Resources

A remote-controlled survey drone flies horizontally in a straight line at a constant velocity. A telemetry sensor records that the drone arrives at a checkpoint located at x2=640.0 mx_2 = 640.0\text{ m} at time t2=32.0 st_2 = 32.0\text{ s}. If the drone maintained the same constant velocity throughout the flight and its position at t1=12.0 st_1 = 12.0\text{ s} was x1=280.0 mx_1 = 280.0\text{ m}, reconstruct the initial state of the drone by calculating its constant velocity vv and its initial coordinate position x0x_0 at t=0 st = 0\text{ s}.

Answer and steps

Final answer

v=18.0 m/sv = 18.0\text{ m/s}; x0=64.0 mx_0 = 64.0\text{ m}.

Steps

01

Calculate the constant velocity vv

In uniform linear motion (motion along a straight line at constant velocity), the velocity equals the rate of change of position over any elapsed time interval:

v=ΔxΔt=x2−x1t2−t1v = \frac{\Delta x}{\Delta t} = \frac{x_2 - x_1}{t_2 - t_1}

Substitute the values given by the telemetry data:

v=640.0 m−280.0 m32.0 s−12.0 s=360.0 m20.0 s=18.0 m/sv = \frac{640.0\text{ m} - 280.0\text{ m}}{32.0\text{ s} - 12.0\text{ s}} = \frac{360.0\text{ m}}{20.0\text{ s}} = 18.0\text{ m/s}


02

Determine the initial position x0x_0 at t=0 st = 0\text{ s}

The kinematic equation for an object moving with a constant velocity vv is:

x(t)=x0+vtx(t) = x_0 + v t

Rearranging to solve for the initial position x0x_0:

x0=x(t)−vtx_0 = x(t) - v t

Using the position at t1=12.0 st_1 = 12.0\text{ s}:

x0=280.0 m−(18.0 m/s)(12.0 s)x_0 = 280.0\text{ m} - (18.0\text{ m/s})(12.0\text{ s}) x0=280.0 m−216.0 m=64.0 mx_0 = 280.0\text{ m} - 216.0\text{ m} = 64.0\text{ m}

(Verification using checkpoint 2): x0=640.0 m−(18.0 m/s)(32.0 s)=640.0 m−576.0 m=64.0 mx_0 = 640.0\text{ m} - (18.0\text{ m/s})(32.0\text{ s}) = 640.0\text{ m} - 576.0\text{ m} = 64.0\text{ m}

Both checkpoints confirm the same initial coordinate.


Common Pitfall to Avoid

Do not calculate velocity as simply x1t1\frac{x_1}{t_1} or x2t2\frac{x_2}{t_2}. That ratio only equals the velocity if the object started directly at the origin (x0=0x_0 = 0). When x0≠0x_0 \neq 0, the velocity must be determined from the difference between two points, ΔxΔt\frac{\Delta x}{\Delta t}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates velocity by dividing the final position by the final time instead of using the change in position over the change in time, leading to an incorrect velocity and an initial position of zero.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v=x2t2  ⟹  v=640.032.0  ⟹  v=20.0 m/sv = \frac{x_2}{t_2} \implies v = \frac{640.0}{32.0} \implies v = 20.0\text{ m/s}

    Correct

    v=ΔxΔt=x2−x1t2−t1=640.0 m−280.0 m32.0 s−12.0 s=18.0 m/sv = \frac{\Delta x}{\Delta t} = \frac{x_2 - x_1}{t_2 - t_1} = \frac{640.0\text{ m} - 280.0\text{ m}}{32.0\text{ s} - 12.0\text{ s}} = 18.0\text{ m/s}

    You calculated velocity by dividing a single coordinate by elapsed time, which only works if the object starts at x0=0x_0 = 0. Because two distinct points in time were given, the constant velocity must be found from the rate of change between them: v=x2−x1t2−t1v = \frac{x_2 - x_1}{t_2 - t_1}.

  2. Step 2

    x0=x2−v⋅t2  ⟹  x0=640.0−(20.0)(32.0)  ⟹  x0=0.0 mx_0 = x_2 - v \cdot t_2 \implies x_0 = 640.0 - (20.0)(32.0) \implies x_0 = 0.0\text{ m}

    Correct

    x0=x1−vt1=280.0 m−(18.0 m/s)(12.0 s)=64.0 mx_0 = x_1 - v t_1 = 280.0\text{ m} - (18.0\text{ m/s})(12.0\text{ s}) = 64.0\text{ m}

    Your formula rearrangement x0=x(t)−vtx_0 = x(t) - vt is completely correct, but substituting the incorrect velocity of 20.0 m/s20.0\text{ m/s} caused the result to collapse to 0.0 m0.0\text{ m}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled the kinematic relationship x(t)=x0+vtx(t) = x_0 + vt and isolated the initial coordinate x0=x−vtx_0 = x - vt.

