Resources

In a Cavendish-type torsion balance experiment, two small lead spheres each having a mass of m=750 gm = 750\text{ g} are separated by a center-to-center distance of d=85.0 mmd = 85.0\text{ mm}. A sensitive optical lever measures the gravitational attraction between them. Using G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2, convert all values to standard SI units and calculate the magnitude of the gravitational attraction between the two spheres in nanonewtons (nN\text{nN}).

Answer and steps

Final answer

Fg=5.19 nNF_g = 5.19\text{ nN}

Steps

01

Convert Given Quantities to Standard SI Units

To use Newton's law of universal gravitation, all values must be expressed in standard SI units (kilograms for mass, meters for distance, and newtons for force):

  • Mass of each sphere (mm): m=750 g=750×10−3 kg=0.750 kgm = 750\text{ g} = 750 \times 10^{-3}\text{ kg} = 0.750\text{ kg}
  • Center-to-center separation distance (dd): d=85.0 mm=85.0×10−3 m=0.0850 md = 85.0\text{ mm} = 85.0 \times 10^{-3}\text{ m} = 0.0850\text{ m}
  • Gravitational constant (GG): G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2

02

State Newton's Law of Universal Gravitation

The gravitational force FgF_g between two spherically symmetric masses is directed along the line joining their centers and is given by:

Fg=Gm1m2d2F_g = G \frac{m_1 m_2}{d^2}

Since both spheres have identical mass (m1=m2=mm_1 = m_2 = m):

Fg=Gm2d2F_g = G \frac{m^2}{d^2}

Common Pitfall: Always measure the separation distance dd between the centers of mass of the spheres, not between their nearest surfaces, and ensure the distance is squared in the denominator.


03

Compute the Gravitational Force

Substitute the SI values into the formula:

m2=(0.750 kg)2=0.5625 kg2m^2 = (0.750\text{ kg})^2 = 0.5625\text{ kg}^2

d2=(0.0850 m)2=7.225×10−3 m2d^2 = (0.0850\text{ m})^2 = 7.225 \times 10^{-3}\text{ m}^2

Now calculate the ratio:

m2d2=0.56257.225×10−3≈77.855 kg2/m2\frac{m^2}{d^2} = \frac{0.5625}{7.225 \times 10^{-3}} \approx 77.855\text{ kg}^2/\text{m}^2

Multiply by the gravitational constant GG:

Fg=(6.674×10−11 N⋅m2/kg2)⋅(77.855 kg2/m2)≈5.19×10−9 NF_g = (6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2) \cdot (77.855\text{ kg}^2/\text{m}^2) \approx 5.19 \times 10^{-9}\text{ N}


04

Convert to Nanonewtons (nN\text{nN})

Since 1 nN=10−9 N1\text{ nN} = 10^{-9}\text{ N}:

Fg=5.19×10−9 N10−9 N/nN=5.19 nNF_g = \frac{5.19 \times 10^{-9}\text{ N}}{10^{-9}\text{ N/nN}} = 5.19\text{ nN}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to square the distance in the denominator of Newton's law of universal gravitation, yielding a force that scales with 1/d instead of 1/d².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m=750 g=0.750 kg  ⟹  d=85.0 mm=0.0850 mm = 750\text{ g} = 0.750\text{ kg} \implies d = 85.0\text{ mm} = 0.0850\text{ m}

  2. Step 2

    F=G⋅m2/d  ⟹  F=(6.674×10−11)⋅(0.750)2/0.0850F = G \cdot m^2 / d \implies F = (6.674 \times 10^{-11}) \cdot (0.750)^2 / 0.0850

    Correct

    F=Gm2d2=(6.674×10−11)⋅(0.750)2(0.0850)2F = G \frac{m^2}{d^2} = (6.674 \times 10^{-11}) \cdot \frac{(0.750)^2}{(0.0850)^2}

    Newton's law of universal gravitation follows an inverse-square law, meaning the separation distance in the denominator must be squared (d2d^2), not linear (dd).

  3. Step 3

    F=3.754×10−11/0.0850  ⟹  F=4.416×10−10 N=0.442 nNF = 3.754 \times 10^{-11} / 0.0850 \implies F = 4.416 \times 10^{-10}\text{ N} = 0.442\text{ nN}

    Correct

    F=3.754125×10−117.225×10−3≈5.195×10−9 N≈5.19 nNF = \frac{3.754125 \times 10^{-11}}{7.225 \times 10^{-3}} \approx 5.195 \times 10^{-9}\text{ N} \approx 5.19\text{ nN}

    Your arithmetic and conversion from newtons to nanonewtons were carried out correctly based on your equation, but the numerical result is off because the distance in the denominator was not squared.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted grams to kilograms and millimeters to meters.

