Resources

In a physics laboratory experiment on static equilibrium, students utilize a circular force table with three pulley clamps to balance a central ring over a centering pin. String 11 is clamped at θ1=0.0∘\theta_1 = 0.0^\circ and holds a suspended mass m1=0.250 kgm_1 = 0.250\text{ kg}. String 22 is clamped at θ2=110.0∘\theta_2 = 110.0^\circ and holds a suspended mass m2=0.320 kgm_2 = 0.320\text{ kg}. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, use the component method to calculate the net resultant force F⃗12=F⃗1+F⃗2\vec{F}_{12} = \vec{F}_1 + \vec{F}_2 exerted by the first two strings, and determine the required third mass m3m_3 and clamp angle θ3\theta_3 needed to establish complete static equilibrium (the equilibrant force F⃗3\vec{F}_3).

Answer and steps

Final answer

F⃗12=(1.378i^+2.947j^) N\vec{F}_{12} = (1.378\hat{i} + 2.947\hat{j})\text{ N}, requiring an equilibrant force F⃗3=(−1.378i^−2.947j^) N\vec{F}_3 = (-1.378\hat{i} - 2.947\hat{j})\text{ N} produced by mass m3=0.332 kgm_3 = 0.332\text{ kg} clamped at θ3=244.9∘\theta_3 = 244.9^\circ (or 64.9∘64.9^\circ south of west).

Steps

01

Calculate the Magnitudes of the Tensions

The tension in each string is equal to the gravitational force acting on the corresponding suspended mass, given by F=mgF = m g:

  • For string 11: F1=m1g=(0.250 kg)(9.80 m/s2)=2.450 NF_1 = m_1 g = (0.250\text{ kg})(9.80\text{ m/s}^2) = 2.450\text{ N}
  • For string 22: F2=m2g=(0.320 kg)(9.80 m/s2)=3.136 NF_2 = m_2 g = (0.320\text{ kg})(9.80\text{ m/s}^2) = 3.136\text{ N}

02

Resolve Each Force into Orthogonal Components

Using standard polar angles where the positive xx-axis is at 0.0∘0.0^\circ:

  • String 1 (θ1=0.0∘\theta_1 = 0.0^\circ): F1x=F1cos⁡(0.0∘)=2.450cos⁡(0.0∘)=2.450 NF_{1x} = F_1 \cos(0.0^\circ) = 2.450 \cos(0.0^\circ) = 2.450\text{ N} F1y=F1sin⁡(0.0∘)=2.450sin⁡(0.0∘)=0.000 NF_{1y} = F_1 \sin(0.0^\circ) = 2.450 \sin(0.0^\circ) = 0.000\text{ N}
  • String 2 (θ2=110.0∘\theta_2 = 110.0^\circ): F2x=F2cos⁡(110.0∘)=3.136cos⁡(110.0∘)≈3.136(−0.3420)=−1.0726 NF_{2x} = F_2 \cos(110.0^\circ) = 3.136 \cos(110.0^\circ) \approx 3.136(-0.3420) = -1.0726\text{ N} F2y=F2sin⁡(110.0∘)=3.136sin⁡(110.0∘)≈3.136(0.9397)=2.9469 NF_{2y} = F_2 \sin(110.0^\circ) = 3.136 \sin(110.0^\circ) \approx 3.136(0.9397) = 2.9469\text{ N}

03

Find the Resultant Force F⃗12\vec{F}_{12}

Add the corresponding xx- and yy-components:

F12,x=F1x+F2x=2.450 N+(−1.0726 N)≈1.378 NF_{12,x} = F_{1x} + F_{2x} = 2.450\text{ N} + (-1.0726\text{ N}) \approx 1.378\text{ N} F12,y=F1y+F2y=0.000 N+2.9469 N≈2.947 NF_{12,y} = F_{1y} + F_{2y} = 0.000\text{ N} + 2.9469\text{ N} \approx 2.947\text{ N}

