Resources

A block of mass m=8.50 kgm = 8.50\text{ kg} slides along a flat horizontal table under the action of three applied horizontal forces: F⃗1=26.0 N\vec{F}_1 = 26.0\text{ N} directed due East, F⃗2=34.0 N\vec{F}_2 = 34.0\text{ N} directed due North, and a third force F⃗3\vec{F}_3 of magnitude 40.0 N40.0\text{ N} directed at an unknown angle θ\theta south of West. If the net horizontal force acting on the block must point purely in the negative yy-direction (due South), calculate the required angle θ\theta and the resulting magnitude of the net horizontal force.

Answer and steps

Final answer

θ=49.5∘\theta = 49.5^\circ, ∥F⃗net∥=3.58 N\Vert\vec{F}_{\text{net}}\Vert = 3.58\text{ N}

Steps

01

Set Up the Coordinate System

Define standard Cartesian coordinates on the horizontal plane:

  • The positive xx-axis points East.
  • The positive yy-axis points North.
  • The negative xx-axis points West.
  • The negative yy-axis points South.

Write each applied horizontal force in component form:

  • F⃗1=(26.0 N) i^+(0 N) j^\vec{F}_1 = (26.0\text{ N})\,\hat{i} + (0\text{ N})\,\hat{j}
  • F⃗2=(0 N) i^+(34.0 N) j^\vec{F}_2 = (0\text{ N})\,\hat{i} + (34.0\text{ N})\,\hat{j}
  • F⃗3\vec{F}_3, being directed at an angle θ\theta south of West, has components in the negative xx- and negative yy-directions: F⃗3=(−40.0cos⁡θ) i^+(−40.0sin⁡θ) j^\vec{F}_3 = (-40.0\cos\theta)\,\hat{i} + (-40.0\sin\theta)\,\hat{j}

02

Determine the Angle θ\theta from the xx-Component

The net force is given by the vector sum: F⃗net=F⃗1+F⃗2+F⃗3\vec{F}_{\text{net}} = \vec{F}_1 + \vec{F}_2 + \vec{F}_3

Because the net horizontal force has no East-West component (Fnet,x=0F_{\text{net}, x} = 0): F1x+F2x+F3x=0F_{1x} + F_{2x} + F_{3x} = 0 26.0−40.0cos⁡θ=026.0 - 40.0\cos\theta = 0

Solving for cos⁡θ\cos\theta: cos⁡θ=26.040.0=0.650\cos\theta = \frac{26.0}{40.0} = 0.650 θ=arccos⁡(0.650)≈49.46∘≈49.5∘\theta = \arccos(0.650) \approx 49.46^\circ \approx 49.5^\circ


03

Calculate the Magnitude of the Net Force

Now compute the net force along the yy-axis using θ≈49.5∘\theta \approx 49.5^\circ: Fnet,y=F1y+F2y+F3yF_{\text{net}, y} = F_{1y} + F_{2y} + F_{3y} Fnet,y=0+34.0−40.0sin⁡(49.5∘)F_{\text{net}, y} = 0 + 34.0 - 40.0\sin(49.5^\circ)

Evaluate the vertical component of F⃗3\vec{F}_3: 40.0sin⁡(49.5∘)≈40.0⋅0.7604=30.42 N40.0\sin(49.5^\circ) \approx 40.0 \cdot 0.7604 = 30.42\text{ N}

Subtracting the components: ∣Fnet,y∣=∣34.0−30.42∣ N=3.58 N|F_{\text{net}, y}| = |34.0 - 30.42|\text{ N} = 3.58\text{ N}

Since the horizontal xx-component is zero, the magnitude of the net force is simply: ∥F⃗net∥=3.58 N\|\vec{F}_{\text{net}}\| = 3.58\text{ N}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student swaps sine and cosine when resolving the components of F_3 relative to the horizontal axis.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Fnet,x=F1−F3sin⁡(θ)=0  ⟹  26.0−40.0sin⁡(θ)=0  ⟹  sin⁡(θ)=26.040.0=0.65  ⟹  θ=arcsin⁡(0.65)≈40.5∘F_{\text{net},x} = F_1 - F_3 \sin(\theta) = 0 \implies 26.0 - 40.0 \sin(\theta) = 0 \implies \sin(\theta) = \frac{26.0}{40.0} = 0.65 \implies \theta = \arcsin(0.65) \approx 40.5^\circ

