Resources

A uniform rectangular trapdoor of width w=0.800 mw = 0.800\text{ m} and mass m=15.0 kgm = 15.0\text{ kg} is hinged along one edge. A student holds the opposite free edge of the door such that the applied pulling force is always directed perpendicular to the face of the door. The student expects the required force to be largest when the door is nearly vertical. By setting up the gravitational torque and applied torque equations as a function of the opening angle θ\theta measured above the horizontal (0∘≤θ<90∘0^\circ \le \theta < 90^\circ), calculate the required pulling force FF at θ=0.00∘\theta = 0.00^\circ and at θ=60.0∘\theta = 60.0^\circ. Use g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer and steps

Final answer

F(0.00∘)=73.5 NF(0.00^\circ) = 73.5\text{ N}, F(60.0∘)=36.8 NF(60.0^\circ) = 36.8\text{ N}

Steps

01

Identify the Forces and Choose the Pivot

To find the required lifting force FF, we analyze the rotational equilibrium of the trapdoor about the hinge line:

  • Axis of rotation (Pivot): The hinge along one edge of the door.
  • Gravitational force (mgmg): Acts vertically downward through the center of mass, located at a distance of w2\frac{w}{2} from the hinge along the door's centerline.
  • Applied force (FF): Exerted at the outer edge at a distance of ww from the hinge, oriented perpendicular to the door's surface.
02

Formulate the Torque Equilibrium

Let θ\theta be the angle of the door above the horizontal (0∘≤θ<90∘0^\circ \le \theta < 90^\circ).

  • The perpendicular distance (lever arm) from the pivot to the line of action of gravity is: r⊥,g=w2cos⁡θr_{\perp, g} = \frac{w}{2}\cos\theta Therefore, the clockwise torque produced by gravity is: τg=mg(w2cos⁡θ)\tau_g = mg \left(\frac{w}{2}\cos\theta\right)
  • Because the applied force FF is perpendicular to the door, its line of action is already at 90∘90^\circ to the position vector from the hinge to the outer edge: τF=F⋅w\tau_F = F \cdot w

For static equilibrium, the net torque about the hinge must equal zero: ∑τ=τF−τg=0\sum \tau = \tau_F - \tau_g = 0

F⋅w=12mgwcos⁡θF \cdot w = \frac{1}{2}mgw\cos\theta

Dividing both sides by the width ww: F(θ)=12mgcos⁡θF(\theta) = \frac{1}{2}mg\cos\theta

Common Pitfall: A frequent misconception is that lifting an object becomes harder as it is tilted upward. In reality, the gravitational lever arm w2cos⁡θ\frac{w}{2}\cos\theta is maximized when the door is completely flat (θ=0∘\theta = 0^\circ) and decreases toward zero as the door approaches the vertical position (θ→90∘\theta \to 90^\circ). Thus, the required force decreases as the door opens wider.


03

Calculate FF at the Given Angles

Given:

  • m=15.0 kgm = 15.0\text{ kg}
  • g=9.80 m/s2g = 9.80\text{ m/s}^2
  • mg=15.0⋅9.80=147 Nmg = 15.0 \cdot 9.80 = 147\text{ N}

At θ=0.00∘\theta = 0.00^\circ:

F(0.00∘)=12(147)cos⁡(0.00∘)=73.5⋅1.000=73.5 NF(0.00^\circ) = \frac{1}{2}(147)\cos(0.00^\circ) = 73.5 \cdot 1.000 = 73.5\text{ N}

At θ=60.0∘\theta = 60.0^\circ:

F(60.0∘)=12(147)cos⁡(60.0∘)=73.5⋅0.500=36.75 N≈36.8 NF(60.0^\circ) = \frac{1}{2}(147)\cos(60.0^\circ) = 73.5 \cdot 0.500 = 36.75\text{ N} \approx 36.8\text{ N}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the sine and cosine components when resolving the torque of gravity relative to the horizontal angle, using sin θ instead of cos θ.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    τnet=F∗w−mg∗w2∗sin⁡θ=0  ⟹  F=(12)mgsin⁡θ\tau_{\text{net}} = F * w - mg * \frac{w}{2} * \sin\theta = 0 \implies F = \left(\frac{1}{2}\right)mg \sin\theta

    Correct

    τnet=F⋅w−mg⋅w2cos⁡θ=0  ⟹  F=12mgcos⁡θ\tau_{\text{net}} = F \cdot w - mg \cdot \frac{w}{2}\cos\theta = 0 \implies F = \frac{1}{2}mg\cos\theta

    Gravity acts straight down, while the angle θ\theta is measured above the horizontal. The perpendicular lever arm from the hinge to the door's center of mass is the horizontal component w2cos⁡θ\frac{w}{2}\cos\theta, not w2sin⁡θ\frac{w}{2}\sin\theta.