In unit-vector notation: F⃗12=(1.378i^+2.947j^) N\vec{F}_{12} = (1.378\hat{i} + 2.947\hat{j})\text{ N}


04

Determine the Equilibrant Force F⃗3\vec{F}_3

For the ring to remain in static equilibrium over the center pin, the net force must be zero: F⃗1+F⃗2+F⃗3=0⃗  ⟹  F⃗3=−F⃗12\vec{F}_1 + \vec{F}_2 + \vec{F}_3 = \vec{0} \implies \vec{F}_3 = -\vec{F}_{12}

Therefore, the equilibrant force has equal magnitude and opposite direction to F⃗12\vec{F}_{12}: F⃗3=(−1.378i^−2.947j^) N\vec{F}_3 = (-1.378\hat{i} - 2.947\hat{j})\text{ N}


05

Find the Required Mass m3m_3 and Angle θ3\theta_3

  1. Magnitude of F⃗3\vec{F}_3: F3=(−1.3774)2+(−2.9469)2=1.8972+8.6841=10.5813≈3.253 NF_3 = \sqrt{(-1.3774)^2 + (-2.9469)^2} = \sqrt{1.8972 + 8.6841} = \sqrt{10.5813} \approx 3.253\text{ N}
  2. Required mass m3m_3: m3=F3g=3.253 N9.80 m/s2≈0.332 kgm_3 = \frac{F_3}{g} = \frac{3.253\text{ N}}{9.80\text{ m/s}^2} \approx 0.332\text{ kg}
  3. Clamp Angle θ3\theta_3: Because both F3xF_{3x} and F3yF_{3y} are negative, vector F⃗3\vec{F}_3 lies in the third quadrant.

    The reference angle with respect to the negative xx-axis (west) is: ϕ=arctan⁡(∣F3y∣∣F3x∣)=arctan⁡(2.94691.3774)=arctan⁡(2.1395)≈64.9∘\phi = \arctan\left(\frac{|F_{3y}|}{|F_{3x}|}\right) = \arctan\left(\frac{2.9469}{1.3774}\right) = \arctan(2.1395) \approx 64.9^\circ

    Measured in standard counterclockwise position from 0∘0^\circ: θ3=180∘+64.9∘=244.9∘\theta_3 = 180^\circ + 64.9^\circ = 244.9^\circ

Common Pitfall: When calculating θ=arctan⁡(Fy/Fx)\theta = \arctan(F_y/F_x), calculators return a principal angle in Quadrant I for two negative components. Always check the signs of the individual components to determine the correct quadrant before finding the standard clamp angle.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the equilibrant force with the resultant force, setting the clamp angle of the third string equal to the direction of the resultant instead of opposite to it.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    F1=0.250×9.80=2.45 N  ⟹  F2=0.320×9.80=3.136 NF_1 = 0.250 \times 9.80 = 2.45\text{ N} \implies F_2 = 0.320 \times 9.80 = 3.136\text{ N}

  2. Step 2

    F1x=2.45 N,  F1y=0 N  ⟹  F2x=3.136cos⁡(110∘)=−1.073 N,  F2y=3.136sin⁡(110∘)=2.947 N  ⟹  Fx=2.45−1.073=1.377 N,  Fy=0+2.947=2.947 NF_{1x} = 2.45\text{ N},\; F_{1y} = 0\text{ N} \implies F_{2x} = 3.136 \cos(110^\circ) = -1.073\text{ N},\; F_{2y} = 3.136 \sin(110^\circ) = 2.947\text{ N} \implies F_x = 2.45 - 1.073 = 1.377\text{ N},\; F_y = 0 + 2.947 = 2.947\text{ N}

  3. Step 3

    F12=1.3772+2.9472=3.25 N  ⟹  θ12=arctan⁡(2.947/1.377)=64.9∘F_{12} = \sqrt{1.377^2 + 2.947^2} = 3.25\text{ N} \implies \theta_{12} = \arctan(2.947 / 1.377) = 64.9^\circ

