Resources

A horizontal multi-stage flywheel energy storage system uses a composite rotor spinning in a vacuum enclosure with magnetic levitation bearings to eliminate air drag. Small residual electrodynamic eddy-current braking and hysteresis losses dissipate energy at a torque proportional to the instantaneous angular velocity: τdrag=−bω\tau_{\text{drag}} = -b \omega, where b=1.25×10−4 N⋅m⋅sb = 1.25 \times 10^{-4}\text{ N}\cdot\text{m}\cdot\text{s}. The flywheel possesses a moment of inertia of I=4.80 kg⋅m2I = 4.80\text{ kg}\cdot\text{m}^2 and is initially energized to an operating angular speed of ω0=8.50×103 rad/s\omega_0 = 8.50 \times 10^3\text{ rad/s}. Analyze the asymptotic energy dissipation chain (rotational kinetic energy converting to thermal eddy loss in stator coils) as time t→∞t \rightarrow \infty. Derive the explicit time-dependent kinetic energy function K(t)K(t) and compute both the initial stored kinetic energy K0K_0 and the total cumulative thermal energy EdissE_{\text{diss}} dissipated into the stator as t→∞t \rightarrow \infty.

Answer and steps

Final answer

K(t)=K0e−2bItK(t) = K_0 e^{-\frac{2b}{I}t}; initial stored energy K0=1.73×108 JK_0 = 1.73 \times 10^8\text{ J} (or 173 MJ173\text{ MJ}); cumulative thermal energy dissipated as t→∞t \rightarrow \infty is Ediss=1.73×108 JE_{\text{diss}} = 1.73 \times 10^8\text{ J} (or 173 MJ173\text{ MJ}).

Steps

01

Rotational Dynamics of the Decelerating Flywheel

The only torque acting on the magnetically levitated rotor is the linear drag torque caused by electrodynamic losses:

τnet=Idωdt=−bω\tau_{\text{net}} = I \frac{d\omega}{dt} = -b \omega

where:

  • I=4.80 kg⋅m2I = 4.80\text{ kg}\cdot\text{m}^2 is the moment of inertia,
  • b=1.25×10−4 N⋅m⋅sb = 1.25 \times 10^{-4}\text{ N}\cdot\text{m}\cdot\text{s} is the drag damping coefficient,
  • ω(t)\omega(t) is the instantaneous angular velocity.

Separating variables and integrating from t=0t = 0 (where ω(0)=ω0\omega(0) = \omega_0) to time tt:

∫ω0ω(t)dωω=−bI∫0tdt\int_{\omega_0}^{\omega(t)} \frac{d\omega}{\omega} = -\frac{b}{I} \int_0^t dt

ln⁡(ω(t)ω0)=−bIt  ⟹  ω(t)=ω0e−bIt\ln\left(\frac{\omega(t)}{\omega_0}\right) = -\frac{b}{I} t \implies \omega(t) = \omega_0 e^{-\frac{b}{I}t}


02

Time-Dependent Kinetic Energy K(t)K(t)

The rotational kinetic energy stored in the flywheel at any instant is given by:

K(t)=12I[ω(t)]2K(t) = \frac{1}{2} I [\omega(t)]^2

Substituting the expression for ω(t)\omega(t):

K(t)=12I(ω0e−bIt)2=(12Iω02)e−2bIt=K0e−2bItK(t) = \frac{1}{2} I \left(\omega_0 e^{-\frac{b}{I}t}\right)^2 = \left(\frac{1}{2} I \omega_0^2\right) e^{-\frac{2b}{I}t} = K_0 e^{-\frac{2b}{I}t}

where K0=K(0)=12Iω02K_0 = K(0) = \frac{1}{2} I \omega_0^2 is the initial stored kinetic energy.

Key Takeaway: Because kinetic energy depends on the square of the angular velocity, its decay rate is twice as fast as the decay rate of angular velocity (a characteristic decay time of I2b\frac{I}{2b} instead of Ib\frac{I}{b}).