  2. Step 2

    F=0.5∗15.0∗9.80∗sin⁡(0∘)  ⟹  F=0 NF = 0.5 * 15.0 * 9.80 * \sin(0^\circ) \implies F = 0\text{ N}

    Correct

    F(0.00∘)=0.5⋅15.0⋅9.80⋅cos⁡(0.00∘)=73.5 NF(0.00^\circ) = 0.5 \cdot 15.0 \cdot 9.80 \cdot \cos(0.00^\circ) = 73.5\text{ N}

    Your arithmetic follows your formula from Step 1 correctly, but substituting into the sine expression gave 0 N0\text{ N} instead of the maximum required force at the horizontal position.

  3. Step 3

    F=0.5∗15.0∗9.80∗sin⁡(60.0∘)  ⟹  F=73.5∗0.866  ⟹  F=63.7 NF = 0.5 * 15.0 * 9.80 * \sin(60.0^\circ) \implies F = 73.5 * 0.866 \implies F = 63.7\text{ N}

    Correct

    F(60.0∘)=0.5⋅15.0⋅9.80⋅cos⁡(60.0∘)=73.5⋅0.500=36.8 NF(60.0^\circ) = 0.5 \cdot 15.0 \cdot 9.80 \cdot \cos(60.0^\circ) = 73.5 \cdot 0.500 = 36.8\text{ N}

    You evaluated the numbers accurately, but because of the sine function from Step 1, the result is 63.7 N63.7\text{ N} instead of 36.8 N36.8\text{ N}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that gravity acts at the center of mass at a distance of w2\frac{w}{2} from the hinge.

You set up the rotational equilibrium condition τnet=0\tau_{\text{net}} = 0 with opposing signs for the two torques.

You accurately executed all numerical multiplications and angle evaluations.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Component Error in Gravitational Torque

You used sin⁡θ\sin\theta instead of cos⁡θ\cos\theta when calculating the gravitational lever arm from the horizontal.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When an object tilts at an angle θ\theta relative to the horizontal, the horizontal lever arm perpendicular to the vertical line of gravity is rcos⁡θr\cos\theta. Using sin⁡θ\sin\theta implies that gravity creates zero torque when the trapdoor is flat, which violates the physical reality of lifting a horizontal load.

REASONING PATH
Your ACEpath teacher’s suggested approach
Find the Perpendicular Lever Arm
  • τ=r⊥F=rF⊥\tau = r_\perp F = r F_\perp

  • Sketch the vertical line of action through the center of mass, then find the perpendicular distance from the pivot to this vertical line using right-triangle trigonometry (r⊥=rcos⁡θr_\perp = r\cos\theta).

Sanity Check Boundary Angles
  • A horizontal beam experiences maximum gravitational torque, while a vertical beam experiences zero gravitational torque.

  • Check your expression at θ=0∘\theta = 0^\circ: holding a horizontal trapdoor must require a non-zero force, so the factor must be cos⁡(0∘)=1\cos(0^\circ) = 1, not sin⁡(0∘)=0\sin(0^\circ) = 0.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the lever arm of gravity perpendicular to the vertical line of action: r⊥,g=w2cos⁡θr_{\perp, g} = \frac{w}{2}\cos\theta.

  2. Write the net torque balance about the hinge: ∑τ=F⋅w−mg(w2cos⁡θ)=0  ⟹  F(θ)=12mgcos⁡θ\sum \tau = F \cdot w - mg\left(\frac{w}{2}\cos\theta\right) = 0 \implies F(\theta) = \frac{1}{2}mg\cos\theta.

  3. Calculate FF at θ=0.00∘\theta = 0.00^\circ: F(0.00∘)=12(15.0 kg)(9.80 m/s2)cos⁡(0.00∘)=73.5 NF(0.00^\circ) = \frac{1}{2}(15.0\text{ kg})(9.80\text{ m/s}^2)\cos(0.00^\circ) = 73.5\text{ N}.

