Resources

A research probe is launched vertically upward from the surface of an airless moon where the local gravitational acceleration is a constant gmoon=1.60 m/s2g_{\text{moon}} = 1.60\text{ m/s}^2 directed downward. The probe is fired with an initial vertical velocity of +32.0 m/s+32.0\text{ m/s} (defining upward as the positive yy-direction). Taking into account the directional sign conventions for displacement and acceleration, calculate the probe's velocity and displacement Δy\Delta y exactly 30.0 s30.0\text{ s} after launch.

Answer and steps

Final answer

v=−16.0 m/sv = -16.0\text{ m/s}, Δy=+240 m\Delta y = +240\text{ m}

Steps

01

Identify the Given Quantities and Coordinate System

Define the upward vertical direction as positive (+y+y).

  • Initial velocity: v0=+32.0 m/sv_0 = +32.0\text{ m/s}
  • Acceleration: Since gravity acts downward, a=−gmoon=−1.60 m/s2a = -g_{\text{moon}} = -1.60\text{ m/s}^2
  • Elapsed time: t=30.0 st = 30.0\text{ s}

02

Calculate the Final Velocity

For motion with constant acceleration, velocity as a function of time is given by:

v=v0+atv = v_0 + at

Substitute the known values into the equation:

v=32.0 m/s+(−1.60 m/s2)(30.0 s)v = 32.0\text{ m/s} + (-1.60\text{ m/s}^2)(30.0\text{ s}) v=32.0 m/s−48.0 m/s=−16.0 m/sv = 32.0\text{ m/s} - 48.0\text{ m/s} = -16.0\text{ m/s}

The negative sign indicates that the probe has already reached its peak height and is now moving downward at 16.0 m/s16.0\text{ m/s}.


03

Calculate the Vertical Displacement

Displacement under constant acceleration is determined by:

Δy=v0t+12at2\Delta y = v_0 t + \frac{1}{2}at^2

Substitute the known values:

Δy=(32.0 m/s)(30.0 s)+12(−1.60 m/s2)(30.0 s)2\Delta y = (32.0\text{ m/s})(30.0\text{ s}) + \frac{1}{2}(-1.60\text{ m/s}^2)(30.0\text{ s})^2 Δy=960 m−0.80(900) m\Delta y = 960\text{ m} - 0.80(900)\text{ m} Δy=960 m−720 m=+240 m\Delta y = 960\text{ m} - 720\text{ m} = +240\text{ m}

The positive sign indicates that the probe is located 240 m240\text{ m} above the initial launch position.


Common Pitfall to Avoid

Do not confuse displacement (Δy\Delta y) with total distance traveled. The probe reaches its peak at t=v0g=32.01.60=20.0 st = \frac{v_0}{g} = \frac{32.0}{1.60} = 20.0\text{ s}, reaching a maximum height of 320 m320\text{ m}, and then falls downward for 10.0 s10.0\text{ s}. The kinematic formula directly yields the net change in position (Δy=+240 m\Delta y = +240\text{ m}) from the launch site without needing to calculate the upward and downward distances separately.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats downward gravitational acceleration as positive instead of negative, leading to an incorrect velocity of +80.0 m/s and an incorrect displacement of +1680 m.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v=v0+at  ⟹  v=32.0+(1.60)(30.0)  ⟹  v=32.0+48.0=80.0 m/sv = v_0 + at \implies v = 32.0 + (1.60)(30.0) \implies v = 32.0 + 48.0 = 80.0\text{ m/s}

    Correct

    v=v0+at=32.0 m/s+(−1.60 m/s2)(30.0 s)=−16.0 m/sv = v_0 + at = 32.0\text{ m/s} + (-1.60\text{ m/s}^2)(30.0\text{ s}) = -16.0\text{ m/s}

    Because upward is defined as the positive yy-direction and gravity pulls downward, the acceleration vector must be negative: a=−1.60 m/s2a = -1.60\text{ m/s}^2. Substituting +1.60 m/s2+1.60\text{ m/s}^2 indicates the probe speeds up upward rather than slowing down and reversing direction.