03

Calculating Initial Stored Energy K0K_0

Substitute the given values into the formula for K0K_0:

K0=12(4.80 kg⋅m2)(8.50×103 rad/s)2K_0 = \frac{1}{2} (4.80\text{ kg}\cdot\text{m}^2) \left(8.50 \times 10^3\text{ rad/s}\right)^2

K0=2.40×(7.225×107 J)=1.734×108 J≈1.73×108 J(or 173 MJ)K_0 = 2.40 \times \left(7.225 \times 10^7\text{ J}\right) = 1.734 \times 10^8\text{ J} \approx 1.73 \times 10^8\text{ J} \quad (\text{or } 173\text{ MJ})


04

Total Cumulative Thermal Energy Dissipated EdissE_{\text{diss}}

The rate of energy dissipation into the stator through eddy currents and hysteresis is the mechanical power absorbed by the drag torque:

Pdiss(t)=∣τdrag∣ω=(bω)ω=bω2=−dKdtP_{\text{diss}}(t) = |\tau_{\text{drag}}| \omega = (b\omega)\omega = b\omega^2 = -\frac{dK}{dt}

Integrating Pdiss(t)P_{\text{diss}}(t) over the entire lifetime from t=0t = 0 to t→∞t \rightarrow \infty:

Ediss=∫0∞Pdiss(t) dt=−∫0∞dKdt dt=−[K(∞)−K(0)]E_{\text{diss}} = \int_0^\infty P_{\text{diss}}(t)\, dt = -\int_0^\infty \frac{dK}{dt}\, dt = -\big[K(\infty) - K(0)\big]

As t→∞t \rightarrow \infty, e−2bIt→0e^{-\frac{2b}{I}t} \rightarrow 0, which yields K(∞)=0K(\infty) = 0. Therefore, by the conservation of energy:

Ediss=K0−0=K0=1.73×108 J(or 173 MJ)E_{\text{diss}} = K_0 - 0 = K_0 = 1.73 \times 10^8\text{ J} \quad (\text{or } 173\text{ MJ})

The entire initial rotational kinetic energy is asymptotically converted into thermal dissipation in the stator coils.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to square the exponential decay factor when squaring angular velocity to find kinetic energy, resulting in a decay rate of b/I rather than 2b/I.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    I(dωdt)=−bω  ⟹  dωω=−(bI)dt  ⟹  ω(t)=ω0⋅e−(b/I)tI\left(\frac{d\omega}{dt}\right) = -b\omega \implies \frac{d\omega}{\omega} = -\left(\frac{b}{I}\right)dt \implies \omega(t) = \omega_0 \cdot e^{-(b/I)t}

  2. Step 2

    K(t)=(12)Iω02⋅e−(b/I)tK(t) = \left(\frac{1}{2}\right) I \omega_0^2 \cdot e^{-(b/I)t}

    Correct

    K(t)=12I[ω(t)]2=12I(ω0e−bIt)2=12Iω02e−2bIt=K0e−2bItK(t) = \frac{1}{2}I[\omega(t)]^2 = \frac{1}{2}I\left(\omega_0 e^{-\frac{b}{I}t}\right)^2 = \frac{1}{2}I\omega_0^2 e^{-\frac{2b}{I}t} = K_0 e^{-\frac{2b}{I}t}

    When substituting ω(t)\omega(t) into K=12Iω2K = \frac{1}{2}I\omega^2, you forgot to apply the exponent of 22 to the exponential factor: (e−bIt)2=e−2bIt\left(e^{-\frac{b}{I}t}\right)^2 = e^{-\frac{2b}{I}t}.

  3. Step 3

    bI=1.25×10−44.80=2.604×10−5 s−1  ⟹  K(t)=1.734×108⋅e−(2.60×10−5)t J\frac{b}{I} = \frac{1.25 \times 10^{-4}}{4.80} = 2.604 \times 10^{-5}\text{ s}^{-1} \implies K(t) = 1.734 \times 10^8 \cdot e^{-(2.60 \times 10^{-5})t}\text{ J}

    Correct

    2bI=2(1.25×10−4)4.80=5.21×10−5 s−1  ⟹  K(t)=1.73×108e−(5.21×10−5t) J\frac{2b}{I} = \frac{2(1.25 \times 10^{-4})}{4.80} = 5.21 \times 10^{-5}\text{ s}^{-1} \implies K(t) = 1.73 \times 10^8 e^{-(5.21 \times 10^{-5}t)}\text{ J}

    Your arithmetic evaluating bI\frac{b}{I} was accurate, but because the formula was missing the factor of 22 in the exponent, the numerical exponent was half of the true decay rate.

