Resources

A student in an introductory physics laboratory tests the acoustic intensity formula β=(10 dB)log⁡10(I/I0)\beta = (10\text{ dB})\log_{10}(I/I_0) with two identical speakers driven at the same single frequency. Speaker 1 produces an intensity I1I_1 with sound level β1=70.0 dB\beta_1 = 70.0\text{ dB}. When Speaker 2 is turned on simultaneously, the student observes the total sound level rises to βtot=76.0 dB\beta_{\text{tot}} = 76.0\text{ dB}. The student incorrectly assumes the two sources are mutually incoherent and concludes that doubling the number of speakers doubled the intensity. However, the speakers are completely coherent and in phase, meaning their wave amplitudes add constructively before intensity is evaluated (Atot=A1+A2=2A1A_{\text{tot}} = A_1 + A_2 = 2A_1). (a) Under coherent, constructive interference (Atot=2A1A_{\text{tot}} = 2A_1), determine the theoretical intensity ratio Itot, coherentI1\frac{I_{\text{tot, coherent}}}{I_1} and the corresponding increase in sound level Δβcoherent\Delta \beta_{\text{coherent}}. (b) Contrast this with an incoherent sum of two identical sources (Itot, incoherent=2I1I_{\text{tot, incoherent}} = 2I_1) by calculating Δβincoherent\Delta \beta_{\text{incoherent}}, explaining why decibels do not scale linearly with amplitude.

Answer and steps

Final answer

(a) Itot, coherentI1=4.00\frac{I_{\text{tot, coherent}}}{I_1} = 4.00, yielding Δβcoherent=6.02 dB≈6.0 dB\Delta \beta_{\text{coherent}} = 6.02\text{ dB} \approx 6.0\text{ dB} (matching the observed 76.0 dB76.0\text{ dB}); (b) For incoherent addition, Itot, incoherentI1=2.00\frac{I_{\text{tot, incoherent}}}{I_1} = 2.00, yielding Δβincoherent=3.01 dB≈3.0 dB\Delta \beta_{\text{incoherent}} = 3.01\text{ dB} \approx 3.0\text{ dB}. Decibels quantify logarithmic power ratios rather than linear amplitude sums.

Steps

Part (a): Coherent, Constructive Addition

  1. Relationship Between Wave Amplitude and Intensity
    The intensity II of a sound wave is directly proportional to the square of its pressure (or displacement) amplitude AA: I∝A2I \propto A^2 When two identical speakers emit coherent sound waves completely in phase, their amplitudes add directly by superposition: Atot=A1+A2=A1+A1=2A1A_{\text{tot}} = A_1 + A_2 = A_1 + A_1 = 2A_1
  2. Calculate the Coherent Intensity Ratio
    Taking the ratio of total intensity to single-speaker intensity: Itot, coherentI1=(AtotA1)2=(2A1A1)2=22=4.00\frac{I_{\text{tot, coherent}}}{I_1} = \left(\frac{A_{\text{tot}}}{A_1}\right)^2 = \left(\frac{2A_1}{A_1}\right)^2 = 2^2 = 4.00 Doubling the wave amplitude quadruples the sound intensity.
  3. Calculate the Change in Sound Intensity Level (Δβ\Delta \beta)
    Sound level in decibels is defined as β=(10 dB)log⁡10(I/I0)\beta = (10\text{ dB})\log_{10}(I/I_0). The difference in sound level between the combined sound and a single speaker is: Δβcoherent=βtot−β1=(10 dB)log⁡10(Itot, coherentI1)\Delta \beta_{\text{coherent}} = \beta_{\text{tot}} - \beta_1 = (10\text{ dB})\log_{10}\left(\frac{I_{\text{tot, coherent}}}{I_1}\right) Substitute the intensity ratio of 4.004.00: Δβcoherent=(10 dB)log⁡10(4.00)≈(10 dB)(0.6021)=6.02 dB≈6.0 dB\Delta \beta_{\text{coherent}} = (10\text{ dB})\log_{10}(4.00) \approx (10\text{ dB})(0.6021) = 6.02\text{ dB} \approx 6.0\text{ dB} Adding this to the initial level β1=70.0 dB\beta_1 = 70.0\text{ dB} gives βtot=76.0 dB\beta_{\text{tot}} = 76.0\text{ dB}, exactly matching the lab observation.

