Resources

A capacitor with capacitance C=8.00 μFC = 8.00\text{ }\mu\text{F} is charged to an initial potential difference of V0=30.0 VV_0 = 30.0\text{ V} such that plate AA carries charge +Q0+Q_0 and plate BB carries −Q0-Q_0. At t=0 st = 0\text{ s}, this capacitor is connected in series with a resistor R=25.0 kΩR = 25.0\text{ }\text{k}\Omega and a second DC power supply E=10.0 V\mathcal{E} = 10.0\text{ V}, oriented such that the positive terminal of the power supply connects directly to plate AA. Choosing a clockwise loop orientation with current i(t)i(t) defined as positive in the direction leaving plate AA into the positive terminal of the battery: (a) Formulate the differential equation for qA(t)q_A(t) using Kirchhoff's loop rule, clearly showing signs. (b) Find the net current ii (magnitude and true physical direction) at t=0.150 st = 0.150\text{ s}.

Answer and steps

Final answer

(a) qAC−E+RdqAdt=0\frac{q_A}{C} - \mathcal{E} + R\frac{dq_A}{dt} = 0, where i=−dqAdt=qA/C−ERi = -\frac{dq_A}{dt} = \frac{q_A/C - \mathcal{E}}{R}; (b) i=3.79×10−4 Ai = 3.79 \times 10^{-4}\text{ A} (or 0.379 mA0.379\text{ mA}), directed physically counterclockwise (discharging plate AA into the opposing battery)

Steps

Part (a): Formulate the Differential Equation

  1. Understand the Circuit Elements and Loop Traversal:

    • A capacitor of capacitance CC initially stores charge Q0=CV0Q_0 = C V_0 on plate AA. The potential difference across the capacitor from plate BB to plate AA is VC=qA(t)CV_C = \frac{q_A(t)}{C}.
    • The capacitor is in series with a resistor RR and a DC source E\mathcal{E}.
    • The positive terminal of the battery connects directly to plate AA. Traversing the battery from its positive terminal to its negative terminal produces a potential drop of −E-\mathcal{E}.
    • Traversal continues through the resistor RR in the direction of the assigned current i(t)i(t), producing an Ohm's law potential drop of −i(t)R-i(t)R.
  2. Apply Kirchhoff's Voltage Law (Loop Rule): Traversing the closed loop starting from plate BB, passing through the capacitor to plate AA, through the battery, through the resistor, and back to plate BB: ΔVcapacitor+ΔVbattery+ΔVresistor=0\Delta V_{\text{capacitor}} + \Delta V_{\text{battery}} + \Delta V_{\text{resistor}} = 0 qA(t)C−E−i(t)R=0\frac{q_A(t)}{C} - \mathcal{E} - i(t)R = 0
  3. Relate Current to Capacitor Charge:

    • The current i(t)i(t) is defined as positive when leaving plate AA.
    • A positive current leaving plate AA depletes the charge on plate AA, which means: i(t)=−dqAdti(t) = -\frac{dq_A}{dt}
    • Substituting this into the loop equation: qAC−E−(−dqAdt)R=0  ⟹  qAC−E+RdqAdt=0\frac{q_A}{C} - \mathcal{E} - \left(-\frac{dq_A}{dt}\right)R = 0 \implies \frac{q_A}{C} - \mathcal{E} + R\frac{dq_A}{dt} = 0
    • Expressing i(t)i(t) in terms of the charge: i(t)=−dqAdt=qA(t)C−ERi(t) = -\frac{dq_A}{dt} = \frac{\frac{q_A(t)}{C} - \mathcal{E}}{R}

Part (b): Calculate the Current at t=0.150 st = 0.150\text{ s}

  1. Identify the Circuit Parameters:

    • Capacitance: C=8.00 μF=8.00×10−6 FC = 8.00\text{ }\mu\text{F} = 8.00 \times 10^{-6}\text{ F}
    • Resistance: R=25.0 kΩ=25.0×103 ΩR = 25.0\text{ k}\Omega = 25.0 \times 10^3\text{ }\Omega
    • Time constant: τ=RC=(25.0×103 Ω)(8.00×10−6 F)=0.200 s\tau = RC = (25.0 \times 10^3\text{ }\Omega)(8.00 \times 10^{-6}\text{ F}) = 0.200\text{ s}
    • Initial capacitor voltage: V0=30.0 VV_0 = 30.0\text{ V}
    • Battery EMF: E=10.0 V\mathcal{E} = 10.0\text{ V}
  2. Solve for the Time-Dependent Current:

