Resources

A simple pendulum consists of a small bob of mass m=0.650 kgm = 0.650\text{ kg} suspended from a light, rigid rod of length L=1.25 mL = 1.25\text{ m}. The pendulum is released from rest at an initial angle θ0=60.0∘\theta_0 = 60.0^\circ relative to the downward vertical. As the bob swings downward under gravity (g=9.80 m/s2g = 9.80\text{ m/s}^2) with negligible friction, find the angle θ1\theta_1 relative to the downward vertical at which the kinetic energy of the bob equals exactly three times its gravitational potential energy (taking the reference level U=0U = 0 at the lowest point of the swing).

Answer and steps

Final answer

θ1=28.96∘\theta_1 = 28.96^\circ (or 29.0∘29.0^\circ)

Steps

01

Set the Reference Level and Express Gravitational Potential Energy

Choose the lowest point of the swing (where the rod hangs vertically downward) as the reference height y=0y = 0, so U=0U = 0 there.

For any deflection angle θ\theta relative to the downward vertical, the vertical position of the bob above the lowest point is: h(θ)=L−Lcos⁡θ=L(1−cos⁡θ)h(\theta) = L - L\cos\theta = L(1 - \cos\theta)

The gravitational potential energy at angle θ\theta is: U(θ)=mgh(θ)=mgL(1−cos⁡θ)U(\theta) = mgh(\theta) = mgL(1 - \cos\theta)


02

Determine the Total Mechanical Energy

The pendulum is released from rest at θ0=60.0∘\theta_0 = 60.0^\circ, meaning its initial kinetic energy is zero (K0=0K_0 = 0).

Because air resistance and friction are negligible, mechanical energy is conserved: E=K0+U0=0+mgL(1−cos⁡θ0)=mgL(1−cos⁡60.0∘)E = K_0 + U_0 = 0 + mgL(1 - \cos\theta_0) = mgL(1 - \cos 60.0^\circ)

Since cos⁡60.0∘=0.5\cos 60.0^\circ = 0.5: E=mgL(1−0.5)=0.5 mgLE = mgL(1 - 0.5) = 0.5\,mgL


03

Apply the Condition on Kinetic and Potential Energy

At the unknown angle θ1\theta_1, the kinetic energy is three times the potential energy: K1=3U1K_1 = 3U_1

By conservation of total mechanical energy: E=K1+U1=3U1+U1=4U1E = K_1 + U_1 = 3U_1 + U_1 = 4U_1

Solving for U1U_1: U1=14EU_1 = \frac{1}{4}E


04

Solve for the Angle θ1\theta_1

Substitute the expressions for U1U_1 and EE: mgL(1−cos⁡θ1)=14[mgL(1−cos⁡θ0)]mgL(1 - \cos\theta_1) = \frac{1}{4}\left[mgL(1 - \cos\theta_0)\right]

Notice that the mass mm, gravitational acceleration gg, and length LL cancel out entirely: 1−cos⁡θ1=14(1−cos⁡60.0∘)1 - \cos\theta_1 = \frac{1}{4}(1 - \cos 60.0^\circ)

1−cos⁡θ1=14(0.5)=0.1251 - \cos\theta_1 = \frac{1}{4}(0.5) = 0.125

cos⁡θ1=1−0.125=0.875=78\cos\theta_1 = 1 - 0.125 = 0.875 = \frac{7}{8}

Taking the inverse cosine: θ1=arccos⁡(0.875)≈28.96∘ (or 29.0∘)\theta_1 = \arccos(0.875) \approx 28.96^\circ \text{ (or } 29.0^\circ\text{)}

Key Pitfall: A common mistake is setting h=Lcos⁡θh = L\cos\theta instead of h=L(1−cos⁡θ)h = L(1 - \cos\theta). Remember that measuring height upward from the bottom gives h=0h = 0 when θ=0∘\theta = 0^\circ, which requires the factor (1−cos⁡θ)(1 - \cos\theta).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the energy partition by setting the total energy equal to 3U instead of 4U when K = 3U.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    U0=mgL(1−cos⁡60.0∘)=0.500mgLU_0 = mgL(1 - \cos 60.0^\circ) = 0.500mgL

