Resources

An acoustic wave (longitudinal) travels along the axis of an experimental gas tube containing argon at a pressure of P=101.3 kPaP = 101.3\text{ kPa} and density ρ=1.78 kg/m3\rho = 1.78\text{ kg/m}^3, with an adiabatic index of γ=1.67\gamma = 1.67. The longitudinal displacement of the gas layers is measured using laser vibrometry. The local displacement is given by s(x,t)=s0sin⁡(kx−ωt)s(x, t) = s_0 \sin(kx - \omega t) with an amplitude s0=450 nms_0 = 450\text{ nm} and a spatial period given in non-standard laboratory units as Λ=85.0 mm\Lambda = 85.0\text{ mm}. (a) Convert the spatial wavelength into standard meters (mm) and determine the sound speed v=γPρv = \sqrt{\frac{\gamma P}{\rho}} in argon. (b) Calculate the angular wavenumber kk in rad/m\text{rad/m} and the wave frequency ff in kHz\text{kHz}. (c) Determine the peak local pressure variation amplitude ΔPmax=ρv2ks0\Delta P_{\text{max}} = \rho v^2 k s_0, expressing the final value in pascals (Pa\text{Pa}), and confirm whether this pressure fluctuation characterizes a longitudinal compression wave or a transverse shear wave.

Answer and steps

Final answer

(a) λ=0.0850 m\lambda = 0.0850\text{ m} and v=308 m/sv = 308\text{ m/s}; (b) k=73.9 rad/mk = 73.9\text{ rad/m} and f=3.63 kHzf = 3.63\text{ kHz}; (c) ΔPmax=5.64 Pa\Delta P_{\text{max}} = 5.64\text{ Pa}, which characterizes a longitudinal compression wave (alternating density/pressure compressions and rarefactions along the propagation axis).

Steps

Part (a): Standard Wavelength and Speed of Sound

  1. Wavelength Conversion: Convert the given spatial wavelength Λ\Lambda from millimeters to standard SI meters (m\text{m}): λ=85.0 mm=85.0×10−3 m=0.0850 m\lambda = 85.0\text{ mm} = 85.0 \times 10^{-3}\text{ m} = 0.0850\text{ m}
  2. Speed of Sound in Argon: The speed of a longitudinal acoustic wave in an ideal gas under adiabatic conditions is determined by: v=γPρv = \sqrt{\frac{\gamma P}{\rho}} Substitute the given values (P=101.3 kPa=101.3×103 PaP = 101.3\text{ kPa} = 101.3 \times 10^3\text{ Pa}, ρ=1.78 kg/m3\rho = 1.78\text{ kg/m}^3, and γ=1.67\gamma = 1.67): v=1.67⋅101.3×103 Pa1.78 kg/m3=1.69171×1051.78≈95040≈308 m/sv = \sqrt{\frac{1.67 \cdot 101.3 \times 10^3\text{ Pa}}{1.78\text{ kg/m}^3}} = \sqrt{\frac{1.69171 \times 10^5}{1.78}} \approx \sqrt{95040} \approx 308\text{ m/s}

Part (b): Angular Wavenumber and Frequency

  1. Angular Wavenumber (kk): The angular wavenumber represents spatial frequency in radians per meter: k=2πλ=2π0.0850 m≈73.9 rad/mk = \frac{2\pi}{\lambda} = \frac{2\pi}{0.0850\text{ m}} \approx 73.9\text{ rad/m}
  2. Wave Frequency (ff): Using the wave speed relationship v=fλv = f \lambda: f=vλ=308.3 m/s0.0850 m≈3.63×103 Hz=3.63 kHzf = \frac{v}{\lambda} = \frac{308.3\text{ m/s}}{0.0850\text{ m}} \approx 3.63 \times 10^3\text{ Hz} = 3.63\text{ kHz}