  4. Step 4

    F3=3.25 N  ⟹  m3=3.259.80=0.332 kgF_3 = 3.25\text{ N} \implies m_3 = \frac{3.25}{9.80} = 0.332\text{ kg}

  5. Step 5

    θ3=θ12=64.9∘\theta_3 = \theta_{12} = 64.9^\circ

    Correct

    θ3=θ12+180.0∘=64.9∘+180.0∘=244.9∘\theta_3 = \theta_{12} + 180.0^\circ = 64.9^\circ + 180.0^\circ = 244.9^\circ

    You set the clamp angle θ3\theta_3 equal to the direction of the resultant force F⃗12\vec{F}_{12}. For static equilibrium, the third force must balance the resultant (F⃗3=−F⃗12\vec{F}_3 = -\vec{F}_{12}), which requires it to point directly opposite at θ3=64.9∘+180∘=244.9∘\theta_3 = 64.9^\circ + 180^\circ = 244.9^\circ.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the tension force of each suspended mass using F=mgF = mg.

You correctly decomposed the forces into xx- and yy-components and summed them to find the resultant vector.

You determined the correct magnitude for both the resultant force and the required balancing mass m3m_3.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Resultant vs. Equilibrant Direction Confusion

You equated the angle of the equilibrant force F⃗3\vec{F}_3 directly to the angle of the resultant force F⃗12\vec{F}_{12}, forgetting that balancing forces must point in opposite directions.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the resultant force R⃗\vec{R} with the equilibrant force E⃗\vec{E}. While their magnitudes are equal (∣E⃗∣=∣R⃗∣|\vec{E}| = |\vec{R}|), static equilibrium demands R⃗+E⃗=0⃗\vec{R} + \vec{E} = \vec{0}, meaning E⃗=−R⃗\vec{E} = -\vec{R}. In standard angular coordinates, reversing a vector's direction requires adding or subtracting 180∘180^\circ.

REASONING PATH
Your ACEpath teacher’s suggested approach
Equilibrant Vector Definition
  • For complete static equilibrium, ∑F⃗=F⃗net+F⃗equilibrant=0⃗  ⟹  F⃗equilibrant=−F⃗net\sum \vec{F} = \vec{F}_{\text{net}} + \vec{F}_{\text{equilibrant}} = \vec{0} \implies \vec{F}_{\text{equilibrant}} = -\vec{F}_{\text{net}}.

  • Always verify that your equilibrant vector has components with signs flipped relative to the resultant: F3x=−F12,xF_{3x} = -F_{12,x} and F3y=−F12,yF_{3y} = -F_{12,y}.

Angular Direction of Opposite Vectors
  • A vector pointing in the opposite direction lies 180∘180^\circ away on a circular coordinate system: θequilibrant=θresultant±180∘\theta_{\text{equilibrant}} = \theta_{\text{resultant}} \pm 180^\circ.

  • Plot the resultant quadrant first. If F⃗12\vec{F}_{12} is in Quadrant I (64.9∘64.9^\circ), the equilibrant F⃗3\vec{F}_3 must lie in Quadrant III (64.9∘+180∘=244.9∘64.9^\circ + 180^\circ = 244.9^\circ).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the equilibrium condition: F⃗3=−F⃗12=(−1.378i^−2.947j^) N\vec{F}_3 = -\vec{F}_{12} = (-1.378\hat{i} - 2.947\hat{j})\text{ N}.

  2. Identify the quadrant: because both components of F⃗3\vec{F}_3 are negative, F⃗3\vec{F}_3 lies in Quadrant III.

  3. Add 180.0∘180.0^\circ to the resultant angle: θ3=64.9∘+180.0∘=244.9∘\theta_3 = 64.9^\circ + 180.0^\circ = 244.9^\circ.