Part (b): Incoherent Addition vs. Coherent Addition

  1. Calculate the Incoherent Sound Level Increase
    If the sources are mutually incoherent (random, fluctuating phase difference), their interference terms average to zero over time, meaning their intensities (powers) add directly rather than their amplitudes: Itot, incoherent=I1+I2=2I1  ⟹  Itot, incoherentI1=2.00I_{\text{tot, incoherent}} = I_1 + I_2 = 2I_1 \implies \frac{I_{\text{tot, incoherent}}}{I_1} = 2.00 The resulting change in sound level is: Δβincoherent=(10 dB)log⁡10(2.00)≈(10 dB)(0.3010)=3.01 dB≈3.0 dB\Delta \beta_{\text{incoherent}} = (10\text{ dB})\log_{10}(2.00) \approx (10\text{ dB})(0.3010) = 3.01\text{ dB} \approx 3.0\text{ dB}
  2. Why Decibels Do Not Scale Linearly with Amplitude

    • Decibels (dB\text{dB}) quantify a logarithmic ratio of power or intensity, not a direct measure of wave amplitude.
    • Because I∝A2I \propto A^2, the sound level can be rewritten in terms of amplitude as: β=(10 dB)log⁡10(kA2I0)=(20 dB)log⁡10(AA0)\beta = (10\text{ dB})\log_{10}\left(\frac{k A^2}{I_0}\right) = (20\text{ dB})\log_{10}\left(\frac{A}{A_0}\right)
    • Therefore, doubling the amplitude (2×2\times) results in an increase of (20 dB)log⁡10(2)≈+6.02 dB(20\text{ dB})\log_{10}(2) \approx +6.02\text{ dB}, whereas doubling the intensity (2×2\times) results in (10 dB)log⁡10(2)≈+3.01 dB(10\text{ dB})\log_{10}(2) \approx +3.01\text{ dB}.

Common Pitfall: Confusing coherent and incoherent addition. Turning on a second identical source only doubles the intensity (+3 dB+3\text{ dB}) when the sources are independent and uncorrelated. When sources are coherent and in phase, the waves interfere constructively, multiplying the intensity by 44 (+6 dB+6\text{ dB}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats intensity as directly proportional to amplitude rather than amplitude squared, leading to an intensity ratio of 2 and an increase of 3.0 dB for coherent interference.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Itot, coherentI1=AtotA1=2\frac{I_{\text{tot, coherent}}}{I_1} = \frac{A_{\text{tot}}}{A_1} = 2

    Correct

    Itot, coherentI1=(AtotA1)2=22=4.00\frac{I_{\text{tot, coherent}}}{I_1} = \left(\frac{A_{\text{tot}}}{A_1}\right)^2 = 2^2 = 4.00

    Acoustic intensity is proportional to the square of the wave amplitude (I∝A2I \propto A^2). When two coherent waves interfere constructively with Atot=2A1A_{\text{tot}} = 2A_1, the resulting intensity increases by a factor of 22=42^2 = 4, not 22.

  2. Step 2

    Δβcoherent=10log⁡10(2)=3.0 dB\Delta \beta_{\text{coherent}} = 10\log_{10}(2) = 3.0\text{ dB}

    Correct

    Δβcoherent=(10 dB)log⁡10(4.00)≈6.02 dB≈6.0 dB\Delta \beta_{\text{coherent}} = (10\text{ dB})\log_{10}(4.00) \approx 6.02\text{ dB} \approx 6.0\text{ dB}

    Your decibel formula calculation followed logically from your intensity ratio of 22, but because the actual intensity quadrupled, the sound level increases by (10 dB)log⁡10(4)≈6.0 dB(10\text{ dB})\log_{10}(4) \approx 6.0\text{ dB}, matching the observed increase from 70.0 dB70.0\text{ dB} to 76.0 dB76.0\text{ dB}.

  3. Step 3

    Itot, incoherentI1=2  ⟹  Δβincoherent=10log⁡10(2)=3.0 dB\frac{I_{\text{tot, incoherent}}}{I_1} = 2 \implies \Delta \beta_{\text{incoherent}} = 10\log_{10}(2) = 3.0\text{ dB}

  4. Step 4

    Decibels depend logarithmically on intensity, so doubling intensity adds about 3 dB3\text{ dB} rather than doubling the decibel value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the decibel increase for incoherent sound sources adding in power.