Part (c): Pressure Variation Amplitude and Wave Type

  1. Peak Pressure Amplitude (ΔPmax\Delta P_{\text{max}}): The relationship between pressure amplitude and displacement amplitude s0s_0 is: ΔPmax=ρv2ks0\Delta P_{\text{max}} = \rho v^2 k s_0 Noting that ρv2=γP=1.67⋅101.3×103 Pa≈1.692×105 Pa\rho v^2 = \gamma P = 1.67 \cdot 101.3 \times 10^3\text{ Pa} \approx 1.692 \times 10^5\text{ Pa}, and substituting s0=450 nm=450×10−9 ms_0 = 450\text{ nm} = 450 \times 10^{-9}\text{ m}: ΔPmax=(1.692×105 Pa)⋅(73.9 rad/m)⋅(450×10−9 m)≈5.64 Pa\Delta P_{\text{max}} = (1.692 \times 10^5\text{ Pa}) \cdot (73.9\text{ rad/m}) \cdot (450 \times 10^{-9}\text{ m}) \approx 5.64\text{ Pa}
  2. Classification of the Wave:

    • In a longitudinal compression wave, particle displacement occurs parallel to the direction of wave propagation. This motion squeezes particles together into regions of high density and pressure (compressions) and spreads them apart into regions of low density and pressure (rarefactions).
    • In contrast, a transverse shear wave involves particle motion perpendicular to wave travel, requiring shear stiffness. Because fluids (such as argon gas) cannot support static shear stresses, acoustic pressure fluctuations of this type uniquely characterize a longitudinal compression wave.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert pressure from kilopascals to pascals under the square root, underestimating the speed of sound and subsequent frequency and pressure amplitude.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    λ=85.0 mm=0.0850 m\lambda = 85.0\text{ mm} = 0.0850\text{ m}

  2. Step 2

    v=1.67×101.31.78  ⟹  v=95.04=9.75 m/sv = \sqrt{\frac{1.67 \times 101.3}{1.78}} \implies v = \sqrt{95.04} = 9.75\text{ m/s}

    Correct

    v=1.67×101.3×103 Pa1.78 kg/m3≈308 m/sv = \sqrt{\frac{1.67 \times 101.3 \times 10^3\text{ Pa}}{1.78\text{ kg/m}^3}} \approx 308\text{ m/s}

    You omitted the kilo- prefix conversion factor (10310^3) for pressure P=101.3 kPa=101.3×103 PaP = 101.3\text{ kPa} = 101.3 \times 10^3\text{ Pa}, resulting in an underestimated wave speed.

  3. Step 3

    k=2π0.0850=73.9 rad/mk = \frac{2\pi}{0.0850} = 73.9\text{ rad/m}

  4. Step 4

    f=vλ=9.750.0850=114.7 Hz=0.115 kHzf = \frac{v}{\lambda} = \frac{9.75}{0.0850} = 114.7\text{ Hz} = 0.115\text{ kHz}

    Correct

    f=vλ=308.3 m/s0.0850 m≈3.63 kHzf = \frac{v}{\lambda} = \frac{308.3\text{ m/s}}{0.0850\text{ m}} \approx 3.63\text{ kHz}

    Your formula and arithmetic were executed correctly, but your value was affected by the earlier speed of sound error.

  5. Step 5

    s0=450×10−9 m  ⟹  ΔPmax=1.78×(9.75)2×73.9×450×10−9=0.00563 Pas_0 = 450 \times 10^{-9}\text{ m} \implies \Delta P_{\text{max}} = 1.78 \times (9.75)^2 \times 73.9 \times 450 \times 10^{-9} = 0.00563\text{ Pa}

    Correct

    ΔPmax=1.78×(308.3)2×73.9×450×10−9≈5.64 Pa\Delta P_{\text{max}} = 1.78 \times (308.3)^2 \times 73.9 \times 450 \times 10^{-9} \approx 5.64\text{ Pa}

    You correctly converted displacement to meters and applied the formula for peak pressure variation, but the result was scaled down because it used v=9.75 m/sv = 9.75\text{ m/s} instead of 308 m/s308\text{ m/s}.

  6. Step 6

    Longitudinal compression wave\text{Longitudinal compression wave}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted millimeters and nanometers into standard SI base units.

You applied the correct definitions for angular wavenumber and wave frequency.

