Resources

In a physics laboratory experiment to calibrate a search coil, a long primary solenoid of length ℓ=0.600 m\ell = 0.600\text{ m} with N1=1200N_1 = 1200 turns carries a time-varying triangular current I1(t)I_1(t). A compact secondary search coil of N2=250N_2 = 250 turns and cross-sectional area A2=4.20×10−4 m2A_2 = 4.20 \times 10^{-4}\text{ m}^2 is placed coaxially near the center inside the solenoid. During a calibration phase, the current in the solenoid ramps linearly from Ii=−2.00 AI_i = -2.00\text{ A} to If=+2.00 AI_f = +2.00\text{ A} over a time span of Δt=0.0500 s\Delta t = 0.0500\text{ s}. Taking the permeability of free space to be μ0=4π×10−7 T⋅m/A\mu_0 = 4\pi \times 10^{-7}\text{ T}\cdot\text{m/A}, calculate the magnitude of the uniform magnetic field rate of change ∣dBdt∣\left|\frac{dB}{dt}\right| inside the solenoid, and determine the magnitude of the induced electromotive force E2\mathcal{E}_2 recorded by a digital oscilloscope connected across the secondary coil.

Answer and steps

Final answer

∣dBdt∣=0.201 T/s\left|\frac{dB}{dt}\right| = 0.201\text{ T/s}, E2=0.0211 V\mathcal{E}_2 = 0.0211\text{ V} (21.1 mV21.1\text{ mV})

Steps

01

Find the rate of change of the current

The current in the primary solenoid changes at a constant rate over the time interval Δt\Delta t:

ΔIΔt=If−IiΔt=2.00 A−(−2.00 A)0.0500 s=4.00 A0.0500 s=80.0 A/s\frac{\Delta I}{\Delta t} = \frac{I_f - I_i}{\Delta t} = \frac{2.00\text{ A} - (-2.00\text{ A})}{0.0500\text{ s}} = \frac{4.00\text{ A}}{0.0500\text{ s}} = 80.0\text{ A/s}


02

Determine the turn density of the primary solenoid

For an ideal long solenoid, the number of turns per unit length n1n_1 is given by:

n1=N1ℓ=1200 turns0.600 m=2000 turns/mn_1 = \frac{N_1}{\ell} = \frac{1200\text{ turns}}{0.600\text{ m}} = 2000\text{ turns/m}


03

Calculate the rate of change of the magnetic field ∣dBdt∣\left|\frac{dB}{dt}\right|

The magnetic field inside a long solenoid near its center is uniform and given by:

B(t)=μ0n1I1(t)B(t) = \mu_0 n_1 I_1(t)

Differentiating both sides with respect to time gives the rate of change of the magnetic field:

∣dBdt∣=μ0n1∣ΔIΔt∣\left|\frac{dB}{dt}\right| = \mu_0 n_1 \left|\frac{\Delta I}{\Delta t}\right|

Substitute the numerical values:

∣dBdt∣=(4π×10−7 T⋅m/A)⋅(2000 m−1)⋅(80.0 A/s)\left|\frac{dB}{dt}\right| = (4\pi \times 10^{-7}\text{ T}\cdot\text{m/A}) \cdot (2000\text{ m}^{-1}) \cdot (80.0\text{ A/s})

∣dBdt∣=0.064π T/s≈0.201 T/s\left|\frac{dB}{dt}\right| = 0.064\pi\text{ T/s} \approx 0.201\text{ T/s}


04

Calculate the induced electromotive force E2\mathcal{E}_2

Because the search coil is placed coaxially near the center inside the solenoid, the magnetic field is perpendicular to the plane of its turns (θ=0∘\theta = 0^\circ). The magnetic flux through a single turn of the search coil is:

Φ2=BA2\Phi_2 = B A_2

Common Pitfall: Be careful to use the area of the secondary coil (A2A_2), not the cross-sectional area of the primary solenoid. The induced EMF depends only on the magnetic flux passing through the secondary coil's own area.