You accurately converted your computed force from newtons to nanonewtons.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted square on distance in gravitation law

You set up the gravitational force as F=Gm1m2dF = G \frac{m_1 m_2}{d} instead of F=Gm1m2d2F = G \frac{m_1 m_2}{d^2}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated gravitational attraction as inversely proportional to distance rather than following the inverse-square law (F∝1/d2F \propto 1/d^2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify the Inverse-Square Law
  • Newton's law of universal gravitation states that Fg=Gm1m2r2F_g = G \frac{m_1 m_2}{r^2}.

  • Always write down the general formula with r2r^2 (or d2d^2) before plugging in values, and check that the denominator has unit m2\text{m}^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the denominator: d2=(0.0850 m)2=7.225×10−3 m2d^2 = (0.0850\text{ m})^2 = 7.225 \times 10^{-3}\text{ m}^2.

  2. Evaluate the numerator: G⋅m2=(6.674×10−11 N⋅m2/kg2)(0.750 kg)2≈3.7541×10−11 N⋅m2G \cdot m^2 = (6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2)(0.750\text{ kg})^2 \approx 3.7541 \times 10^{-11}\text{ N}\cdot\text{m}^2.

  3. Divide to find the force: F=3.7541×10−11 N⋅m27.225×10−3 m2≈5.195×10−9 NF = \frac{3.7541 \times 10^{-11}\text{ N}\cdot\text{m}^2}{7.225 \times 10^{-3}\text{ m}^2} \approx 5.195 \times 10^{-9}\text{ N}.

  4. Convert to nanonewtons: F=5.195×10−9 N=5.19 nNF = 5.195 \times 10^{-9}\text{ N} = 5.19\text{ nN}.

Final answer

Fg=5.19 nNF_g = 5.19\text{ nN}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check your formula against the standard reference to ensure the distance variable is squared.

  • Check units of the gravitational constant (GG has units of N⋅m2/kg2\text{N}\cdot\text{m}^2/\text{kg}^2), which reminds you that dd must be squared to cancel m2\text{m}^2.

OverviewACEpath Teacher's Diagnosis

02 The student misconverts millimeters to meters by dividing by 100 instead of 1000, using d = 0.850 m.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m=0.750 kgm = 0.750\text{ kg}, d=85.0 mm=0.850 md = 85.0\text{ mm} = 0.850\text{ m}

    Correct

    m=750 g=0.750 kgm = 750\text{ g} = 0.750\text{ kg}, d=85.0 mm=85.0×10−3 m=0.0850 md = 85.0\text{ mm} = 85.0 \times 10^{-3}\text{ m} = 0.0850\text{ m}

    You correctly converted grams to kilograms, but you converted millimeters to meters by dividing by 100100 rather than 10001000. Since 1 m=1000 mm1\text{ m} = 1000\text{ mm}, 85.0 mm85.0\text{ mm} equals 0.0850 m0.0850\text{ m}.

  2. Step 2

    F=G⋅m2d2  ⟹  F=(6.674×10−11)⋅(0.750)2(0.850)2F = G \cdot \frac{m^2}{d^2} \implies F = (6.674 \times 10^{-11}) \cdot \frac{(0.750)^2}{(0.850)^2}

    Correct

    F=Gm2d2=(6.674×10−11)⋅(0.750)2(0.0850)2F = G \frac{m^2}{d^2} = (6.674 \times 10^{-11}) \cdot \frac{(0.750)^2}{(0.0850)^2}

    You chose the exact correct formula for gravitational attraction between identical spheres, but the substitution carried forward the incorrect separation distance of 0.850 m0.850\text{ m}.

  3. Step 3

    F=3.754×10−110.7225=5.196×10−11 N=0.0520 nNF = \frac{3.754 \times 10^{-11}}{0.7225} = 5.196 \times 10^{-11}\text{ N} = 0.0520\text{ nN}

    Correct

    F=5.19×10−9 N=5.19 nNF = 5.19 \times 10^{-9}\text{ N} = 5.19\text{ nN}

    Your arithmetic and final conversion from newtons to nanonewtons were executed consistently with your substituted values, but the final answer is off by a factor of 100100 because d2d^2 was 100100 times too large.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied Newton's law of universal gravitation, F=Gm1m2d2F = G \frac{m_1 m_2}{d^2}.

You accurately converted the mass of the spheres from 750 g750\text{ g} to 0.750 kg0.750\text{ kg}.