You correctly identified the acoustic wave as a longitudinal compression wave.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted unit prefix conversion

You entered 101.3101.3 instead of 101.3×103101.3 \times 10^3 for pressure under the radical in the speed of sound formula.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked converting non-base prefix units (kilopascals to pascals) before substituting them into a derived SI formula (v=γPρv = \sqrt{\frac{\gamma P}{\rho}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
SI Unit Prefix Conversion
  • Formulas involving derived SI units like speed (m/s\text{m/s}) require pressure in pascals (Pa\text{Pa}), where 1 kPa=103 Pa1\text{ kPa} = 10^3\text{ Pa}.

  • Always replace prefix abbreviations such as k\text{k} with their numeric powers of ten (10310^3) during the setup line before computing.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. v=γPρ=1.67×(101.3×103 Pa)1.78 kg/m3≈308.3 m/sv = \sqrt{\frac{\gamma P}{\rho}} = \sqrt{\frac{1.67 \times (101.3 \times 10^3\text{ Pa})}{1.78\text{ kg/m}^3}} \approx 308.3\text{ m/s}

  2. f=vλ=308.3 m/s0.0850 m≈3627 Hz=3.63 kHzf = \frac{v}{\lambda} = \frac{308.3\text{ m/s}}{0.0850\text{ m}} \approx 3627\text{ Hz} = 3.63\text{ kHz}

  3. ΔPmax=ρv2ks0=(1.78 kg/m3)(308.3 m/s)2(73.9 rad/m)(450×10−9 m)≈5.64 Pa\Delta P_{\text{max}} = \rho v^2 k s_0 = (1.78\text{ kg/m}^3)(308.3\text{ m/s})^2(73.9\text{ rad/m})(450 \times 10^{-9}\text{ m}) \approx 5.64\text{ Pa}

Final answer

(a) λ=0.0850 m\lambda = 0.0850\text{ m}, v=308 m/sv = 308\text{ m/s}; (b) k=73.9 rad/mk = 73.9\text{ rad/m}, f=3.63 kHzf = 3.63\text{ kHz}; (c) ΔPmax=5.64 Pa\Delta P_{\text{max}} = 5.64\text{ Pa}, longitudinal compression wave

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out all prefixes in scientific notation (10310^3 for kilo) on your initial substitution line.

  • Check that sound speeds in typical atmospheric gases fall in the range of hundreds of meters per second rather than single digits.

OverviewACEpath Teacher's Diagnosis

02 The student confuses angular wavenumber k with regular wavenumber 1/λ, omitting the factor of 2π in calculating k and propagating this error into the pressure amplitude.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    λ=85.0 mm=0.0850 m  ⟹  v=1.67×1013001.78=308.3 m/s\lambda = 85.0\text{ mm} = 0.0850\text{ m} \implies v = \sqrt{\frac{1.67 \times 101300}{1.78}} = 308.3\text{ m/s}

  2. Step 2

    k=1λ=10.0850=11.76 rad/mk = \frac{1}{\lambda} = \frac{1}{0.0850} = 11.76\text{ rad/m}

    Correct

    k=2πλ=2π0.0850 m≈73.9 rad/mk = \frac{2\pi}{\lambda} = \frac{2\pi}{0.0850\text{ m}} \approx 73.9\text{ rad/m}

    You calculated the spatial frequency (ordinary wavenumber 1λ\frac{1}{\lambda}) instead of the angular wavenumber k=2πλk = \frac{2\pi}{\lambda}, omitting the factor of 2π2\pi needed for radians.

  3. Step 3

    f=vλ=308.30.0850=3627 Hz=3.63 kHzf = \frac{v}{\lambda} = \frac{308.3}{0.0850} = 3627\text{ Hz} = 3.63\text{ kHz}

  4. Step 4

    s0=450×10−9 m  ⟹  ΔPmax=1.78×(308.3)2×11.76×450×10−9=0.896 Pas_0 = 450 \times 10^{-9}\text{ m} \implies \Delta P_{\text{max}} = 1.78 \times (308.3)^2 \times 11.76 \times 450 \times 10^{-9} = 0.896\text{ Pa}

    Correct

    ΔPmax=ρv2ks0=1.78×(308.3)2×73.9×450×10−9≈5.64 Pa\Delta P_{\text{max}} = \rho v^2 k s_0 = 1.78 \times (308.3)^2 \times 73.9 \times 450 \times 10^{-9} \approx 5.64\text{ Pa}

    Your formula setup and substitution were completely correct, but the numerical result was affected by substituting your earlier value of kk without the 2π2\pi factor.