Final answer

F⃗12=(1.378i^+2.947j^) N\vec{F}_{12} = (1.378\hat{i} + 2.947\hat{j})\text{ N}, m3=0.332 kgm_3 = 0.332\text{ kg}, θ3=244.9∘\theta_3 = 244.9^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch the forces on a unit circle or force table diagram before writing down the final clamp angle to confirm the equilibrant points directly opposite the resultant.

  • Check that the vector sum F⃗12+F⃗3\vec{F}_{12} + \vec{F}_3 equals zero by adding their components.

OverviewACEpath Teacher's Diagnosis

02 The student swaps the sine and cosine components when resolving F2, leading to incorrect net components, resultant force, and equilibrant values.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    F1=0.250×9.80=2.45 N  ⟹  F2=0.320×9.80=3.136 NF_1 = 0.250 \times 9.80 = 2.45\text{ N} \implies F_2 = 0.320 \times 9.80 = 3.136\text{ N}

  2. Step 2

    F1x=2.45 N,F1y=0 NF_{1x} = 2.45\text{ N},\quad F_{1y} = 0\text{ N}

  3. Step 3

    F2x=3.136×sin⁡(110∘)=2.947 N  ⟹  F2y=3.136×cos⁡(110∘)=−1.073 NF_{2x} = 3.136 \times \sin(110^\circ) = 2.947\text{ N} \implies F_{2y} = 3.136 \times \cos(110^\circ) = -1.073\text{ N}

    Correct

    F2x=3.136cos⁡(110.0∘)≈−1.073 NF_{2x} = 3.136\cos(110.0^\circ) \approx -1.073\text{ N}, F2y=3.136sin⁡(110.0∘)≈2.947 NF_{2y} = 3.136\sin(110.0^\circ) \approx 2.947\text{ N}

    You swapped the trigonometric functions for the Cartesian components. When the angle θ\theta is measured counterclockwise from the positive xx-axis, the horizontal component is Fcos⁡(θ)F\cos(\theta) and the vertical component is Fsin⁡(θ)F\sin(\theta).

  4. Step 4

    Fx=2.45+2.947=5.397 N  ⟹  Fy=0−1.073=−1.073 NF_x = 2.45 + 2.947 = 5.397\text{ N} \implies F_y = 0 - 1.073 = -1.073\text{ N}

    Correct

    F12,x=2.450+(−1.073)=1.378 NF_{12,x} = 2.450 + (-1.073) = 1.378\text{ N}, F12,y=0.000+2.947=2.947 NF_{12,y} = 0.000 + 2.947 = 2.947\text{ N}

    You added your component values algebraically, but this step is affected by the swapped components in Step 3.

  5. Step 5

    F12=5.3972+(−1.073)2=5.50 N  ⟹  θ12=arctan⁡(−1.073/5.397)=−11.2∘F_{12} = \sqrt{5.397^2 + (-1.073)^2} = 5.50\text{ N} \implies \theta_{12} = \arctan(-1.073 / 5.397) = -11.2^\circ

    Correct

    F12=1.3782+2.9472≈3.253 NF_{12} = \sqrt{1.378^2 + 2.947^2} \approx 3.253\text{ N}, θ12=arctan⁡(2.947/1.378)≈64.9∘\theta_{12} = \arctan(2.947 / 1.378) \approx 64.9^\circ

    Your formulas for magnitude and direction are algebraically appropriate, but the numerical values carry over the earlier component error.

  6. Step 6

    F3=5.50 N  ⟹  θ3=−11.2∘+180∘=168.8∘  ⟹  m3=5.509.80=0.561 kgF_3 = 5.50\text{ N} \implies \theta_3 = -11.2^\circ + 180^\circ = 168.8^\circ \implies m_3 = \frac{5.50}{9.80} = 0.561\text{ kg}

    Correct

    F3=3.253 NF_3 = 3.253\text{ N}, m3=3.2539.80≈0.332 kgm_3 = \frac{3.253}{9.80} \approx 0.332\text{ kg}, θ3=180∘+64.9∘=244.9∘\theta_3 = 180^\circ + 64.9^\circ = 244.9^\circ

    Your equilibrium logic (F3=F12F_3 = F_{12}, θ3=θ12+180∘\theta_3 = \theta_{12} + 180^\circ, and m3=F3/gm_3 = F_3/g) is correct, but downstream numbers are incorrect due to the swapped components.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the tension magnitudes from the suspended masses using F=mgF = mg.