By Faraday's law of induction, the magnitude of the total electromotive force induced across the N2N_2 turns of the secondary coil is:

E2=N2∣dΦ2dt∣=N2A2∣dBdt∣\mathcal{E}_2 = N_2 \left|\frac{d\Phi_2}{dt}\right| = N_2 A_2 \left|\frac{dB}{dt}\right|

Substitute the given parameters:

E2=250⋅(4.20×10−4 m2)⋅(0.20106 T/s)\mathcal{E}_2 = 250 \cdot (4.20 \times 10^{-4}\text{ m}^2) \cdot (0.20106\text{ T/s})

E2≈0.0211 V=21.1 mV\mathcal{E}_2 \approx 0.0211\text{ V} = 21.1\text{ mV}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates ΔI as 2.00 - 2.00 = 0 or incorrectly uses the single-ended current amplitude ΔI = 2.00 A instead of the peak-to-peak change ΔI = 4.00 A, halving the rate of change of B and the induced EMF.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔI=2.00−0=2.00 A  ⟹  ∣dIdt∣=2.000.0500=40.0 A/s\Delta I = 2.00 - 0 = 2.00\text{ A} \implies \left|\frac{dI}{dt}\right| = \frac{2.00}{0.0500} = 40.0\text{ A/s}

    Correct

    ΔI=If−Ii=2.00 A−(−2.00 A)=4.00 A  ⟹  ∣dIdt∣=4.00 A0.0500 s=80.0 A/s\Delta I = I_f - I_i = 2.00\text{ A} - (-2.00\text{ A}) = 4.00\text{ A} \implies \left|\frac{dI}{dt}\right| = \frac{4.00\text{ A}}{0.0500\text{ s}} = 80.0\text{ A/s}

    The current ramps from an initial value of Ii=−2.00 AI_i = -2.00\text{ A} to a final value of If=+2.00 AI_f = +2.00\text{ A}. The change in current is ΔI=If−Ii=2.00 A−(−2.00 A)=4.00 A\Delta I = I_f - I_i = 2.00\text{ A} - (-2.00\text{ A}) = 4.00\text{ A}, not 2.00 A2.00\text{ A}.

  2. Step 2

    n1=12000.600=2000 m−1n_1 = \frac{1200}{0.600} = 2000\text{ m}^{-1}

  3. Step 3

    ∣dBdt∣=μ0n1∣dIdt∣=(4π×10−7)(2000)(40.0)=0.101 T/s\left|\frac{dB}{dt}\right| = \mu_0 n_1 \left|\frac{dI}{dt}\right| = (4\pi \times 10^{-7})(2000)(40.0) = 0.101\text{ T/s}

    Correct

    ∣dBdt∣=μ0n1∣dIdt∣=(4π×10−7 T⋅m/A)(2000 m−1)(80.0 A/s)≈0.201 T/s\left|\frac{dB}{dt}\right| = \mu_0 n_1 \left|\frac{dI}{dt}\right| = (4\pi \times 10^{-7}\text{ T}\cdot\text{m/A})(2000\text{ m}^{-1})(80.0\text{ A/s}) \approx 0.201\text{ T/s}

    Your formula for the time derivative of the solenoid's magnetic field is completely correct, but your result is halved because of the ∣dIdt∣\left|\frac{dI}{dt}\right| value carried over from Step 1.

  4. Step 4

    E2=N2A2∣dBdt∣  ⟹  E2=(250)(4.20×10−4)(0.101)  ⟹  E2=1.06×10−2 VE_2 = N_2 A_2 \left|\frac{dB}{dt}\right| \implies E_2 = (250)(4.20 \times 10^{-4})(0.101) \implies E_2 = 1.06 \times 10^{-2}\text{ V}

    Correct

    E2=N2A2∣dBdt∣=(250)(4.20×10−4 m2)(0.201 T/s)≈0.0211 V\mathcal{E}_2 = N_2 A_2 \left|\frac{dB}{dt}\right| = (250)(4.20 \times 10^{-4}\text{ m}^2)(0.201\text{ T/s}) \approx 0.0211\text{ V}

    You correctly applied Faraday's law using the area and turn count of the search coil, but your final answer is off by a factor of 2 due to the earlier current calculation.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the turn density of the primary solenoid.

You used the correct relationship between the rate of change of current and the rate of change of magnetic field inside a long solenoid.

You correctly applied Faraday's law of induction using the secondary coil's turn count and cross-sectional area.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Peak-to-Peak vs Amplitude Current Change

You wrote ΔI=2.00−0=2.00 A\Delta I = 2.00 - 0 = 2.00\text{ A} instead of subtracting the negative initial current Ii=−2.00 AI_i = -2.00\text{ A}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the amplitude of the alternating/bipolar ramp as the total change ΔI\Delta I, overlooking that swinging from a negative current to a positive current doubles the net change across zero.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define Change as Final Minus Initial
  • For any quantity changing between two states, ΔX=Xf−Xi\Delta X = X_f - X_i. When Xi<0X_i < 0 and Xf>0X_f > 0, ΔX=∣Xf∣+∣Xi∣\Delta X = |X_f| + |X_i|.