  2. Step 2

    K=3U  ⟹  E=K=3UK = 3U \implies E = K = 3U

    Correct

    E=K+U=3U+U=4U  ⟹  U=14EE = K + U = 3U + U = 4U \implies U = \frac{1}{4}E

    Total mechanical energy is the sum of both kinetic and potential energy (E=K+UE = K + U). Substituting K=3UK = 3U gives E=3U+U=4UE = 3U + U = 4U, so the potential energy is U=14EU = \frac{1}{4}E, not 13E\frac{1}{3}E.

  3. Step 3

    0.500mgL=3mgL(1−cos⁡θ1)  ⟹  1−cos⁡θ1=0.5003=0.167  ⟹  cos⁡θ1=0.8330.500mgL = 3mgL(1 - \cos\theta_1) \implies 1 - \cos\theta_1 = \frac{0.500}{3} = 0.167 \implies \cos\theta_1 = 0.833

    Correct

    1−cos⁡θ1=0.5004=0.125  ⟹  cos⁡θ1=0.8751 - \cos\theta_1 = \frac{0.500}{4} = 0.125 \implies \cos\theta_1 = 0.875

    Your algebraic rearrangement was carried out correctly, but it used the incorrect factor of 33 instead of 44 from Step 2.

  4. Step 4

    θ1=arccos⁡(0.833)=33.6∘\theta_1 = \arccos(0.833) = 33.6^\circ

    Correct

    θ1=arccos⁡(0.875)≈29.0∘\theta_1 = \arccos(0.875) \approx 29.0^\circ

    Evaluating arccos⁡(0.833)\arccos(0.833) accurately yields 33.6∘33.6^\circ, which follows directly from your earlier partition error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly expressed gravitational potential energy as a function of the deflection angle using h(θ)=L(1−cos⁡θ)h(\theta) = L(1 - \cos\theta).

You recognized that the pendulum is released from rest, meaning initial mechanical energy consists entirely of potential energy.

You successfully canceled out mass mm, length LL, and gravitational acceleration gg to isolate cos⁡θ1\cos\theta_1.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Energy Partition Ratio Omission

No, this is a conceptual misunderstanding of how total energy is partitioned between kinetic and potential energy components.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You equated the total energy EE directly to kinetic energy K=3UK = 3U instead of remembering that total mechanical energy is conserved as the sum of kinetic and potential energies, E=K+UE = K + U. When kinetic energy is three times potential energy, potential energy accounts for one part out of four total parts (U=11+3E=14EU = \frac{1}{1+3}E = \frac{1}{4}E).

REASONING PATH
Your ACEpath teacher’s suggested approach
Partitioning Total Energy from a Ratio
  • If K=nUK = nU, then total mechanical energy is E=K+U=nU+U=(n+1)UE = K + U = nU + U = (n + 1)U.

  • Always write out the fundamental definition E=K+UE = K + U before substituting the proportional condition.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express total mechanical energy: E=K1+U1=3U1+U1=4U1E = K_1 + U_1 = 3U_1 + U_1 = 4U_1.

  2. Solve for potential energy: U1=14E=14(0.500mgL)=0.125mgLU_1 = \frac{1}{4}E = \frac{1}{4}(0.500mgL) = 0.125mgL.

  3. Equate to height formula: mgL(1−cos⁡θ1)=0.125mgL  ⟹  1−cos⁡θ1=0.125mgL(1 - \cos\theta_1) = 0.125mgL \implies 1 - \cos\theta_1 = 0.125.

  4. Solve for the angle: cos⁡θ1=0.875  ⟹  θ1=arccos⁡(0.875)≈28.96∘\cos\theta_1 = 0.875 \implies \theta_1 = \arccos(0.875) \approx 28.96^\circ.

Final answer

θ1≈29.0∘\theta_1 \approx 29.0^\circ (or 28.96∘28.96^\circ)

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down E=K+UE = K + U explicitly in every conservation of energy problem before making substitutions.

