Resources

A motor-driven turntable rotates with an angular position governed by θ(t)=14kt4−43kt3+2kt2\theta(t) = \frac{1}{4}k t^4 - \frac{4}{3}k t^3 + 2k t^2, where k=1.50 rad/s4k = 1.50\text{ rad/s}^4 and t≥0 st \ge 0\text{ s}. Identify the critical time threshold tstop>0 st_{\text{stop}} > 0\text{ s} at which the turntable experiences instantaneous rest (impending reversal where ω=0 rad/s\omega = 0\text{ rad/s}), and evaluate the instantaneous angular acceleration α\alpha at that exact reversal boundary.

Answer and steps

Final answer

tstop=2.00 st_{\text{stop}} = 2.00\text{ s}, α(2.00 s)=6.00 rad/s2\alpha(2.00\text{ s}) = 6.00\text{ rad/s}^2

Steps

01

Identify the Kinematic Relationship and Stopping Time

In rotational kinematics, angular position θ(t)\theta(t), angular velocity ω(t)\omega(t), and angular acceleration α(t)\alpha(t) are connected through successive time derivatives: ω(t)=dθdt,α(t)=dωdt\omega(t) = \frac{d\theta}{dt}, \quad \alpha(t) = \frac{d\omega}{dt}

An instantaneous rest (reversal boundary) occurs when the angular velocity drops to zero: ω(t)=0 rad/s\omega(t) = 0\text{ rad/s}

Evaluating the governing rate of rotation for the turntable yields the quadratic velocity relation: ω(t)=k(3t2−8t+4)\omega(t) = k(3t^2 - 8t + 4)

To determine the critical time threshold tstop>0 st_{\text{stop}} > 0\text{ s}, set ω(t)=0\omega(t) = 0: 3t2−8t+4=03t^2 - 8t + 4 = 0

Factoring the quadratic expression: (t−2)(3t−2)=0(t - 2)(3t - 2) = 0

This yields two positive roots: t1=23 s≈0.67 s,t2=2.00 st_1 = \frac{2}{3}\text{ s} \approx 0.67\text{ s}, \quad t_2 = 2.00\text{ s}

The critical time threshold corresponding to the reversal boundary is: tstop=2.00 st_{\text{stop}} = 2.00\text{ s}


02

Evaluate Instantaneous Angular Acceleration at the Boundary

The instantaneous angular acceleration α(t)\alpha(t) is the first time derivative of angular velocity: α(t)=dωdt=ddt[k(3t2−8t+4)]=k(6t−8)\alpha(t) = \frac{d\omega}{dt} = \frac{d}{dt}\left[k(3t^2 - 8t + 4)\right] = k(6t - 8)

Substitute the given constant k=1.50 rad/s4k = 1.50\text{ rad/s}^4 and the critical time tstop=2.00 st_{\text{stop}} = 2.00\text{ s}: α(2.00 s)=1.50⋅[6(2.00)−8]\alpha(2.00\text{ s}) = 1.50 \cdot \left[6(2.00) - 8\right] α(2.00 s)=1.50⋅(12.00−8)=1.50⋅4=6.00 rad/s2\alpha(2.00\text{ s}) = 1.50 \cdot (12.00 - 8) = 1.50 \cdot 4 = 6.00\text{ rad/s}^2


Key Takeaway & Common Pitfalls

  • Instantaneous Rest vs. Zero Acceleration: At an instantaneous stopping point (ω=0\omega = 0), the object does not necessarily have zero acceleration. A non-zero angular acceleration α≠0\alpha \ne 0 at that exact instant means the turntable is actively changing its state of motion (reversing direction).
  • Units Consistency: Differentiating with respect to time increases the power of seconds in the denominator: [θ]=rad[\theta] = \text{rad}, [ω]=rad/s[\omega] = \text{rad/s}, and [α]=rad/s2[\alpha] = \text{rad/s}^2.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misdifferentiates θ(t) by omitting the power-rule factor when taking the derivative of the cubic term, leading to an incorrect stopping time and subsequent angular acceleration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ω\omega(t) = dθdt\frac{d\theta}{dt} = kt^3 - (43)\left(\frac{4}{3}\right)kt^2 + 4kt

    Correct

    ω\omega(t) = dθdt\frac{d\theta}{dt} = kt^3 - 4kt^2 + 4kt

    You correctly set up ω(t)=dθdt\omega(t) = \frac{d\theta}{dt} and differentiated the first and last terms accurately. However, for the middle term −43kt3-\frac{4}{3}kt^3, the power rule requires multiplying the coefficient by 33: ddt(−43kt3)=−43k⋅3t2=−4kt2\frac{d}{dt}\left(-\frac{4}{3}kt^3\right) = -\frac{4}{3}k \cdot 3t^2 = -4kt^2. You wrote −43kt2-\frac{4}{3}kt^2, missing the factor of 33.

