Resources

In deep interstellar space, a cosmic dust grain is in thermal equilibrium with the cosmic microwave background radiation at an asymptotic limit of 2.725 K2.725\text{ K}. (a) Convert this cryogenic limit temperature to degrees Celsius (∘C^\circ\text{C}) to three decimal places. (b) Convert this temperature to degrees Fahrenheit (∘F^\circ\text{F}) to two decimal places.

Answer and steps

Final answer

(a) −270.425∘C-270.425^\circ\text{C}; (b) −454.77∘F-454.77^\circ\text{F}

Steps

Part (a): Converting Kelvin to Celsius

The relationship between the Kelvin scale (TKT_{\text{K}}) and the Celsius scale (TCT_{\text{C}}) is defined by the shift in zero points:

TC=TK−273.15T_{\text{C}} = T_{\text{K}} - 273.15

Substitute the given temperature TK=2.725 KT_{\text{K}} = 2.725\text{ K}:

TC=2.725−273.15=−270.425∘CT_{\text{C}} = 2.725 - 273.15 = -270.425^\circ\text{C}

Common Pitfall: Using the approximation 273273 instead of the exact offset 273.15273.15 introduces an error of 0.15∘C0.15^\circ\text{C}, which ruins high-precision decimal requirements.


Part (b): Converting to Fahrenheit

The Fahrenheit scale (TFT_{\text{F}}) is related to the Celsius scale by scaling the degree size by a factor of 95\frac{9}{5} (or 1.81.8) and shifting the freezing point of water by +32∘F+32^\circ\text{F}:

TF=95TC+32T_{\text{F}} = \frac{9}{5}T_{\text{C}} + 32

Substitute the exact unrounded value of TC=−270.425∘CT_{\text{C}} = -270.425^\circ\text{C}:

TF=1.8⋅(−270.425)+32T_{\text{F}} = 1.8 \cdot (-270.425) + 32

TF=−486.765+32=−454.765∘FT_{\text{F}} = -486.765 + 32 = -454.765^\circ\text{F}

Rounding to two decimal places gives:

TF≈−454.77∘FT_{\text{F}} \approx -454.77^\circ\text{F}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student adds 273.15 instead of subtracting it when converting from Kelvin to Celsius.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    T(∘C)=2.725+273.15  ⟹  T(∘C)=275.875 ∘CT(^\circ\text{C}) = 2.725 + 273.15 \implies T(^\circ\text{C}) = 275.875\,^\circ\text{C}

    Correct

    T(∘C)=2.725−273.15=−270.425 ∘CT(^\circ\text{C}) = 2.725 - 273.15 = -270.425\,^\circ\text{C}

    You added 273.15273.15 instead of subtracting it. Because 0 K0\text{ K} represents absolute zero (−273.15 ∘C-273.15\,^\circ\text{C}), the conversion formula is T(∘C)=TK−273.15T(^\circ\text{C}) = T_{\text{K}} - 273.15, giving −270.425 ∘C-270.425\,^\circ\text{C}.

  2. Step 2

    T(∘F)=(95)×275.875+32  ⟹  T(∘F)=496.575+32T(^\circ\text{F}) = \left(\frac{9}{5}\right) \times 275.875 + 32 \implies T(^\circ\text{F}) = 496.575 + 32

    Correct

    T(∘F)=(95)(−270.425)+32=−486.765+32T(^\circ\text{F}) = \left(\frac{9}{5}\right)(-270.425) + 32 = -486.765 + 32

    You correctly applied the conversion formula T(∘F)=95T(∘C)+32T(^\circ\text{F}) = \frac{9}{5}T(^\circ\text{C}) + 32, but this step was affected by substituting your positive Celsius value from Step 1.

  3. Step 3

    T(∘F)=528.58 ∘FT(^\circ\text{F}) = 528.58\,^\circ\text{F}

    Correct

    T(∘F)=−454.765 ∘F≈−454.77 ∘FT(^\circ\text{F}) = -454.765\,^\circ\text{F} \approx -454.77\,^\circ\text{F}

    You rounded correctly to two decimal places based on your previous arithmetic, but the final numerical value is incorrect due to the initial offset error in Part (a).