  2. Step 2

    Δy=v0t+(12)at2  ⟹  Δy=(32.0)(30.0)+(12)(1.60)(30.0)2  ⟹  Δy=960+720=1680 m\Delta y = v_0 t + \left(\frac{1}{2}\right)at^2 \implies \Delta y = (32.0)(30.0) + \left(\frac{1}{2}\right)(1.60)(30.0)^2 \implies \Delta y = 960 + 720 = 1680\text{ m}

    Correct

    Δy=v0t+12at2=(32.0 m/s)(30.0 s)+12(−1.60 m/s2)(30.0 s)2=960 m−720 m=+240 m\Delta y = v_0 t + \frac{1}{2}at^2 = (32.0\text{ m/s})(30.0\text{ s}) + \frac{1}{2}(-1.60\text{ m/s}^2)(30.0\text{ s})^2 = 960\text{ m} - 720\text{ m} = +240\text{ m}

    You correctly selected the displacement formula, but repeating the positive sign for aa caused the gravitational displacement term to add to the upward motion instead of subtracting from it.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the standard constant-acceleration kinematic formulas for velocity and displacement.

You accurately computed the products and sums according to your written signs.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention error for acceleration vector

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the magnitude of gravitational acceleration as a positive scalar in both formulas rather than assigning it a negative sign to reflect its downward direction opposite to the positive upward axis.

REASONING PATH
Your ACEpath teacher’s suggested approach
Coordinate Frame Alignment
  • Any vector pointing opposite to the chosen positive axis must carry a negative sign in 1D kinematic equations.

  • Before substituting, write out your given values with explicit signs: v0=+32.0 m/sv_0 = +32.0\text{ m/s} and a=−g=−1.60 m/s2a = -g = -1.60\text{ m/s}^2.

Physical Sanity Check
  • An object launched upward against gravity must slow down, stop at its apex (tpeak=v0g=20.0 st_{\text{peak}} = \frac{v_0}{g} = 20.0\text{ s}), and then fall downward.

  • Check whether your calculated velocity after 20 s20\text{ s} is negative and smaller in magnitude than if it were speeding up continuously.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Define the upward coordinate direction as positive, giving a=−1.60 m/s2a = -1.60\text{ m/s}^2.

  2. Calculate velocity: v=32.0 m/s+(−1.60 m/s2)(30.0 s)=32.0 m/s−48.0 m/s=−16.0 m/sv = 32.0\text{ m/s} + (-1.60\text{ m/s}^2)(30.0\text{ s}) = 32.0\text{ m/s} - 48.0\text{ m/s} = -16.0\text{ m/s}.

  3. Calculate displacement: Δy=(32.0 m/s)(30.0 s)+12(−1.60 m/s2)(30.0 s)2=960 m−720 m=+240 m\Delta y = (32.0\text{ m/s})(30.0\text{ s}) + \frac{1}{2}(-1.60\text{ m/s}^2)(30.0\text{ s})^2 = 960\text{ m} - 720\text{ m} = +240\text{ m}.

Final answer

v=−16.0 m/sv = -16.0\text{ m/s}, Δy=+240 m\Delta y = +240\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down the coordinate axis and attach explicit directional signs (++ or −-) to all vector quantities before doing any algebra.

  • Verify that the sign of acceleration reflects whether gravity opposes or assists the initial motion.

OverviewACEpath Teacher's Diagnosis

02 The student forgets the factor of 1/2 in the kinematic equation for displacement, yielding an incorrect displacement of -480 m.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v=v0+at  ⟹  v=32.0+(−1.60)(30.0)=32.0−48.0=−16.0 m/sv = v_0 + at \implies v = 32.0 + (-1.60)(30.0) = 32.0 - 48.0 = -16.0\text{ m/s}

  2. Step 2

    Δy=v0t+at2  ⟹  Δy=(32.0)(30.0)+(−1.60)(30.0)2  ⟹  Δy=960−1440=−480 m\Delta y = v_0 t + at^2 \implies \Delta y = (32.0)(30.0) + (-1.60)(30.0)^2 \implies \Delta y = 960 - 1440 = -480\text{ m}

    Correct

    Δy=v0t+12at2  ⟹  Δy=(32.0 m/s)(30.0 s)+12(−1.60 m/s2)(30.0 s)2=+240 m\Delta y = v_0 t + \frac{1}{2}at^2 \implies \Delta y = (32.0\text{ m/s})(30.0\text{ s}) + \frac{1}{2}(-1.60\text{ m/s}^2)(30.0\text{ s})^2 = +240\text{ m}

    You omitted the factor of 12\frac{1}{2} in the second term of the displacement equation, writing at2at^2 instead of 12at2\frac{1}{2}at^2.