You accurately identified that the equilibrant vector is equal in magnitude and directly opposite in direction to the resultant force vector.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Component Inversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assigned the sine function to the horizontal (xx) component and cosine to the vertical (yy) component when measuring an angle from the standard positive xx-axis.

REASONING PATH
Your ACEpath teacher’s suggested approach
Standard Angle Component Rule
  • For any vector with magnitude FF at standard angle θ\theta (counterclockwise from +x+x), Fx=Fcos⁡(θ)F_x = F\cos(\theta) and Fy=Fsin⁡(θ)F_y = F\sin(\theta).

  • Associate the horizontal coordinate (xx) with cosine and the vertical coordinate (yy) with sine whenever the angle is referenced to the xx-axis.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Resolve F⃗2\vec{F}_2 using standard trigonometry: F2x=3.136cos⁡(110.0∘)=−1.073 NF_{2x} = 3.136\cos(110.0^\circ) = -1.073\text{ N} and F2y=3.136sin⁡(110.0∘)=2.947 NF_{2y} = 3.136\sin(110.0^\circ) = 2.947\text{ N}.

  2. Compute net components: F12,x=2.450+(−1.073)=1.377 NF_{12,x} = 2.450 + (-1.073) = 1.377\text{ N} and F12,y=0+2.947=2.947 NF_{12,y} = 0 + 2.947 = 2.947\text{ N}.

  3. Calculate equilibrant magnitude and mass: F3=(−1.377)2+(−2.947)2=3.253 NF_3 = \sqrt{(-1.377)^2 + (-2.947)^2} = 3.253\text{ N}, so m3=3.253 N9.80 m/s2≈0.332 kgm_3 = \frac{3.253\text{ N}}{9.80\text{ m/s}^2} \approx 0.332\text{ kg}.

  4. Determine equilibrant direction: since both F3xF_{3x} and F3yF_{3y} are negative, θ3=180∘+arctan⁡(2.9471.377)=180∘+64.9∘=244.9∘\theta_3 = 180^\circ + \arctan\left(\frac{2.947}{1.377}\right) = 180^\circ + 64.9^\circ = 244.9^\circ.

Final answer

F⃗12=(1.378i^+2.947j^) N\vec{F}_{12} = (1.378\hat{i} + 2.947\hat{j})\text{ N}, m3=0.332 kgm_3 = 0.332\text{ kg}, θ3=244.9∘\theta_3 = 244.9^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a right triangle for any vector off the axes, explicitly labeling adjacent side as xx and opposite side as yy relative to the xx-axis.

  • Check that an angle in Quadrant II (90∘<θ<180∘90^\circ < \theta < 180^\circ) yields a negative xx-component ( cos⁡θ<0\,\cos\theta < 0) and a positive yy-component ( sin⁡θ>0\,\sin\theta > 0).

OverviewACEpath Teacher's Diagnosis

03 The student uses suspended mass directly as force magnitude without multiplying by the acceleration due to gravity g.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    F1=0.250 N  ⟹  F2=0.320 NF_1 = 0.250\text{ N} \implies F_2 = 0.320\text{ N}

    Correct

    F1=m1g=(0.250 kg)(9.80 m/s2)=2.450 N  ⟹  F2=m2g=(0.320 kg)(9.80 m/s2)=3.136 NF_1 = m_1 g = (0.250\text{ kg})(9.80\text{ m/s}^2) = 2.450\text{ N} \implies F_2 = m_2 g = (0.320\text{ kg})(9.80\text{ m/s}^2) = 3.136\text{ N}

    You treated the suspended mass values directly as forces in newtons. The tension in each suspended string is equal to the weight of the mass, F=mgF = mg, so each mass must be multiplied by g=9.80 m/s2g = 9.80\text{ m/s}^2.