You performed the arithmetic accurately according to your chosen formulas.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Coordinate vs. Displacement Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated position xx as total distance traveled from the origin rather than an arbitrary coordinate, assuming x0=0x_0 = 0 when computing velocity.

REASONING PATH
Your ACEpath teacher’s suggested approach
Definition of Constant Velocity
  • In one-dimensional motion, constant velocity is defined as the change in coordinate divided by the change in time: v=ΔxΔt=x2−x1t2−t1v = \frac{\Delta x}{\Delta t} = \frac{x_2 - x_1}{t_2 - t_1}.

  • Whenever you are given coordinates at two non-zero times, always take coordinate differences Δx\Delta x and Δt\Delta t rather than single ratios.

Cross-Check with Both Data Points
  • A constant-velocity trajectory must satisfy x(t)=x0+vtx(t) = x_0 + vt for every recorded checkpoint.

  • Test your calculated vv and x0x_0 with the unused checkpoint: checking x1=0.0+(20.0)(12.0)=240.0 m≠280.0 mx_1 = 0.0 + (20.0)(12.0) = 240.0\text{ m} \neq 280.0\text{ m} would have immediately flagged the error.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the velocity using both telemetry checkpoints: v=x2−x1t2−t1=640.0−280.032.0−12.0=360.020.0=18.0 m/sv = \frac{x_2 - x_1}{t_2 - t_1} = \frac{640.0 - 280.0}{32.0 - 12.0} = \frac{360.0}{20.0} = 18.0\text{ m/s}.

  2. Substitute v=18.0 m/sv = 18.0\text{ m/s} into the rearranged position equation using either checkpoint: x0=x1−vt1=280.0−(18.0)(12.0)=280.0−216.0=64.0 mx_0 = x_1 - v t_1 = 280.0 - (18.0)(12.0) = 280.0 - 216.0 = 64.0\text{ m}.

Final answer

v=18.0 m/sv = 18.0\text{ m/s}; x0=64.0 mx_0 = 64.0\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice computing slope/velocity from coordinate pairs (t1,x1)(t_1, x_1) and (t2,x2)(t_2, x_2) using ΔxΔt\frac{\Delta x}{\Delta t}.

  • Always plug your reconstructed initial condition back into the other data point to verify internal consistency.

OverviewACEpath Teacher's Diagnosis

02 The student adds the displacement to the initial time position instead of subtracting it when extrapolating backward to time t = 0.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v=(640.0−280.0)/(32.0−12.0)  ⟹  v=360.0/20.0  ⟹  v=18.0 m/sv = (640.0 - 280.0)/(32.0 - 12.0) \implies v = 360.0 / 20.0 \implies v = 18.0\text{ m/s}

  2. Step 2

    x0=x1+v∗t1  ⟹  x0=280.0+(18.0)(12.0)  ⟹  x0=280.0+216.0  ⟹  x0=496.0 mx_0 = x_1 + v * t_1 \implies x_0 = 280.0 + (18.0)(12.0) \implies x_0 = 280.0 + 216.0 \implies x_0 = 496.0\text{ m}

    Correct

    x0=x1−vt1=280.0 m−(18.0 m/s)(12.0 s)=64.0 mx_0 = x_1 - v t_1 = 280.0\text{ m} - (18.0\text{ m/s})(12.0\text{ s}) = 64.0\text{ m}

    When rearranging the position function x1=x0+vt1x_1 = x_0 + v t_1 to isolate x0x_0, you need to subtract vt1v t_1 from both sides (x0=x1−vt1x_0 = x_1 - v t_1). Adding it projects the drone forward in time rather than backward to t=0 st = 0\text{ s}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the two telemetry points to compute the constant velocity.

You accurately calculated the displacement vt1=216.0 mv t_1 = 216.0\text{ m} for the 12.0 s12.0\text{ s} time interval.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign / algebraic inversion error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the relationship between initial position and later position by writing x0=x1+vt1x_0 = x_1 + vt_1 instead of isolating x0x_0 from the standard kinematic equation x1=x0+vt1x_1 = x_0 + vt_1.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolate Before Substituting
  • In uniform motion, x(t)=x0+vt  ⟹  x0=x(t)−vtx(t) = x_0 + vt \implies x_0 = x(t) - vt.