WHAT YOU DID WELL
Compliments from Your Teacher

You used the exact precision offset 273.15273.15 rather than an oversimplified integer like 273273.

You selected the correct formula T(∘F)=95T(∘C)+32T(^\circ\text{F}) = \frac{9}{5}T(^\circ\text{C}) + 32 for the Fahrenheit conversion.

You accurately rounded your final Fahrenheit result to two decimal places.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Offset Sign in Kelvin-Celsius Conversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the direction of the zero-point shift between Kelvin and Celsius. Remember that TK=TC+273.15T_{\text{K}} = T_{\text{C}} + 273.15. Solving for Celsius requires subtracting 273.15273.15, so TC=TK−273.15T_{\text{C}} = T_{\text{K}} - 273.15. A temperature near absolute zero (2.725 K2.725\text{ K}) must be deeply negative in Celsius, never above room temperature.

REASONING PATH
Your ACEpath teacher’s suggested approach
Physical Reality Check
  • Deep space at 2.725 K2.725\text{ K} is extremely close to absolute zero (−273.15 ∘C-273.15\,^\circ\text{C}), so the Celsius temperature must be a negative value near −270 ∘C-270\,^\circ\text{C}.

  • Always verify that cryogenic temperatures near 0 K0\text{ K} result in large negative values on the Celsius and Fahrenheit scales.

Scale Offset Isolation
  • TK=T(∘C)+273.15  ⟺  T(∘C)=TK−273.15T_{\text{K}} = T(^\circ\text{C}) + 273.15 \iff T(^\circ\text{C}) = T_{\text{K}} - 273.15.

  • When starting with Kelvin, subtract 273.15273.15 to reach Celsius.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Subtract 273.15273.15 from 2.725 K2.725\text{ K}: T(∘C)=2.725−273.15=−270.425 ∘CT(^\circ\text{C}) = 2.725 - 273.15 = -270.425\,^\circ\text{C}.

  2. Substitute −270.425 ∘C-270.425\,^\circ\text{C} into the Fahrenheit relation: T(∘F)=95(−270.425)+32=−486.765+32=−454.765 ∘FT(^\circ\text{F}) = \frac{9}{5}(-270.425) + 32 = -486.765 + 32 = -454.765\,^\circ\text{F}.

  3. Round to two decimal places: T(∘F)≈−454.77 ∘FT(^\circ\text{F}) \approx -454.77\,^\circ\text{F}.

Final answer

(a) −270.425∘C-270.425^\circ\text{C}; (b) −454.77∘F-454.77^\circ\text{F}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the base relation TK=T(∘C)+273.15T_{\text{K}} = T(^\circ\text{C}) + 273.15 and practice rearranging it before inserting numbers.

  • Perform an order-of-magnitude physical sanity check: temperatures below 273.15 K273.15\text{ K} must always yield negative Celsius values.

  • Complete the targeted flashcards and practice problems below to solidify two-step conversions.

OverviewACEpath Teacher's Diagnosis

02 The student uses the inverted scale factor 5/9 instead of 9/5 when converting from Celsius to Fahrenheit.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T(∘C)=2.725−273.15  ⟹  T(∘C)=−270.425 ∘CT(^\circ\text{C}) = 2.725 - 273.15 \implies T(^\circ\text{C}) = -270.425\ ^\circ\text{C}

  2. Step 2

    T(∘F)=59×(−270.425)+32T(^\circ\text{F}) = \frac{5}{9} \times (-270.425) + 32

    Correct

    T(∘F)=95×(−270.425)+32T(^\circ\text{F}) = \frac{9}{5} \times (-270.425) + 32

    You used the fraction 59\frac{5}{9} instead of 95\frac{9}{5}. Because a Celsius degree is larger than a Fahrenheit degree (1∘C=1.8∘F1^\circ\text{C} = 1.8^\circ\text{F}), you must multiply by 95\frac{9}{5} (or 1.81.8) when converting from Celsius to Fahrenheit.