  4. Calculate FF at θ=60.0∘\theta = 60.0^\circ: F(60.0∘)=12(15.0 kg)(9.80 m/s2)cos⁡(60.0∘)=73.5⋅0.500=36.8 NF(60.0^\circ) = \frac{1}{2}(15.0\text{ kg})(9.80\text{ m/s}^2)\cos(60.0^\circ) = 73.5 \cdot 0.500 = 36.8\text{ N}.

Final answer

F(0.00∘)=73.5 NF(0.00^\circ) = 73.5\text{ N}, F(60.0∘)=36.8 NF(60.0^\circ) = 36.8\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always sketch the line of action of the force and physically identify the right triangle forming the perpendicular lever arm.

  • Test boundary angles (0∘0^\circ and 90∘90^\circ) to verify that your trigonometric choice behaves realistically.

OverviewACEpath Teacher's Diagnosis

02 The student assumes gravity acts at the free edge at distance w rather than at the center of mass at w/2, doubling the required force.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    τapplied=F⋅w\tau_{\text{applied}} = F \cdot w, τgravity=mg⋅w⋅cos⁡θ\tau_{\text{gravity}} = mg \cdot w \cdot \cos\theta

    Correct

    τapplied=F⋅w\tau_{\text{applied}} = F \cdot w, τgravity=mg⋅(w2)⋅cos⁡θ\tau_{\text{gravity}} = mg \cdot \left(\frac{w}{2}\right) \cdot \cos\theta

    For a uniform trapdoor, gravity acts through the center of mass, which is located halfway along the width at distance w2\frac{w}{2} from the hinge, not at the outer edge ww.

  2. Step 2

    F⋅w=mg⋅w⋅cos⁡θ  ⟹  F=mgcos⁡θF \cdot w = mg \cdot w \cdot \cos\theta \implies F = mg\cos\theta

    Correct

    F⋅w=mg⋅(w2)cos⁡θ  ⟹  F=12mgcos⁡θF \cdot w = mg \cdot \left(\frac{w}{2}\right) \cos\theta \implies F = \frac{1}{2}mg\cos\theta

    This step correctly equates the torques and cancels ww, but it carries forward the missing factor of 12\frac{1}{2} from the gravity lever arm.

  3. Step 3

    F=15.0⋅9.80⋅cos⁡(0∘)=147 NF = 15.0 \cdot 9.80 \cdot \cos(0^\circ) = 147\text{ N}

    Correct

    F(0.00∘)=12(15.0)(9.80)cos⁡(0.00∘)=73.5 NF(0.00^\circ) = \frac{1}{2}(15.0)(9.80)\cos(0.00^\circ) = 73.5\text{ N}

    Your arithmetic is consistent with your formula, but the result is twice the true value due to the center-of-mass lever arm error.

  4. Step 4

    F=15.0⋅9.80⋅cos⁡(60.0∘)  ⟹  F=147⋅0.500=73.5 NF = 15.0 \cdot 9.80 \cdot \cos(60.0^\circ) \implies F = 147 \cdot 0.500 = 73.5\text{ N}

    Correct

    F(60.0∘)=12(15.0)(9.80)cos⁡(60.0∘)=36.8 NF(60.0^\circ) = \frac{1}{2}(15.0)(9.80)\cos(60.0^\circ) = 36.8\text{ N}

    You correctly evaluated cos⁡(60.0∘)=0.500\cos(60.0^\circ) = 0.500, but the propagated factor of 2 leads to 73.5 N73.5\text{ N} instead of 36.8 N36.8\text{ N}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the applied force acts at distance ww perpendicular to the door.

You correctly determined that the gravitational lever arm depends on cos⁡θ\cos\theta.

You correctly applied static equilibrium by equating the clockwise and counterclockwise torques.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wrong lever arm for gravity

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed the weight of the door acts at the outer edge at distance ww rather than at the center of mass at w2\frac{w}{2}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Point of Action for Gravity
  • The gravitational force on a uniform rigid body acts at its center of mass, which is located at its geometric center.

  • Locate the center of mass along the body (rcm=w2r_{\text{cm}} = \frac{w}{2}) before calculating the gravitational torque about the hinge.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set τgravity=mg(w2)cos⁡θ\tau_{\text{gravity}} = mg \left(\frac{w}{2}\right) \cos\theta.

  2. Balance torques about the hinge: F⋅w=12mgwcos⁡θF \cdot w = \frac{1}{2}mgw\cos\theta, which simplifies to F(θ)=12mgcos⁡θF(\theta) = \frac{1}{2}mg\cos\theta.