You correctly converted your calculated force from newtons to nanonewtons using 1 nN=10−9 N1\text{ nN} = 10^{-9}\text{ N}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric prefix conversion error (milli- vs centi-)

You divided by 100100 instead of 10001000 when converting from millimeters to meters.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the SI metric prefixes 'milli-' (10−310^{-3}) and 'centi-' (10−210^{-2}) when converting spatial lengths to base SI units.

REASONING PATH
Your ACEpath teacher’s suggested approach
Metric Prefix Recall
  • The prefix 'milli-' signifies 10−310^{-3} (1 mm=10−3 m=11000 m1\text{ mm} = 10^{-3}\text{ m} = \frac{1}{1000}\text{ m}), whereas 'centi-' signifies 10−210^{-2} (1 cm=10−2 m=1100 m1\text{ cm} = 10^{-2}\text{ m} = \frac{1}{100}\text{ m}).

  • Always write out the power of ten explicitly (e.g., 85.0 mm=85.0×10−3 m85.0\text{ mm} = 85.0 \times 10^{-3}\text{ m}) before shifting decimal points.

Inverse-Square Sensitivity Check
  • Because distance appears squared in the denominator (F∝1d2F \propto \frac{1}{d^2}), an error of factor 1010 in distance causes an error of factor 102=10010^2 = 100 in force.

  • Double-check length conversions carefully whenever inverse-square laws are involved.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the separation distance correctly: d=85.0 mm=85.0×10−3 m=0.0850 md = 85.0\text{ mm} = 85.0 \times 10^{-3}\text{ m} = 0.0850\text{ m}.

  2. Square the separation distance: d2=(0.0850 m)2=7.225×10−3 m2d^2 = (0.0850\text{ m})^2 = 7.225 \times 10^{-3}\text{ m}^2.

  3. Compute the numerator: Gm2=(6.674×10−11)(0.750)2=3.754125×10−11 N⋅m2G m^2 = (6.674 \times 10^{-11})(0.750)^2 = 3.754125 \times 10^{-11}\text{ N}\cdot\text{m}^2.

  4. Divide by d2d^2: Fg=3.754125×10−117.225×10−3≈5.196×10−9 NF_g = \frac{3.754125 \times 10^{-11}}{7.225 \times 10^{-3}} \approx 5.196 \times 10^{-9}\text{ N}.

  5. Convert to nanonewtons: Fg=5.196×10−9 N10−9 N/nN≈5.19 nNF_g = \frac{5.196 \times 10^{-9}\text{ N}}{10^{-9}\text{ N/nN}} \approx 5.19\text{ nN}.

Final answer

Fg=5.19 nNF_g = 5.19\text{ nN}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review standard SI metric prefixes: milli- (10−310^{-3}), micro- (10−610^{-6}), and centi- (10−210^{-2}).

  • Practice converting values given in millimeters directly into scientific notation (x mm=x×10−3 mx\text{ mm} = x \times 10^{-3}\text{ m}) before evaluating expressions.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to square the mass in the numerator when calculating the attraction between two identical masses.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m=750 g=0.750 kgm = 750\text{ g} = 0.750\text{ kg} ⟹ d=85.0 mm=0.0850 md = 85.0\text{ mm} = 0.0850\text{ m}

  2. Step 2

    F=G⋅md2  ⟹  F=(6.674×10−11)⋅0.750/(0.0850)2F = G \cdot \frac{m}{d^2} \implies F = (6.674 \times 10^{-11}) \cdot 0.750 / (0.0850)^2

    Correct

    F=Gm1m2d2=Gm2d2=(6.674×10−11)⋅(0.750)2(0.0850)2F = G \frac{m_1 m_2}{d^2} = G \frac{m^2}{d^2} = (6.674 \times 10^{-11}) \cdot \frac{(0.750)^2}{(0.0850)^2}

    Newton's law of universal gravitation requires the product of both interacting masses, m1m2m_1 m_2. Because both spheres have mass mm, the numerator should be m2m^2 rather than mm.

  3. Step 3

    F=5.006×10−11/0.007225  ⟹  F=6.928×10−9 N=6.93 nNF = 5.006 \times 10^{-11} / 0.007225 \implies F = 6.928 \times 10^{-9}\text{ N} = 6.93\text{ nN}

    Correct

    F=5.19×10−9 N=5.19 nNF = 5.19 \times 10^{-9}\text{ N} = 5.19\text{ nN}

    Your arithmetic and unit prefix conversion to nanonewtons were executed accurately, but the numerical value was affected by the missing mass factor in the numerator.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the given mass and separation distance into standard SI units.

You accurately calculated the numerical quotient using your chosen formula.