  3. Step 3

    T(∘F)=−118.24 ∘FT(^\circ\text{F}) = -118.24\ ^\circ\text{F}

    Correct

    T(∘F)=1.8×(−270.425)+32=−454.77 ∘FT(^\circ\text{F}) = 1.8 \times (-270.425) + 32 = -454.77\ ^\circ\text{F}

    Your arithmetic follows correctly from the inverted ratio used in the previous step, but the final numerical value is affected by that initial setup error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the exact conversion offset 273.15273.15 between Kelvin and Celsius.

You accurately calculated and reported the cryogenic Celsius temperature to three decimal places.

You correctly added the 32∘F32^\circ\text{F} freezing point offset in your Fahrenheit formula setup.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted scale factor

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You swapped the numerator and denominator in the temperature scaling ratio, using 59\frac{5}{9} instead of 95\frac{9}{5} when converting from Celsius to Fahrenheit.

REASONING PATH
Your ACEpath teacher’s suggested approach
Scaling Factor Direction
  • Converting Celsius to Fahrenheit expands the interval by a factor of 95\frac{9}{5} (or 1.81.8), so TF=95TC+32T_{\text{F}} = \frac{9}{5}T_{\text{C}} + 32. Converting Fahrenheit to Celsius contracts the interval by 59\frac{5}{9}, so TC=59(TF−32)T_{\text{C}} = \frac{5}{9}(T_{\text{F}} - 32).

  • Check whether your target degree is smaller or larger: 1∘C1^\circ\text{C} spans 1.8∘F1.8^\circ\text{F}, so Celsius values must always be multiplied by the larger ratio 95\frac{9}{5} before adding 3232.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the standard conversion formula: TF=95TC+32T_{\text{F}} = \frac{9}{5}T_{\text{C}} + 32

  2. Substitute TC=−270.425∘CT_{\text{C}} = -270.425^\circ\text{C}: TF=1.8×(−270.425)+32T_{\text{F}} = 1.8 \times (-270.425) + 32

  3. Multiply the values: 1.8×(−270.425)=−486.7651.8 \times (-270.425) = -486.765

  4. Add the offset: −486.765+32=−454.765-486.765 + 32 = -454.765

  5. Round to two decimal places: −454.77∘F-454.77^\circ\text{F}

Final answer

(a) −270.425∘C-270.425^\circ\text{C}; (b) −454.77∘F-454.77^\circ\text{F}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the forward conversion TF=1.8TC+32T_{\text{F}} = 1.8 T_{\text{C}} + 32 using decimals (1.81.8) to avoid flipping the fraction 95\frac{9}{5}.

  • Perform a quick sense check using water's boiling point: 100∘C×1.8+32=212∘F100^\circ\text{C} \times 1.8 + 32 = 212^\circ\text{F}.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to add the 32-degree offset when converting temperature to Fahrenheit.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T(∘C)=2.725−273.15  ⟹  T(∘C)=−270.425 ∘CT(^\circ\text{C}) = 2.725 - 273.15 \implies T(^\circ\text{C}) = -270.425\ ^\circ\text{C}

  2. Step 2

    T(∘F)=(95)×(−270.425)  ⟹  T(∘F)=−486.765T(^\circ\text{F}) = \left(\frac{9}{5}\right) \times (-270.425) \implies T(^\circ\text{F}) = -486.765

    Correct

    TF=95TC+32=1.8⋅(−270.425)+32=−486.765+32=−454.765∘FT_{\text{F}} = \frac{9}{5}T_{\text{C}} + 32 = 1.8 \cdot (-270.425) + 32 = -486.765 + 32 = -454.765^\circ\text{F}

    You multiplied by the scale factor 95\frac{9}{5}, but you forgot to add the +32∘F+32^\circ\text{F} baseline shift that aligns the freezing point of water on the Fahrenheit scale.

  3. Step 3

    T(∘F)=−486.77 ∘FT(^\circ\text{F}) = -486.77\ ^\circ\text{F}

    Correct

    TF≈−454.77∘FT_{\text{F}} \approx -454.77^\circ\text{F}

    Your rounding to two decimal places was executed correctly, but the numeric value was inherited from the omitted offset in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You used the high-precision offset 273.15273.15 rather than the rounded approximation 273273.

