Resources

A package of mass m1=3.00 kgm_1 = 3.00\text{ kg} on a frictionless horizontal tabletop is connected via a light string over a frictionless pulley at the table edge to a suspended ball of mass m2=2.00 kgm_2 = 2.00\text{ kg}. The suspended ball is initially held at a height h=0.800 mh = 0.800\text{ m} above the floor, and the system is released from rest. When m2m_2 strikes the floor, the string goes slack, and m1m_1 immediately enters a rough section of the horizontal table where the coefficient of kinetic friction is μk=0.350\mu_k = 0.350. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate: (a) the speed of the blocks just before m2m_2 hits the floor, and (b) the additional distance dd that m1m_1 slides along the rough patch before coming to rest.

Answer and steps

Final answer

(a) v=2.50 m/sv = 2.50\text{ m/s}; (b) d=0.914 md = 0.914\text{ m}

Steps

Part (a): Speed Before m2m_2 Hits the Floor

During the first phase of motion, the system is released from rest and accelerates together under the pull of gravity on m2m_2. Because the tabletop and pulley are frictionless and the string is light and inextensible, both blocks experience the same magnitude of acceleration aa.

  1. Find the acceleration of the combined system: Applying Newton's second law to the two-body system along the direction of motion: Fnet=m2g=(m1+m2)aF_{\text{net}} = m_2 g = (m_1 + m_2) a

    Solving for the acceleration aa: a=m2gm1+m2=(2.00 kg)(9.80 m/s2)3.00 kg+2.00 kg=19.60 N5.00 kg=3.92 m/s2a = \frac{m_2 g}{m_1 + m_2} = \frac{(2.00\text{ kg})(9.80\text{ m/s}^2)}{3.00\text{ kg} + 2.00\text{ kg}} = \frac{19.60\text{ N}}{5.00\text{ kg}} = 3.92\text{ m/s}^2

  2. Calculate the final speed using kinematics: The suspended mass falls through a vertical distance h=0.800 mh = 0.800\text{ m} from rest (v0=0 m/sv_0 = 0\text{ m/s}): v2=v02+2ah=0+2(3.92 m/s2)(0.800 m)=6.272 m2/s2v^2 = v_0^2 + 2ah = 0 + 2(3.92\text{ m/s}^2)(0.800\text{ m}) = 6.272\text{ m}^2/\text{s}^2 v=6.272 m2/s2≈2.50 m/sv = \sqrt{6.272\text{ m}^2/\text{s}^2} \approx 2.50\text{ m/s}

(Alternative method: Using conservation of mechanical energy, m2gh=12(m1+m2)v2m_2 g h = \frac{1}{2}(m_1 + m_2)v^2, which yields the identical result.)


Part (b): Additional Sliding Distance of m1m_1

Once m2m_2 strikes the floor, the string goes slack, providing zero tension (T=0 NT = 0\text{ N}). Block m1m_1 enters the rough section alone with an initial horizontal speed of v=6.272 m/s≈2.50 m/sv = \sqrt{6.272}\text{ m/s} \approx 2.50\text{ m/s}.

  1. Determine the friction force and deceleration: The normal force on m1m_1 is: N=m1gN = m_1 g The kinetic friction force opposing the motion is: fk=μkN=μkm1gf_k = \mu_k N = \mu_k m_1 g

    Applying Newton's second law horizontally to m1m_1: −fk=m1a1  ⟹  a1=−μkg=−(0.350)(9.80 m/s2)=−3.43 m/s2-f_k = m_1 a_1 \implies a_1 = -\mu_k g = -(0.350)(9.80\text{ m/s}^2) = -3.43\text{ m/s}^2

  2. Compute the stopping distance dd: Using the work-energy theorem, the work done by kinetic friction reduces the kinetic energy of m1m_1 to zero: Wfriction=ΔKW_{\text{friction}} = \Delta K −fkd=0−12m1v2-f_k d = 0 - \frac{1}{2}m_1 v^2 μkm1gd=12m1v2\mu_k m_1 g d = \frac{1}{2} m_1 v^2

    Solving for dd: d=v22μkg=6.272 m2/s22(0.350)(9.80 m/s2)=6.2726.86 m≈0.914 md = \frac{v^2}{2\mu_k g} = \frac{6.272\text{ m}^2/\text{s}^2}{2(0.350)(9.80\text{ m/s}^2)} = \frac{6.272}{6.86}\text{ m} \approx 0.914\text{ m}

