}{\mathrm{d}t}(18.0 - 6.00t)\hat{\imath} = -6.00\hat{\imath}\text{ m/s}^2

Because the acceleration is constant for all tt, evaluating it at t=3.00 st = 3.00\text{ s} yields: a⃗(3.00 s)=−6.00ı^ m/s2\vec{a}(3.00\text{ s}) = -6.00\hat{\imath}\text{ m/s}^2

The negative sign indicates that the acceleration vector points in the negative xx-direction (westward).


Part (b): Calculating the Change in Velocity Δv⃗\Delta\vec{v}

The time interval is centered at t=3.00 st = 3.00\text{ s} with ϵ=0.50 s\epsilon = 0.50\text{ s}, spanning from t1=3.00−0.50=2.50 st_1 = 3.00 - 0.50 = 2.50\text{ s} to t2=3.00+0.50=3.50 st_2 = 3.00 + 0.50 = 3.50\text{ s}.

  1. Evaluate the velocity at the start of the interval, t1=2.50 st_1 = 2.50\text{ s}: v⃗(2.50 s)=[18.0−6.00(2.50)]ı^=(18.0−15.0)ı^=+3.00ı^ m/s\vec{v}(2.50\text{ s}) = [18.0 - 6.00(2.50)]\hat{\imath} = (18.0 - 15.0)\hat{\imath} = +3.00\hat{\imath}\text{ m/s}
  2. Evaluate the velocity at the end of the interval, t2=3.50 st_2 = 3.50\text{ s}: v⃗(3.50 s)=[18.0−6.00(3.50)]ı^=(18.0−21.0)ı^=−3.00ı^ m/s\vec{v}(3.50\text{ s}) = [18.0 - 6.00(3.50)]\hat{\imath} = (18.0 - 21.0)\hat{\imath} = -3.00\hat{\imath}\text{ m/s}
  3. Calculate the change in velocity vector Δv⃗\Delta\vec{v}: Δv⃗=v⃗(3.50 s)−v⃗(2.50 s)\Delta\vec{v} = \vec{v}(3.50\text{ s}) - \vec{v}(2.50\text{ s}) Δv⃗=(−3.00ı^)−(+3.00ı^)=−6.00ı^ m/s\Delta\vec{v} = (-3.00\hat{\imath}) - (+3.00\hat{\imath}) = -6.00\hat{\imath}\text{ m/s}

Thus, over this 1.00 s1.00\text{ s} window, the vehicle's velocity changes by 6.00 m/s6.00\text{ m/s} in the westward direction.


Part (c): Explaining the Misconception at the Turnaround Point

  • Common Pitfall: A frequent misconception is confusing instantaneous velocity with the rate of change of velocity, leading to the assumption that if an object is momentarily at rest (v⃗=0⃗\vec{v} = \vec{0}), its acceleration must also be zero (a⃗=0⃗\vec{a} = \vec{0}).
  • Physical Basis:
    • Velocity, v⃗(t)\vec{v}(t), describes the vehicle's current state of motion at an instant.
    • Acceleration, a⃗(t)=dv⃗dt\vec{a}(t) = \frac{\mathrm{d}\vec{v}}{\mathrm{d}t}, describes how rapidly that state of motion is changing at that instant.
  • Turnaround Analysis: At t=3.00 st = 3.00\text{ s}, the vehicle comes to a stop instantaneously before reversing direction. Immediately before this instant (t<3.00 st < 3.00\text{ s}), it is moving eastward (v⃗>0\vec{v} > 0); immediately after (t>3.00 st > 3.00\text{ s}), it is moving westward (v⃗<0\vec{v} < 0).
  • For the velocity to transition smoothly from positive values through zero to negative values, it must be continuously decreasing. Therefore, the difference Δv⃗=v⃗final−v⃗initial\Delta\vec{v} = \vec{v}_\text{final} - \vec{v}_\text{initial} across any symmetric time interval containing t=3.00 st = 3.00\text{ s} is strictly negative and nonzero. Because this rate of change is nonzero, the vehicle must experience a nonzero westward acceleration (a⃗=−6.00ı^ m/s2\vec{a} = -6.00\hat{\imath}\text{ m/s}^2) at the exact turnaround point.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student assumes that zero instantaneous velocity at a turnaround point implies zero instantaneous acceleration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Since v(3.00 s)=0 m/s, the vehicle is momentarily at rest.  ⟹  a(3.00 s)=0ı^ m/s2\text{Since } v(3.00\text{ s}) = 0\text{ m/s}, \text{ the vehicle is momentarily at rest.} \implies a(3.00\text{ s}) = 0\hat{\imath}\text{ m/s}^2

