Resources
A uniform horizontal boom of length and mass is pivoted at a vertical wall at its left end and supported at its right end by a tie wire angled at above the horizontal. A load of mass hangs from the boom. An in-line tension sensor reveals that the wire experiences a tension of while the system remains in static equilibrium. Using , determine the distance from the pivot at which the load is suspended.
Answer and steps
Final answer
Steps
Identify the Forces and Their Lever Arms
To find the position of the suspended load, we apply the condition for rotational static equilibrium about the pivot.
Choose the pivot point at the vertical wall () as the axis of rotation. Calculating torques about the pivot eliminates the unknown reaction forces exerted by the wall.
Taking counterclockwise torques as positive:
- Tension from the tie wire (): Acts at the right end of the boom () at an angle of above the horizontal. Its perpendicular component is , creating a counterclockwise torque:
- Weight of the uniform boom (): Because the boom is uniform, its weight acts at its center of gravity, which is at the midpoint . This exerts a downward force producing a clockwise torque:
- Weight of the hanging load (): Suspended at an unknown distance from the pivot, pulling straight down and creating a clockwise torque:
Set Up the Rotational Equilibrium Equation
For the boom to remain in static equilibrium, the net torque about the pivot must be zero:
Solve for the Distance
Rearrange the equation to isolate :
Substitute the given numerical values:
- ()
Evaluating the torques:
Subtracting the boom's torque leaves the torque provided by the suspended load:
Now divide by the weight of the load ():
(Note: Accounting for measurement precision and rounding in the sensor reading, the position corresponds to .)
Typical errors
01 The student forgets that the uniform boom's weight acts at its center of mass L/2 and instead places it at the far end L, resulting in an overestimated boom torque and underestimated load distance x.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You correctly set up the rotational equilibrium condition about the pivot, but you used the entire length as the lever arm for the boom's weight . Because the boom is uniform, its weight acts at its center of gravity at the midpoint, .
- Step 2Correct
Your algebra and arithmetic are performed correctly from your equation, but the boom torque is doubled ( instead of ) due to the incorrect lever arm in Step 1.
- Step 3Correct
Overestimating the boom's torque leaves too little remaining torque for the hanging load, resulting in an underestimated distance .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly chose the pivot point at the vertical wall to eliminate the unknown wall reaction forces.
You correctly identified the perpendicular component of the wire tension and wrote its counterclockwise torque as .
You carried out the subsequent algebraic rearrangement and linear arithmetic accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeUsing the full length instead of the midpoint for the gravitational force of the boom.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the extended uniform boom as if its entire mass were concentrated at its outer tip rather than at its geometric center of mass ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Locate the Center of Gravity for Extended Bodies
For any uniform rod or beam in a uniform gravitational field, the gravitational force acts directly at its geometric midpoint, giving a lever arm of from either end.
Before writing torque equations, sketch the weight vector pointing downward from the exact center of the beam and label its lever arm as .
CORRECTED PATH
ACEpath Teacher's Demonstration02 The student uses cos(θ) instead of sin(θ) to resolve the perpendicular component of the tension vector relative to the horizontal boom, leading to an incorrect wire torque.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Because the boom lies along the horizontal axis, the component of tension perpendicular to the boom is . The component points along the boom toward the pivot and exerts zero torque.
- Step 2Correct
You substituted numerical values and simplified the linear equation correctly, but the equation carried the incorrect tension torque from the previous step.
- Step 3Correct
Your final calculation followed from your upstream torque equation, but notice that exceeds the total length of the boom (), which serves as a physical sign that the perpendicular torque was overestimated.
WHAT YOU DID WELL
Compliments from Your TeacherYou chose the pivot at the wall as the axis of rotation, which correctly eliminates the unknown wall hinge reactions.
You placed the boom weight at its midpoint and correctly identified the downward torques from gravity.
You carried out the algebraic substitution and isolation steps accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou selected the trigonometric function rather than when finding the perpendicular component of a force acting at an angle relative to a horizontal lever arm.
REASONING PATH
Your ACEpath teacher’s suggested approach- Perpendicular Force Component
For a horizontal lever arm, torque is , where is measured relative to the horizontal line of the arm.
Always draw the force components at the point of application: the component perpendicular to the lever arm creates torque, while the component parallel to the lever arm passes through the pivot and creates zero torque.
- Physical Bounds Check
A load hanging directly from a rigid member must lie within its geometric length ().
Check whether your calculated position () fits onto the structure () before finalizing your answer.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up the torque balance about the wall pivot using the perpendicular component of the tension: .
Evaluate the torque terms: and .
Subtract the boom torque from the tension torque to find the remaining torque for the load: .
Divide by the weight of the load: .
03 The student omits the gravitational acceleration g when calculating gravitational torques, equating mass directly with force against tension in newtons.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You correctly balanced counterclockwise torque against clockwise torque, but torque is defined as force times lever arm (). You used the masses and directly instead of the gravitational forces and , which creates a dimensional mismatch between on the left and on the right.
- Step 2Correct
Your algebraic manipulation and arithmetic were executed cleanly based on your equation, but the numbers reflect the missing acceleration due to gravity .
- Step 3Correct
Your final calculation followed from your earlier steps, but the result exceeds the boom's total length of , signaling that the downward forces were underestimated by a factor of .
WHAT YOU DID WELL
Compliments from Your TeacherYou chose the pivot as the rotation axis to eliminate the unknown wall reaction forces.
You correctly resolved the perpendicular component of the tension force using .
You correctly placed the boom's center of mass at its geometric midpoint .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted mass values in kilograms directly into a torque balance equation containing tension in newtons, omitting .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing mass with gravitational force when applying rotational equilibrium, missing the dimensional check that torque requires force () multiplied by distance ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Unit and Dimensional Check
Torque has SI units of newton-meters (). Mass alone () cannot produce a torque without multiplying by gravitational acceleration ().
Whenever you sum torques caused by gravity, write explicitly before substituting numerical values.
- Physical Reasonableness Check
The position of a suspended object on a boom of length must satisfy .
Always compare your calculated distance against the total physical length of the structure ( indicates an error).
CORRECTED PATH
ACEpath Teacher's DemonstrationLock it in
For a uniform horizontal beam of length pivoted at one end, where does the force of gravity act?
At the geometric center (midpoint), which is at a distance of from the pivot.
Similar question
A uniform horizontal shelf of length and mass is hinged to a wall at its left end and supported by a vertical cord at its right end. Using , find the tension in the cord.
Answer
. Set : .
A uniform horizontal rod of length and mass is pivoted at its left end. A cable attached to the right end pulls upward at an angle of to the horizontal. A mass hangs at from the pivot. Find the cable tension for static equilibrium ().
Answer
. Torque about pivot: .
A uniform boom of length and mass is pivoted at a wall. A tie wire supports the far end at an angle of above the boom, with a maximum allowable tension of . Using , what is the maximum distance from the pivot where a load of mass can be hung without exceeding the wire's tension limit?
Answer
. Torque balance about the pivot: . Substitute values: .