Common pitfall: Do not include m2m_2 in the second phase. Once m2m_2 is resting on the floor, the string no longer pulls on m1m_1, so only the inertia and friction of m1m_1 determine its stopping distance.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that the potential energy lost by m₂ accelerates both masses together, equating m₂gh to only (1/2)m₂v².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m2gh=12m2v2  ⟹  v=2gh=15.68≈3.96 m/sm_2gh = \frac{1}{2}m_2v^2 \implies v = \sqrt{2gh} = \sqrt{15.68} \approx 3.96\text{ m/s}

    Correct

    m2gh=12(m1+m2)v2  ⟹  v=2m2ghm1+m2=6.272≈2.50 m/sm_2gh = \frac{1}{2}(m_1 + m_2)v^2 \implies v = \sqrt{\frac{2m_2gh}{m_1 + m_2}} = \sqrt{6.272} \approx 2.50\text{ m/s}

    Because m1m_1 and m2m_2 are connected by a taut, inextensible string, they move with the same speed. The loss in gravitational potential energy of m2m_2 is shared between both masses as kinetic energy.

  2. Step 2

    12m1v2=μkm1gd  ⟹  d=v22μkg=15.682(0.350)(9.80)=15.686.86≈2.29 m\frac{1}{2}m_1v^2 = \mu_k m_1 g d \implies d = \frac{v^2}{2\mu_k g} = \frac{15.68}{2(0.350)(9.80)} = \frac{15.68}{6.86} \approx 2.29\text{ m}

    Correct

    d=v22μkg=6.2722(0.350)(9.80)=6.2726.86≈0.914 md = \frac{v^2}{2\mu_k g} = \frac{6.272}{2(0.350)(9.80)} = \frac{6.272}{6.86} \approx 0.914\text{ m}

    Your algebraic formula for the stopping distance d=v22μkgd = \frac{v^2}{2\mu_k g} is completely correct. Your numerical result is altered only because it inherited the incorrect value of v2v^2 from part (a).

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that mechanical energy is conserved during the frictionless fall phase.

You correctly treated m1m_1 as moving independently once the string went slack.

You set up the correct work-energy equation equating kinetic energy to friction work on the rough table.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Connected Inertia in System Kinetic Energy

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You analyzed the falling mass m2m_2 as if it were in free fall rather than coupled to m1m_1, neglecting the inertia of the connected mass on the table.

REASONING PATH
Your ACEpath teacher’s suggested approach
System Boundary Check
  • When objects are connected by a taut string, any change in gravitational potential energy alters the kinetic energy of all moving parts: ΔUsys+ΔKsys=0\Delta U_{\text{sys}} + \Delta K_{\text{sys}} = 0.

  • Always write Ktotal=12(m1+m2)v2K_{\text{total}} = \frac{1}{2}(m_1 + m_2)v^2 for two masses tied together and moving at the same speed.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include both masses in the total kinetic energy of the system: m2gh=12(m1+m2)v2m_2gh = \frac{1}{2}(m_1 + m_2)v^2.

  2. Substitute the given values: (2.00)(9.80)(0.800)=12(3.00+2.00)v2  ⟹  15.68=2.50v2(2.00)(9.80)(0.800) = \frac{1}{2}(3.00 + 2.00)v^2 \implies 15.68 = 2.50 v^2.

  3. Solve for the speed just before impact: v2=6.272 m2/s2  ⟹  v≈2.50 m/sv^2 = 6.272\text{ m}^2/\text{s}^2 \implies v \approx 2.50\text{ m/s}.

  4. Substitute v2=6.272 m2/s2v^2 = 6.272\text{ m}^2/\text{s}^2 into your correct formula for stopping distance: d=6.2722(0.350)(9.80)=6.2726.86≈0.914 md = \frac{6.272}{2(0.350)(9.80)} = \frac{6.272}{6.86} \approx 0.914\text{ m}.

Final answer

(a) v=2.50 m/sv = 2.50\text{ m/s}; (b) d=0.914 md = 0.914\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before setting up energy conservation, circle all bodies in the system that are linked and moving.