    • The differential equation in terms of the voltage VC(t)=qA(t)CV_C(t) = \frac{q_A(t)}{C} is: RCdVCdt+VC=ERC \frac{dV_C}{dt} + V_C = \mathcal{E}
    • The general solution for VC(t)V_C(t) with initial condition VC(0)=V0V_C(0) = V_0 is: VC(t)=E+(V0−E)e−t/τV_C(t) = \mathcal{E} + (V_0 - \mathcal{E})e^{-t/\tau}
    • The current as a function of time is: i(t)=VC(t)−ER=V0−ERe−t/τi(t) = \frac{V_C(t) - \mathcal{E}}{R} = \frac{V_0 - \mathcal{E}}{R}e^{-t/\tau}
  3. Evaluate at t=0.150 st = 0.150\text{ s}:

    • Initial current magnitude: i(0)=30.0 V−10.0 V25.0×103 Ω=20.0 V25.0×103 Ω=8.00×10−4 A=0.800 mAi(0) = \frac{30.0\text{ V} - 10.0\text{ V}}{25.0 \times 10^3\text{ }\Omega} = \frac{20.0\text{ V}}{25.0 \times 10^3\text{ }\Omega} = 8.00 \times 10^{-4}\text{ A} = 0.800\text{ mA}
    • Exponential decay factor: tτ=0.150 s0.200 s=0.75\frac{t}{\tau} = \frac{0.150\text{ s}}{0.200\text{ s}} = 0.75 e−0.75≈0.4724e^{-0.75} \approx 0.4724
    • Net current: i(0.150 s)=(8.00×10−4 A)⋅e−0.75≈3.79×10−4 A(0.379 mA)i(0.150\text{ s}) = (8.00 \times 10^{-4}\text{ A}) \cdot e^{-0.75} \approx 3.79 \times 10^{-4}\text{ A}\quad (0.379\text{ mA})
  4. Determine the Physical Direction:

    • Since VC(t)>EV_C(t) > \mathcal{E} throughout this interval (30.0 V30.0\text{ V} decaying toward 10.0 V10.0\text{ V}), the capacitor voltage overcomes the opposing battery EMF.
    • Hence, charge continues to flow out of plate AA into the positive terminal of the opposing power supply, flowing physically counterclockwise around the circuit loop to discharge the capacitor toward its equilibrium state of 10.0 V10.0\text{ V}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student sets i = +dq_A/dt instead of i = -dq_A/dt because they forget that current leaving a plate decreases its charge, leading to an unstable exponentially growing charge or inverted signs.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    −E−iR+qAC=0-\mathcal{E} - iR + \frac{q_A}{C} = 0

  2. Step 2

    i=dqAdti = \frac{dq_A}{dt}

    Correct

    i=−dqAdti = -\frac{dq_A}{dt}

    Because the current i(t)i(t) is defined as leaving plate AA, a positive current drains charge from plate AA. Therefore, the rate of change of charge must be negative when current is positive: i=−dqAdti = -\frac{dq_A}{dt}.

  3. Step 3

    −E−R(dqAdt)+qAC=0  ⟹  R(dqAdt)−qAC=−E-\mathcal{E} - R\left(\frac{dq_A}{dt}\right) + \frac{q_A}{C} = 0 \implies R\left(\frac{dq_A}{dt}\right) - \frac{q_A}{C} = -\mathcal{E}

    Correct

    qAC−E+RdqAdt=0\frac{q_A}{C} - \mathcal{E} + R\frac{dq_A}{dt} = 0

    Substituting i=+dqAdti = +\frac{dq_A}{dt} propagated the sign error into the differential equation, giving an unstable positive eigenvalue +1/(RC)+1/(RC) rather than the physical decaying eigenvalue −1/(RC)-1/(RC).