  5. Step 5

    Longitudinal compression wave\text{Longitudinal compression wave}

WHAT YOU DID WELL
Compliments from Your Teacher

You converted all units into standard SI values accurately.

You correctly applied the thermodynamic formula for sound speed in an ideal gas.

You correctly evaluated the wave frequency and recognized the wave as longitudinal.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Angular vs. Ordinary Wavenumber Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the angular wavenumber k=2πλk = \frac{2\pi}{\lambda} (measured in radians per meter) with the ordinary wavenumber or spatial frequency ν~=1λ\tilde{\nu} = \frac{1}{\lambda} (cycles per meter), forgetting that the sine wave argument (kx−ωt)(kx - \omega t) requires phase in radians.

REASONING PATH
Your ACEpath teacher’s suggested approach
Angular Wavenumber vs. Spatial Frequency
  • Angular wavenumber includes the full radian cycle: k=2πλk = \frac{2\pi}{\lambda}. Spatial frequency counts cycles per unit length: ν~=1λ\tilde{\nu} = \frac{1}{\lambda}.

  • Whenever a wave function is written as sin⁡(kx−ωt)\sin(kx - \omega t), always check that k=2πλk = \frac{2\pi}{\lambda} just as ω=2πf\omega = 2\pi f.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate the angular wavenumber: k=2πλ=2π0.0850 m≈73.92 rad/mk = \frac{2\pi}{\lambda} = \frac{2\pi}{0.0850\text{ m}} \approx 73.92\text{ rad/m}.

  2. Substitute the corrected kk into the pressure amplitude formula: ΔPmax=ρv2ks0=(1.78 kg/m3)(308.3 m/s)2(73.92 rad/m)(450×10−9 m)≈5.64 Pa\Delta P_{\text{max}} = \rho v^2 k s_0 = (1.78\text{ kg/m}^3)(308.3\text{ m/s})^2(73.92\text{ rad/m})(450 \times 10^{-9}\text{ m}) \approx 5.64\text{ Pa}.

Final answer

(a) λ=0.0850 m\lambda = 0.0850\text{ m}, v=308 m/sv = 308\text{ m/s}; (b) k=73.9 rad/mk = 73.9\text{ rad/m}, f=3.63 kHzf = 3.63\text{ kHz}; (c) ΔPmax=5.64 Pa\Delta P_{\text{max}} = 5.64\text{ Pa}, longitudinal compression wave.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the exact parallel between the temporal domain (T,f,ω=2πfT, f, \omega = 2\pi f) and spatial domain (λ,ν~,k=2πλ\lambda, \tilde{\nu}, k = \frac{2\pi}{\lambda}).

  • Check your units: rad/m\text{rad/m} signals that a factor of 2π2\pi radians per cycle is required.

  • Practice calculating acoustic pressure amplitudes directly from bulk modulus and angular wavenumber.

OverviewACEpath Teacher's Diagnosis

03 The student fails to square the speed of sound v in the formula for peak pressure amplitude ΔP_max = ρv²ks₀, writing ρvks₀ instead.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    λ=85.0 mm=0.0850 m  ⟹  v=1.67×1013001.78=308.3 m/s\lambda = 85.0\text{ mm} = 0.0850\text{ m} \implies v = \sqrt{\frac{1.67 \times 101300}{1.78}} = 308.3\text{ m/s}

  2. Step 2

    k=2πλ=2π0.0850=73.9 rad/m  ⟹  f=vλ=308.30.0850=3627 Hz=3.63 kHzk = \frac{2\pi}{\lambda} = \frac{2\pi}{0.0850} = 73.9\text{ rad/m} \implies f = \frac{v}{\lambda} = \frac{308.3}{0.0850} = 3627\text{ Hz} = 3.63\text{ kHz}