  • Verify connected problems with Newton's second law (a=Fnetmtotala = \frac{F_{\text{net}}}{m_{\text{total}}}) to ensure your effective mass includes all moving objects.

OverviewACEpath Teacher's Diagnosis

02 The student includes total mass (m₁ + m₂) instead of only m₁ when calculating the normal and frictional force on the horizontal table in part (b).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m2gh=(12)(m1+m2)v2  ⟹  (2.00)(9.80)(0.800)=(12)(3.00+2.00)v2  ⟹  15.68=2.50v2  ⟹  v=6.272≈2.50 m/sm_2gh = \left(\frac{1}{2}\right)(m_1 + m_2)v^2 \implies (2.00)(9.80)(0.800) = \left(\frac{1}{2}\right)(3.00 + 2.00)v^2 \implies 15.68 = 2.50v^2 \implies v = \sqrt{6.272} \approx 2.50\text{ m/s}

  2. Step 2

    (12)m1v2=μk(m1+m2)gd  ⟹  (12)(3.00)(6.272)=(0.350)(5.00)(9.80)d\left(\frac{1}{2}\right)m_1v^2 = \mu_k(m_1 + m_2)gd \implies \left(\frac{1}{2}\right)(3.00)(6.272) = (0.350)(5.00)(9.80)d

    Correct

    12m1v2=fkd=μkm1gd  ⟹  12(3.00)(6.272)=(0.350)(3.00)(9.80)d\frac{1}{2}m_1v^2 = f_k d = \mu_k m_1 g d \implies \frac{1}{2}(3.00)(6.272) = (0.350)(3.00)(9.80)d

    Once mass m2m_2 strikes the floor, the string goes slack (T=0T = 0). Only block m1m_1 is on the table, so the normal force is N=m1gN = m_1 g, not (m1+m2)g(m_1 + m_2)g.

  3. Step 3

    9.408=17.15d  ⟹  d=9.40817.15≈0.549 m9.408 = 17.15d \implies d = \frac{9.408}{17.15} \approx 0.549\text{ m}

    Correct

    9.408=10.29d  ⟹  d=6.2722(0.350)(9.80)≈0.914 m9.408 = 10.29d \implies d = \frac{6.272}{2(0.350)(9.80)} \approx 0.914\text{ m}

    Your algebra is consistent with your setup, but the numerical result is affected by the incorrect normal force in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used conservation of mechanical energy for the two-body connected system in part (a).

You recognized that in part (b), the kinetic energy of m1m_1 is dissipated by the work done by friction until the block stops.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect Mass in Normal Force Calculation

false

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the two blocks as a single combined mass on the horizontal surface after m2m_2 hit the ground. Once m2m_2 rests on the floor, the string goes slack, meaning m2m_2 exerts no force on m1m_1, and only m1m_1 presses against the tabletop.

REASONING PATH
Your ACEpath teacher’s suggested approach
System Boundary After Constraint Changes
  • When a string goes slack or an object disconnects, re-evaluate free-body diagrams individually. A supported resting object does not add to the normal force of another object.

  • Draw a separate free-body diagram for m1m_1 alone during the deceleration phase: N1=m1gN_1 = m_1 g, so fk=μkm1gf_k = \mu_k m_1 g.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Equate the initial kinetic energy of block m1m_1 to the work done by kinetic friction: 12m1v2=μkm1gd\frac{1}{2}m_1 v^2 = \mu_k m_1 g d.

  2. Divide both sides by m1m_1: 12v2=μkgd\frac{1}{2}v^2 = \mu_k g d.

  3. Solve for the sliding distance: d=v22μkg=6.272 m2/s22(0.350)(9.80 m/s2)=6.2726.86 m≈0.914 md = \frac{v^2}{2\mu_k g} = \frac{6.272\text{ m}^2/\text{s}^2}{2(0.350)(9.80\text{ m/s}^2)} = \frac{6.272}{6.86}\text{ m} \approx 0.914\text{ m}.

Final answer

(a) v≈2.50 m/sv \approx 2.50\text{ m/s}; (b) d≈0.914 md \approx 0.914\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • When a connected-body problem shifts from coupled motion to independent motion (e.g., impact or string break), always draw a new free-body diagram for each active body.