  4. Step 4

    RC=(25.0×103)(8.00×10−6)=0.200 s  ⟹  qA(t)=CE+(qA(0)−CE)et/RC  ⟹  i(t)=dqAdt=0.800e5t mARC = (25.0 \times 10^3)(8.00 \times 10^{-6}) = 0.200\text{ s} \implies q_A(t) = C\mathcal{E} + (q_A(0) - C\mathcal{E})e^{t/RC} \implies i(t) = \frac{dq_A}{dt} = 0.800e^{5t}\text{ mA}

    Correct

    i(t)=V0−ERe−t/RC=0.800e−5t mAi(t) = \frac{V_0 - \mathcal{E}}{R}e^{-t/RC} = 0.800e^{-5t}\text{ mA}

    Your calculation of the time constant τ=RC=0.200 s\tau = RC = 0.200\text{ s} is accurate, but the sign error caused the current to grow exponentially over time rather than decay toward zero.

  5. Step 5

    i(0.150 s)=0.800e0.750 mA=1.69 mAi(0.150\text{ s}) = 0.800e^{0.750}\text{ mA} = 1.69\text{ mA}, Magnitude is 1.69 mA1.69\text{ mA}, directed clockwise

    Correct

    i(0.150 s)=0.800e−0.750 mA≈0.379 mAi(0.150\text{ s}) = 0.800e^{-0.750}\text{ mA} \approx 0.379\text{ mA}, physically counterclockwise (opposing the battery)

    Evaluating your growing exponential led to an overestimated current magnitude of 1.69 mA1.69\text{ mA}. With the correct decay factor e−0.75≈0.4724e^{-0.75} \approx 0.4724, the net current is approximately 0.379 mA0.379\text{ mA} (3.79×10−4 A3.79 \times 10^{-4}\text{ A}), flowing out of plate AA (counterclockwise).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly established Kirchhoff's loop equation for the series loop.

You accurately calculated the circuit time constant τ=RC=0.200 s\tau = RC = 0.200\text{ s}.

You computed the initial voltage differential and corresponding coefficient correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention error relating current to capacitor charge ($i = +\frac{dq}{dt}$ vs. $i = -\frac{dq}{dt}$)

You treated current leaving plate AA as increasing the charge on plate AA, using i=dqAdti = \frac{dq_A}{dt} instead of i=−dqAdti = -\frac{dq_A}{dt}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In circuit analysis, associating current with a capacitor requires defining whether current enters or leaves the referenced plate. When current leaves a plate, charge conservation dictates dqplate=−i dtdq_{\text{plate}} = -i\,dt, leading to i=−dqdti = -\frac{dq}{dt}. Missing this negative sign turns passive dissipative RC relaxation into runaway exponential growth.

REASONING PATH
Your ACEpath teacher’s suggested approach
Plate Charge Conservation
  • If positive current ii leaves plate kk, then dqkdt=−i\frac{dq_k}{dt} = -i. If positive current ii enters plate kk, then dqkdt=+i\frac{dq_k}{dt} = +i.

  • Always draw an arrow at the capacitor plate. If the current arrow points away from the plate, write i=−dqdti = -\frac{dq}{dt}.

Physical Reality Check (Stability)
  • Passive RCRC circuits containing constant DC sources must decay exponentially toward a steady state, exhibiting e−t/τe^{-t/\tau}, never e+t/τe^{+t/\tau}.

  • If your solution produces a positive exponent e+t/RCe^{+t/RC}, pause immediately and recheck your sign convention between ii and dqdt\frac{dq}{dt}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Since i(t)i(t) is directed away from plate AA, positive current removes charge from plate AA: i(t)=−dqAdti(t) = -\frac{dq_A}{dt}.

  2. Substitute i(t)=−dqAdti(t) = -\frac{dq_A}{dt} into the loop rule: −E−R(−dqAdt)+qAC=0  ⟹  RdqAdt+qAC=E-\mathcal{E} - R\left(-\frac{dq_A}{dt}\right) + \frac{q_A}{C} = 0 \implies R\frac{dq_A}{dt} + \frac{q_A}{C} = \mathcal{E}.

  3. Divide by RCRC to form the standard differential equation: dqAdt+qARC=ER\frac{dq_A}{dt} + \frac{q_A}{RC} = \frac{\mathcal{E}}{R}.