  2. Step 2

    kt(t2−43t+4)\left(t^2 - \frac{4}{3}t + 4\right) = 0   ⟹  \implies t_{stop\text{stop}} = 2.00 s\text{ s}_

    Correct

    kt(t^2 - 4t + 4) = 0   ⟹  \implies kt(t - 2)^2 = 0   ⟹  \implies t_{stop\text{stop}} = 2.00 s\text{ s}_

    You correctly factored out ktkt and set the expression to zero. Although your stated value tstop=2.00 st_{\text{stop}} = 2.00\text{ s} matches the correct stopping time, it does not mathematically follow from your quadratic t2−43t+4=0t^2 - \frac{4}{3}t + 4 = 0 (which has no real roots). With the correct derivative, the quadratic factors cleanly as (t−2)2=0(t - 2)^2 = 0.

  3. Step 3

    α\alpha(t) = 3kt^2 - (83)\left(\frac{8}{3}\right)kt + 4k

    Correct

    α\alpha(t) = dωdt\frac{d\omega}{dt} = 3kt^2 - 8kt + 4k

    You correctly differentiated your expression for ω(t)\omega(t) with respect to time, but because that expression was missing the factor of 33 on the quadratic term, this acceleration expression is affected.

  4. Step 4

    α\alpha(2) = 1.50 ×\times (3(4)−(83)(2)+4)\left(3(4) - \left(\frac{8}{3}\right)(2) + 4\right)   ⟹  \implies α\alpha(2) = 16.0 rad/s\text{ rad/s}^2

    Correct

    α(2.00 s)=6.00 rad/s2\alpha(2.00\text{ s}) = 6.00\text{ rad/s}^2

    Your arithmetic evaluating your expression at t=2.00 st = 2.00\text{ s} with k=1.50 rad/s4k = 1.50\text{ rad/s}^4 was performed correctly, but the final numerical value is incorrect due to the propagated differentiation error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that angular velocity is the first time derivative of angular position, ω(t)=dθdt\omega(t) = \frac{d\theta}{dt}.

You correctly applied the power rule to differentiate 14kt4\frac{1}{4}kt^4 into kt3kt^3 and 2kt22kt^2 into 4kt4kt.

You correctly recognized that angular acceleration is the time derivative of angular velocity, α(t)=dωdt\alpha(t) = \frac{d\omega}{dt}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Calculus / Power Rule Differentiation Error

Omitting the exponent factor 33 when differentiating the term −43kt3-\frac{4}{3}kt^3.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When applying the power rule ddt(ctn)=c⋅ntn−1\frac{d}{dt}(c t^n) = c \cdot n t^{n-1} to a term with a fractional coefficient, you reduced the exponent by one but forgot to multiply the coefficient by the original power nn, writing −43kt2-\frac{4}{3}kt^2 instead of −4kt2-4kt^2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Power Rule with Fractional Coefficients
  • ddt(ctn)=c⋅ntn−1\frac{d}{dt}(c t^n) = c \cdot n t^{n-1}

  • Always write out the multiplication of the coefficient by the original exponent explicitly before simplifying the fraction.

Checking Roots of the Factored Velocity
  • For instantaneous rest, setting ω(t)=0\omega(t) = 0 must yield real roots that satisfy the original factored equation.

  • Substitute the candidate root back into the quadratic factor to confirm it actually evaluates to zero before proceeding.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Differentiate θ(t)=14kt4−43kt3+2kt2\theta(t) = \frac{1}{4}kt^4 - \frac{4}{3}kt^3 + 2kt^2 term-by-term using the power rule: ω(t)=dθdt=kt3−4kt2+4kt\omega(t) = \frac{d\theta}{dt} = kt^3 - 4kt^2 + 4kt.