You clearly explained that decibels represent a logarithmic scale rather than a linear one.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear amplitude-intensity misconception

You crossed out the factor of 20 in your initial decibel scratchwork and equated the intensity ratio directly to the amplitude ratio.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated sound intensity as directly proportional to amplitude (I∝AI \propto A) rather than proportional to the square of amplitude (I∝A2I \propto A^2), causing constructive interference of two equal waves to only double the intensity rather than quadruple it.

REASONING PATH
Your ACEpath teacher’s suggested approach
Amplitude vs. Intensity Relationship
  • Wave intensity is proportional to amplitude squared: I=kA2I = kA^2, so I2I1=(A2A1)2\frac{I_2}{I_1} = \left(\frac{A_2}{A_1}\right)^2.

  • Square the net amplitude ratio before calculating the intensity ratio and resulting decibel change.

Decibel Level from Amplitude
  • Because log⁡10(A2)=2log⁡10(A)\log_{10}(A^2) = 2\log_{10}(A), sound level in terms of amplitude is Δβ=(20 dB)log⁡10(A2A1)\Delta \beta = (20\text{ dB})\log_{10}\left(\frac{A_2}{A_1}\right).

  • Use a factor of 1010 when taking the log of an intensity ratio, but a factor of 2020 when taking the log of an amplitude ratio.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute Atot=2A1A_{\text{tot}} = 2A_1 into the quadratic intensity relation: Itot, coherentI1=(2A1A1)2=22=4.00\frac{I_{\text{tot, coherent}}}{I_1} = \left(\frac{2A_1}{A_1}\right)^2 = 2^2 = 4.00.

  2. Calculate the coherent sound level change: Δβcoherent=(10 dB)log⁡10(4.00)=(10 dB)(0.6021)≈6.02 dB≈6.0 dB\Delta \beta_{\text{coherent}} = (10\text{ dB})\log_{10}(4.00) = (10\text{ dB})(0.6021) \approx 6.02\text{ dB} \approx 6.0\text{ dB}.

  3. Verify against the experiment: βtot=β1+Δβcoherent=70.0 dB+6.0 dB=76.0 dB\beta_{\text{tot}} = \beta_1 + \Delta \beta_{\text{coherent}} = 70.0\text{ dB} + 6.0\text{ dB} = 76.0\text{ dB}, confirming constructive interference.

Final answer

(a) Itot, coherentI1=4.00\frac{I_{\text{tot, coherent}}}{I_1} = 4.00, yielding Δβcoherent=6.02 dB≈6.0 dB\Delta \beta_{\text{coherent}} = 6.02\text{ dB} \approx 6.0\text{ dB}; (b) Itot, incoherentI1=2.00\frac{I_{\text{tot, incoherent}}}{I_1} = 2.00, yielding Δβincoherent=3.01 dB≈3.0 dB\Delta \beta_{\text{incoherent}} = 3.01\text{ dB} \approx 3.0\text{ dB}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice expressing wave intensity as I∝A2I \propto A^2 in interference problems before evaluating ratios.

  • Remember that doubling intensity adds +3 dB+3\text{ dB}, whereas doubling amplitude adds +6 dB+6\text{ dB}.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the formula for decibels in terms of intensity (10 log₁₀) with the pressure/amplitude decibel formula (20 log₁₀), using 20 log₁₀ on the intensity ratio and doubling the resulting decibel values.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Itot, coherentI1=(2)2=4\frac{I_{\text{tot, coherent}}}{I_1} = (2)^2 = 4

  2. Step 2

    Δβcoherent=20log⁡10(4)=12.0 dB\Delta\beta_{\text{coherent}} = 20\log_{10}(4) = 12.0\text{ dB}

    Correct

    \Delta$$\beta{coherent\text{coherent}} = (10 dB\text{ dB})\log{10}(4) ≈\approx 6.02 dB\text{ dB} ≈\approx 6.0$\text{ dB}$$

    Sound intensity level in decibels is defined with a coefficient of 1010 when evaluating an intensity ratio: Δβ=(10 dB)log⁡10(I2/I1)\Delta\beta = (10\text{ dB})\log_{10}(I_2/I_1). The factor of 2020 applies only when taking the logarithm of an amplitude ratio, because (10 dB)log⁡10(A2/A02)=(20 dB)log⁡10(A/A0)(10\text{ dB})\log_{10}(A^2/A_0^2) = (20\text{ dB})\log_{10}(A/A_0).