    Correct

    a⃗(t)=dv⃗dt=−6.00ı^ m/s2  ⟹  a⃗(3.00 s)=−6.00ı^ m/s2\vec{a}(t) = \frac{\mathrm{d}\vec{v}}{\mathrm{d}t} = -6.00\hat{\imath}\text{ m/s}^2 \implies \vec{a}(3.00\text{ s}) = -6.00\hat{\imath}\text{ m/s}^2

    You set the instantaneous acceleration to zero because the instantaneous velocity is zero. Acceleration is defined as the derivative a⃗(t)=dv⃗dt\vec{a}(t) = \frac{\mathrm{d}\vec{v}}{\mathrm{d}t}, which equals −6.00ı^ m/s2-6.00\hat{\imath}\text{ m/s}^2 at all times, including when v⃗=0⃗\vec{v} = \vec{0}.

  2. Step 2

    v(3.50 s)=(18.0−6.00(3.50))ı^=−3.00ı^ m/s  ⟹  v(2.50 s)=(18.0−6.00(2.50))ı^=3.00ı^ m/s  ⟹  Δv=−3.00ı^−3.00ı^=−6.00ı^ m/sv(3.50\text{ s}) = (18.0 - 6.00(3.50))\hat{\imath} = -3.00\hat{\imath}\text{ m/s} \implies v(2.50\text{ s}) = (18.0 - 6.00(2.50))\hat{\imath} = 3.00\hat{\imath}\text{ m/s} \implies \Delta v = -3.00\hat{\imath} - 3.00\hat{\imath} = -6.00\hat{\imath}\text{ m/s}

  3. Step 3

    At the turnaround point the acceleration is zero because the vehicle is stopped, but over the interval Δt=1.00 s the velocity changes by Δv=−6.00ı^ m/s.\text{At the turnaround point the acceleration is zero because the vehicle is stopped, but over the interval } \Delta t = 1.00\text{ s} \text{ the velocity changes by } \Delta v = -6.00\hat{\imath}\text{ m/s}.

    Correct

    Acceleration is a⃗=lim⁡Δt→0Δv⃗Δt=dv⃗dt=−6.00ı^ m/s2; because velocity continuously decreases through zero, a⃗≠0⃗.\text{Acceleration is } \vec{a} = \lim_{\Delta t \to 0} \frac{\Delta\vec{v}}{\Delta t} = \frac{\mathrm{d}\vec{v}}{\mathrm{d}t} = -6.00\hat{\imath}\text{ m/s}^2\text{; because velocity continuously decreases through zero, } \vec{a} \neq \vec{0}\text{.}

    You maintained that acceleration must be zero when an object is momentarily stopped. At a turnaround point, velocity passes through zero because it is continuously changing from positive to negative, which requires a non-zero rate of change dv⃗dt\frac{\mathrm{d}\vec{v}}{\mathrm{d}t}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly substituted the evaluated times into the velocity function to find v⃗(3.50 s)\vec{v}(3.50\text{ s}) and v⃗(2.50 s)\vec{v}(2.50\text{ s}).

You properly applied vector subtraction to determine the net velocity change Δv⃗\Delta\vec{v} across the symmetric interval.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Velocity-Acceleration Equivalence Fallacy

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the value of a function with the value of its derivative, assuming that an instantaneous velocity of zero requires instantaneous acceleration to also be zero.

REASONING PATH
Your ACEpath teacher’s suggested approach
Derivative vs. Instantaneous Value
  • Instantaneous acceleration is a⃗(t)=dv⃗dt\vec{a}(t) = \frac{\mathrm{d}\vec{v}}{\mathrm{d}t}, which depends on the slope of v⃗(t)\vec{v}(t), not its instantaneous value v⃗(t)\vec{v}(t).

  • Differentiate the velocity function directly with respect to time before evaluating at specific time values.

Physical Meaning of Turnaround
  • An object changing direction passes through v⃗=0⃗\vec{v} = \vec{0} instantaneously while its velocity is continually changing.