  2. Factor out ktkt: ω(t)=kt(t2−4t+4)=kt(t−2)2\omega(t) = kt(t^2 - 4t + 4) = kt(t - 2)^2.

  3. Set ω(t)=0\omega(t) = 0 for t>0t > 0: kt(t−2)2=0  ⟹  tstop=2.00 skt(t - 2)^2 = 0 \implies t_{\text{stop}} = 2.00\text{ s}.

Final answer

tstop=2.00 st_{\text{stop}} = 2.00\text{ s}, α(2.00 s)=6.00 rad/s2\alpha(2.00\text{ s}) = 6.00\text{ rad/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Review power-rule differentiation when coefficients are fractions, ensuring the exponent is multiplied before simplifying.

  • Practice verifying quadratic roots by back-substitution before using them in subsequent kinematic steps.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the condition for instantaneous rest (ω = 0) with the condition for zero angular position (θ = 0), setting θ(t) = 0 to determine the stopping time.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    θ(t)=0  ⟹  14kt4−43kt3+2kt2=0  ⟹  kt2(14t2−43t+2)=0  ⟹  3t2−16t+24=0  ⟹  tstop=2.45 s\theta(t) = 0 \implies \frac{1}{4}kt^4 - \frac{4}{3}kt^3 + 2kt^2 = 0 \implies kt^2\left(\frac{1}{4}t^2 - \frac{4}{3}t + 2\right) = 0 \implies 3t^2 - 16t + 24 = 0 \implies t_{\text{stop}} = 2.45\text{ s}

    Correct

    ω(t)=0  ⟹  3t2−8t+4=0  ⟹  (t−2)(3t−2)=0  ⟹  tstop=2.00 s\omega(t) = 0 \implies 3t^2 - 8t + 4 = 0 \implies (t - 2)(3t - 2) = 0 \implies t_{\text{stop}} = 2.00\text{ s}

    You set the angular position θ(t)=0\theta(t) = 0 to find the stopping time. Instantaneous rest and motion reversal occur when the angular velocity is zero (ω(t)=dθdt=0\omega(t) = \frac{d\theta}{dt} = 0), not when the object reaches angular position zero.

  2. Step 2

    ω(t)=kt3−4kt2+4kt  ⟹  α(t)=3kt2−8kt+4k  ⟹  α(2.45)=1.50×(3(2.45)2−8(2.45)+4)=3.61 rad/s2\omega(t) = kt^3 - 4kt^2 + 4kt \implies \alpha(t) = 3kt^2 - 8kt + 4k \implies \alpha(2.45) = 1.50 \times (3(2.45)^2 - 8(2.45) + 4) = 3.61\text{ rad/s}^2

    Correct

    α(t)=dωdt=k(6t−8)  ⟹  α(2.00 s)=1.50×[6(2.00)−8]=6.00 rad/s2\alpha(t) = \frac{d\omega}{dt} = k(6t - 8) \implies \alpha(2.00\text{ s}) = 1.50 \times [6(2.00) - 8] = 6.00\text{ rad/s}^2

    Your evaluation of acceleration was affected by substituting the incorrect time threshold t=2.45 st = 2.45\text{ s} from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that finding angular acceleration requires taking time derivatives of rotational kinematic quantities.

You accurately substituted your calculated time value and constant kk into your algebraic expression for acceleration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing Position with Velocity

You equated the angular position θ(t)\theta(t) to zero instead of setting angular velocity ω(t)=0\omega(t) = 0 to identify the stopping boundary.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated being at the reference origin (position θ=0\theta = 0) with coming to an instantaneous stop (rate of rotation ω=0\omega = 0). In kinematics, an object can be moving rapidly through θ=0\theta = 0, while it can stop and reverse direction at any arbitrary angle θ≠0\theta \neq 0.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define Instantaneous Rest
  • Instantaneous rest or impending reversal occurs when the first time derivative of position is zero: ω(t)=dθdt=0\omega(t) = \frac{d\theta}{dt} = 0.

  • Always identify the stopping condition with velocity ω=0\omega = 0, never with position θ=0\theta = 0.

Evaluate Acceleration at Reversal
  • At an instantaneous turnaround point, ω=0\omega = 0 but angular acceleration α=dωdt\alpha = \frac{d\omega}{dt} is typically non-zero.

  • Differentiate ω(t)\omega(t) to get α(t)\alpha(t), then substitute the valid stopping root tstopt_{\text{stop}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the instantaneous angular velocity to zero to find the stopping condition: ω(t)=k(3t2−8t+4)=0\omega(t) = k(3t^2 - 8t + 4) = 0.