  4. Solve with initial charge qA(0)=CV0=(8.00 μF)(30.0 V)=240 μCq_A(0) = CV_0 = (8.00\ \mu\text{F})(30.0\text{ V}) = 240\ \mu\text{C}: qA(t)=CE+(qA(0)−CE)e−t/RC=80 μC+(160 μC)e−t/0.200 sq_A(t) = C\mathcal{E} + (q_A(0) - C\mathcal{E})e^{-t/RC} = 80\ \mu\text{C} + (160\ \mu\text{C})e^{-t/0.200\text{ s}}.

  5. Differentiate to find i(t)i(t): i(t)=−dqAdt=160 μC0.200 se−t/0.200 s=0.800e−5t mAi(t) = -\frac{dq_A}{dt} = \frac{160\ \mu\text{C}}{0.200\text{ s}}e^{-t/0.200\text{ s}} = 0.800e^{-5t}\text{ mA}.

  6. Substitute t=0.150 st = 0.150\text{ s}: i(0.150 s)=0.800e−0.75 mA≈0.379 mAi(0.150\text{ s}) = 0.800e^{-0.75}\text{ mA} \approx 0.379\text{ mA} (3.79×10−4 A3.79 \times 10^{-4}\text{ A}).

Final answer

Differential equation: qAC−E+RdqAdt=0\frac{q_A}{C} - \mathcal{E} + R\frac{dq_A}{dt} = 0; Current at t=0.150 st = 0.150\text{ s}: i=3.79×10−4 Ai = 3.79 \times 10^{-4}\text{ A} (0.379 mA0.379\text{ mA}), directed counterclockwise (leaving plate AA).

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the sign convention relating capacitor plate charge q(t)q(t) to branch current i(t)i(t) when current enters versus leaves a plate.

  • Perform a sanity check on transient RC solutions: confirm that transient terms decay (e−t/RCe^{-t/RC}) rather than explode (e+t/RCe^{+t/RC}).

  • Practice solving the three targeted follow-up problems below to reinforce consistent sign tracking in Kirchhoff's loop equations.

OverviewACEpath Teacher's Diagnosis

02 The student treats traversing the battery from positive to negative terminal as a potential gain +E rather than a potential drop -E.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    +E−iR+qAC=0  ⟹  i=−dqAdt  ⟹  E+R(dqAdt)+qAC=0  ⟹  R(dqAdt)+qAC=−E+E - iR + \frac{q_A}{C} = 0 \implies i = -\frac{dq_A}{dt} \implies E + R\left(\frac{dq_A}{dt}\right) + \frac{q_A}{C} = 0 \implies R\left(\frac{dq_A}{dt}\right) + \frac{q_A}{C} = -E

    Correct

    qAC−E−iR=0  ⟹  qAC−E+RdqAdt=0\frac{q_A}{C} - \mathcal{E} - iR = 0 \implies \frac{q_A}{C} - \mathcal{E} + R\frac{dq_A}{dt} = 0

    When traversing the loop clockwise, you move from plate AA into the positive terminal and exit out of the negative terminal of the battery. Moving from high potential to low potential across an EMF source is a potential drop of −E-\mathcal{E}, not a gain of +E+E.

  2. Step 2

    RC=(25.0×103 Ω)(8.00×10−6 F)=0.200 s  ⟹  qA(0)=(8.00 μF)(30.0 V)=240 μCRC = (25.0 \times 10^3\text{ }\Omega)(8.00 \times 10^{-6}\text{ F}) = 0.200\text{ s} \implies q_A(0) = (8.00\text{ }\mu\text{F})(30.0\text{ V}) = 240\text{ }\mu\text{C}

  3. Step 3

    qA(∞)=−CE=−80 μC  ⟹  qA(t)=−80+320e−t/0.200 μC  ⟹  i(t)=1.60e−t/0.200 mAq_A(\infty) = -CE = -80\text{ }\mu\text{C} \implies q_A(t) = -80 + 320e^{-t/0.200}\text{ }\mu\text{C} \implies i(t) = 1.60e^{-t/0.200}\text{ mA}