    Correct

    Fnet,x=F1−F3cos⁡(θ)=0  ⟹  26.0−40.0cos⁡(θ)=0  ⟹  cos⁡(θ)=26.040.0=0.65  ⟹  θ=arccos⁡(0.65)≈49.5∘F_{\text{net},x} = F_1 - F_3 \cos(\theta) = 0 \implies 26.0 - 40.0 \cos(\theta) = 0 \implies \cos(\theta) = \frac{26.0}{40.0} = 0.65 \implies \theta = \arccos(0.65) \approx 49.5^\circ

    Because θ\theta is specified as 'south of West', the angle is adjacent to the West (horizontal / xx) axis. Therefore, the horizontal component uses the cosine function, F3x=−F3cos⁡(θ)F_{3x} = -F_3 \cos(\theta), rather than the sine function.

  2. Step 2

    ∣Fnet∣=34.0−40.0cos⁡(40.5∘)=34.0−30.42=3.58 N|F_{\text{net}}| = 34.0 - 40.0 \cos(40.5^\circ) = 34.0 - 30.42 = 3.58\text{ N}

    Correct

    ∥F⃗net∥=∣F2−F3sin⁡(49.5∘)∣=∣34.0−40.0sin⁡(49.5∘)∣=∣34.0−30.42∣ N=3.58 N\|\vec{F}_{\text{net}}\| = |F_2 - F_3 \sin(49.5^\circ)| = |34.0 - 40.0 \sin(49.5^\circ)| = |34.0 - 30.42|\text{ N} = 3.58\text{ N}

    Your calculation of the net force magnitude carried over the swapped trigonometric functions and your complementary angle θ=40.5∘\theta = 40.5^\circ. Because cos⁡(40.5∘)=sin⁡(49.5∘)\cos(40.5^\circ) = \sin(49.5^\circ), your numerical calculation produced 3.58 N3.58\text{ N}, but the formula should correctly use sin⁡(θ)\sin(\theta) for the vertical component with θ=49.5∘\theta = 49.5^\circ.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the horizontal component Fnet,xF_{\text{net},x} must sum to zero.

You correctly isolated the trigonometric ratio and accurately solved for the inverse trigonometric angle.

You set up the net vertical force calculation by subtracting the opposing vertical component from F⃗2\vec{F}_2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Component Swap

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated the horizontal xx-component with sine and the vertical yy-component with cosine, confusing an angle measured 'south of West' (relative to the horizontal axis) with an angle measured 'west of South' (relative to the vertical axis).

REASONING PATH
Your ACEpath teacher’s suggested approach
Reference Axis for Direction Phrases
  • In directional phrasing like 'θ\theta south of West', the second direction ('West') is the reference axis where θ=0∘\theta = 0^\circ.

  • Draw the reference vector along the West axis first, then sweep θ\theta toward the South to confirm that the adjacent side lies along the horizontal xx-axis.

SOH-CAH-TOA Component Assignment
  • The side adjacent to angle θ\theta takes cos⁡(θ)\cos(\theta), while the side opposite to θ\theta takes sin⁡(θ)\sin(\theta).

  • Always sketch a right triangle with components along the axes before writing equations to visually verify which component is adjacent and which is opposite.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set Fnet,x=F1−F3cos⁡(θ)=0F_{\text{net},x} = F_1 - F_3\cos(\theta) = 0.

  2. Substitute the given values: 26.0−40.0cos⁡(θ)=0  ⟹  cos⁡(θ)=26.040.0=0.65026.0 - 40.0\cos(\theta) = 0 \implies \cos(\theta) = \frac{26.0}{40.0} = 0.650.