  • Check the sign of v⃗\vec{v} immediately before and after the turnaround point; if the sign changes, Δv⃗≠0⃗\Delta\vec{v} \neq \vec{0} and acceleration cannot be zero.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Differentiate v⃗(t)=(18.0−6.00t)ı^ m/s\vec{v}(t) = (18.0 - 6.00t)\hat{\imath}\text{ m/s} with respect to time: a⃗(t)=dv⃗dt=−6.00ı^ m/s2\vec{a}(t) = \frac{\mathrm{d}\vec{v}}{\mathrm{d}t} = -6.00\hat{\imath}\text{ m/s}^2.

  2. Evaluate at t=3.00 st = 3.00\text{ s}: a⃗(3.00 s)=−6.00ı^ m/s2\vec{a}(3.00\text{ s}) = -6.00\hat{\imath}\text{ m/s}^2 directed westward.

  3. For part (c), recognize that as tt advances through 3.00 s3.00\text{ s}, velocity changes smoothly from +3.00ı^ m/s+3.00\hat{\imath}\text{ m/s} at t=2.50 st = 2.50\text{ s} to −3.00ı^ m/s-3.00\hat{\imath}\text{ m/s} at t=3.50 st = 3.50\text{ s}. The ratio Δv⃗Δt=−6.00ı^ m/s1.00 s=−6.00ı^ m/s2\frac{\Delta\vec{v}}{\Delta t} = \frac{-6.00\hat{\imath}\text{ m/s}}{1.00\text{ s}} = -6.00\hat{\imath}\text{ m/s}^2 confirms that the slope is constantly non-zero throughout the transition.

Final answer

(a) a⃗(3.00 s)=−6.00ı^ m/s2\vec{a}(3.00\text{ s}) = -6.00\hat{\imath}\text{ m/s}^2; (b) Δv⃗=−6.00ı^ m/s\Delta\vec{v} = -6.00\hat{\imath}\text{ m/s}; (c) Acceleration is the derivative dv⃗dt\frac{\mathrm{d}\vec{v}}{\mathrm{d}t}, not velocity itself; since velocity passes continuously from positive to negative, its slope and rate of change are non-zero.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice finding instantaneous acceleration by taking dv⃗dt\frac{\mathrm{d}\vec{v}}{\mathrm{d}t} before plugging in any specific time values.

  • Review analogous turnaround examples, such as a ball thrown vertically at the peak of its flight where v=0v = 0 but a=−ga = -g.

OverviewACEpath Teacher's Diagnosis

02 The student reverses the order of subtraction when calculating the change in velocity, computing initial minus final instead of final minus initial.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    a(t)=dvdt=−6.00ı^ m/s2  ⟹  a(3.00 s)=−6.00ı^ m/s2a(t) = \frac{\mathrm{d}v}{\mathrm{d}t} = -6.00\hat{\imath}\text{ m/s}^2 \implies a(3.00\text{ s}) = -6.00\hat{\imath}\text{ m/s}^2

  2. Step 2

    v(3.50 s)=(18.0−6.00(3.50))ı^=−3.00ı^ m/sv(3.50\text{ s}) = (18.0 - 6.00(3.50))\hat{\imath} = -3.00\hat{\imath}\text{ m/s}, v(2.50 s)=(18.0−6.00(2.50))ı^=3.00ı^ m/sv(2.50\text{ s}) = (18.0 - 6.00(2.50))\hat{\imath} = 3.00\hat{\imath}\text{ m/s}

  3. Step 3

    Δv=v(2.50 s)−v(3.50 s)=3.00ı^−(−3.00ı^)=6.00ı^ m/s\Delta v = v(2.50\text{ s}) - v(3.50\text{ s}) = 3.00\hat{\imath} - (-3.00\hat{\imath}) = 6.00\hat{\imath}\text{ m/s}

    Correct

    Δv⃗=v⃗(3.50 s)−v⃗(2.50 s)=−3.00ı^−3.00ı^=−6.00ı^ m/s\Delta\vec{v} = \vec{v}(3.50\text{ s}) - \vec{v}(2.50\text{ s}) = -3.00\hat{\imath} - 3.00\hat{\imath} = -6.00\hat{\imath}\text{ m/s}

    Any change Δ\Delta is strictly defined as final value minus initial value: Δv⃗=v⃗(t2)−v⃗(t1)\Delta\vec{v} = \vec{v}(t_2) - \vec{v}(t_1). By writing v⃗(2.50 s)−v⃗(3.50 s)\vec{v}(2.50\text{ s}) - \vec{v}(3.50\text{ s}), you subtracted the later state from the earlier state, resulting in an incorrect positive sign.