You correctly identified and applied the 95\frac{9}{5} scaling factor between Celsius and Fahrenheit intervals.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted additive offset in temperature conversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the Fahrenheit conversion as a direct proportional scaling rather than an affine transformation. Absolute temperature conversion requires both a scale factor and a baseline shift: TF=95TC+32T_{\text{F}} = \frac{9}{5}T_{\text{C}} + 32.

REASONING PATH
Your ACEpath teacher’s suggested approach
Temperature Reading vs. Temperature Interval
  • For a specific temperature: TF=95TC+32T_{\text{F}} = \frac{9}{5}T_{\text{C}} + 32. For a temperature difference: ΔTF=95ΔTC\Delta T_{\text{F}} = \frac{9}{5}\Delta T_{\text{C}}.

  • Check whether you are converting a single thermometer reading (add 3232) or a temperature change/difference (do not add 3232).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take your scaled value and add the required +32∘F+32^\circ\text{F} zero-point shift: TF=−486.765+32T_{\text{F}} = -486.765 + 32.

  2. Add the terms: TF=−454.765∘FT_{\text{F}} = -454.765^\circ\text{F}.

  3. Round the result to two decimal places: −454.765∘F≈−454.77∘F-454.765^\circ\text{F} \approx -454.77^\circ\text{F}.

Final answer

(a) −270.425∘C-270.425^\circ\text{C}; (b) −454.77∘F-454.77^\circ\text{F}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the full conversion formula TF=95TC+32T_{\text{F}} = \frac{9}{5}T_{\text{C}} + 32 and verify it using the benchmark 0∘C=32∘F0^\circ\text{C} = 32^\circ\text{F}.

  • Practice converting negative Celsius temperatures to ensure you correctly combine the negative product with the positive +32+32.

Lock it in

Similar question

01

Liquid helium boils at 4.222 K4.222\text{ K} at standard atmospheric pressure. Convert this boiling point to: (a) degrees Celsius (∘C^\circ\text{C}) to three decimal places; (b) degrees Fahrenheit (∘F^\circ\text{F}) to two decimal places.

Answer

(a) −268.928∘C-268.928^\circ\text{C}; (b) −452.07∘F-452.07^\circ\text{F}. Steps: TC=4.222−273.15=−268.928∘CT_{\text{C}} = 4.222 - 273.15 = -268.928^\circ\text{C}; TF=1.8(−268.928)+32=−484.0704+32=−452.0704≈−452.07∘FT_{\text{F}} = 1.8(-268.928) + 32 = -484.0704 + 32 = -452.0704 \approx -452.07^\circ\text{F}.

02

Liquid nitrogen boils at −195.79 ∘C-195.79\,^\circ\text{C}. Convert this temperature to: (a) Kelvin (K\text{K}) to two decimal places; (b) degrees Fahrenheit (∘F^\circ\text{F}) to two decimal places.

Answer

(a) 77.36 K77.36\text{ K}; (b) −320.42∘F-320.42^\circ\text{F}. Steps: TK=−195.79+273.15=77.36 KT_{\text{K}} = -195.79 + 273.15 = 77.36\text{ K}; TF=1.8(−195.79)+32=−352.422+32=−320.422≈−320.42∘FT_{\text{F}} = 1.8(-195.79) + 32 = -352.422 + 32 = -320.422 \approx -320.42^\circ\text{F}.

03

A superconducting quantum bit must operate at a cryogenic temperature of 15.0 mK15.0\text{ mK} (0.0150 K0.0150\text{ K}). Find its temperature in degrees Fahrenheit (∘F^\circ\text{F}) to two decimal places.

Answer

−459.64∘F-459.64^\circ\text{F}. Steps: TC=0.0150−273.15=−273.135∘CT_{\text{C}} = 0.0150 - 273.15 = -273.135^\circ\text{C}; TF=1.8(−273.135)+32=−491.643+32=−459.643≈−459.64∘FT_{\text{F}} = 1.8(-273.135) + 32 = -491.643 + 32 = -459.643 \approx -459.64^\circ\text{F}.

Loading workspace…