  • Write down the base definition x(t)=x0+vtx(t) = x_0 + vt first, isolate x0x_0 symbolically, and only then substitute your numbers.

Physical Sanity Check
  • If velocity is positive (v>0v > 0), position increases as time moves forward.

  • Since the drone moves in the +x+x direction, its position at t=0 st = 0\text{ s} must be less than its position at t=12.0 st = 12.0\text{ s} (x0<280.0 mx_0 < 280.0\text{ m}). An answer of 496.0 m496.0\text{ m} indicates an extrapolation forward rather than backward.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start with the linear position formula: x1=x0+vt1x_1 = x_0 + v t_1

  2. Subtract vt1v t_1 from both sides to isolate x0x_0: x0=x1−vt1x_0 = x_1 - v t_1

  3. Substitute the values: x0=280.0 m−(18.0 m/s)(12.0 s)=280.0 m−216.0 m=64.0 mx_0 = 280.0\text{ m} - (18.0\text{ m/s})(12.0\text{ s}) = 280.0\text{ m} - 216.0\text{ m} = 64.0\text{ m}

Final answer

v=18.0 m/sv = 18.0\text{ m/s}; x0=64.0 mx_0 = 64.0\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review isolating variables in linear kinematics equations before plugging in values.

  • Perform a physical direction check: moving forward with positive velocity means earlier positions must have smaller coordinate values.

OverviewACEpath Teacher's Diagnosis

03 The student mistakenly inverts the velocity formula as time elapsed divided by distance traveled.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v=ΔtΔx  ⟹  v=32.0−12.0640.0−280.0  ⟹  v=20.0360.0  ⟹  v=0.056 m/sv = \frac{\Delta t}{\Delta x} \implies v = \frac{32.0 - 12.0}{640.0 - 280.0} \implies v = \frac{20.0}{360.0} \implies v = 0.056\text{ m/s}

    Correct

    v=ΔxΔt=640.0 m−280.0 m32.0 s−12.0 s=360.0 m20.0 s=18.0 m/sv = \frac{\Delta x}{\Delta t} = \frac{640.0\text{ m} - 280.0\text{ m}}{32.0\text{ s} - 12.0\text{ s}} = \frac{360.0\text{ m}}{20.0\text{ s}} = 18.0\text{ m/s}

    Velocity is the rate of change of position with respect to time (v=ΔxΔtv = \frac{\Delta x}{\Delta t}), but you placed time in the numerator and displacement in the denominator.

  2. Step 2

    x0=x1−v⋅t1  ⟹  x0=280.0−(0.056)(12.0)  ⟹  x0=280.0−0.67  ⟹  x0=279.33 mx_0 = x_1 - v \cdot t_1 \implies x_0 = 280.0 - (0.056)(12.0) \implies x_0 = 280.0 - 0.67 \implies x_0 = 279.33\text{ m}

    Correct

    x0=x1−vt1=280.0 m−(18.0 m/s)(12.0 s)=64.0 mx_0 = x_1 - v t_1 = 280.0\text{ m} - (18.0\text{ m/s})(12.0\text{ s}) = 64.0\text{ m}

    Your algebraic setup x0=x1−vt1x_0 = x_1 - v t_1 and arithmetic are sound, but the final coordinate was thrown off because you substituted the inverted velocity value.

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that the drone travels at a constant velocity between the two telemetry checkpoints.

You correctly used coordinate differences between the two recorded points rather than assuming the motion started at the origin.

You correctly rearranged the linear motion formula x(t)=x0+vtx(t) = x_0 + v t to solve for x0x_0.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted rate definition

You swapped the numerator and denominator when writing the average velocity formula.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the ratio of the two changing quantities without checking their physical units; velocity has units of meters per second (m/s\text{m/s}), which requires distance in the numerator and time in the denominator.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Dimensional Check
  • Velocity is measured in m/s\text{m/s}, so displacement (m\text{m}) must be on top and time (s\text{s}) on the bottom: v=ΔxΔtv = \frac{\Delta x}{\Delta t}.

  • Whenever you write a rate formula, check that the units on the right-hand side match the unit of the variable you are solving for.

Sanity Check with Values
  • A survey drone traveling hundreds of meters across twenty seconds must have a speed well over 1 m/s1\text{ m/s}.