  4. Step 4

    Acceleration and velocity change depend on the rate at which velocity changes across time, so even when velocity is zero at an instant, it is continuously changing from eastward to westward.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly differentiated the velocity function to find the constant acceleration vector.

You evaluated the velocity function accurately at t=2.50 st = 2.50\text{ s} and t=3.50 st = 3.50\text{ s}.

You provided a solid conceptual explanation distinguishing instantaneous velocity from its rate of change.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed order of subtraction in delta calculation

You set up Δv⃗\Delta\vec{v} as earlier time minus later time, which inverted the direction of the vector change.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

The change operator Δ\Delta in physics and calculus is always defined as ΔX=Xfinal−Xinitial\Delta X = X_\text{final} - X_\text{initial}. Swapping this order flips the sign of the vector change, conflicting with the direction of the acceleration vector a⃗avg=Δv⃗Δt\vec{a}_{\text{avg}} = \frac{\Delta\vec{v}}{\Delta t}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Definition of Delta (Change)
  • For any quantity X(t)X(t), the change over an interval [t1,t2][t_1, t_2] is ΔX=X(t2)−X(t1)=Xfinal−Xinitial\Delta X = X(t_2) - X(t_1) = X_\text{final} - X_\text{initial}.

  • Always write the final state first when computing differences: Δv⃗=v⃗f−v⃗i\Delta\vec{v} = \vec{v}_f - \vec{v}_i.

Vector Consistency Check
  • Average acceleration points in the exact same direction as velocity change: a⃗avg=Δv⃗Δt\vec{a}_{\text{avg}} = \frac{\Delta\vec{v}}{\Delta t}.

  • Check whether your calculated Δv⃗\Delta\vec{v} has the same sign/direction as your acceleration vector.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the definition of change: Δv⃗=v⃗(3.50 s)−v⃗(2.50 s)\Delta\vec{v} = \vec{v}(3.50\text{ s}) - \vec{v}(2.50\text{ s}).

  2. Substitute the calculated velocity values: Δv⃗=(−3.00ı^ m/s)−(+3.00ı^ m/s)\Delta\vec{v} = (-3.00\hat{\imath}\text{ m/s}) - (+3.00\hat{\imath}\text{ m/s}).

  3. Simplify the vector subtraction: Δv⃗=−6.00ı^ m/s\Delta\vec{v} = -6.00\hat{\imath}\text{ m/s}.

Final answer

Δv⃗=−6.00ı^ m/s\Delta\vec{v} = -6.00\hat{\imath}\text{ m/s} (directed westward)

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize that Δ\Delta strictly denotes 'final minus initial' in every physics formula.

  • Before finalizing a vector change, verify that Δv⃗\Delta\vec{v} has the same direction as a⃗\vec{a}.

OverviewACEpath Teacher's Diagnosis

03 The student treats velocity as a scalar speed and subtracts magnitudes, incorrectly concluding that the change in velocity is zero across the symmetric interval.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    a⃗(t)=dv⃗dt=−6.00ı^ m/s2  ⟹  a⃗(3.00 s)=−6.00ı^ m/s2\vec{a}(t) = \frac{\mathrm{d}\vec{v}}{\mathrm{d}t} = -6.00\hat{\imath}\text{ m/s}^2 \implies \vec{a}(3.00\text{ s}) = -6.00\hat{\imath}\text{ m/s}^2

  2. Step 2

    v(3.50 s) has speed 3.00 m/s,  v(2.50 s) has speed 3.00 m/s  ⟹  Δv⃗=(3.00−3.00)ı^=0ı^ m/sv(3.50\text{ s})\text{ has speed }3.00\text{ m/s},\; v(2.50\text{ s})\text{ has speed }3.00\text{ m/s} \implies \Delta\vec{v} = (3.00 - 3.00)\hat{\imath} = 0\hat{\imath}\text{ m/s}

    Correct

    v⃗(3.50 s)=−3.00ı^ m/s,  v⃗(2.50 s)=+3.00ı^ m/s  ⟹  Δv⃗=v⃗(3.50 s)−v⃗(2.50 s)=−6.00ı^ m/s\vec{v}(3.50\text{ s}) = -3.00\hat{\imath}\text{ m/s},\; \vec{v}(2.50\text{ s}) = +3.00\hat{\imath}\text{ m/s} \implies \Delta\vec{v} = \vec{v}(3.50\text{ s}) - \vec{v}(2.50\text{ s}) = -6.00\hat{\imath}\text{ m/s}