  • Always explicitly substitute both signs into ΔI=If−Ii=(+2.00)−(−2.00)\Delta I = I_f - I_i = (+2.00) - (-2.00) rather than measuring from zero.

Bipolar Swings Span Peak-to-Peak
  • A symmetric signal between −I0-I_0 and +I0+I_0 has an amplitude of I0I_0, but its total swing (peak-to-peak) is 2I02I_0.

  • Check whether the problem specifies a ramp from zero or a complete reversal across zero before computing the time derivative.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the true change in current: ΔI=If−Ii=2.00 A−(−2.00 A)=4.00 A\Delta I = I_f - I_i = 2.00\text{ A} - (-2.00\text{ A}) = 4.00\text{ A}.

  2. Determine the rate of change of current: ∣dIdt∣=4.00 A0.0500 s=80.0 A/s\left|\frac{dI}{dt}\right| = \frac{4.00\text{ A}}{0.0500\text{ s}} = 80.0\text{ A/s}.

  3. Recalculate the magnetic field rate of change: ∣dBdt∣=μ0n1∣dIdt∣=(4π×10−7)(2000)(80.0)≈0.201 T/s\left|\frac{dB}{dt}\right| = \mu_0 n_1 \left|\frac{dI}{dt}\right| = (4\pi \times 10^{-7})(2000)(80.0) \approx 0.201\text{ T/s}.

  4. Evaluate the induced EMF: E2=N2A2∣dBdt∣=(250)(4.20×10−4 m2)(0.20106 T/s)≈0.0211 V\mathcal{E}_2 = N_2 A_2 \left|\frac{dB}{dt}\right| = (250)(4.20 \times 10^{-4}\text{ m}^2)(0.20106\text{ T/s}) \approx 0.0211\text{ V}.

Final answer

∣dBdt∣=0.201 T/s\left|\frac{dB}{dt}\right| = 0.201\text{ T/s}, E2=0.0211 V\mathcal{E}_2 = 0.0211\text{ V} (21.1 mV21.1\text{ mV})

NEXT STEPS
Final Takeaways from Your Teacher
  • Watch out for signs when calculating intervals: write out (If)−(Ii)(I_f) - (I_i) with explicit parentheses around negative numbers.

  • Verify whether an alternating or triangular waveform ramps from zero to a peak (I0I_0) or between symmetric peaks (−I0-I_0 to +I0+I_0).

  • Practice with the flashcards and targeted exercises below to solidify handling polarity reversals in induction problems.

OverviewACEpath Teacher's Diagnosis

02 The student uses the total number of turns N_1 instead of the turns per unit length n_1 = N_1 / ℓ when calculating the magnetic field inside the solenoid, overestimating |dB/dt| and E_2 by a factor of 1 / ℓ.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ∣dIdt∣=2.00−(−2.00)0.0500=80.0 A/s\left|\frac{dI}{dt}\right| = \frac{2.00 - (-2.00)}{0.0500} = 80.0\text{ A/s}

  2. Step 2

    ∣dBdt∣=μ0N1∣dIdt∣⟹∣dBdt∣=(4π×10−7)(1200)(80.0)=0.121 T/s\left|\frac{dB}{dt}\right| = \mu_0 N_1 \left|\frac{dI}{dt}\right| \Longrightarrow \left|\frac{dB}{dt}\right| = (4\pi \times 10^{-7})(1200)(80.0) = 0.121\text{ T/s}

    Correct

    ∣dBdt∣=μ0n1∣dIdt∣=μ0(N1ℓ)∣dIdt∣=(4π×10−7 T⋅m/A)(12000.600 m)(80.0 A/s)≈0.201 T/s\left|\frac{dB}{dt}\right| = \mu_0 n_1 \left|\frac{dI}{dt}\right| = \mu_0 \left(\frac{N_1}{\ell}\right) \left|\frac{dI}{dt}\right| = (4\pi \times 10^{-7}\text{ T}\cdot\text{m/A}) \left(\frac{1200}{0.600\text{ m}}\right)(80.0\text{ A/s}) \approx 0.201\text{ T/s}

    The magnetic field inside an ideal solenoid depends on the turns per unit length n1=N1ℓn_1 = \frac{N_1}{\ell}, not the total turn count N1N_1 alone. Because you omitted dividing by the solenoid length ℓ=0.600 m\ell = 0.600\text{ m}, your field rate of change was underestimated.