  2. Step 2

    F1x=0.250 N, F1y=0 N  ⟹  F2x=0.320cos⁡(110∘)=−0.109 N  ⟹  F2y=0.320sin⁡(110∘)=0.301 NF_{1x} = 0.250\text{ N},\, F_{1y} = 0\text{ N} \implies F_{2x} = 0.320 \cos(110^\circ) = -0.109\text{ N} \implies F_{2y} = 0.320 \sin(110^\circ) = 0.301\text{ N}

    Correct

    F1x=2.450 N, F1y=0.000 N  ⟹  F2x=3.136cos⁡(110∘)≈−1.073 N  ⟹  F2y=3.136sin⁡(110∘)≈2.947 NF_{1x} = 2.450\text{ N},\, F_{1y} = 0.000\text{ N} \implies F_{2x} = 3.136 \cos(110^\circ) \approx -1.073\text{ N} \implies F_{2y} = 3.136 \sin(110^\circ) \approx 2.947\text{ N}

    Your trigonometric breakdown into orthogonal components is conceptually correct, but the numerical values are scaled down by a factor of gg because of the initial force assignment.

  3. Step 3

    Fx=0.250−0.109=0.141 N  ⟹  Fy=0+0.301=0.301 N  ⟹  F12=0.1412+0.3012=0.332 N  ⟹  θ12=arctan⁡(0.3010.141)=64.9∘F_x = 0.250 - 0.109 = 0.141\text{ N} \implies F_y = 0 + 0.301 = 0.301\text{ N} \implies F_{12} = \sqrt{0.141^2 + 0.301^2} = 0.332\text{ N} \implies \theta_{12} = \arctan\left(\frac{0.301}{0.141}\right) = 64.9^\circ

    Correct

    F12,x=2.450−1.073=1.378 N  ⟹  F12,y=0+2.947=2.947 N  ⟹  F⃗12=(1.378i^+2.947j^) NF_{12,x} = 2.450 - 1.073 = 1.378\text{ N} \implies F_{12,y} = 0 + 2.947 = 2.947\text{ N} \implies \vec{F}_{12} = (1.378\hat{i} + 2.947\hat{j})\text{ N}

    You added components and applied the Pythagorean theorem and tangent inverse properly. Notice that your angle θ12=64.9∘\theta_{12} = 64.9^\circ is correct because the missing factor of gg cancels out in the ratio Fy/FxF_y / F_x, but the force components and resultant magnitude remain too small by a factor of gg.

  4. Step 4

    F3=0.332 N  ⟹  θ3=64.9∘+180∘=244.9∘  ⟹  m3=0.3329.80=0.0339 kgF_3 = 0.332\text{ N} \implies \theta_3 = 64.9^\circ + 180^\circ = 244.9^\circ \implies m_3 = \frac{0.332}{9.80} = 0.0339\text{ kg}

    Correct

    F⃗3=−F⃗12=(−1.378i^−2.947j^) N  ⟹  θ3=244.9∘  ⟹  m3=F3g=3.253 N9.80 m/s2≈0.332 kg\vec{F}_3 = -\vec{F}_{12} = (-1.378\hat{i} - 2.947\hat{j})\text{ N} \implies \theta_3 = 244.9^\circ \implies m_3 = \frac{F_3}{g} = \frac{3.253\text{ N}}{9.80\text{ m/s}^2} \approx 0.332\text{ kg}

    You correctly recognized that the equilibrant points opposite to the resultant at θ3=θ12+180∘=244.9∘\theta_3 = \theta_{12} + 180^\circ = 244.9^\circ. However, because you divided your already-unscaled force value by gg, you divided by gg twice in total, resulting in m3=0.0339 kgm_3 = 0.0339\text{ kg} instead of 0.332 kg0.332\text{ kg}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up orthogonal components using cosine for the horizontal component and sine for the vertical component.