    You subtracted the magnitudes (speeds) rather than evaluating the signed velocity vectors. At t=3.50 st = 3.50\text{ s}, the vehicle is moving westward with velocity v⃗(3.50 s)=−3.00ı^ m/s\vec{v}(3.50\text{ s}) = -3.00\hat{\imath}\text{ m/s}, so Δv⃗=(−3.00ı^)−(+3.00ı^)=−6.00ı^ m/s\Delta\vec{v} = (-3.00\hat{\imath}) - (+3.00\hat{\imath}) = -6.00\hat{\imath}\text{ m/s}.

  3. Step 3

    The velocity change is zero because the speeds at equal times before and after turnaround are equal, though instantaneous acceleration remains non-zero.

    Correct

    At the turnaround point, velocity passes continuously through zero from eastward (+x+x) to westward (−x-x). Across any interval enclosing t=3.00 st = 3.00\text{ s}, the final velocity is less than the initial velocity, producing a nonzero negative change Δv⃗\Delta\vec{v}. Acceleration is the time rate of change of velocity (dv⃗dt\frac{\mathrm{d}\vec{v}}{\mathrm{d}t}), which is non-zero because the velocity is actively changing direction.

    Your explanation relied on the misconception that the velocity change across turnaround is zero. While the speeds are equal at symmetric times, the directions are opposite, meaning Δv⃗≠0⃗\Delta\vec{v} \neq \vec{0}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly differentiated the vector equation v⃗(t)\vec{v}(t) with respect to time to obtain a⃗(t)\vec{a}(t).

You correctly identified the unit vector ı^\hat{\imath} and maintained consistent dimensional units in part (a).

You correctly evaluated the numerical speeds at t=2.50 st = 2.50\text{ s} and t=3.50 st = 3.50\text{ s} as 3.00 m/s3.00\text{ m/s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Velocity vs. Speed Sign Confusion

You dropped the directional signs of v⃗(t)\vec{v}(t) and substituted scalar speeds directly into a vector difference.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing scalar speed with vector velocity leads to treating reversed motion as an identical state rather than recognizing that a reversal of direction creates a large, nonzero change in velocity: Δv⃗=v⃗f−v⃗i=(−v)ı^−(+v)ı^=−2vı^\Delta\vec{v} = \vec{v}_f - \vec{v}_i = (-v)\hat{\imath} - (+v)\hat{\imath} = -2v\hat{\imath}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Evaluate Vector Components Directly
  • Always plug the time into the algebraic velocity function v⃗(t)\vec{v}(t) to preserve the correct sign before computing Δv⃗\Delta\vec{v}.

  • Calculate v⃗(3.50)=[18.0−6.00(3.50)]ı^=−3.00ı^ m/s\vec{v}(3.50) = [18.0 - 6.00(3.50)]\hat{\imath} = -3.00\hat{\imath}\text{ m/s} instead of taking absolute values.

Distinguish Zero Velocity from Zero Acceleration
  • An object at rest at an instant can still have an acceleration if its velocity is changing through zero at that instant.

  • Check the slope of the vv-tt graph at v=0v = 0; if the slope is nonzero, a⃗≠0⃗\vec{a} \neq \vec{0}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Evaluate initial velocity at t=2.50 st = 2.50\text{ s}: v⃗(2.50 s)=[18.0−6.00(2.50)]ı^=+3.00ı^ m/s\vec{v}(2.50\text{ s}) = [18.0 - 6.00(2.50)]\hat{\imath} = +3.00\hat{\imath}\text{ m/s}.

  2. Evaluate final velocity at t=3.50 st = 3.50\text{ s}: v⃗(3.50 s)=[18.0−6.00(3.50)]ı^=−3.00ı^ m/s\vec{v}(3.50\text{ s}) = [18.0 - 6.00(3.50)]\hat{\imath} = -3.00\hat{\imath}\text{ m/s}.

  3. Subtract initial from final vector: Δv⃗=v⃗(3.50 s)−v⃗(2.50 s)=(−3.00ı^)−(+3.00ı^)=−6.00ı^ m/s\Delta\vec{v} = \vec{v}(3.50\text{ s}) - \vec{v}(2.50\text{ s}) = (-3.00\hat{\imath}) - (+3.00\hat{\imath}) = -6.00\hat{\imath}\text{ m/s}.