  3. Step 3

    E2=N2A2∣dBdt∣⟹E2=(250)(4.20×10−4)(0.121)=1.27×10−2 VE_2 = N_2 A_2 \left|\frac{dB}{dt}\right| \Longrightarrow E_2 = (250)(4.20 \times 10^{-4})(0.121) = 1.27 \times 10^{-2}\text{ V}

    Correct

    E2=N2A2∣dBdt∣=250⋅(4.20×10−4 m2)⋅(0.201 T/s)≈0.0211 V=21.1 mV\mathcal{E}_2 = N_2 A_2 \left|\frac{dB}{dt}\right| = 250 \cdot (4.20 \times 10^{-4}\text{ m}^2) \cdot (0.201\text{ T/s}) \approx 0.0211\text{ V} = 21.1\text{ mV}

    Your application of Faraday's law E2=N2A2∣dBdt∣\mathcal{E}_2 = N_2 A_2 \left|\frac{dB}{dt}\right| was conceptually sound, but the numerical answer is incorrect due to carrying forward the erroneous value of ∣dBdt∣\left|\frac{dB}{dt}\right| from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the time rate of change of the primary current as 80.0 A/s80.0\text{ A/s}.

You correctly related the induced electromotive force in the search coil to the rate of change of magnetic flux via Faraday's law.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
turn_density_vs_total_turns

You substituted the total number of turns N1N_1 in place of the turns per unit length n1n_1 in the solenoid field formula.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing total turns NN with turn density n=Nℓn = \frac{N}{\ell} in the magnetic field formula for an ideal solenoid (B=μ0nIB = \mu_0 n I).

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Solenoid Field Formula
  • The axial magnetic field inside a long solenoid is B=μ0nIB = \mu_0 n I, where n=Nℓn = \frac{N}{\ell} has units of m−1\text{m}^{-1}.

  • Always check the units of nn: verify whether the problem gives turn density directly or gives total turns NN and coil length ℓ\ell separately.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the turn density of the primary solenoid: n1=N1ℓ=12000.600 m=2000 m−1n_1 = \frac{N_1}{\ell} = \frac{1200}{0.600\text{ m}} = 2000\text{ m}^{-1}.

  2. Calculate the rate of change of the magnetic field: ∣dBdt∣=μ0n1∣dIdt∣=(4π×10−7 T⋅m/A)(2000 m−1)(80.0 A/s)≈0.201 T/s\left|\frac{dB}{dt}\right| = \mu_0 n_1 \left|\frac{dI}{dt}\right| = (4\pi \times 10^{-7}\text{ T}\cdot\text{m/A})(2000\text{ m}^{-1})(80.0\text{ A/s}) \approx 0.201\text{ T/s}.

  3. Substitute into Faraday's law for the secondary coil: E2=N2A2∣dBdt∣=(250)(4.20×10−4 m2)(0.20106 T/s)≈0.0211 V=21.1 mV\mathcal{E}_2 = N_2 A_2 \left|\frac{dB}{dt}\right| = (250)(4.20 \times 10^{-4}\text{ m}^2)(0.20106\text{ T/s}) \approx 0.0211\text{ V} = 21.1\text{ mV}.

Final answer

∣dBdt∣=0.201 T/s\left|\frac{dB}{dt}\right| = 0.201\text{ T/s}, E2=0.0211 V\mathcal{E}_2 = 0.0211\text{ V} (21.1 mV21.1\text{ mV})

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that you calculate n=Nℓn = \frac{N}{\ell} whenever a solenoid's length and total turns are provided.

  • Perform a quick dimensional analysis: μ0I\mu_0 I has units of T⋅m\text{T}\cdot\text{m}, so multiplying by nn (units m−1\text{m}^{-1}) yields Tesla, whereas multiplying by dimensionless NN does not.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to multiply by the number of turns N_2 of the secondary search coil when applying Faraday's law, calculating the induced EMF across only a single turn.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ∣dIdt∣=2.00−(−2.00)0.0500=80.0 A/s\left|\frac{dI}{dt}\right| = \frac{2.00 - (-2.00)}{0.0500} = 80.0\text{ A/s}