  2. Factor the quadratic expression: (t−2)(3t−2)=0(t - 2)(3t - 2) = 0, giving the critical reversal time threshold tstop=2.00 st_{\text{stop}} = 2.00\text{ s}.

  3. Differentiate ω(t)\omega(t) with respect to time to obtain angular acceleration: α(t)=dωdt=k(6t−8)\alpha(t) = \frac{d\omega}{dt} = k(6t - 8).

  4. Substitute k=1.50 rad/s4k = 1.50\text{ rad/s}^4 and t=2.00 st = 2.00\text{ s}: α(2.00 s)=1.50×(12−8)=6.00 rad/s2\alpha(2.00\text{ s}) = 1.50 \times (12 - 8) = 6.00\text{ rad/s}^2.

Final answer

tstop=2.00 st_{\text{stop}} = 2.00\text{ s}, α(2.00 s)=6.00 rad/s2\alpha(2.00\text{ s}) = 6.00\text{ rad/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Before setting up equations, explicitly write down what physical condition each variable describes: θ\theta is location, ω\omega is rotation rate, and α\alpha is rate of change of rotation.

  • Practice identifying 'keyword-to-variable' mappings, such as 'instantaneous rest' →ω=0\rightarrow \omega = 0 and 'passes reference point' →θ=0\rightarrow \theta = 0.

OverviewACEpath Teacher's Diagnosis

03 The student calculates angular acceleration by directly evaluating ω/t instead of taking the time derivative dω/dt.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ω(t)=dθdt=kt3−4kt2+4kt  ⟹  kt(t−2)2=0  ⟹  tstop=2.00 s\omega(t) = \frac{d\theta}{dt} = k t^3 - 4k t^2 + 4k t \implies k t(t - 2)^2 = 0 \implies t_{\text{stop}} = 2.00\text{ s}

  2. Step 2

    α=ω(tstop)tstop  ⟹  ω(2)=0 rad/s  ⟹  α=02.00=0 rad/s2\alpha = \frac{\omega(t_{\text{stop}})}{t_{\text{stop}}} \implies \omega(2) = 0\text{ rad/s} \implies \alpha = \frac{0}{2.00} = 0\text{ rad/s}^2

    Correct

    α(t)=dωdt=k(6t−8)  ⟹  α(2.00 s)=1.50⋅[6(2.00)−8]=6.00 rad/s2\alpha(t) = \frac{d\omega}{dt} = k(6t - 8) \implies \alpha(2.00\text{ s}) = 1.50 \cdot [6(2.00) - 8] = 6.00\text{ rad/s}^2

    Instantaneous angular acceleration is defined as the time derivative of angular velocity, α(t)=dωdt\alpha(t) = \frac{d\omega}{dt}, rather than the ratio ωt\frac{\omega}{t}. Dividing an instantaneous velocity of zero by time will always falsely yield zero acceleration, masking the rotational acceleration causing the impending reversal.

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that impending reversal and instantaneous rest require setting the angular velocity to zero.

You correctly identified the critical stopping time tstop=2.00 st_{\text{stop}} = 2.00\text{ s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Quotient instead of time derivative for instantaneous acceleration

You used the simple quotient ωt\frac{\omega}{t} instead of evaluating the derivative dωdt\frac{d\omega}{dt}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing an instantaneous rate of change with a simple ratio of kinematic variables at a single instant, leading to the false assumption that an object at instantaneous rest must have zero acceleration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Derivative vs. Ratio
  • Instantaneous angular acceleration is α(t)=dωdt\alpha(t) = \frac{d\omega}{dt}, whereas ΔωΔt\frac{\Delta \omega}{\Delta t} represents average angular acceleration over an interval.

  • Always differentiate ω(t)\omega(t) with respect to time first to obtain the function α(t)\alpha(t) before substituting the specific time value.

Instantaneous Rest Condition
  • An instantaneous velocity of zero (ω=0\omega = 0) does not imply zero acceleration (α=0\alpha = 0).

  • Treat ω=0\omega = 0 purely as a directional turning point where acceleration can be non-zero.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the first time derivative of angular velocity: α(t)=dωdt=k(6t−8)\alpha(t) = \frac{d\omega}{dt} = k(6t - 8).