  3. Step 3

    Itot, incoherentI1=2\frac{I_{\text{tot, incoherent}}}{I_1} = 2

  4. Step 4

    Δβincoherent=20log⁡10(2)=6.0 dB\Delta\beta_{\text{incoherent}} = 20\log_{10}(2) = 6.0\text{ dB}

    Correct

    \Delta$$\beta{incoherent\text{incoherent}} = (10 dB\text{ dB})\log{10}(2) ≈\approx 3.01 dB\text{ dB} ≈\approx 3.0$\text{ dB}$$

    Because 22 is an intensity ratio rather than an amplitude ratio, the formula requires (10 dB)log⁡10(2)≈3.0 dB(10\text{ dB})\log_{10}(2) \approx 3.0\text{ dB}.

  5. Step 5

    Decibels are defined logarithmically rather than linearly, so multiplying amplitude or intensity adds decibels instead of multiplying them.\text{Decibels are defined logarithmically rather than linearly, so multiplying amplitude or intensity adds decibels instead of multiplying them.}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the quadratic relationship I∝A2I \propto A^2 to find the coherent intensity ratio.

You correctly added intensities directly for incoherent sources.

You clearly explained why decibel levels scale logarithmically rather than linearly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Decibel formula coefficient confusion

You applied the amplitude multiplier of 20log⁡1020\log_{10} to an intensity ratio instead of using 10log⁡1010\log_{10}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the decibel formula for intensity ratios, β=10log⁡10(I/I0)\beta = 10\log_{10}(I/I_0), with the decibel formula written in terms of field or amplitude ratios, β=20log⁡10(A/A0)\beta = 20\log_{10}(A/A_0). Applying 20log⁡1020\log_{10} to an intensity ratio effectively squares the intensity inside the logarithm, doubling the true decibel change.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the quantity inside the logarithm
  • Use 10log⁡1010\log_{10} for power or intensity ratios; use 20log⁡1020\log_{10} for pressure or amplitude ratios.

  • Before writing the multiplier, verify whether your ratio is I2/I1I_2/I_1 (multiplier 1010) or A2/A1A_2/A_1 (multiplier 2020).

Validate against the $+3\text{ dB}$ rule of thumb
  • Doubling power or intensity (2×I2\times I) always corresponds to an increase of approximately +3.0 dB+3.0\text{ dB}.

  • Check whether doubling intensity produces +3 dB+3\text{ dB}. If your calculation gives +6 dB+6\text{ dB} for I2/I1=2I_2/I_1 = 2, you have mistakenly used the factor of 2020.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the standard sound level formula for intensity ratios: Δβcoherent=(10 dB)log⁡10(Itot, coherentI1)\Delta\beta_{\text{coherent}} = (10\text{ dB})\log_{10}\left(\frac{I_{\text{tot, coherent}}}{I_1}\right).

  2. Substitute Itot, coherentI1=4\frac{I_{\text{tot, coherent}}}{I_1} = 4: Δβcoherent=(10 dB)log⁡10(4)≈(10)(0.6021) dB≈6.0 dB\Delta\beta_{\text{coherent}} = (10\text{ dB})\log_{10}(4) \approx (10)(0.6021)\text{ dB} \approx 6.0\text{ dB}.

  3. For incoherent sources, substitute Itot, incoherentI1=2\frac{I_{\text{tot, incoherent}}}{I_1} = 2: Δβincoherent=(10 dB)log⁡10(2)≈(10)(0.3010) dB≈3.0 dB\Delta\beta_{\text{incoherent}} = (10\text{ dB})\log_{10}(2) \approx (10)(0.3010)\text{ dB} \approx 3.0\text{ dB}.

Final answer

(a) Itot, coherentI1=4.00\frac{I_{\text{tot, coherent}}}{I_1} = 4.00, Δβcoherent≈6.0 dB\Delta\beta_{\text{coherent}} \approx 6.0\text{ dB}; (b) Itot, incoherentI1=2.00\frac{I_{\text{tot, incoherent}}}{I_1} = 2.00, Δβincoherent≈3.0 dB\Delta\beta_{\text{incoherent}} \approx 3.0\text{ dB}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review when to use 10log⁡1010\log_{10} versus 20log⁡1020\log_{10} in acoustic calculations.

  • Practice computing sound intensity level changes from both pressure amplitude ratios and intensity ratios.