  4. Step 4

    K0=(12)Iω02=0.5×4.80×(8.50×103)2=1.734×108 JK_0 = \left(\frac{1}{2}\right) I \omega_0^2 = 0.5 \times 4.80 \times (8.50 \times 10^3)^2 = 1.734 \times 10^8\text{ J}

  5. Step 5

    As \text{As } t →\rightarrow ∞\infty,\ ω\omega →\rightarrow 0  and \text{ and } K →\rightarrow 0   ⟹  \implies E_{diss\text{diss}} = K_0 = 1.734 ×\times 10^8 J\text{ J}_

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly integrated the rotational drag equation to determine the angular velocity function ω(t)\omega(t).

You correctly computed the initial rotational kinetic energy K0K_0.

You recognized that as t→∞t \to \infty, all initial kinetic energy dissipates into heat.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Exponent squaring error

You squared ω0\omega_0 but left the exponential factor as e−(b/I)te^{-(b/I)t} instead of squaring it to e−(2b/I)te^{-(2b/I)t}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Failing to distribute the outer square exponent to all terms in a product: (a⋅e−kt)2=a2⋅e−2kt(a \cdot e^{-kt})^2 = a^2 \cdot e^{-2kt}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Power of an Exponential
  • (eu)n=enu(e^u)^n = e^{n u}

  • When computing quantities proportional to v2v^2 or ω2\omega^2 where the variable decays as e−kte^{-kt}, multiply the decay coefficient by 22 to obtain e−2kte^{-2kt}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express kinetic energy explicitly with parentheses around the full velocity term: K(t)=12I(ω(t))2=12I(ω0e−bIt)2K(t) = \frac{1}{2}I\big(\omega(t)\big)^2 = \frac{1}{2}I\left(\omega_0 e^{-\frac{b}{I}t}\right)^2.

  2. Apply the power of a power exponent rule: (e−bIt)2=e−2bIt\left(e^{-\frac{b}{I}t}\right)^2 = e^{-\frac{2b}{I}t}.

  3. Substitute the numerical coefficient: 2bI=2(1.25×10−4)4.80=5.21×10−5 s−1\frac{2b}{I} = \frac{2(1.25 \times 10^{-4})}{4.80} = 5.21 \times 10^{-5}\text{ s}^{-1}.

  4. Write the final kinetic energy function: K(t)=1.73×108e−(5.21×10−5)t JK(t) = 1.73 \times 10^8 e^{-(5.21 \times 10^{-5})t}\text{ J}.

Final answer

K(t)=K0e−2bIt=1.73×108e−(5.21×10−5)t JK(t) = K_0 e^{-\frac{2b}{I}t} = 1.73 \times 10^8 e^{-(5.21 \times 10^{-5})t}\text{ J}; K0=1.73×108 JK_0 = 1.73 \times 10^8\text{ J}; Ediss=1.73×108 JE_{\text{diss}} = 1.73 \times 10^8\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out [f(t)]2[f(t)]^2 with explicit outer brackets before expanding powers of exponentials.

  • Check decay rates physically: kinetic energy is quadratic in velocity, so it must decay twice as fast as velocity.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to square the initial angular velocity when calculating the kinetic energy, confusing linear kinetic energy or omitting the exponent.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    I(dωdt)=−bω  ⟹  ω(t)=ω0e−(b/I)tI \left(\frac{d\omega}{dt}\right) = -b\omega \implies \omega(t) = \omega_0 e^{-(b/I)t}

  2. Step 2

    K(t)=(12)Iω(t)  ⟹  K(t)=(12)Iω0e−(b/I)t=2.04×104e−(2.60×10−5)t JK(t) = \left(\frac{1}{2}\right)I\omega(t) \implies K(t) = \left(\frac{1}{2}\right)I\omega_0 e^{-(b/I)t} = 2.04 \times 10^4 e^{-(2.60 \times 10^{-5})t}\text{ J}

    Correct

    K(t)=12I[ω(t)]2=12Iω02e−2bIt=K0e−2bItK(t) = \frac{1}{2}I[\omega(t)]^2 = \frac{1}{2}I\omega_0^2 e^{-\frac{2b}{I}t} = K_0 e^{-\frac{2b}{I}t}

    Rotational kinetic energy depends on the square of angular velocity: K=12Iω2K = \frac{1}{2}I\omega^2. Because ω(t)\omega(t) is squared, the exponent doubles to −2bIt-\frac{2b}{I}t.