  3. Substitute θ=0.00∘\theta = 0.00^\circ: F(0.00∘)=12(15.0)(9.80)(1.000)=73.5 NF(0.00^\circ) = \frac{1}{2}(15.0)(9.80)(1.000) = 73.5\text{ N}.

  4. Substitute θ=60.0∘\theta = 60.0^\circ: F(60.0∘)=12(15.0)(9.80)(0.500)=36.75 N≈36.8 NF(60.0^\circ) = \frac{1}{2}(15.0)(9.80)(0.500) = 36.75\text{ N} \approx 36.8\text{ N}.

Final answer

F(0.00∘)=73.5 NF(0.00^\circ) = 73.5\text{ N}, F(60.0∘)=36.8 NF(60.0^\circ) = 36.8\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always sketch the pivot, center of mass, and point of application of each external force before writing torque expressions.

  • Check that uniform objects have their weight positioned at r=L2r = \frac{L}{2} from the hinged end.

Lock it in

Similar question

01

A uniform rod of mass 4.00 kg4.00\text{ kg} and length 1.20 m1.20\text{ m} is hinged at one end and held at an angle of 30.0∘30.0^\circ above the horizontal. Find the torque exerted by gravity about the hinge. (g=9.80 m/s2g = 9.80\text{ m/s}^2)

Answer

τg=20.4 N⋅m\tau_g = 20.4\text{ N}\cdot\text{m}. Key steps: Identify center of mass distance r=L2=0.600 mr = \frac{L}{2} = 0.600\text{ m}. Lever arm is r⊥=rcos⁡(30.0∘)=0.600⋅0.8660=0.5196 mr_\perp = r\cos(30.0^\circ) = 0.600 \cdot 0.8660 = 0.5196\text{ m}. Torque is τg=mgr⊥=(4.00)(9.80)(0.5196)≈20.4 N⋅m\tau_g = mg r_\perp = (4.00)(9.80)(0.5196) \approx 20.4\text{ N}\cdot\text{m}.

02

A uniform hatch of mass 20.0 kg20.0\text{ kg} and length 1.00 m1.00\text{ m} is hinged on one side. A rope pulls vertically upward on the free end. At what opening angle θ\theta above the horizontal is the tension in the rope equal to half the hatch's weight? (0∘≤θ<90∘0^\circ \le \theta < 90^\circ)

Answer

At all angles 0∘≤θ<90∘0^\circ \le \theta < 90^\circ. Key steps: Both the tension TT and gravity mgmg act vertically, so both lever arms share the factor cos⁡θ\cos\theta: T⋅Lcos⁡θ=mg(L2)cos⁡θT \cdot L\cos\theta = mg\left(\frac{L}{2}\right)\cos\theta. The cos⁡θ\cos\theta and LL cancel out, giving T=12mgT = \frac{1}{2}mg independent of θ\theta.

03

A uniform beam of length L=4.00 mL = 4.00\text{ m} and mass M=60.0 kgM = 60.0\text{ kg} is hinged at the ground and inclined at θ=37.0∘\theta = 37.0^\circ above the horizontal. A horizontal cable attached to the top end holds it in equilibrium. Determine the tension TT in the cable. (Use sin⁡(37.0∘)=0.600\sin(37.0^\circ) = 0.600, cos⁡(37.0∘)=0.800\cos(37.0^\circ) = 0.800, g=9.80 m/s2g = 9.80\text{ m/s}^2)

Answer

T=392 NT = 392\text{ N}. Key steps: Lever arm for vertical gravity is L2cos⁡(37.0∘)\frac{L}{2}\cos(37.0^\circ); lever arm for horizontal tension is Lsin⁡(37.0∘)L\sin(37.0^\circ). Setting net torque to zero: T⋅Lsin⁡(37.0∘)=Mg(L2)cos⁡(37.0∘)  ⟹  T=12Mgcot⁡(37.0∘)=12(60.0)(9.80)(0.8000.600)=294⋅43=392 NT \cdot L\sin(37.0^\circ) = Mg\left(\frac{L}{2}\right)\cos(37.0^\circ) \implies T = \frac{1}{2}Mg\cot(37.0^\circ) = \frac{1}{2}(60.0)(9.80)\left(\frac{0.800}{0.600}\right) = 294 \cdot \frac{4}{3} = 392\text{ N}.

Loading workspace…