  2. Substitute k=1.50 rad/s4k = 1.50\text{ rad/s}^4 and t=2.00 st = 2.00\text{ s} into α(t)\alpha(t): α(2.00 s)=1.50⋅[6(2.00)−8]=1.50⋅(12.00−8)\alpha(2.00\text{ s}) = 1.50 \cdot [6(2.00) - 8] = 1.50 \cdot (12.00 - 8).

  3. Compute the final value: α(2.00 s)=1.50⋅4=6.00 rad/s2\alpha(2.00\text{ s}) = 1.50 \cdot 4 = 6.00\text{ rad/s}^2.

Final answer

tstop=2.00 st_{\text{stop}} = 2.00\text{ s}, α(2.00 s)=6.00 rad/s2\alpha(2.00\text{ s}) = 6.00\text{ rad/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice finding instantaneous acceleration by taking the derivative dωdt\frac{d\omega}{dt} before substituting any numerical time values.

  • Review turning-point kinematics to build intuition for why acceleration is non-zero when velocity passes through zero.

Lock it in

Similar question

01

A flywheel rotates with an angular position θ(t)=13ct3−52ct2+6ct\theta(t) = \frac{1}{3}c t^3 - \frac{5}{2}c t^2 + 6c t, where c=2.0 rad/s3c = 2.0\text{ rad/s}^3 and t≥0 st \ge 0\text{ s}. Find all positive times t>0 st > 0\text{ s} at which the flywheel is instantaneously at rest.

Answer

Differentiating yields ω(t)=dθdt=ct2−5ct+6c=c(t−2)(t−3)\omega(t) = \frac{d\theta}{dt} = c t^2 - 5c t + 6c = c(t - 2)(t - 3). Setting ω(t)=0\omega(t) = 0 gives t=2.0 st = 2.0\text{ s} and t=3.0 st = 3.0\text{ s}.

02

A centrifuge rotor follows θ(t)=14t4−2t3+4t2\theta(t) = \frac{1}{4}t^4 - 2t^3 + 4t^2 (with θ\theta in radians and tt in seconds). Determine the stopping times t>0 st > 0\text{ s} where ω=0 rad/s\omega = 0\text{ rad/s}, and evaluate the angular acceleration α\alpha at each stopping time.

Answer

Differentiating gives ω(t)=t3−6t2+8t=t(t−2)(t−4)=0\omega(t) = t^3 - 6t^2 + 8t = t(t - 2)(t - 4) = 0, yielding positive stopping times t=2.0 st = 2.0\text{ s} and t=4.0 st = 4.0\text{ s}. The acceleration is α(t)=3t2−12t+8\alpha(t) = 3t^2 - 12t + 8. At t=2.0 st = 2.0\text{ s}, α(2)=3(4)−24+8=−4.0 rad/s2\alpha(2) = 3(4) - 24 + 8 = -4.0\text{ rad/s}^2. At t=4.0 st = 4.0\text{ s}, α(4)=3(16)−48+8=8.0 rad/s2\alpha(4) = 3(16) - 48 + 8 = 8.0\text{ rad/s}^2.

03

An optical scanner mirrors an angular displacement θ(t)=25bt5−83bt3+6bt\theta(t) = \frac{2}{5}b t^5 - \frac{8}{3}b t^3 + 6b t with b=0.50 rad/s5b = 0.50\text{ rad/s}^5. Find the earliest stopping time t>0 st > 0\text{ s} and evaluate the angular acceleration α\alpha at that exact instant.

Answer

Differentiating yields ω(t)=2bt4−8bt2+6b=2b(t2−1)(t2−3)=0\omega(t) = 2b t^4 - 8b t^2 + 6b = 2b(t^2 - 1)(t^2 - 3) = 0. The earliest positive root is t=1.0 st = 1.0\text{ s}. Differentiating again gives α(t)=8bt3−16bt\alpha(t) = 8b t^3 - 16b t. Substituting t=1.0 st = 1.0\text{ s} and b=0.50 rad/s5b = 0.50\text{ rad/s}^5 yields α(1.0)=8(0.50)(1)−16(0.50)(1)=4.0−8.0=−4.0 rad/s2\alpha(1.0) = 8(0.50)(1) - 16(0.50)(1) = 4.0 - 8.0 = -4.0\text{ rad/s}^2.

Loading workspace…