WHAT YOU DID WELL
Compliments from Your Teacher

You established a clear coordinate system with upward as positive.

You correctly assigned a negative sign to the downward gravitational acceleration.

You accurately solved for the final velocity at t=30.0 st = 30.0\text{ s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing Factor of 1/2 in Kinematic Displacement

You recalled the displacement formula without the factor of 12\frac{1}{2} on the acceleration term.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Incomplete recall of the kinematic position equation under constant acceleration, Δy=v0t+12at2\Delta y = v_0 t + \frac{1}{2}at^2, which originates from integrating linear velocity v(t)=v0+atv(t) = v_0 + at.

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinematic Formula Structure
  • Displacement under constant acceleration is Δy=v0t+12at2\Delta y = v_0 t + \frac{1}{2}at^2.

  • Always verify that the quadratic time term includes the coefficient 12\frac{1}{2} before substituting numerical values.

Average Velocity Check
  • For constant acceleration, Δy=vavgt=v0+v2t\Delta y = v_{\text{avg}} t = \frac{v_0 + v}{2}t.

  • Check your calculated displacement against (32.0+(−16.0)2)(30.0)=(8.0)(30.0)=+240 m\left(\frac{32.0 + (-16.0)}{2}\right)(30.0) = (8.0)(30.0) = +240\text{ m}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the standard kinematic equation including the factor of one-half: Δy=v0t+12at2\Delta y = v_0 t + \frac{1}{2}at^2.

  2. Substitute the given values: Δy=(32.0 m/s)(30.0 s)+12(−1.60 m/s2)(30.0 s)2\Delta y = (32.0\text{ m/s})(30.0\text{ s}) + \frac{1}{2}(-1.60\text{ m/s}^2)(30.0\text{ s})^2.

  3. Evaluate the two terms: Δy=960 m−0.80(900) m=960 m−720 m=+240 m\Delta y = 960\text{ m} - 0.80(900)\text{ m} = 960\text{ m} - 720\text{ m} = +240\text{ m}.

Final answer

v=−16.0 m/sv = -16.0\text{ m/s}, Δy=+240 m\Delta y = +240\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the standard kinematic quartet, paying special attention to coefficients such as 12\frac{1}{2} in Δx=v0t+12at2\Delta x = v_0 t + \frac{1}{2}at^2.

  • Use the alternative displacement relation Δy=(v0+v2)t\Delta y = \left(\frac{v_0 + v}{2}\right)t as an independent sanity check whenever both initial and final velocities are known.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to square the time variable t in the acceleration term of the displacement equation, obtaining an incorrect displacement of +912 m.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v=v0+at  ⟹  v=32.0−(1.60)(30.0)=−16.0 m/sv = v_0 + at \implies v = 32.0 - (1.60)(30.0) = -16.0\text{ m/s}

  2. Step 2

    Δy=v0t+(12)at  ⟹  Δy=(32.0)(30.0)+(12)(−1.60)(30.0)  ⟹  Δy=960−24.0=936 m\Delta y = v_0 t + \left(\frac{1}{2}\right)at \implies \Delta y = (32.0)(30.0) + \left(\frac{1}{2}\right)(-1.60)(30.0) \implies \Delta y = 960 - 24.0 = 936\text{ m}

    Correct

    Δy=v0t+12at2=(32.0)(30.0)+12(−1.60)(30.0)2=960−720=+240 m\Delta y = v_0 t + \frac{1}{2}at^2 = (32.0)(30.0) + \frac{1}{2}(-1.60)(30.0)^2 = 960 - 720 = +240\text{ m}

    You forgot to square time tt in the acceleration term. The kinematic displacement equation requires t2t^2, because 12at2\frac{1}{2}at^2 has dimensions of meters, whereas 12at\frac{1}{2}at has units of velocity (m/s\text{m/s}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly established the upward coordinate system and treated downward acceleration as negative.

You applied the velocity-time equation accurately to find v=−16.0 m/sv = -16.0\text{ m/s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Kinematic Equation Recall

You wrote tt instead of t2t^2 in the acceleration term of the displacement equation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You recalled the acceleration term as linear in time rather than quadratic, missing the dimensional requirement that acceleration (m/s2\text{m/s}^2) must multiply time squared (t2t^2) to yield units of displacement (m\text{m}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Check for Kinematic Terms
  • Every additive term in a displacement equation must have units of length (meters).