  3. Solve for the angle: θ=arccos⁡(0.650)≈49.5∘\theta = \arccos(0.650) \approx 49.5^\circ.

  4. Substitute θ=49.5∘\theta = 49.5^\circ into the vertical sum: Fnet,y=F2−F3sin⁡(49.5∘)=34.0−40.0(0.7604)=3.58 NF_{\text{net},y} = F_2 - F_3\sin(49.5^\circ) = 34.0 - 40.0(0.7604) = 3.58\text{ N}.

Final answer

θ=49.5∘\theta = 49.5^\circ, ∥F⃗net∥=3.58 N\|\vec{F}_{\text{net}}\| = 3.58\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch the compass rose and draw the right-triangle components whenever an angle is given with respect to a cardinal direction.

  • Highlight the reference direction in the problem text ('... of [Reference Direction]') to immediately identify the adjacent axis.

OverviewACEpath Teacher's Diagnosis

02 The student enforces equilibrium in the vertical direction instead of setting the net horizontal x-component to zero.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Net force points South, so set Fnet,y=0  ⟹  F2−F3sin⁡(θ)=0\text{Net force points South, so set } F_{\text{net}, y} = 0 \implies F_2 - F_3 \sin(\theta) = 0

    Correct

    Net force points South, so Fnet,x=0  ⟹  F1−F3cos⁡(θ)=0\text{Net force points South, so } F_{\text{net}, x} = 0 \implies F_1 - F_3 \cos(\theta) = 0

    A vector pointing purely South lies along the negative yy-axis, meaning its perpendicular component along the xx-axis must vanish (Fnet,x=0F_{\text{net}, x} = 0). Setting Fnet,y=0F_{\text{net}, y} = 0 forces the net force to have no vertical component at all.

  2. Step 2

    34.0−40.0sin⁡(θ)=0  ⟹  sin⁡(θ)=34.040.0=0.85  ⟹  θ=arcsin⁡(0.85)≈58.2∘34.0 - 40.0\sin(\theta) = 0 \implies \sin(\theta) = \frac{34.0}{40.0} = 0.85 \implies \theta = \arcsin(0.85) \approx 58.2^\circ

    Correct

    26.0−40.0cos⁡(θ)=0  ⟹  cos⁡(θ)=26.040.0=0.650  ⟹  θ=arccos⁡(0.650)≈49.5∘26.0 - 40.0\cos(\theta) = 0 \implies \cos(\theta) = \frac{26.0}{40.0} = 0.650 \implies \theta = \arccos(0.650) \approx 49.5^\circ

    You solved your sine equation correctly, but this angle was derived from the incorrect equilibrium condition.

  3. Step 3

    ∣Fnet∣=∣26.0−40.0cos⁡(58.2∘)∣=∣26.0−21.08∣=4.92 N|F_{\text{net}}| = |26.0 - 40.0\cos(58.2^\circ)| = |26.0 - 21.08| = 4.92\text{ N}

    Correct

    ∥F⃗net∥=∣Fnet,y∣=∣34.0−40.0sin⁡(49.46∘)∣=∣34.0−30.42∣=3.58 N\|\vec{F}_{\text{net}}\| = |F_{\text{net}, y}| = |34.0 - 40.0\sin(49.46^\circ)| = |34.0 - 30.42| = 3.58\text{ N}

    Because the net force points due South, its magnitude equals ∣Fnet,y∣|F_{\text{net}, y}|, not ∣Fnet,x∣|F_{\text{net}, x}|. Evaluating along the yy-axis with θ≈49.5∘\theta \approx 49.5^\circ yields 3.58 N3.58\text{ N}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that F⃗3\vec{F}_3 has trigonometric components involving sine and cosine for an angle directed south of West.

You performed the algebraic isolation and inverse trigonometric evaluation accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Directional Component Confusion

You set the component parallel to the desired net direction to zero instead of setting the perpendicular component to zero.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing a vector's non-zero directional axis with the condition for zero component: if a vector points purely along ±y\pm y, its xx-component is zero and its yy-component is non-zero.

REASONING PATH
Your ACEpath teacher’s suggested approach
Purely Directional Vectors
  • If a vector points entirely along a coordinate axis, its component along the perpendicular axis equals zero.