  • Notice that for a sliding block on a level surface with no vertical external forces, mm cancels in 12mv2=μkmgd\frac{1}{2}mv^2 = \mu_k mgd, making stopping distance independent of mass.

OverviewACEpath Teacher's Diagnosis

03 The student confuses kinetic energy with momentum, writing the work-energy relation as m₁v = μ_k m₁ g d without squaring the velocity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m2gh=12(m1+m2)v2  ⟹  v=2(2.00)(9.80)(0.800)5.00=6.272≈2.50 m/sm_2gh = \frac{1}{2}(m_1 + m_2)v^2 \implies v = \sqrt{\frac{2(2.00)(9.80)(0.800)}{5.00}} = \sqrt{6.272} \approx 2.50\text{ m/s}

  2. Step 2

    m1v=μkm1gd  ⟹  d=vμkgm_1v = \mu_k m_1 g d \implies d = \frac{v}{\mu_k g}

    Correct

    12m1v2=μkm1gd  ⟹  d=v22μkg\frac{1}{2}m_1v^2 = \mu_k m_1 g d \implies d = \frac{v^2}{2\mu_k g}

    You set the linear momentum m1vm_1 v equal to the work done by friction μkm1gd\mu_k m_1 g d. According to the work-energy theorem, the work done by friction equals the change in kinetic energy 12m1v2\frac{1}{2}m_1 v^2, not momentum.

  3. Step 3

    d=2.50(0.350)(9.80)=2.503.43≈0.729 md = \frac{2.50}{(0.350)(9.80)} = \frac{2.50}{3.43} \approx 0.729\text{ m}

    Correct

    d=6.2722(0.350)(9.80)=6.2726.86≈0.914 md = \frac{6.272}{2(0.350)(9.80)} = \frac{6.272}{6.86} \approx 0.914\text{ m}

    Your numerical substitution and arithmetic were carried out cleanly, but the final value was affected by the missing square and factor of 12\frac{1}{2} from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied mechanical energy conservation to the two-mass connected system.

You accurately identified that only m1m_1 moves during the second phase after the string goes slack.

You correctly expressed the force of kinetic friction as fk=μkm1gf_k = \mu_k m_1 g.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing kinetic energy with momentum in work-energy balance

You wrote m1vm_1 v on the left side of your work balance instead of the kinetic energy 12m1v2\frac{1}{2}m_1 v^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the work-energy theorem (W=ΔKW = \Delta K) with an impulse-momentum relationship, leading to dimensional inconsistency where momentum (kg⋅m/s\text{kg}\cdot\text{m/s}) was equated to work (N⋅m=kg⋅m2/s2\text{N}\cdot\text{m} = \text{kg}\cdot\text{m}^2/\text{s}^2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the Work-Energy Theorem
  • Wnet=ΔK=12mvf2−12mvi2W_{\text{net}} = \Delta K = \frac{1}{2}m v_f^2 - \frac{1}{2}m v_i^2

  • Always pair work (F⋅dF \cdot d) with energy units containing v2v^2, never linear momentum mvmv.

Perform a Dimensional Check
  • [Work]=[Force]×[Distance]=M⋅L2/T2[\text{Work}] = [\text{Force}] \times [\text{Distance}] = \text{M}\cdot\text{L}^2/\text{T}^2

  • Notice that [mv]=M⋅L/T[mv] = \text{M}\cdot\text{L}/\text{T}, whereas [μkmgd]=M⋅L2/T2[\mu_k m g d] = \text{M}\cdot\text{L}^2/\text{T}^2; checking units immediately reveals the missing velocity power.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the work-energy theorem to block m1m_1 as it comes to rest: −fkd=0−12m1v2-f_k d = 0 - \frac{1}{2}m_1 v^2

  2. Substitute fk=μkm1gf_k = \mu_k m_1 g: μkm1gd=12m1v2\mu_k m_1 g d = \frac{1}{2}m_1 v^2

  3. Cancel mass m1m_1 and solve for stopping distance dd: d=v22μkgd = \frac{v^2}{2\mu_k g}

  4. Substitute the known values (v2=6.272 m2/s2v^2 = 6.272\text{ m}^2/\text{s}^2, μk=0.350\mu_k = 0.350, g=9.80 m/s2g = 9.80\text{ m/s}^2): d=6.2722(0.350)(9.80)=6.2726.86≈0.914 md = \frac{6.272}{2(0.350)(9.80)} = \frac{6.272}{6.86} \approx 0.914\text{ m}

Final answer

(a) v=2.50 m/sv = 2.50\text{ m/s}; (b) d=0.914 md = 0.914\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check your physical dimensions whenever you relate force and distance: work has units of joules (kg⋅m2/s2\text{kg}\cdot\text{m}^2/\text{s}^2), which corresponds to 12mv2\frac{1}{2}mv^2, not mvmv.