  4. Explain part (c): Because Δv⃗=−6.00ı^ m/s≠0⃗\Delta\vec{v} = -6.00\hat{\imath}\text{ m/s} \neq \vec{0}, the average acceleration Δv⃗Δt=−6.00ı^1.00=−6.00ı^ m/s2\frac{\Delta\vec{v}}{\Delta t} = \frac{-6.00\hat{\imath}}{1.00} = -6.00\hat{\imath}\text{ m/s}^2 matches the instantaneous acceleration, confirming that velocity is actively changing from positive to negative even while passing momentarily through zero.

Final answer

(b) Δv⃗=−6.00ı^ m/s\Delta\vec{v} = -6.00\hat{\imath}\text{ m/s}; (c) While instantaneous speed is momentarily zero at turnaround, the velocity vector is continuously transitioning from eastward to westward, resulting in a nonzero change in velocity Δv⃗\Delta\vec{v} and therefore a nonzero acceleration.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice writing vector components with explicit signs (+,−)(+,-) rather than working with scalar magnitudes when calculating differences.

  • Sketch vv-tt graphs around turnaround points to visualize how a continuous negative slope naturally crosses the v=0v=0 axis.

Lock it in

Similar question

01

A particle moves along the xx-axis with position x(t)=2t3−6t2+10 mx(t) = 2t^3 - 6t^2 + 10\text{ m}. Find the particle's acceleration when its velocity is zero for t>0t > 0.

Answer
  1. Find velocity: v(t)=dxdt=6t2−12t=6t(t−2)v(t) = \frac{\mathrm{d}x}{\mathrm{d}t} = 6t^2 - 12t = 6t(t - 2). For t>0t > 0, v(t)=0v(t) = 0 at t=2 st = 2\text{ s}.\n2. Find acceleration: a(t)=dvdt=12t−12a(t) = \frac{\mathrm{d}v}{\mathrm{d}t} = 12t - 12.\n3. Evaluate at t=2 st = 2\text{ s}: a(2)=12(2)−12=12 m/s2a(2) = 12(2) - 12 = 12\text{ m/s}^2.
02

A model rocket launched vertically reaches its maximum height where v=0 m/sv = 0\text{ m/s}. During a time interval of 0.20 s0.20\text{ s} centered around this peak, its velocity changes from +0.98 m/s+0.98\text{ m/s} to −0.98 m/s-0.98\text{ m/s}. Calculate the average acceleration a⃗avg\vec{a}_{\text{avg}} across this interval and compare it to the instantaneous acceleration at the peak.

Answer
  1. Calculate change in velocity: Δv=vf−vi=−0.98−(+0.98)=−1.96 m/s\Delta v = v_f - v_i = -0.98 - (+0.98) = -1.96\text{ m/s}.\n2. Calculate average acceleration: aavg=ΔvΔt=−1.96 m/s0.20 s=−9.80 m/s2a_{\text{avg}} = \frac{\Delta v}{\Delta t} = \frac{-1.96\text{ m/s}}{0.20\text{ s}} = -9.80\text{ m/s}^2.\n3. Since gravity is constant, the instantaneous acceleration at the peak is also a=−9.80 m/s2a = -9.80\text{ m/s}^2 downward.
03

An oscillating mass on a spring has velocity v(t)=−ωAsin⁡(ωt)v(t) = -\omega A \sin(\omega t). At the turning point where the mass reaches its maximum displacement x=Ax = A, what is its velocity, and what is its instantaneous acceleration in terms of ω\omega and AA?

Answer
  1. At the turning point x=Ax = A, the mass halts momentarily, so v=0 m/sv = 0\text{ m/s} (which occurs when sin⁡(ωt)=0\sin(\omega t) = 0, meaning cos⁡(ωt)=1\cos(\omega t) = 1).\n2. Differentiate velocity to find acceleration: a(t)=dvdt=−ω2Acos⁡(ωt)a(t) = \frac{\mathrm{d}v}{\mathrm{d}t} = -\omega^2 A \cos(\omega t).\n3. At this turning point, a=−ω2Aa = -\omega^2 A, showing that maximum acceleration occurs precisely where velocity is zero.
Loading workspace…