  3. Step 3

    K0=(12)Iω0=0.5×4.80×8.50×103=2.04×104 JK_0 = \left(\frac{1}{2}\right)I\omega_0 = 0.5 \times 4.80 \times 8.50 \times 10^3 = 2.04 \times 10^4\text{ J}

    Correct

    K0=12Iω02=12(4.80)(8.50×103)2=1.73×108 JK_0 = \frac{1}{2}I\omega_0^2 = \frac{1}{2}(4.80)(8.50 \times 10^3)^2 = 1.73 \times 10^8\text{ J}

    Your calculation followed your earlier formula for KK, but omitting ω02\omega_0^2 gave 2.04×104 J2.04 \times 10^4\text{ J} instead of 1.73×108 J1.73 \times 10^8\text{ J}.

  4. Step 4

    Ediss=K0−K(∞)=K0=2.04×104 JE_{\text{diss}} = K_0 - K(\infty) = K_0 = 2.04 \times 10^4\text{ J}

    Correct

    Ediss=K0−K(∞)=1.73×108 JE_{\text{diss}} = K_0 - K(\infty) = 1.73 \times 10^8\text{ J}

    Your reasoning that Ediss=K0−K(∞)=K0E_{\text{diss}} = K_0 - K(\infty) = K_0 is completely correct, but the numerical value inherits the earlier error from K0K_0.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly formulated the equation of motion for rotational deceleration under viscous-like drag torque.

You solved the differential equation accurately to obtain the exponential decay of ω(t)\omega(t).

You recognized that total dissipated thermal energy over an infinite time horizon equals the initial stored kinetic energy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Error: Missing Exponent

You wrote K=12IωK = \frac{1}{2}I\omega instead of K=12Iω2K = \frac{1}{2}I\omega^2, likely confusing rotational kinetic energy with a quantity linear in angular speed.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the definitions of rotational kinetic energy (K=12Iω2K = \frac{1}{2}I\omega^2, proportional to speed squared) and angular momentum (L=IωL = I\omega, proportional to speed to the first power). Omitting the square also caused you to miss the factor of 22 in the decay exponent when squaring e−(b/I)te^{-(b/I)t}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Rotational Kinetic Energy Definition
  • Just as translational kinetic energy is K=12mv2K = \frac{1}{2}mv^2, rotational kinetic energy is always K=12Iω2K = \frac{1}{2}I\omega^2.

  • Always double-check that ω\omega carries an exponent of 22 in any kinetic energy expression.

Squaring Exponential Decays
  • When ω(t)=ω0e−λt\omega(t) = \omega_0 e^{-\lambda t}, squaring gives [ω(t)]2=ω02e−2λt[\omega(t)]^2 = \omega_0^2 e^{-2\lambda t}.

  • Ensure that the decay rate for kinetic energy is twice the decay rate of angular velocity.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the standard formula for rotational kinetic energy: K(t)=12I[ω(t)]2K(t) = \frac{1}{2}I[\omega(t)]^2.

  2. Substitute ω(t)=ω0e−bIt\omega(t) = \omega_0 e^{-\frac{b}{I}t} to find K(t)=12Iω02(e−bIt)2=K0e−2bItK(t) = \frac{1}{2}I\omega_0^2 \left(e^{-\frac{b}{I}t}\right)^2 = K_0 e^{-\frac{2b}{I}t}.

  3. Compute K0=12(4.80 kg⋅m2)(8.50×103 rad/s)2=1.734×108 J≈1.73×108 JK_0 = \frac{1}{2}(4.80\text{ kg}\cdot\text{m}^2)(8.50 \times 10^3\text{ rad/s})^2 = 1.734 \times 10^8\text{ J} \approx 1.73 \times 10^8\text{ J}.

  4. Since K(∞)=0K(\infty) = 0, the total thermal dissipation is Ediss=K0−0=1.73×108 JE_{\text{diss}} = K_0 - 0 = 1.73 \times 10^8\text{ J}.

Final answer

K(t)=K0e−2bItK(t) = K_0 e^{-\frac{2b}{I}t}; K0=1.73×108 JK_0 = 1.73 \times 10^8\text{ J}; Ediss=1.73×108 JE_{\text{diss}} = 1.73 \times 10^8\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the rotational-translational analogies (m↔Im \leftrightarrow I, v↔ωv \leftrightarrow \omega, p=mv↔L=Iωp = mv \leftrightarrow L = I\omega, K=12mv2↔K=12Iω2K = \frac{1}{2}mv^2 \leftrightarrow K = \frac{1}{2}I\omega^2).

  • Perform dimensional analysis on your formulas: [Iω]=J⋅s[I\omega] = \text{J}\cdot\text{s} (angular momentum), while [Iω2]=J[I\omega^2] = \text{J} (energy).