  • Check that v0tv_0 t gives (m/s)(s)=m(\text{m/s})(\text{s}) = \text{m} and 12at2\frac{1}{2}at^2 gives (m/s2)(s2)=m(\text{m/s}^2)(\text{s}^2) = \text{m} before calculating.

Square the Time in Displacement
  • Displacement under constant acceleration is Δy=v0t+12at2\Delta y = v_0 t + \frac{1}{2}at^2.

  • Ensure the exponent 22 is written on tt both in your symbolic formula and when substituting numbers.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the complete constant-acceleration displacement formula: Δy=v0t+12at2\Delta y = v_0 t + \frac{1}{2}at^2.

  2. Substitute v0=+32.0 m/sv_0 = +32.0\text{ m/s}, a=−1.60 m/s2a = -1.60\text{ m/s}^2, and t=30.0 st = 30.0\text{ s}: Δy=(32.0)(30.0)+12(−1.60)(30.0)2\Delta y = (32.0)(30.0) + \frac{1}{2}(-1.60)(30.0)^2.

  3. Evaluate the squared time and compute each term: Δy=960−0.80(900)=960−720=+240 m\Delta y = 960 - 0.80(900) = 960 - 720 = +240\text{ m}.

Final answer

v=−16.0 m/sv = -16.0\text{ m/s}, Δy=+240 m\Delta y = +240\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that the time variable is squared in 12at2\frac{1}{2}at^2 whenever you compute displacement.

  • Perform a quick dimensional analysis on each term of your kinematic formulas to catch missing exponents early.

Lock it in

Similar question

01

A toy rocket is launched vertically upward from the ground with an initial speed of 25.0 m/s25.0\text{ m/s} in an environment where g=10.0 m/s2g = 10.0\text{ m/s}^2 downward. Taking upward as positive, find the rocket's velocity after 4.0 s4.0\text{ s}.

Answer

v=−15.0 m/sv = -15.0\text{ m/s}. Key step: With upward as positive, a=−10.0 m/s2a = -10.0\text{ m/s}^2. Using v=v0+at=25.0+(−10.0)(4.0)=−15.0 m/sv = v_0 + at = 25.0 + (-10.0)(4.0) = -15.0\text{ m/s}.

02

A stone is thrown vertically upward from the edge of a cliff with v0=+15.0 m/sv_0 = +15.0\text{ m/s}. The downward gravitational acceleration is g=9.80 m/s2g = 9.80\text{ m/s}^2. Taking upward as positive, find the stone's vertical displacement Δy\Delta y relative to the launch point at t=3.00 st = 3.00\text{ s}.

Answer

Δy=+0.90 m\Delta y = +0.90\text{ m}. Key step: Δy=v0t+12at2=(15.0)(3.00)+12(−9.80)(3.00)2=45.0−44.1=+0.90 m\Delta y = v_0 t + \frac{1}{2}at^2 = (15.0)(3.00) + \frac{1}{2}(-9.80)(3.00)^2 = 45.0 - 44.1 = +0.90\text{ m}.

03

A lunar lander descends vertically toward the moon's surface (gmoon=1.62 m/s2g_{\text{moon}} = 1.62\text{ m/s}^2). At t=0t = 0, its downward velocity is 12.0 m/s12.0\text{ m/s} and its thrusters provide a constant upward acceleration of 2.50 m/s22.50\text{ m/s}^2. Defining downward as the positive direction, determine the net acceleration aa and calculate the lander's velocity at t=8.0 st = 8.0\text{ s}.

Answer

a=−0.88 m/s2a = -0.88\text{ m/s}^2, v=+4.96 m/sv = +4.96\text{ m/s} (or 4.96 m/s4.96\text{ m/s} downward). Key steps: Downward is positive, so gravity is +1.62 m/s2+1.62\text{ m/s}^2 and upward thrust is −2.50 m/s2-2.50\text{ m/s}^2, giving anet=+1.62−2.50=−0.88 m/s2a_{\text{net}} = +1.62 - 2.50 = -0.88\text{ m/s}^2. Then v=v0+at=12.0+(−0.88)(8.0)=+4.96 m/sv = v_0 + at = 12.0 + (-0.88)(8.0) = +4.96\text{ m/s}.

Loading workspace…