    Correct

    qA(∞)=+CE=+80 μC  ⟹  qA(t)=80+160e−t/0.200 μC  ⟹  i(t)=0.800e−t/0.200 mAq_A(\infty) = +C\mathcal{E} = +80\text{ }\mu\text{C} \implies q_A(t) = 80 + 160e^{-t/0.200}\text{ }\mu\text{C} \implies i(t) = 0.800e^{-t/0.200}\text{ mA}

    Because of the sign error in the differential equation, your steady-state charge and total charge swing were calculated with the battery inverted, doubling the initial current magnitude from 0.800 mA0.800\text{ mA} to 1.60 mA1.60\text{ mA}.

  4. Step 4

    i(0.150 s)=1.60×e−0.750 mA=0.756 mAi(0.150\text{ s}) = 1.60 \times e^{-0.750}\text{ mA} = 0.756\text{ mA}, directed clockwise

    Correct

    i(0.150 s)=0.800×e−0.750 mA≈0.379 mAi(0.150\text{ s}) = 0.800 \times e^{-0.750}\text{ mA} \approx 0.379\text{ mA} (3.79×10−4 A3.79 \times 10^{-4}\text{ A})

    Your evaluation correctly carried through your expression, but the numerical value was inflated due to the initial sign error in the loop equation.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related the depleting charge to the current using i(t)=−dqAdti(t) = -\frac{dq_A}{dt}.

You accurately computed the circuit time constant τ=RC=0.200 s\tau = RC = 0.200\text{ s}.

You correctly calculated the initial charge on the capacitor plate as qA(0)=240 μCq_A(0) = 240\text{ }\mu\text{C}.

You carried out the first-order differential equation solving and exponential evaluation with sound algebraic technique.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Kirchhoff Loop Rule Battery Sign Error

You assigned a positive sign +E+E to the battery term when writing Kirchhoff's loop equation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the battery as a potential source contributing +E+E in the loop equation without considering the direction of loop traversal across the battery terminals (from positive to negative terminal).

REASONING PATH
Your ACEpath teacher’s suggested approach
Battery Traversal Sign Rule
  • Traversing a DC source from its positive terminal (+)(+) to its negative terminal (−)(-) is a potential drop: ΔV=−E\Delta V = -\mathcal{E}. Traversing from (−)(-) to (+)(+) is a potential rise: ΔV=+E\Delta V = +\mathcal{E}.

  • Always draw an arrow indicating loop traversal direction across each element before writing signs in Kirchhoff's Voltage Law.

Terminal Voltage Opposition Check
  • When a charged capacitor's positive plate connects to a battery's positive terminal, their voltages oppose each other. The net initial loop voltage driving current through the resistor must be ∣V0−E∣|V_0 - \mathcal{E}|, not V0+EV_0 + \mathcal{E}.

  • Perform a quick sanity check at t=0t=0: verify that i(0)=V0−ER=30.0 V−10.0 V25.0 kΩ=0.800 mAi(0) = \frac{V_0 - \mathcal{E}}{R} = \frac{30.0\text{ V} - 10.0\text{ V}}{25.0\text{ k}\Omega} = 0.800\text{ mA}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Traverse the loop clockwise starting from plate BB: moving across the capacitor from plate BB to plate AA gives ΔVC=+qAC\Delta V_C = +\frac{q_A}{C}.

  2. Moving from the battery's positive terminal to its negative terminal gives ΔVbatt=−E\Delta V_{\text{batt}} = -\mathcal{E}.

  3. Moving through resistor RR along the assumed current direction gives ΔVR=−iR\Delta V_R = -iR.

  4. Set the sum of potential differences to zero: qAC−E−iR=0\frac{q_A}{C} - \mathcal{E} - iR = 0.

  5. Substitute i=−dqAdti = -\frac{dq_A}{dt} to obtain the differential equation: qAC−E+RdqAdt=0\frac{q_A}{C} - \mathcal{E} + R\frac{dq_A}{dt} = 0, or RdqAdt+qAC=ER\frac{dq_A}{dt} + \frac{q_A}{C} = \mathcal{E}.