  • Practice ratio partitioning: whenever quantity AA is nn times quantity BB and their sum is CC, express B=1n+1CB = \frac{1}{n+1}C.

OverviewACEpath Teacher's Diagnosis

02 The student misidentifies the height above the reference level as L cos θ instead of L(1 - cos θ).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    h=Lcos⁡θ  ⟹  E=mgLcos⁡60.0∘=0.500mgLh = L\cos\theta \implies E = mgL\cos 60.0^\circ = 0.500mgL

    Correct

    h(θ)=L(1−cos⁡θ)  ⟹  E=mgL(1−cos⁡60.0∘)=0.500mgLh(\theta) = L(1 - \cos\theta) \implies E = mgL(1 - \cos 60.0^\circ) = 0.500mgL

    You defined the height from the bottom reference line as Lcos⁡θL\cos\theta. However, Lcos⁡θL\cos\theta represents the vertical distance from the pivot down to the bob. Since the reference level U=0U = 0 is at the lowest point of the swing (a distance LL below the pivot), the height above the bottom is h=L−Lcos⁡θ=L(1−cos⁡θ)h = L - L\cos\theta = L(1 - \cos\theta).

  2. Step 2

    K+U=E  ⟹  3U+U=4U=EK + U = E \implies 3U + U = 4U = E

  3. Step 3

    4mgLcos⁡θ1=0.500mgL  ⟹  cos⁡θ1=0.5004=0.1254mgL\cos\theta_1 = 0.500mgL \implies \cos\theta_1 = \frac{0.500}{4} = 0.125

    Correct

    4mgL(1−cos⁡θ1)=0.500mgL  ⟹  1−cos⁡θ1=0.125  ⟹  cos⁡θ1=0.8754mgL(1 - \cos\theta_1) = 0.500mgL \implies 1 - \cos\theta_1 = 0.125 \implies \cos\theta_1 = 0.875

    Your algebraic rearrangement was carried out correctly, but the equation inherited the incorrect height expression from Step 1.

  4. Step 4

    θ1=arccos⁡(0.125)=82.8∘\theta_1 = \arccos(0.125) = 82.8^\circ

    Correct

    θ1=arccos⁡(0.875)≈29.0∘\theta_1 = \arccos(0.875) \approx 29.0^\circ

    Your inverse cosine calculation followed directly from your previous line, but yielded an angle larger than the release angle of 60.0∘60.0^\circ, which is physically impossible for a pendulum released from rest swinging downward.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly stated and applied the conservation of mechanical energy principle.

You correctly combined K1=3U1K_1 = 3U_1 with E=K1+U1E = K_1 + U_1 to deduce E=4U1E = 4U_1.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Geometry of Pendulum Height

You used the adjacent leg of the right triangle (Lcos⁡θL\cos\theta) as the height above the reference level rather than the remaining vertical distance to the lowest point.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the coordinate distance from the pivot with the vertical elevation above the lowest point (U=0U = 0). At the lowest point (θ=0∘\theta = 0^\circ), the height must be 00, which matches L(1−cos⁡0∘)=0L(1 - \cos 0^\circ) = 0, whereas Lcos⁡0∘=LL\cos 0^\circ = L.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reference Level Verification
  • If the reference level y=0y = 0 is at the bottom of the pendulum's arc, the height at angle θ\theta is h=L−Lcos⁡θ=L(1−cos⁡θ)h = L - L\cos\theta = L(1 - \cos\theta).

  • Always test the boundary angles: plug in θ=0∘\theta = 0^\circ to check if h=0h = 0, and plug in θ=90∘\theta = 90^\circ to check if h=Lh = L.

Physical Reality Check on Range
  • A pendulum released from rest cannot swing to an angle greater than its initial release angle without added energy.

  • Check whether your result θ1\theta_1 is between 0∘0^\circ and θ0=60.0∘\theta_0 = 60.0^\circ.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the corrected potential energy expression equal to 14E\frac{1}{4}E: mgL(1−cos⁡θ1)=14[mgL(1−cos⁡60.0∘)]mgL(1 - \cos\theta_1) = \frac{1}{4}[mgL(1 - \cos 60.0^\circ)].

