Resources
A robotic transport vehicle starts from rest at the bottom of a smooth, straight incline angled at above the horizontal. The vehicle drives up along the incline under a constant mechanical drive acceleration of for . At that exact moment, the drive motor cuts out completely, and the vehicle coasts freely up the incline subject solely to the component of gravitational acceleration parallel to the slope (). Find the total displacement along the incline from the starting point to the vehicle's momentary stopping point.
Answer and steps
Final answer
Steps
The motion takes place entirely along the one-dimensional axis parallel to the incline. We can divide the motion into two consecutive stages: the powered acceleration phase and the unpowered coasting phase.
Phase 1: Powered Drive Up the Slope
The vehicle starts from rest () and accelerates up the incline at for .
- Displacement during Phase 1 (): Using the kinematic displacement equation:
- Velocity at the end of Phase 1 ():
Phase 2: Coasting Up the Slope Against Gravity
When the motor cuts out, the vehicle enters a coasting phase with an initial speed of and comes to a momentary stop ().
-
Acceleration down the slope (): The only force acting along the frictionless incline is the component of gravity directed down the slope:
Pitfall: Ensure you use the component of gravitational acceleration parallel to the slope (), not the full vertical acceleration .
- Displacement during Phase 2 (): Using the time-independent kinematic equation:
Total Displacement
Sum the displacements from both stages:
Typical errors
01 The student forgets to resolve gravity along the incline and uses full gravitational acceleration g instead of g * sin(θ) during the coasting phase.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Because the vehicle is constrained to move along the slope angled at , only the component of gravity directed along the incline decelerates it, which is , not the full vertical acceleration .
- Step 3Correct
Your kinematic relation was set up correctly, but substituting instead of caused to be evaluated as half of its true value.
- Step 4Correct
Your method of summing the displacements from both stages was correct, but the final sum carried over the error from .
WHAT YOU DID WELL
Compliments from Your TeacherYou partitioned the two-stage motion clearly into separate powered and unpowered phases.
You correctly used kinematic equations to find the displacement and velocity at the end of the first phase.
You properly recognized that the final velocity of Phase 1 serves as the initial velocity for Phase 2.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the coasting acceleration along the ramp as equal to free-fall acceleration , overlooking that motion constrained to a plane tilted at angle is governed only by the parallel gravity component .
REASONING PATH
Your ACEpath teacher’s suggested approach- Resolve Acceleration Along the Motion Axis
For an object sliding or rolling freely along a frictionless incline tilted at angle above the horizontal, the acceleration parallel to the incline is .
Always draw a right triangle resolving the vertical gravity vector into perpendicular () and parallel () components relative to the incline surface before writing kinematic equations.
CORRECTED PATH
ACEpath Teacher's DemonstrationFind the deceleration along the incline: .
Compute the coasting displacement using : .
Calculate total displacement: .
02 The student uses the cosine of the angle instead of the sine to find the parallel component of gravity along the incline.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
The component of gravitational acceleration acting down along an incline of angle relative to the horizontal is , not . The cosine component, , is perpendicular to the incline.
- Step 4Correct
Your kinematic formula for stopping distance is correct, but the numerical result is affected by substituting the incorrect acceleration value from Step 3.
- Step 5Correct
You correctly added the displacements from both stages, but the final sum is affected by the error in .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly split the vehicle's motion into two distinct kinematic phases.
You calculated both the displacement and terminal velocity of the powered phase accurately.
You chose the correct time-independent kinematic relation to express the stopping distance in terms of initial velocity and deceleration.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou accidentally selected rather than when projecting the gravitational acceleration vector along the incline surface.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the parallel and perpendicular vector projections of gravity along a ramp inclined at angle to the horizontal. The parallel downhill component is opposite to the angle in the vector triangle, requiring .
REASONING PATH
Your ACEpath teacher’s suggested approach- Incline Component Rule
For a ramp inclined at angle above the horizontal, the downhill component of gravity is , while the normal (perpendicular) component is .
Always draw the right-angled force triangle at the ramp surface to confirm that the component along the incline lies opposite to .
- Extreme-Angle Sanity Check
If the incline flattens to , gravity along the surface must vanish (). If the incline becomes a vertical wall (), gravity along the surface must equal full free fall ().
Mentally test ; because , using cosine along the slope produces an impossible non-zero downhill acceleration on a flat floor.
CORRECTED PATH
ACEpath Teacher's DemonstrationCompute the parallel deceleration down the slope: .
Find the coasting distance until rest: .
Sum the two stage displacements: .
03 The student only calculates the displacement during the coasting phase and neglects the initial displacement during the powered phase.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
You set the total displacement equal only to the coasting distance. The vehicle also traveled a displacement of while the motor was driving it forward.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the velocity at the end of the powered stage.
You correctly resolved gravity along the inclined plane.
You correctly applied the kinematic equation to find the coasting distance.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated the stopping distance of the second phase as the entire displacement from the starting point.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisIn multi-stage motion problems with piecewise constant acceleration, each stage contributes to the overall position change. You focused solely on finding how far the vehicle coasts after engine shutoff, forgetting that the vehicle had already traveled a significant distance during the powered run-up.
REASONING PATH
Your ACEpath teacher’s suggested approach- Partition Multi-Stage Motion
Total displacement across consecutive stages is the sum of the individual displacements: .
Always compute and sum the displacement for every stage of motion where acceleration changes.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the displacement during Stage 1: .
Sum the displacements from both stages: .
Lock it in
What is the magnitude of acceleration for an object sliding freely along a frictionless incline angled at to the horizontal?
. Only the component of gravity parallel to the incline's surface acts along the direction of motion.
Similar question
A sled is launched up a frictionless slope inclined at above the horizontal with an initial speed of . Using , calculate the distance the sled travels along the slope before momentarily coming to rest.
Answer
. The deceleration along the incline is . Using , we have .
A motorized cart starts from rest and accelerates up a frictionless incline at for . The motor then shuts off, and the cart coasts until it momentarily stops. Find the total distance traveled up the slope from start to stop ().
Answer
. Phase 1: and . Phase 2: , so . Total distance .
A toy car is pushed up an incline of angle where . It passes point A moving upward at . Simultaneously, a retarding motor force adds an extra constant deceleration of down the slope in addition to gravity (). How far up the slope from point A does the car come to a momentary stop?
Answer
. The gravitational acceleration component down the slope is . Total deceleration along the slope is . Using , .