  2. Step 2

    n1=12000.600=2000 m−1n_1 = \frac{1200}{0.600} = 2000\text{ m}^{-1}

  3. Step 3

    ∣dBdt∣=μ0n1∣dIdt∣=(4π×10−7)(2000)(80.0)=0.201 T/s\left|\frac{dB}{dt}\right| = \mu_0 n_1 \left|\frac{dI}{dt}\right| = (4\pi \times 10^{-7})(2000)(80.0) = 0.201\text{ T/s}

  4. Step 4

    E2=dΦdt=A2∣dBdt∣  ⟹  E2=(4.20×10−4)(0.201)=8.44×10−5 VE_2 = \frac{d\Phi}{dt} = A_2 \left|\frac{dB}{dt}\right| \implies E_2 = (4.20 \times 10^{-4})(0.201) = 8.44 \times 10^{-5}\text{ V}

    Correct

    E2=N2∣dΦ2dt∣=N2A2∣dBdt∣=250⋅(4.20×10−4 m2)⋅(0.201 T/s)≈0.0211 V\mathcal{E}_2 = N_2 \left|\frac{d\Phi_2}{dt}\right| = N_2 A_2 \left|\frac{dB}{dt}\right| = 250 \cdot (4.20 \times 10^{-4}\text{ m}^2) \cdot (0.201\text{ T/s}) \approx 0.0211\text{ V}

    You calculated the induced electromotive force across just one single turn of the search coil rather than multiplying by the total number of turns N2=250N_2 = 250.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the net change in current over time and determined ∣dIdt∣=80.0 A/s\left|\frac{dI}{dt}\right| = 80.0\text{ A/s}.

You correctly applied the long solenoid turn-density relation n1=N1ℓn_1 = \frac{N_1}{\ell}.

You correctly related ∣dBdt∣\left|\frac{dB}{dt}\right| to the rate of current change inside the solenoid.

You correctly identified that the magnetic flux through the secondary coil uses its own cross-sectional area A2A_2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Turn Count in Faraday's Law

You wrote E=dΦdt\mathcal{E} = \frac{d\Phi}{dt} instead of E=NdΦdt\mathcal{E} = N \frac{d\Phi}{dt}, forgetting that the turns in a coil are connected in series so their individual induced EMFs sum together.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating a multi-turn coil as a single loop when applying Faraday's law of induction. For an NN-turn closely wound coil, the total magnetic flux linkage is λ=NΦ\lambda = N\Phi, leading to an induced EMF of E=N∣dΦdt∣\mathcal{E} = N\left|\frac{d\Phi}{dt}\right|.

REASONING PATH
Your ACEpath teacher’s suggested approach
Flux Linkage Rule
  • For a coil of NN turns where each turn encloses the same magnetic flux Φ\Phi, Faraday's law gives E=N∣dΦdt∣\mathcal{E} = N\left|\frac{d\Phi}{dt}\right|.

  • Whenever a secondary coil or search coil is specified with a turn count NN, explicitly write out E=NA∣dBdt∣\mathcal{E} = N A \left|\frac{dB}{dt}\right| before substituting numerical values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that the search coil has N2=250N_2 = 250 turns in series, so the total induced EMF is E2=N2A2∣dBdt∣\mathcal{E}_2 = N_2 A_2 \left|\frac{dB}{dt}\right|.

  2. Substitute N2=250N_2 = 250, A2=4.20×10−4 m2A_2 = 4.20 \times 10^{-4}\text{ m}^2, and ∣dBdt∣=0.20106 T/s\left|\frac{dB}{dt}\right| = 0.20106\text{ T/s}: E2=250⋅(4.20×10−4)⋅(0.20106)=0.0211 V\mathcal{E}_2 = 250 \cdot (4.20 \times 10^{-4}) \cdot (0.20106) = 0.0211\text{ V}.

Final answer

∣dBdt∣=0.201 T/s\left|\frac{dB}{dt}\right| = 0.201\text{ T/s}, E2=0.0211 V\mathcal{E}_2 = 0.0211\text{ V} (21.1 mV21.1\text{ mV})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review Faraday's law for NN-turn coils and write out the factor NN as part of the formula in your first line of working.

  • Complete the targeted flashcards and practice exercises below to reinforce using flux linkage in induction problems.

Lock it in

Similar question

01

A solenoid with turn density n=1500 m−1n = 1500\text{ m}^{-1} carries a current that ramps linearly from −1.50 A-1.50\text{ A} to +1.50 A+1.50\text{ A} over a duration of 0.0300 s0.0300\text{ s}. Calculate the magnitude of the rate of change of the magnetic field ∣dBdt∣\left|\frac{dB}{dt}\right| inside the solenoid.