  6. Find the steady-state charge: as t→∞t \to \infty, dqAdt=0  ⟹  qA(∞)=CE=(8.00 μF)(10.0 V)=+80.0 μC\frac{dq_A}{dt} = 0 \implies q_A(\infty) = C\mathcal{E} = (8.00\text{ }\mu\text{F})(10.0\text{ V}) = +80.0\text{ }\mu\text{C}.

  7. Write the full time-dependent charge: qA(t)=qA(∞)+[qA(0)−qA(∞)]e−t/τ=80.0+(240−80.0)e−t/0.200=80.0+160e−t/0.200 μCq_A(t) = q_A(\infty) + [q_A(0) - q_A(\infty)]e^{-t/\tau} = 80.0 + (240 - 80.0)e^{-t/0.200} = 80.0 + 160e^{-t/0.200}\text{ }\mu\text{C}.

  8. Differentiate to find current: i(t)=−dqAdt=160 μC0.200 se−t/0.200=0.800e−t/0.200 mAi(t) = -\frac{dq_A}{dt} = \frac{160\text{ }\mu\text{C}}{0.200\text{ s}}e^{-t/0.200} = 0.800e^{-t/0.200}\text{ mA}.

  9. Evaluate at t=0.150 st = 0.150\text{ s}: i(0.150 s)=0.800×e−0.150/0.200=0.800×e−0.75≈0.379 mA=3.79×10−4 Ai(0.150\text{ s}) = 0.800 \times e^{-0.150/0.200} = 0.800 \times e^{-0.75} \approx 0.379\text{ mA} = 3.79 \times 10^{-4}\text{ A}.

Final answer

(a) qAC−E+RdqAdt=0\frac{q_A}{C} - \mathcal{E} + R\frac{dq_A}{dt} = 0; (b) i=3.79×10−4 Ai = 3.79 \times 10^{-4}\text{ A} (0.379 mA0.379\text{ mA})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review Kirchhoff's loop rule sign conventions, specifically distinguishing between element traversal direction and assigned current direction.

  • Practice writing initial loop equations at t=0+t = 0^+ to verify whether series EMFs add or subtract before solving differential equations.

OverviewACEpath Teacher's Diagnosis

03 The student assumes the capacitor is uncharged at t = 0 by neglecting the given initial potential difference V_0 = 30.0 V.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    -E\mathcal{E} - iR + qAC\frac{q_A}{C} = 0   ⟹  \implies i = -dqAdt\frac{dq_A}{dt}   ⟹  \implies R(dqAdt)\left(\frac{dq_A}{dt}\right) + qAC\frac{q_A}{C} = E\mathcal{E}

  2. Step 2

    RC = 0.200 s\text{ s}   ⟹  \implies q_A(0) = 0

    Correct

    q_A(0) = C V_0 = (8.00\text{ }$$\mu$$\text{F})(30.0 V\text{ V}) = 240\text{ }$$\mu$$\text{C}

    You calculated the time constant τ=RC=0.200 s\tau = RC = 0.200\text{ s} correctly, but you set qA(0)=0q_A(0) = 0. The problem states that the capacitor is initially charged to V0=30.0 VV_0 = 30.0\text{ V}, so the initial condition must be qA(0)=CV0=240 μCq_A(0) = C V_0 = 240\text{ }\mu\text{C}.

  3. Step 3

    q_A(t) = CE\mathcal{E}(1 - e^{-t/RC})   ⟹  \implies i(t) = -dqAdt\frac{dq_A}{dt} = -(CERC)\left(\frac{C\mathcal{E}}{RC}\right)e^{-t/RC} = -(10.0 V25.0 kΩ)\left(\frac{10.0\text{ V}}{25.0\text{ k}\Omega}\right)e^{-t/0.200} = -0.400e^{-t/0.200} mA\text{ mA}

    Correct

    q_A(t) = CE\mathcal{E} + C(V_0 - E\mathcal{E})e^{-t/RC}   ⟹  \implies i(t) = V0−ER\frac{V_0 - \mathcal{E}}{R}e^{-t/RC} = 0.800e^{-t/0.200} mA\text{ mA}

    Because you assumed an uncharged initial state, you applied the standard charging formula qA(t)=CE(1−e−t/RC)q_A(t) = C\mathcal{E}(1 - e^{-t/RC}) instead of accounting for the initial potential difference V0=30.0 VV_0 = 30.0\text{ V}.