You correctly added vector components algebraically to find the net components.

You successfully found the equilibrant direction by adding 180∘180^\circ to the resultant direction.

You correctly recognized that mass is related to force through m=F/gm = F / g.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Mass-Weight Equivalence Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused mass (mm, in kilograms) with gravitational weight force (Fg=mgF_g = mg, in newtons) at the beginning of the problem, writing F=mF = m rather than F=mgF = mg.

REASONING PATH
Your ACEpath teacher’s suggested approach
Force Table String Tension
  • Suspended masses on a force table exert a downward gravitational force that produces tension in the string: T=Fg=mgT = F_g = mg, where g=9.80 m/s2g = 9.80\text{ m/s}^2.

  • Always convert suspended mass in kilograms into tension in newtons by multiplying by gg before resolving vectors into components.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate string tension magnitudes using F=mgF = mg: F1=(0.250)(9.80)=2.450 NF_1 = (0.250)(9.80) = 2.450\text{ N} and F2=(0.320)(9.80)=3.136 NF_2 = (0.320)(9.80) = 3.136\text{ N}.

  2. Resolve into components: F1x=2.450 NF_{1x} = 2.450\text{ N}, F1y=0.000 NF_{1y} = 0.000\text{ N}, F2x=3.136cos⁡(110.0∘)=−1.073 NF_{2x} = 3.136\cos(110.0^\circ) = -1.073\text{ N}, and F2y=3.136sin⁡(110.0∘)=2.947 NF_{2y} = 3.136\sin(110.0^\circ) = 2.947\text{ N}.

  3. Sum components: F12,x=1.378 NF_{12,x} = 1.378\text{ N} and F12,y=2.947 NF_{12,y} = 2.947\text{ N}, yielding F⃗12=(1.378i^+2.947j^) N\vec{F}_{12} = (1.378\hat{i} + 2.947\hat{j})\text{ N}.

  4. Find the equilibrant force: F⃗3=−F⃗12=(−1.378i^−2.947j^) N\vec{F}_3 = -\vec{F}_{12} = (-1.378\hat{i} - 2.947\hat{j})\text{ N} with magnitude F3=(−1.378)2+(−2.947)2=3.253 NF_3 = \sqrt{(-1.378)^2 + (-2.947)^2} = 3.253\text{ N}.

  5. Calculate the required mass and clamp angle: m3=3.253 N9.80 m/s2=0.332 kgm_3 = \frac{3.253\text{ N}}{9.80\text{ m/s}^2} = 0.332\text{ kg} at clamp angle θ3=180∘+64.9∘=244.9∘\theta_3 = 180^\circ + 64.9^\circ = 244.9^\circ.

Final answer

F⃗12=(1.378i^+2.947j^) N\vec{F}_{12} = (1.378\hat{i} + 2.947\hat{j})\text{ N}, requiring an equilibrant force F⃗3=(−1.378i^−2.947j^) N\vec{F}_3 = (-1.378\hat{i} - 2.947\hat{j})\text{ N} produced by mass m3=0.332 kgm_3 = 0.332\text{ kg} clamped at θ3=244.9∘\theta_3 = 244.9^\circ.

NEXT STEPS
Final Takeaways from Your Teacher
  • Check your units before beginning vector math: ensure quantities representing force have units of newtons (N\text{N}), not kilograms (kg\text{kg}).

  • When working with hanging masses, write T=mgT = mg explicitly as your first line of calculation.

  • Practice multi-string force table problems to reinforce converting hanging mass to tension force before component resolution.

Lock it in

Similar question

01

Two horizontal ropes pull on a ring with forces F⃗A=12.0 N\vec{F}_A = 12.0\text{ N} along the positive xx-axis (0∘0^\circ) and F⃗B=16.0 N\vec{F}_B = 16.0\text{ N} along the positive yy-axis (90∘90^\circ). Determine the magnitude and standard clamp angle θC\theta_C of the equilibrant force F⃗C\vec{F}_C needed to keep the ring stationary.