  • Memorize the two benchmark shifts: doubling intensity adds +3 dB+3\text{ dB}, while doubling amplitude adds +6 dB+6\text{ dB}.

OverviewACEpath Teacher's Diagnosis

03 The student erroneously multiplies the sound level directly by the intensity ratio instead of evaluating the logarithmic change.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Itot, coherent/I1=(2)2=4I_{\text{tot, coherent}} / I_1 = (2)^2 = 4

  2. Step 2

    Δβcoherent=4×70.0 dB=280.0 dB\Delta \beta_{\text{coherent}} = 4 \times 70.0\text{ dB} = 280.0\text{ dB}

    Correct

    Δβcoherent=(10 dB)log⁡10(Itot, coherentI1)=(10 dB)log⁡10(4)≈6.02 dB\Delta \beta_{\text{coherent}} = (10\text{ dB})\log_{10}\left(\frac{I_{\text{tot, coherent}}}{I_1}\right) = (10\text{ dB})\log_{10}(4) \approx 6.02\text{ dB}

    You multiplied the base decibel level directly by the intensity ratio. Because the decibel scale is logarithmic, an intensity ratio of 44 corresponds to an additive increase of Δβ=(10 dB)log⁡10(4)≈6.0 dB\Delta \beta = (10\text{ dB})\log_{10}(4) \approx 6.0\text{ dB}.

  3. Step 3

    Itot, incoherent/I1=2I_{\text{tot, incoherent}} / I_1 = 2

  4. Step 4

    Δβincoherent=2×70.0 dB=140.0 dB\Delta \beta_{\text{incoherent}} = 2 \times 70.0\text{ dB} = 140.0\text{ dB}

    Correct

    Δβincoherent=(10 dB)log⁡10(Itot, incoherentI1)=(10 dB)log⁡10(2)≈3.01 dB\Delta \beta_{\text{incoherent}} = (10\text{ dB})\log_{10}\left(\frac{I_{\text{tot, incoherent}}}{I_1}\right) = (10\text{ dB})\log_{10}(2) \approx 3.01\text{ dB}

    You multiplied the decibel level by 22 instead of applying the logarithmic definition Δβ=(10 dB)log⁡10(2)≈3.01 dB\Delta \beta = (10\text{ dB})\log_{10}(2) \approx 3.01\text{ dB}.

  5. Step 5

    Decibels do not scale linearly with amplitude because intensity is proportional to amplitude squared and decibels follow a logarithmic function.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated that doubling coherent wave amplitude quadruples the sound intensity.

You correctly recognized that incoherent sound sources add directly by intensity, doubling the intensity.

You provided a clear qualitative explanation for why sound level in decibels depends logarithmically on amplitude.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear scaling of decibels instead of logarithmic evaluation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the sound level β\beta as directly proportional to intensity II (multiplying β\beta by the factor Itot/I1I_{\text{tot}}/I_1) rather than recognizing that decibels are a logarithmic measure where an intensity factor produces an additive change Δβ=(10 dB)log⁡10(Iratio)\Delta \beta = (10\text{ dB})\log_{10}(I_{\text{ratio}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Decibel Difference Formula
  • Δβ=β2−β1=(10 dB)log⁡10(I2I1)\Delta \beta = \beta_2 - \beta_1 = (10\text{ dB})\log_{10}\left(\frac{I_2}{I_1}\right)

  • Always convert an intensity multiplier into an added decibel value by taking (10 dB)log⁡10(factor)(10\text{ dB})\log_{10}(\text{factor}), never by multiplying the decibel value itself.

Rule of Thumb for Doubling
  • Multiplying intensity by 22 adds ≈+3.0 dB\approx +3.0\text{ dB}; multiplying intensity by 44 adds ≈+6.0 dB\approx +6.0\text{ dB}.

  • Check whether your result exceeds realistic sound levels: multiplying 70 dB70\text{ dB} to get 140 dB140\text{ dB} or 280 dB280\text{ dB} would mean physical threshold-of-pain or shockwave levels from simply turning on a second identical speaker.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the logarithmic level change formula: Δβ=(10 dB)log⁡10(ItotI1)\Delta \beta = (10\text{ dB})\log_{10}\left(\frac{I_{\text{tot}}}{I_1}\right).