  3. Step 3

    s0=450×10−9 m  ⟹  ΔPmax⁡=ρ×v×k×s0=1.78×308.3×73.9×450×10−9=0.0182 Pas_0 = 450 \times 10^{-9}\text{ m} \implies \Delta P_{\max} = \rho \times v \times k \times s_0 = 1.78 \times 308.3 \times 73.9 \times 450 \times 10^{-9} = 0.0182\text{ Pa}

    Correct

    ΔPmax⁡=ρv2ks0=(1.78 kg/m3)(308.3 m/s)2(73.9 rad/m)(450×10−9 m)≈5.64 Pa\Delta P_{\max} = \rho v^2 k s_0 = (1.78\text{ kg/m}^3)(308.3\text{ m/s})^2(73.9\text{ rad/m})(450 \times 10^{-9}\text{ m}) \approx 5.64\text{ Pa}

    You omitted the exponent 22 on the wave speed vv. The formula for maximum acoustic pressure variation is ΔPmax⁡=Bks0=ρv2ks0\Delta P_{\max} = B k s_0 = \rho v^2 k s_0, which gives approximately 5.64 Pa5.64\text{ Pa}.

  4. Step 4

    Longitudinal compression wave\text{Longitudinal compression wave}

WHAT YOU DID WELL
Compliments from Your Teacher

You converted millimeters to meters accurately.

You correctly applied the formula for the speed of sound in an ideal gas.

You calculated the angular wavenumber and frequency with the correct units and precision.

You correctly identified the wave as a longitudinal compression wave.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula transcription error

You dropped the exponent 22 on vv when writing out the pressure amplitude equation, using ρvks0\rho v k s_0 rather than ρv2ks0\rho v^2 k s_0.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You likely confused the two standard equivalent forms of acoustic pressure amplitude: ΔPmax⁡=ρvωs0\Delta P_{\max} = \rho v \omega s_0 (which contains the first power of vv paired with angular frequency ω\omega) and ΔPmax⁡=ρv2ks0\Delta P_{\max} = \rho v^2 k s_0 (where ω=vk\omega = v k introduces an extra factor of vv).

REASONING PATH
Your ACEpath teacher’s suggested approach
Check bulk modulus substitution
  • Pressure variation amplitude relates to the bulk modulus BB by ΔPmax⁡=Bks0\Delta P_{\max} = B k s_0. Since sound speed is v=B/ρv = \sqrt{B/\rho}, we have B=ρv2B = \rho v^2.

  • Always verify that the factor multiplying ks0k s_0 has units of pressure: [ρv2]=(kg/m3)(m2/s2)=N/m2=Pa[\rho v^2] = (\text{kg/m}^3)(\text{m}^2/\text{s}^2) = \text{N/m}^2 = \text{Pa}.

Dimensional analysis of $\Delta P_{\max}$
  • Dimensional consistency requires [ΔP]=Pa=kg/(m⋅s2)[\Delta P] = \text{Pa} = \text{kg}/(\text{m}\cdot\text{s}^2).

  • Check that [ρv2ks0]=(kg/m3)⋅(m2/s2)⋅(1/m)⋅(m)=kg/(m⋅s2)=Pa[\rho v^2 k s_0] = (\text{kg}/\text{m}^3) \cdot (\text{m}^2/\text{s}^2) \cdot (1/\text{m}) \cdot (\text{m}) = \text{kg}/(\text{m}\cdot\text{s}^2) = \text{Pa}, whereas ρvks0\rho v k s_0 gives units of kg/(m2⋅s)\text{kg}/(\text{m}^2\cdot\text{s}), which is not a unit of pressure.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the complete formula with vv squared: ΔPmax⁡=ρv2ks0\Delta P_{\max} = \rho v^2 k s_0.