  • Complete the targeted flashcards and practice problems below to master exponential energy decay.

OverviewACEpath Teacher's Diagnosis

03 The student assumes a constant deceleration torque based on the initial angular speed rather than an exponential decay, leading to an incorrect kinetic energy profile and lifetime calculation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T=−bω0=−1.25×10−4⋅8.50×103=−1.0625 N⋅m  ⟹  α=TI=−0.2214 rad/s2T = -b\omega_0 = -1.25 \times 10^{-4} \cdot 8.50 \times 10^3 = -1.0625\text{ N}\cdot\text{m} \implies \alpha = \frac{T}{I} = -0.2214\text{ rad/s}^2

    Correct

    Idωdt=−bω  ⟹  dωω=−bIdtI \frac{d\omega}{dt} = -b\omega \implies \frac{d\omega}{\omega} = -\frac{b}{I}dt

    You evaluated the torque as a constant using the initial speed ω0\omega_0. Because drag torque depends on instantaneous speed (τ=−bω\tau = -b\omega), the deceleration is not constant and requires separation of variables.

  2. Step 2

    ω(t)=ω0+αt=8.50×103−0.2214t  ⟹  K(t)=2.40(8.50×103−0.2214t)2 J\omega(t) = \omega_0 + \alpha t = 8.50 \times 10^3 - 0.2214t \implies K(t) = 2.40(8.50 \times 10^3 - 0.2214t)^2\text{ J}

    Correct

    ω(t)=ω0e−bIt  ⟹  K(t)=12I[ω(t)]2=K0e−2bIt\omega(t) = \omega_0 e^{-\frac{b}{I}t} \implies K(t) = \frac{1}{2}I[\omega(t)]^2 = K_0 e^{-\frac{2b}{I}t}

    Because angular acceleration is time-dependent rather than constant, kinematic formulas for constant acceleration do not apply; integrating dωω=−bIdt\frac{d\omega}{\omega} = -\frac{b}{I}dt yields an exponential decay.

  3. Step 3

    K0=12Iω02=0.5⋅4.80⋅(8.50×103)2=1.734×108 JK_0 = \frac{1}{2}I\omega_0^2 = 0.5 \cdot 4.80 \cdot (8.50 \times 10^3)^2 = 1.734 \times 10^8\text{ J}

  4. Step 4

    Ediss=K0=1.734×108 JE_{\text{diss}} = K_0 = 1.734 \times 10^8\text{ J}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the rotational kinetic energy formula K0=12Iω02K_0 = \frac{1}{2}I\omega_0^2 with the given values.

You correctly applied the principle of conservation of energy to determine that total dissipated energy equals initial stored energy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Velocity-Dependent Torque Treated as Constant

You substituted the initial angular speed ω0\omega_0 into the drag formula to get a single constant torque value.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You used constant-acceleration kinematic formulas rather than recognizing that linear velocity-dependent resistance requires setting up and solving a first-order differential equation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Torque Damping Dependence
  • If torque depends on ω\omega (e.g., τ(ω)=−bω\tau(\omega) = -b\omega), acceleration α(ω)\alpha(\omega) varies continuously with time.

  • Always write Newton's second law in differential form: Idωdt=τ(ω)I\frac{d\omega}{dt} = \tau(\omega).

Solve by Separation of Variables
  • dωω=−bIdt\frac{d\omega}{\omega} = -\frac{b}{I}dt integrates to ln⁡(ω/ω0)=−bIt\ln(\omega/\omega_0) = -\frac{b}{I}t, giving ω(t)=ω0e−bIt\omega(t) = \omega_0 e^{-\frac{b}{I}t}.

  • Separate variables and integrate with bounds from 00 to tt whenever resistance depends on speed.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up rotational dynamics: Idωdt=−bωI\frac{d\omega}{dt} = -b\omega

  2. Separate variables and integrate: ∫ω0ω(t)dωω=−bI∫0tdt  ⟹  ω(t)=ω0e−bIt\int_{\omega_0}^{\omega(t)} \frac{d\omega}{\omega} = -\frac{b}{I}\int_0^t dt \implies \omega(t) = \omega_0 e^{-\frac{b}{I}t}

  3. Substitute into kinetic energy: K(t)=12I[ω(t)]2=12Iω02e−2bIt=K0e−2bItK(t) = \frac{1}{2}I[\omega(t)]^2 = \frac{1}{2}I\omega_0^2 e^{-\frac{2b}{I}t} = K_0 e^{-\frac{2b}{I}t}