You correctly converted the final force from newtons to nanonewtons.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted second mass in universal gravitation formula

No, this is a conceptual confusion between gravitational force between two objects (F=Gm1m2r2F = G\frac{m_1 m_2}{r^2}) and gravitational field strength created by a single object (g=Gmr2g = G\frac{m}{r^2}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Newton's law of universal gravitation describes a mutual interaction between two bodies and depends on the product of both masses (m1m2m_1 m_2). Writing F=Gmd2F = G\frac{m}{d^2} omits the second mass, resulting in units of acceleration (or force per unit mass) rather than force.

REASONING PATH
Your ACEpath teacher’s suggested approach
Gravitational Force vs. Field
  • Fg=Gm1m2r2F_g = G\frac{m_1 m_2}{r^2} (force, in N\text{N}) vs. g=GMr2g = G\frac{M}{r^2} (field/acceleration, in N/kg\text{N/kg} or m/s2\text{m/s}^2).

  • Always verify that the numerator of the force equation includes two mass terms (m1×m2m_1 \times m_2, or m2m^2 when the masses are identical).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the gravitational force formula for two identical masses: Fg=Gm2d2F_g = G \frac{m^2}{d^2}

  2. Substitute the values in SI units: Fg=(6.674×10−11)×(0.750)2(0.0850)2=(6.674×10−11)×0.56250.007225F_g = (6.674 \times 10^{-11}) \times \frac{(0.750)^2}{(0.0850)^2} = (6.674 \times 10^{-11}) \times \frac{0.5625}{0.007225}

  3. Evaluate the calculation: Fg≈5.19×10−9 NF_g \approx 5.19 \times 10^{-9}\text{ N}

  4. Express the final result in nanonewtons: Fg=5.19 nNF_g = 5.19\text{ nN}

Final answer

Fg=5.19 nNF_g = 5.19\text{ nN}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the dimensional distinction between gravitational force (FgF_g, measured in newtons) and gravitational field strength (gg, measured in newtons per kilogram).

  • Practice setting up Newton's law of gravitation by explicitly writing m1m_1 and m2m_2 before combining them into m2m^2 for identical bodies.

Lock it in

Similar question

01

Two identical bowling balls each of mass m=6.0 kgm = 6.0\text{ kg} are placed with their centers 0.50 m0.50\text{ m} apart. Calculate the gravitational force between them in nanonewtons (nN\text{nN}), using G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2.

Answer

Fg=9.61 nNF_g = 9.61\text{ nN}. Key steps: F=Gm2r2=(6.674×10−11)⋅6.020.502=(6.674×10−11)⋅360.25=9.61×10−9 N=9.61 nNF = G \frac{m^2}{r^2} = (6.674 \times 10^{-11}) \cdot \frac{6.0^2}{0.50^2} = (6.674 \times 10^{-11}) \cdot \frac{36}{0.25} = 9.61 \times 10^{-9}\text{ N} = 9.61\text{ nN}.

02

Two lead spheres separated by a center-to-center distance of 0.12 m0.12\text{ m} exert a gravitational force of 2.50 nN2.50\text{ nN} on each other. If their separation distance is reduced to 0.040 m0.040\text{ m} (one-third of the original distance), what is the new gravitational force in nanonewtons?

Answer

Fg′=22.5 nNF_g' = 22.5\text{ nN}. Key steps: Since F∝1r2F \propto \frac{1}{r^2}, dividing the distance by 33 increases the force by a factor of 32=93^2 = 9. Thus, Fg′=9×2.50 nN=22.5 nNF_g' = 9 \times 2.50\text{ nN} = 22.5\text{ nN}.

03

A 2.0 kg2.0\text{ kg} mass and an unknown mass MM experience a mutual gravitational attraction of 1.50×10−10 N1.50 \times 10^{-10}\text{ N} when separated by 20.0 cm20.0\text{ cm}. Find the mass MM in kilograms, using G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2.

Answer

M=0.0450 kgM = 0.0450\text{ kg} (45.0 g45.0\text{ g}). Key steps: Convert distance r=0.200 mr = 0.200\text{ m}. Rearrange F=GmMr2  ⟹  M=Fr2Gm=(1.50×10−10)(0.200)2(6.674×10−11)(2.0)=6.00×10−121.3348×10−10≈0.0450 kgF = G \frac{m M}{r^2} \implies M = \frac{F r^2}{G m} = \frac{(1.50 \times 10^{-10})(0.200)^2}{(6.674 \times 10^{-11})(2.0)} = \frac{6.00 \times 10^{-12}}{1.3348 \times 10^{-10}} \approx 0.0450\text{ kg}.

Loading workspace…