  • Estimate the magnitude of your result before moving to the next step: 360 m20 s≈18 m/s\frac{360\text{ m}}{20\text{ s}} \approx 18\text{ m/s}, not 0.056 m/s0.056\text{ m/s}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the correct constant velocity: v=ΔxΔt=640.0−280.032.0−12.0=360.0 m20.0 s=18.0 m/sv = \frac{\Delta x}{\Delta t} = \frac{640.0 - 280.0}{32.0 - 12.0} = \frac{360.0\text{ m}}{20.0\text{ s}} = 18.0\text{ m/s}.

  2. Substitute v=18.0 m/sv = 18.0\text{ m/s} into your correct position expression: x0=x1−vt1=280.0−(18.0)(12.0)x_0 = x_1 - v t_1 = 280.0 - (18.0)(12.0).

  3. Evaluate the product and difference: x0=280.0−216.0=64.0 mx_0 = 280.0 - 216.0 = 64.0\text{ m}.

Final answer

v=18.0 m/sv = 18.0\text{ m/s}; x0=64.0 mx_0 = 64.0\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the fundamental definition of velocity as v=ΔxΔtv = \frac{\Delta x}{\Delta t} and practice dimensional analysis on every ratio.

  • Verify your computed velocity by plugging it into the second telemetry checkpoint (x2=x0+vt2x_2 = x_0 + v t_2) to confirm both points agree.

Lock it in

Similar question

01

A motorized cart moves along a straight measurement track at a constant velocity. A sensor records its position as x1=45.0 mx_1 = 45.0\text{ m} at t1=3.0 st_1 = 3.0\text{ s} and x2=105.0 mx_2 = 105.0\text{ m} at t2=7.0 st_2 = 7.0\text{ s}. Find the cart's constant velocity vv and its starting position x0x_0 at t=0 st = 0\text{ s}.

Answer

v=15.0 m/sv = 15.0\text{ m/s}, x0=0.0 mx_0 = 0.0\text{ m}. Steps: v=x2−x1t2−t1=105.0−45.07.0−3.0=60.04.0=15.0 m/sv = \frac{x_2 - x_1}{t_2 - t_1} = \frac{105.0 - 45.0}{7.0 - 3.0} = \frac{60.0}{4.0} = 15.0\text{ m/s}; x0=x1−vt1=45.0−(15.0)(3.0)=0.0 mx_0 = x_1 - vt_1 = 45.0 - (15.0)(3.0) = 0.0\text{ m}.

02

A runner maintains a constant pace along a marked straight road. At t=10.0 st = 10.0\text{ s}, the runner passes the 110.0 m110.0\text{ m} mark, and at t=25.0 st = 25.0\text{ s}, passes the 200.0 m200.0\text{ m} mark. Determine the runner's speed vv and position x0x_0 at t=0 st = 0\text{ s}.

Answer

v=6.0 m/sv = 6.0\text{ m/s}, x0=50.0 mx_0 = 50.0\text{ m}. Steps: v=ΔxΔt=200.0−110.025.0−10.0=90.015.0=6.0 m/sv = \frac{\Delta x}{\Delta t} = \frac{200.0 - 110.0}{25.0 - 10.0} = \frac{90.0}{15.0} = 6.0\text{ m/s}; x0=110.0−(6.0)(10.0)=50.0 mx_0 = 110.0 - (6.0)(10.0) = 50.0\text{ m}.

03

An autonomous rover travels with constant linear velocity across a test grid. An engineer notes that between t=4.0 st = 4.0\text{ s} and t=14.0 st = 14.0\text{ s}, the rover covers a displacement of Δx=+80.0 m\Delta x = +80.0\text{ m}. If the coordinate at t=14.0 st = 14.0\text{ s} is x=150.0 mx = 150.0\text{ m}, find its position at t=0 st = 0\text{ s} and predict its arrival time at coordinate x=270.0 mx = 270.0\text{ m}.

Answer

x0=38.0 mx_0 = 38.0\text{ m}, ttarget=29.0 st_{\text{target}} = 29.0\text{ s}. Steps: v=ΔxΔt=80.010.0=8.0 m/sv = \frac{\Delta x}{\Delta t} = \frac{80.0}{10.0} = 8.0\text{ m/s}; x0=150.0−(8.0)(14.0)=150.0−112.0=38.0 mx_0 = 150.0 - (8.0)(14.0) = 150.0 - 112.0 = 38.0\text{ m}; solving 270.0=38.0+8.0t270.0 = 38.0 + 8.0t gives t=232.08.0=29.0 st = \frac{232.0}{8.0} = 29.0\text{ s}.

Loading workspace…