  2. Cancel the common factor mgLmgL: 1−cos⁡θ1=14(1−0.5)=0.1251 - \cos\theta_1 = \frac{1}{4}(1 - 0.5) = 0.125.

  3. Solve for cos⁡θ1\cos\theta_1: cos⁡θ1=1−0.125=0.875\cos\theta_1 = 1 - 0.125 = 0.875.

  4. Compute the angle: θ1=arccos⁡(0.875)≈28.96∘≈29.0∘\theta_1 = \arccos(0.875) \approx 28.96^\circ \approx 29.0^\circ.

Final answer

θ1≈29.0∘\theta_1 \approx 29.0^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a right triangle for the displaced pendulum rod showing both components: Lcos⁡θL\cos\theta along the vertical from the pivot, and h=L(1−cos⁡θ)h = L(1 - \cos\theta) as the remaining segment to the bottom.

  • Practice using the boundary check h(0∘)=0h(0^\circ) = 0 whenever setting up potential energy for circular arcs or pendulums.

OverviewACEpath Teacher's Diagnosis

03 The student reverses the energy ratio, setting U = 3K instead of K = 3U.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    E=mgL(1−cos⁡60.0∘)=0.500 mgLE = mgL(1 - \cos 60.0^\circ) = 0.500\,mgL

  2. Step 2

    U=3K, so K=U3  ⟹  E=K+U=43UU = 3K,\text{ so } K = \frac{U}{3} \implies E = K + U = \frac{4}{3}U

    Correct

    K=3U  ⟹  E=K+U=4U  ⟹  U=14EK = 3U \implies E = K + U = 4U \implies U = \frac{1}{4}E

    The problem states that the kinetic energy equals three times the potential energy (K=3UK = 3U), but you wrote U=3KU = 3K.

  3. Step 3

    0.500 mgL=(43)mgL(1−cos⁡θ1)  ⟹  1−cos⁡θ1=0.500⋅(34)=0.375  ⟹  cos⁡θ1=0.6250.500\,mgL = \left(\frac{4}{3}\right)mgL(1 - \cos \theta_1) \implies 1 - \cos \theta_1 = 0.500 \cdot \left(\frac{3}{4}\right) = 0.375 \implies \cos \theta_1 = 0.625

    Correct

    0.500 mgL=4mgL(1−cos⁡θ1)  ⟹  1−cos⁡θ1=0.5004=0.125  ⟹  cos⁡θ1=0.8750.500\,mgL = 4mgL(1 - \cos \theta_1) \implies 1 - \cos \theta_1 = \frac{0.500}{4} = 0.125 \implies \cos \theta_1 = 0.875

    Your algebraic steps were executed correctly, but they used the inverted energy fraction from Step 2.

  4. Step 4

    θ1=arccos⁡(0.625)=51.3∘\theta_1 = \arccos(0.625) = 51.3^\circ

    Correct

    θ1=arccos⁡(0.875)≈29.0∘\theta_1 = \arccos(0.875) \approx 29.0^\circ

    This numerical result follows directly from your earlier reversed energy relation.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly expressed the height of the pendulum bob above the lowest point as h=L(1−cos⁡θ)h = L(1 - \cos\theta).

You correctly applied conservation of mechanical energy to find the total energy E=0.500 mgLE = 0.500\,mgL.

You solved the trigonometric equation accurately based on your intermediate values.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed energy ratio relation

No, this is a conceptual translation error where the phrase 'kinetic energy equals three times potential energy' was transcribed as U=3KU = 3K.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You swapped the dependent and independent quantities in the ratio statement. When a problem says 'quantity A is nn times quantity B', the direct mathematical translation is A=nBA = nB, meaning the larger quantity is on the left. Since the bob has fallen most of the way from 60∘60^\circ, its kinetic energy must be much larger than its remaining potential energy, so K>UK > U.