  4. Step 4

    i(0.150 s\text{ s}) = -0.400 ×\times e^{-0.750} mA\text{ mA} = -0.189 mA\text{ mA}   ⟹  \implies Magnitude is \text{Magnitude is } 0.189 mA, directed counterclockwise\text{ mA, directed counterclockwise}

    Correct

    i(0.150 s\text{ s}) = 0.800e^{-0.750} mA\text{ mA} ≈\approx 0.379 mA\text{ mA}  (physically counterclockwise)\text{ (physically counterclockwise)}

    Your mathematical steps for evaluating the exponential and interpreting the negative sign were carried out properly, but the numerical magnitude is incorrect due to the initial condition error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly formulated Kirchhoff's loop equation with proper signs for each circuit element.

You related current to charge depletion on plate AA using i=−dqAdti = -\frac{dq_A}{dt}.

You computed the circuit time constant τ=RC=0.200 s\tau = RC = 0.200\text{ s} accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Initial condition omitted

You used the standard uncharged-capacitor formula q(t)=CE(1−e−t/τ)q(t) = C\mathcal{E}(1 - e^{-t/\tau}) rather than the general solution with initial voltage V0V_0.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Defaulting to textbook formulas for an initially uncharged capacitor instead of setting up the general boundary condition q(0)=CV0q(0) = C V_0 for a pre-charged capacitor.

REASONING PATH
Your ACEpath teacher’s suggested approach
Initial Capacitor State
  • If a capacitor starts with an initial voltage V0V_0, its initial charge is q(0)=CV0q(0) = C V_0, which is non-zero.

  • Always write down q(0)q(0) and VC(0)V_C(0) explicitly before picking or solving a differential equation.

General First-Order RC Response
  • Any first-order RC circuit variable follows y(t)=y(∞)+[y(0)−y(∞)]e−t/τy(t) = y(\infty) + [y(0) - y(\infty)]e^{-t/\tau}.

  • Identify the initial value y(0)y(0) and the asymptotic steady-state value y(∞)y(\infty) to write the solution directly.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the initial condition using V0=30.0 VV_0 = 30.0\text{ V}: qA(0)=CV0=(8.00×10−6 F)(30.0 V)=240 μCq_A(0) = C V_0 = (8.00\times 10^{-6}\text{ F})(30.0\text{ V}) = 240\text{ }\mu\text{C}.

  2. Find the general solution to RdqAdt+qAC=ER\frac{dq_A}{dt} + \frac{q_A}{C} = \mathcal{E}: qA(t)=CE+[qA(0)−CE]e−t/RCq_A(t) = C\mathcal{E} + [q_A(0) - C\mathcal{E}]e^{-t/RC}.

  3. Differentiate to find the current i(t)=−dqAdt=qA(0)/C−ERe−t/RC=V0−ERe−t/RCi(t) = -\frac{dq_A}{dt} = \frac{q_A(0)/C - \mathcal{E}}{R}e^{-t/RC} = \frac{V_0 - \mathcal{E}}{R}e^{-t/RC}.

  4. Substitute the numerical values: i(t)=30.0 V−10.0 V25.0×103 Ωe−t/0.200 s=(0.800 mA)e−t/0.200 si(t) = \frac{30.0\text{ V} - 10.0\text{ V}}{25.0\times 10^3\text{ }\Omega}e^{-t/0.200\text{ s}} = (0.800\text{ mA})e^{-t/0.200\text{ s}}.

  5. Evaluate at t=0.150 st = 0.150\text{ s}: i(0.150 s)=(0.800 mA)e−0.75≈0.379 mAi(0.150\text{ s}) = (0.800\text{ mA})e^{-0.75} \approx 0.379\text{ mA}.

Final answer

i(0.150 s)≈0.379 mAi(0.150\text{ s}) \approx 0.379\text{ mA} (3.79×10−4 A3.79\times 10^{-4}\text{ A}), directed counterclockwise (leaving plate AA into the opposing DC supply).