  2. For coherent addition with ratio 44: Δβcoherent=(10 dB)log⁡10(4)=(10 dB)(0.6021)≈6.02 dB\Delta \beta_{\text{coherent}} = (10\text{ dB})\log_{10}(4) = (10\text{ dB})(0.6021) \approx 6.02\text{ dB}.

  3. For incoherent addition with ratio 22: Δβincoherent=(10 dB)log⁡10(2)=(10 dB)(0.3010)≈3.01 dB\Delta \beta_{\text{incoherent}} = (10\text{ dB})\log_{10}(2) = (10\text{ dB})(0.3010) \approx 3.01\text{ dB}.

Final answer

(a) Itot, coherent/I1=4.00I_{\text{tot, coherent}}/I_1 = 4.00, Δβcoherent=6.02 dB≈6.0 dB\Delta \beta_{\text{coherent}} = 6.02\text{ dB} \approx 6.0\text{ dB}; (b) Itot, incoherent/I1=2.00I_{\text{tot, incoherent}}/I_1 = 2.00, Δβincoherent=3.01 dB≈3.0 dB\Delta \beta_{\text{incoherent}} = 3.01\text{ dB} \approx 3.0\text{ dB}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice computing sound level changes directly using Δβ=(10 dB)log⁡10(I2/I1)\Delta \beta = (10\text{ dB})\log_{10}(I_2/I_1) whenever intensity is scaled.

  • Memorize common decibel increments: a factor of 22 in intensity is +3 dB+3\text{ dB}, a factor of 44 is +6 dB+6\text{ dB}, and a factor of 1010 is +10 dB+10\text{ dB}.

Lock it in

Similar question

01

A sound wave has pressure amplitude A1A_1 and sound level 60.0 dB60.0\text{ dB}. If an amplifier increases the wave's pressure amplitude to 3A13A_1, what is the new sound level in decibels?

Answer

69.5 dB69.5\text{ dB}. Tripling the amplitude scales intensity by 32=93^2 = 9. The sound level increase is Δβ=(10 dB)log⁡10(9)=(20 dB)log⁡10(3)≈9.54 dB\Delta \beta = (10\text{ dB})\log_{10}(9) = (20\text{ dB})\log_{10}(3) \approx 9.54\text{ dB}. Thus, βnew=60.0 dB+9.54 dB≈69.5 dB\beta_{\text{new}} = 60.0\text{ dB} + 9.54\text{ dB} \approx 69.5\text{ dB}.

02

Two identical sound sources each produce 65.0 dB65.0\text{ dB} at a listener's position. Compare the total sound level if the sources are (a) mutually incoherent versus (b) completely coherent and in phase.

Answer

(a) Incoherent: 68.0 dB68.0\text{ dB}; (b) Coherent: 71.0 dB71.0\text{ dB}. Incoherent sources sum in intensity: Itot=2I1I_{\text{tot}} = 2I_1, so Δβ=10log⁡10(2)≈+3.0 dB\Delta \beta = 10\log_{10}(2) \approx +3.0\text{ dB} (68.0 dB68.0\text{ dB}). Coherent in-phase sources sum in amplitude: Atot=2A1A_{\text{tot}} = 2A_1, so Itot=(2)2I1=4I1I_{\text{tot}} = (2)^2 I_1 = 4I_1, giving Δβ=10log⁡10(4)≈+6.0 dB\Delta \beta = 10\log_{10}(4) \approx +6.0\text{ dB} (71.0 dB71.0\text{ dB}).

03

Four identical, mutually coherent loudspeakers are arranged so that their waves arrive at a microphone exactly in phase. By how many decibels does the sound level drop if two of the four speakers are switched off?

Answer

6.02 dB≈6.0 dB6.02\text{ dB} \approx 6.0\text{ dB}. With four in-phase speakers, A4=4A1A_4 = 4A_1 and I4∝(4A1)2=16A12I_4 \propto (4A_1)^2 = 16A_1^2. With two speakers, A2=2A1A_2 = 2A_1 and I2∝(2A1)2=4A12I_2 \propto (2A_1)^2 = 4A_1^2. The intensity ratio is I2/I4=4/16=1/4=0.25I_2 / I_4 = 4/16 = 1/4 = 0.25. The decrease in sound level is Δβ=(10 dB)log⁡10(0.25)≈−6.02 dB\Delta \beta = (10\text{ dB})\log_{10}(0.25) \approx -6.02\text{ dB}.

Loading workspace…