REASONING PATH
Your ACEpath teacher’s suggested approach
Translate Verbal Ratios Directly
  • The statement 'AA is nn times BB' translates directly to A=nBA = n B.

  • Write down the two symbols, place the factor nn next to the reference quantity (BB), and perform a sanity check on which quantity must be larger.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set K1=3U1K_1 = 3U_1, so total energy is E=K1+U1=3U1+U1=4U1E = K_1 + U_1 = 3U_1 + U_1 = 4U_1.

  2. Solve for potential energy: U1=14E=14(0.500 mgL)=0.125 mgLU_1 = \frac{1}{4}E = \frac{1}{4}(0.500\,mgL) = 0.125\,mgL.

  3. Equate potential energy to height: mgL(1−cos⁡θ1)=0.125 mgLmgL(1 - \cos\theta_1) = 0.125\,mgL.

  4. Cancel mgLmgL to find cos⁡θ1=1−0.125=0.875\cos\theta_1 = 1 - 0.125 = 0.875.

  5. Calculate θ1=arccos⁡(0.875)≈29.0∘\theta_1 = \arccos(0.875) \approx 29.0^\circ.

Final answer

θ1=29.0∘\theta_1 = 29.0^\circ (or 28.96∘28.96^\circ)

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out verbal proportionality statements verbatim: 'AA equals nn times BB'   ⟹  A=nB\implies A = nB.

  • Do a quick physical sanity check: as the pendulum swings downward toward θ=0∘\theta = 0^\circ, potential energy decreases and kinetic energy increases, so K>UK > U must occur at a smaller angle than U>KU > K.

Lock it in

Similar question

01

A simple pendulum of length L=1.00 mL = 1.00\text{ m} is released from rest at θ0=60.0∘\theta_0 = 60.0^\circ. Find the angle θ\theta relative to the downward vertical where its kinetic energy equals its gravitational potential energy (K=UK = U, with U=0U = 0 at the bottom).

Answer

θ=41.4∘\theta = 41.4^\circ. Key steps: E=K+U=2UE = K + U = 2U, so U=12EU = \frac{1}{2}E. Since E=mgL(1−cos⁡60∘)=0.50mgLE = mgL(1 - \cos 60^\circ) = 0.50mgL, we have mgL(1−cos⁡θ)=0.25mgL  ⟹  cos⁡θ=0.75  ⟹  θ=arccos⁡(0.75)≈41.4∘mgL(1 - \cos\theta) = 0.25mgL \implies \cos\theta = 0.75 \implies \theta = \arccos(0.75) \approx 41.4^\circ.

02

A roller coaster car starts from rest at height HH above the ground. At what height hh above the ground does its kinetic energy equal twice its gravitational potential energy (K=2UK = 2U)? Assume negligible friction and take U=0U = 0 at ground level.

Answer

h=13Hh = \frac{1}{3}H. Key steps: Total mechanical energy is E=mgHE = mgH. At height hh, E=K+U=2U+U=3U=3mghE = K + U = 2U + U = 3U = 3mgh. Equating mgH=3mghmgH = 3mgh gives h=13Hh = \frac{1}{3}H.

03

A block attached to a horizontal ideal spring oscillates with amplitude AA. At what displacement xx from equilibrium is the elastic potential energy equal to one-third of the kinetic energy (U=13KU = \frac{1}{3}K)? Express your answer in terms of AA.

Answer

x=±12Ax = \pm \frac{1}{2}A. Key steps: If U=13KU = \frac{1}{3}K, then K=3UK = 3U. Total energy is E=K+U=4UE = K + U = 4U. Total energy of the spring is E=12kA2E = \frac{1}{2}kA^2, and potential energy is U=12kx2U = \frac{1}{2}kx^2. Therefore, 12kx2=14(12kA2)  ⟹  x2=14A2  ⟹  x=±12A\frac{1}{2}kx^2 = \frac{1}{4}\left(\frac{1}{2}kA^2\right) \implies x^2 = \frac{1}{4}A^2 \implies x = \pm \frac{1}{2}A.

Loading workspace…