NEXT STEPS
Final Takeaways from Your Teacher
  • Write VC(0)V_C(0) and q(0)q(0) at the very top of your scratchpad whenever a problem states that a capacitor is pre-charged.

  • Practice using the universal initial-final transient formula y(t)=y(∞)+[y(0)−y(∞)]e−t/τy(t) = y(\infty) + [y(0) - y(\infty)]e^{-t/\tau} for RC circuits to avoid memorizing separate charging and discharging formulas.

Lock it in

Similar question

01

A capacitor with capacitance C=5.0 μFC = 5.0\text{ }\mu\text{F} is charged to V0=20 VV_0 = 20\text{ V}. At t=0t = 0, it is discharged across a resistor R=10 kΩR = 10\text{ k}\Omega. If current i(t)i(t) is defined as positive leaving the positive plate AA, state the loop differential equation for qA(t)q_A(t) and find i(0.050 s)i(0.050\text{ s}).

Answer

RdqAdt+qAC=0R\frac{dq_A}{dt} + \frac{q_A}{C} = 0. With τ=RC=0.050 s\tau = RC = 0.050\text{ s} and i(0)=V0R=2.0 mAi(0) = \frac{V_0}{R} = 2.0\text{ mA}, the current is i(0.050 s)=2.0e−1 mA≈0.736 mAi(0.050\text{ s}) = 2.0 e^{-1}\text{ mA} \approx 0.736\text{ mA}.

02

A capacitor C=2.0 μFC = 2.0\text{ }\mu\text{F} with initial voltage V0=5.0 VV_0 = 5.0\text{ V} is connected in series with an opposing DC voltage source E=15.0 V\mathcal{E} = 15.0\text{ V} and a resistor R=50 kΩR = 50\text{ k}\Omega, such that the positive terminal of E\mathcal{E} connects to the positive plate of CC. Define current i(t)i(t) directed into the positive plate. Write the differential equation for q(t)q(t) and compute the initial current i(0)i(0).

Answer

Current enters the positive plate, so i=+dqdti = +\frac{dq}{dt}. Kirchhoff's loop rule gives E−iR−qC=0  ⟹  Rdqdt+qC=E\mathcal{E} - iR - \frac{q}{C} = 0 \implies R\frac{dq}{dt} + \frac{q}{C} = \mathcal{E}. The initial current is i(0)=E−V0R=15.0 V−5.0 V50 kΩ=0.20 mAi(0) = \frac{\mathcal{E} - V_0}{R} = \frac{15.0\text{ V} - 5.0\text{ V}}{50\text{ k}\Omega} = 0.20\text{ mA} flowing into the positive plate (charging the capacitor further).

03

Two capacitors C1=4.0 μFC_1 = 4.0\text{ }\mu\text{F} (initial charge Q1=120 μCQ_1 = 120\text{ }\mu\text{C}) and C2=6.0 μFC_2 = 6.0\text{ }\mu\text{F} (initially uncharged) are connected in series with a resistor R=100 kΩR = 100\text{ k}\Omega at t=0t = 0. Let i(t)i(t) be the loop current flowing out of the positive plate of C1C_1 into the positive plate of C2C_2. Formulate the differential equation for q1(t)q_1(t) and find the time constant τ\tau of the circuit.

Answer

Since i=−dq1dti = -\frac{dq_1}{dt} and charge conservation gives q2(t)=Q1−q1(t)q_2(t) = Q_1 - q_1(t), the loop rule q1C1−iR−q2C2=0\frac{q_1}{C_1} - iR - \frac{q_2}{C_2} = 0 yields Rdq1dt+(1C1+1C2)q1=Q1C2R\frac{dq_1}{dt} + \left(\frac{1}{C_1} + \frac{1}{C_2}\right)q_1 = \frac{Q_1}{C_2}. The equivalent series capacitance is Ceq=C1C2C1+C2=2.4 μFC_{\text{eq}} = \frac{C_1 C_2}{C_1 + C_2} = 2.4\text{ }\mu\text{F}, so the time constant is τ=RCeq=(100 kΩ)(2.4 μF)=0.24 s\tau = R C_{\text{eq}} = (100\text{ k}\Omega)(2.4\text{ }\mu\text{F}) = 0.24\text{ s}.

Loading workspace…