  • Always write out both component equations (Fnet,xF_{\text{net}, x} and Fnet,yF_{\text{net}, y}) before deciding which one is zero.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Require the East-West component to vanish: Fnet,x=F1−F3cos⁡θ=0F_{\text{net}, x} = F_1 - F_3\cos\theta = 0.

  2. Solve for the angle: cos⁡θ=26.040.0=0.650  ⟹  θ=arccos⁡(0.650)≈49.46∘≈49.5∘\cos\theta = \frac{26.0}{40.0} = 0.650 \implies \theta = \arccos(0.650) \approx 49.46^\circ \approx 49.5^\circ.

  3. Find the net force along the yy-axis: Fnet,y=F2−F3sin⁡(49.46∘)=34.0−40.0(0.7600)=3.60 NF_{\text{net}, y} = F_2 - F_3\sin(49.46^\circ) = 34.0 - 40.0(0.7600) = 3.60\text{ N} (or 3.58 N3.58\text{ N} using 49.46∘49.46^\circ precision).

Final answer

θ≈49.5∘\theta \approx 49.5^\circ, ∥F⃗net∥=3.58 N\|\vec{F}_{\text{net}}\| = 3.58\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch the Cartesian axes and draw the desired resultant vector first to see clearly which axis has zero projection.

  • Practice setting up constraint equations for vectors constrained along an axis before solving for unknown angles.

OverviewACEpath Teacher's Diagnosis

03 The student adds the vertical component of F_3 to F_2 instead of subtracting it when finding the net vertical force.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    F_{net\text{net},x} = F_1 - F_3 ⋅\cdot \cos(θ\theta) = 0   ⟹  \implies 26.0 - 40.0 ⋅\cdot \cos(θ\theta) = 0   ⟹  \implies \cos(θ\theta) = 26.040.0\frac{26.0}{40.0} = 0.65   ⟹  \implies θ\theta = \arccos(0.65) ≈\approx 49.5^∘\circ_

  2. Step 2

    F_{net\text{net},y} = F_2 + F_3 ⋅\cdot \sin(49.5^∘\circ)   ⟹  \implies |F_{net\text{net}}| = 34.0 + 40.0 ⋅\cdot \sin(49.5^∘\circ) = 34.0 + 30.42 = 64.42 N\text{ N}

    Correct

    F_{net\text{net},y} = F_2 - F_3\sin(49.5^∘\circ) = 34.0 - 40.0\sin(49.5^∘\circ) = 34.0 - 30.42 = 3.58 N\text{ N}   ⟹  \implies \VertF⃗\vec{F}_{net\text{net}}\Vert = 3.58 N\text{ N}

    Because F⃗3\vec{F}_3 points south of West, its vertical component is directed South (negative yy-direction), opposing F⃗2\vec{F}_2 which points North. You should subtract this component rather than add it.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set the sum of the horizontal force components to zero.

You accurately solved for the angle θ≈49.5∘\theta \approx 49.5^\circ.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in vector component

You used a plus sign instead of a minus sign for the vertical component of F⃗3\vec{F}_3.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You did not account for the directional sense along the yy-axis: since F⃗2\vec{F}_2 points North (+y+y) and F⃗3\vec{F}_3 is directed south of West (−y-y), their vertical components have opposite signs and must oppose each other.

REASONING PATH
Your ACEpath teacher’s suggested approach
Establish Axis Signs
  • Components pointing in opposite directions along an axis must have opposite algebraic signs (e.g., North is positive, South is negative).

  • Always sketch each vector on a Cartesian grid and write out Fy=−Fsin⁡θF_y = -F\sin\theta explicitly whenever a vector points in the negative direction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify vertical directions: F⃗2\vec{F}_2 acts North (+34.0 N+34.0\text{ N}) and F⃗3\vec{F}_3 has a component acting South (−40.0sin⁡(49.5∘) N-40.0\sin(49.5^\circ)\text{ N}).

  2. Calculate the net vertical component: Fnet,y=34.0 N−40.0sin⁡(49.5∘) N≈34.0−30.42=3.58 NF_{\text{net}, y} = 34.0\text{ N} - 40.0\sin(49.5^\circ)\text{ N} \approx 34.0 - 30.42 = 3.58\text{ N}.