Answer

ΔI=1.50 A−(−1.50 A)=3.00 A\Delta I = 1.50\text{ A} - (-1.50\text{ A}) = 3.00\text{ A}. Thus ∣dIdt∣=3.00 A0.0300 s=100 A/s\left|\frac{dI}{dt}\right| = \frac{3.00\text{ A}}{0.0300\text{ s}} = 100\text{ A/s}. The magnetic field rate of change is ∣dBdt∣=μ0n∣dIdt∣=(4π×10−7 T⋅m/A)(1500 m−1)(100 A/s)≈0.188 T/s\left|\frac{dB}{dt}\right| = \mu_0 n \left|\frac{dI}{dt}\right| = (4\pi \times 10^{-7}\text{ T}\cdot\text{m/A})(1500\text{ m}^{-1})(100\text{ A/s}) \approx 0.188\text{ T/s}.

02

A circular flat coil with N=100N = 100 turns and radius r=0.050 mr = 0.050\text{ m} is oriented perpendicular to a uniform magnetic field. The field reverses linearly from +0.250 T+0.250\text{ T} to −0.250 T-0.250\text{ T} in 25.0 ms25.0\text{ ms}. Find the magnitude of the induced electromotive force in the coil.

Answer

The change in magnetic field is ΔB=−0.250 T−(+0.250 T)=−0.500 T\Delta B = -0.250\text{ T} - (+0.250\text{ T}) = -0.500\text{ T}, so ∣ΔBΔt∣=0.500 T0.0250 s=20.0 T/s\left|\frac{\Delta B}{\Delta t}\right| = \frac{0.500\text{ T}}{0.0250\text{ s}} = 20.0\text{ T/s}. The area is A=πr2=π(0.050 m)2≈7.854×10−3 m2A = \pi r^2 = \pi (0.050\text{ m})^2 \approx 7.854 \times 10^{-3}\text{ m}^2. By Faraday's law, E=NA∣ΔBΔt∣=100×(7.854×10−3 m2)×20.0 T/s≈15.7 V\mathcal{E} = N A \left|\frac{\Delta B}{\Delta t}\right| = 100 \times (7.854 \times 10^{-3}\text{ m}^2) \times 20.0\text{ T/s} \approx 15.7\text{ V}.

03

A square conducting loop of side length s=0.120 ms = 0.120\text{ m} and resistance R=0.400 ΩR = 0.400\ \Omega lies in the xyxy-plane inside a long solenoid. The solenoid current is a symmetric triangular wave oscillating between −5.00 A-5.00\text{ A} and +5.00 A+5.00\text{ A} at a frequency of 50.0 Hz50.0\text{ Hz} (each linear ramp from minimum to maximum takes a quarter period, Δt=5.00 ms\Delta t = 5.00\text{ ms}). If the solenoid has 2500 turns/m2500\text{ turns/m}, determine the constant magnitude of the induced electric current flowing in the loop during each ramp.

Answer

For each ramp, ΔI=5.00 A−(−5.00 A)=10.0 A\Delta I = 5.00\text{ A} - (-5.00\text{ A}) = 10.0\text{ A} over Δt=5.00×10−3 s\Delta t = 5.00 \times 10^{-3}\text{ s}, yielding ∣dIdt∣=2000 A/s\left|\frac{dI}{dt}\right| = 2000\text{ A/s}. The field rate of change is ∣dBdt∣=μ0n∣dIdt∣=(4π×10−7)(2500)(2000)=2π T/s≈6.283 T/s\left|\frac{dB}{dt}\right| = \mu_0 n \left|\frac{dI}{dt}\right| = (4\pi \times 10^{-7})(2500)(2000) = 2\pi\text{ T/s} \approx 6.283\text{ T/s}. The loop area is A=s2=0.0144 m2A = s^2 = 0.0144\text{ m}^2. The induced EMF magnitude is E=A∣dBdt∣=0.0144×2π≈0.09048 V\mathcal{E} = A \left|\frac{dB}{dt}\right| = 0.0144 \times 2\pi \approx 0.09048\text{ V}. Therefore, the induced current is Iind=ER=0.09048 V0.400 Ω≈0.226 AI_{\text{ind}} = \frac{\mathcal{E}}{R} = \frac{0.09048\text{ V}}{0.400\ \Omega} \approx 0.226\text{ A}.

Loading workspace…