  • Remember that friction acting over distance alters kinetic energy (W=fdW = f d), while friction acting over time alters momentum (J=fΔtJ = f \Delta t).

Lock it in

Similar question

01

A 4.0 kg4.0\text{ kg} block on a frictionless horizontal surface is attached to a hanging 1.0 kg1.0\text{ kg} mass via a light string and frictionless pulley. If the system is released from rest and the hanging mass falls 0.50 m0.50\text{ m}, find the speed of the blocks just before impact. (Use g=9.8 m/s2g = 9.8\text{ m/s}^2.)

Answer

v=1.4 m/sv = 1.4\text{ m/s}. Using energy conservation: m2gh=12(m1+m2)v2  ⟹  (1.0)(9.8)(0.50)=12(5.0)v2  ⟹  4.9=2.5v2  ⟹  v=1.96=1.4 m/sm_2gh = \frac{1}{2}(m_1 + m_2)v^2 \implies (1.0)(9.8)(0.50) = \frac{1}{2}(5.0)v^2 \implies 4.9 = 2.5v^2 \implies v = \sqrt{1.96} = 1.4\text{ m/s}.

02

A 2.0 kg2.0\text{ kg} cart on a frictionless table is connected to a hanging 3.0 kg3.0\text{ kg} mass. The system is released from rest, and the hanging mass falls 1.2 m1.2\text{ m} to the floor. Upon hitting the floor, the string goes slack and the cart encounters a rough surface with μk=0.40\mu_k = 0.40. Calculate the total distance the cart slides on the rough surface before stopping. (Use g=9.8 m/s2g = 9.8\text{ m/s}^2.)

Answer

d=1.8 md = 1.8\text{ m}. Phase 1: m2gh=12(m1+m2)v2  ⟹  (3.0)(9.8)(1.2)=12(5.0)v2  ⟹  v2=14.112 m2/s2m_2gh = \frac{1}{2}(m_1 + m_2)v^2 \implies (3.0)(9.8)(1.2) = \frac{1}{2}(5.0)v^2 \implies v^2 = 14.112\text{ m}^2/\text{s}^2. Phase 2: 12m1v2=μkm1gd  ⟹  d=v22μkg=14.1122(0.40)(9.8)=1.8 m\frac{1}{2}m_1v^2 = \mu_k m_1 g d \implies d = \frac{v^2}{2\mu_k g} = \frac{14.112}{2(0.40)(9.8)} = 1.8\text{ m}.

03

A block of mass m1=2.0 kgm_1 = 2.0\text{ kg} sits on a 30∘30^\circ frictionless incline and is connected by a string over a pulley to a hanging mass m2=4.0 kgm_2 = 4.0\text{ kg}. The system is released from rest. When m2m_2 descends a distance h=1.0 mh = 1.0\text{ m}, what is the common speed of the blocks? (Use g=9.8 m/s2g = 9.8\text{ m/s}^2.)

Answer

v=3.13 m/sv = 3.13\text{ m/s}. Net potential energy lost: ΔU=m2gh−m1ghsin⁡(30∘)=(4.0)(9.8)(1.0)−(2.0)(9.8)(1.0)(0.5)=39.2−9.8=29.4 J\Delta U = m_2gh - m_1gh\sin(30^\circ) = (4.0)(9.8)(1.0) - (2.0)(9.8)(1.0)(0.5) = 39.2 - 9.8 = 29.4\text{ J}. Equating to total kinetic energy: 29.4=12(m1+m2)v2=12(6.0)v2=3.0v2  ⟹  v=9.8≈3.13 m/s29.4 = \frac{1}{2}(m_1 + m_2)v^2 = \frac{1}{2}(6.0)v^2 = 3.0v^2 \implies v = \sqrt{9.8} \approx 3.13\text{ m/s}.

Loading workspace…