  3. Find the magnitude: since Fnet,x=0F_{\text{net}, x} = 0, ∥F⃗net∥=∣Fnet,y∣=3.58 N\Vert\vec{F}_{\text{net}}\Vert = |F_{\text{net}, y}| = 3.58\text{ N}.

Final answer

θ=49.5∘\theta = 49.5^\circ, ∥F⃗net∥=3.58 N\Vert\vec{F}_{\text{net}}\Vert = 3.58\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a quick free-body diagram showing arrow directions along the axes before writing algebraic sums.

  • Double-check that directional keywords like 'south' or 'west' translate directly to negative signs in standard Cartesian coordinates.

Lock it in

Similar question

01

A box is pulled by a force T⃗=60.0 N\vec{T} = 60.0\text{ N} directed at an angle of 35.0∘35.0^\circ north of East. What are the horizontal (xx) and vertical (yy) components of this tension force?

Answer

Tx=49.1 NT_x = 49.1\text{ N}, Ty=34.4 NT_y = 34.4\text{ N}. Key step: The angle is measured from East (horizontal), so Tx=60.0cos⁡(35.0∘)≈49.1 NT_x = 60.0\cos(35.0^\circ) \approx 49.1\text{ N} and Ty=60.0sin⁡(35.0∘)≈34.4 NT_y = 60.0\sin(35.0^\circ) \approx 34.4\text{ N}.

02

A sled on a horizontal frozen pond is acted on by two forces: F⃗1=45.0 N\vec{F}_1 = 45.0\text{ N} directed due North, and F⃗2=75.0 N\vec{F}_2 = 75.0\text{ N} directed at an angle ϕ\phi west of South. If the net force has no North-South component (Fnet,y=0F_{\text{net},y} = 0), find the angle ϕ\phi and the resulting magnitude of the net force.

Answer

ϕ=53.1∘\phi = 53.1^\circ, ∥F⃗net∥=60.0 N\|\vec{F}_{\text{net}}\| = 60.0\text{ N}. Key step: Since ϕ\phi is measured 'west of South', South (vertical) is the adjacent axis. Thus, F2y=−75.0cos⁡ϕF_{2y} = -75.0\cos\phi. Setting Fnet,y=45.0−75.0cos⁡ϕ=0F_{\text{net},y} = 45.0 - 75.0\cos\phi = 0 yields cos⁡ϕ=0.600  ⟹  ϕ=53.1∘\cos\phi = 0.600 \implies \phi = 53.1^\circ. The net horizontal force is Fnet,x=−75.0sin⁡(53.1∘)=−60.0 NF_{\text{net},x} = -75.0\sin(53.1^\circ) = -60.0\text{ N}, giving magnitude 60.0 N60.0\text{ N}.

03

An object on a flat table is subjected to three coplanar horizontal forces: F⃗1=18.0 N\vec{F}_1 = 18.0\text{ N} due East, F⃗2=24.0 N\vec{F}_2 = 24.0\text{ N} due South, and F⃗3=30.0 N\vec{F}_3 = 30.0\text{ N} directed at an angle α\alpha north of West. Determine the angle α\alpha such that the net force points entirely in the vertical direction, and find the resulting net force vector in component form.

Answer

α=53.1∘\alpha = 53.1^\circ, F⃗net=0 i^+0 j^\vec{F}_{\text{net}} = 0\,\hat{i} + 0\,\hat{j} (equilibrium). Key step: Zero net horizontal force requires F1x+F3x=18.0−30.0cos⁡α=0  ⟹  cos⁡α=0.600  ⟹  α=53.13∘F_{1x} + F_{3x} = 18.0 - 30.0\cos\alpha = 0 \implies \cos\alpha = 0.600 \implies \alpha = 53.13^\circ. Then along the vertical axis, Fnet,y=−24.0+30.0sin⁡(53.13∘)=−24.0+24.0=0 NF_{\text{net},y} = -24.0 + 30.0\sin(53.13^\circ) = -24.0 + 24.0 = 0\text{ N}.

Loading workspace…