  2. Substitute the known values: ΔPmax⁡=(1.78 kg/m3)⋅(308.3 m/s)2⋅(73.9 rad/m)⋅(450×10−9 m)\Delta P_{\max} = (1.78\text{ kg/m}^3) \cdot (308.3\text{ m/s})^2 \cdot (73.9\text{ rad/m}) \cdot (450 \times 10^{-9}\text{ m}).

  3. Evaluate ρv2=1.78⋅95049≈1.692×105 Pa\rho v^2 = 1.78 \cdot 95049 \approx 1.692 \times 10^5\text{ Pa}.

  4. Multiply by ks0k s_0: ΔPmax⁡=(1.692×105 Pa)⋅(73.9 rad/m)⋅(4.50×10−7 m)≈5.64 Pa\Delta P_{\max} = (1.692 \times 10^5\text{ Pa}) \cdot (73.9\text{ rad/m}) \cdot (4.50 \times 10^{-7}\text{ m}) \approx 5.64\text{ Pa}.

Final answer

ΔPmax⁡=5.64 Pa\Delta P_{\max} = 5.64\text{ Pa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Perform a quick dimensional check whenever you compute pressure amplitude to ensure all velocity powers are accounted for.

  • Practice converting between the frequency form ΔPmax⁡=ρvωs0\Delta P_{\max} = \rho v \omega s_0 and the wavenumber form ΔPmax⁡=ρv2ks0\Delta P_{\max} = \rho v^2 k s_0.

Lock it in

Similar question

01

A sound wave travels through helium gas where γ=1.66\gamma = 1.66, P=120 kPaP = 120\text{ kPa}, and ρ=0.197 kg/m3\rho = 0.197\text{ kg/m}^3. Calculate the speed of sound vv in standard meters per second.

Answer

v=1.66×120×103 Pa0.197 kg/m3=1992000.197≈1006 m/sv = \sqrt{\frac{1.66 \times 120 \times 10^3\text{ Pa}}{0.197\text{ kg/m}^3}} = \sqrt{\frac{199200}{0.197}} \approx 1006\text{ m/s}.

02

An acoustic wave with wavelength λ=0.50 m\lambda = 0.50\text{ m} propagates through nitrogen gas (γ=1.40\gamma = 1.40, ρ=1.16 kg/m3\rho = 1.16\text{ kg/m}^3) at an ambient pressure of P=98.0 kPaP = 98.0\text{ kPa}. Calculate both the speed of sound vv and the frequency ff of the wave.

Answer

v=1.40×98.0×103 Pa1.16 kg/m3≈343.9 m/sv = \sqrt{\frac{1.40 \times 98.0 \times 10^3\text{ Pa}}{1.16\text{ kg/m}^3}} \approx 343.9\text{ m/s}. Then f=vλ=343.9 m/s0.50 m≈688 Hzf = \frac{v}{\lambda} = \frac{343.9\text{ m/s}}{0.50\text{ m}} \approx 688\text{ Hz}.

03

In an ideal gas tube, a sound wave has displacement amplitude s0=320 nms_0 = 320\text{ nm} and angular wavenumber k=40.0 rad/mk = 40.0\text{ rad/m}. The gas has density ρ=1.25 kg/m3\rho = 1.25\text{ kg/m}^3 and static pressure P=105 kPaP = 105\text{ kPa} with γ=1.40\gamma = 1.40. Using ρv2=γP\rho v^2 = \gamma P, calculate the peak acoustic pressure variation amplitude ΔPmax=ρv2ks0\Delta P_{\text{max}} = \rho v^2 k s_0 in pascals.

Answer

First, ρv2=γP=1.40×(105×103 Pa)=1.47×105 Pa\rho v^2 = \gamma P = 1.40 \times (105 \times 10^3\text{ Pa}) = 1.47 \times 10^5\text{ Pa}. Then ΔPmax=(1.47×105 Pa)(40.0 rad/m)(320×10−9 m)≈1.88 Pa\Delta P_{\text{max}} = (1.47 \times 10^5\text{ Pa})(40.0\text{ rad/m})(320 \times 10^{-9}\text{ m}) \approx 1.88\text{ Pa}.

Loading workspace…