Answer

Magnitude: FC=12.02+16.02=20.0 NF_C = \sqrt{12.0^2 + 16.0^2} = 20.0\text{ N}. Resultant direction: θR=arctan⁡(16.0/12.0)≈53.1∘\theta_R = \arctan(16.0/12.0) \approx 53.1^\circ. Equilibrant direction: θC=53.1∘+180.0∘=233.1∘\theta_C = 53.1^\circ + 180.0^\circ = 233.1^\circ.

02

On a circular force table, string 11 exerts a force of 4.00 N4.00\text{ N} at 150.0∘150.0^\circ and string 22 exerts 5.00 N5.00\text{ N} at 220.0∘220.0^\circ. Using components, find the required equilibrant force vector F⃗3\vec{F}_3 in unit-vector notation and its standard position angle θ3\theta_3.

Answer

Resultant components: Rx=4.00cos⁡(150∘)+5.00cos⁡(220∘)=−3.464−3.830=−7.294 NR_x = 4.00\cos(150^\circ) + 5.00\cos(220^\circ) = -3.464 - 3.830 = -7.294\text{ N}; Ry=4.00sin⁡(150∘)+5.00sin⁡(220∘)=2.000−3.214=−1.214 NR_y = 4.00\sin(150^\circ) + 5.00\sin(220^\circ) = 2.000 - 3.214 = -1.214\text{ N}. Equilibrant: F⃗3=−R⃗=(7.29i^+1.21j^) N\vec{F}_3 = -\vec{R} = (7.29\hat{i} + 1.21\hat{j})\text{ N}. Direction: since both components of F⃗3\vec{F}_3 are positive, θ3=arctan⁡(1.214/7.294)≈9.5∘\theta_3 = \arctan(1.214/7.294) \approx 9.5^\circ.

03

A suspended traffic light of mass M=15.0 kgM = 15.0\text{ kg} is held in static equilibrium by two cables. Cable 11 pulls up and to the left at an angle of 35.0∘35.0^\circ above the negative xx-axis, while Cable 22 pulls up and to the right at an angle of 55.0∘55.0^\circ above the positive xx-axis. Show how the downward gravitational force acts as the equilibrant to the resultant of the two cable tensions, and determine the tension in Cable 11.

Answer

For equilibrium, T⃗1+T⃗2+F⃗g=0⃗\vec{T}_1 + \vec{T}_2 + \vec{F}_g = \vec{0}, so F⃗g=−(T⃗1+T⃗2)\vec{F}_g = -(\vec{T}_1 + \vec{T}_2), meaning gravity (147 N147\text{ N} downward at 270∘270^\circ) is the equilibrant of the two tensions whose resultant is 147 N147\text{ N} straight upward (90∘90^\circ). Setting ∑Fx=−T1cos⁡(35∘)+T2cos⁡(55∘)=0  ⟹  T2=T1cos⁡(35∘)cos⁡(55∘)\sum F_x = -T_1\cos(35^\circ) + T_2\cos(55^\circ) = 0 \implies T_2 = T_1\frac{\cos(35^\circ)}{\cos(55^\circ)}. Substituting into ∑Fy=T1sin⁡(35∘)+T2sin⁡(55∘)=Mg\sum F_y = T_1\sin(35^\circ) + T_2\sin(55^\circ) = Mg: T1(sin⁡(35∘)+cos⁡(35∘)sin⁡(55∘)cos⁡(55∘))=147 N  ⟹  T1=147sin⁡(35∘)=84.3 NT_1\left(\sin(35^\circ) + \frac{\cos(35^\circ)\sin(55^\circ)}{\cos(55^\circ)}\right) = 147\text{ N} \implies T_1 = 147\sin(35^\circ) = 84.3\text{ N}.

Loading workspace…