  4. Evaluate the coefficient: 2bI=2(1.25×10−4)4.80=5.21×10−5 s−1\frac{2b}{I} = \frac{2(1.25 \times 10^{-4})}{4.80} = 5.21 \times 10^{-5}\text{ s}^{-1}

Final answer

K(t)=(1.73×108 J)e−(5.21×10−5 s−1)tK(t) = (1.73 \times 10^8\text{ J})e^{-(5.21 \times 10^{-5}\text{ s}^{-1})t}, K0=1.73×108 JK_0 = 1.73 \times 10^8\text{ J}, and Ediss=1.73×108 JE_{\text{diss}} = 1.73 \times 10^8\text{ J}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice identifying whether drag/friction is constant or velocity-dependent before choosing kinematic equations.

  • Review how squaring an exponential function doubles the exponent decay constant: (e−λt)2=e−2λt(e^{-\lambda t})^2 = e^{-2\lambda t}.

Lock it in

Similar question

01

A particle of mass m=2.0 kgm = 2.0\text{ kg} experiences linear viscous drag such that its speed decreases according to v(t)=v0e−3.0tv(t) = v_0 e^{-3.0 t}, with v0=10 m/sv_0 = 10\text{ m/s}. Find the analytical formula for its kinetic energy K(t)K(t) and compute K(t)K(t) at t=0.50 st = 0.50\text{ s}.

Answer

K(t)=12m[v(t)]2=12(2.0)(10e−3.0t)2=100e−6.0t JK(t) = \frac{1}{2}m[v(t)]^2 = \frac{1}{2}(2.0)(10 e^{-3.0 t})^2 = 100 e^{-6.0 t}\text{ J}. At t=0.50 st = 0.50\text{ s}, K(0.50)=100e−3.0≈4.98 JK(0.50) = 100 e^{-3.0} \approx 4.98\text{ J}.

02

A rotational flywheel with moment of inertia I=2.5 kg⋅m2I = 2.5\text{ kg}\cdot\text{m}^2 is decelerated solely by an aerodynamic drag torque τ=−cω\tau = -c \omega, where c=0.050 N⋅m⋅sc = 0.050\text{ N}\cdot\text{m}\cdot\text{s}. If the initial angular speed is ω0=400 rad/s\omega_0 = 400\text{ rad/s}, determine the time t1/2t_{1/2} required for the flywheel to lose 50%50\% of its stored kinetic energy.

Answer

ω(t)=ω0e−(c/I)t\omega(t) = \omega_0 e^{-(c/I)t}, so K(t)=K0e−(2c/I)tK(t) = K_0 e^{-(2c/I)t}. Setting K(t1/2)=0.5K0K(t_{1/2}) = 0.5 K_0 gives e−(2c/I)t1/2=0.5  ⟹  t1/2=Iln⁡22c=2.5×0.69312(0.050)≈17.3 se^{-(2c/I)t_{1/2}} = 0.5 \implies t_{1/2} = \frac{I \ln 2}{2c} = \frac{2.5 \times 0.6931}{2(0.050)} \approx 17.3\text{ s}.

03

An inductor-resistor (LRLR) circuit has an initial current I0I_0 at t=0t = 0 that decays as i(t)=I0e−(R/L)ti(t) = I_0 e^{-(R/L)t}. (a) Express the magnetic energy UB(t)U_B(t) stored in the inductor as a function of time. (b) Verify that the total thermal energy dissipated across the resistor from t=0t = 0 to t=∞t = \infty, given by ∫0∞i2(t)R dt\int_0^\infty i^2(t) R\,dt, equals the initial stored energy U0=12LI02U_0 = \frac{1}{2}L I_0^2.

Answer

(a) UB(t)=12L[i(t)]2=12LI02e−2(R/L)t=U0e−2(R/L)tU_B(t) = \frac{1}{2}L [i(t)]^2 = \frac{1}{2}L I_0^2 e^{-2(R/L)t} = U_0 e^{-2(R/L)t}. (b) Ediss=∫0∞I02Re−2(R/L)tdt=I02R[−L2Re−2(R/L)t]0∞=12LI02=U0E_{\text{diss}} = \int_0^\infty I_0^2 R e^{-2(R/L)t} dt = I_0^2 R \left[ -\frac{L}{2R} e^{-2(R/L)t} \right]_0^\infty = \frac{1}{2}L I_0^2 = U_0.

Loading workspace…