Resources

Consider a gas described by the van der Waals equation of state: (P+anmol2V2)(V−nmolb)=nmolRT\left(P + \frac{a n_{\text{mol}}^2}{V^2}\right)(V - n_{\text{mol}}b) = n_{\text{mol}} R T, where bb accounts for the finite volume of particles (co-volume) and aa accounts for long-range attractive forces. Let n=NAnmolVn = \frac{N_A n_{\text{mol}}}{V} denote the particle number density. (a) In the extreme asymptotic limit of high dilution where the molar volume Vˉ=Vnmol→∞\bar{V} = \frac{V}{n_{\text{mol}}} \to \infty (or number density n→0n \to 0), show what the equation of state reduces to, and specify the physical justification based on particle separation rr. (b) In the opposite extreme asymptotic limit of high compression for a liquid/solid condensed phase where P→∞P \to \infty at finite temperature, determine the minimum limiting volume VminV_{\text{min}} for 1.00 mol1.00\text{ mol} of a substance having hard-sphere molecular radius rparticle=1.60×10−10 mr_{\text{particle}} = 1.60 \times 10^{-10}\text{ m}, given that b=4NAvparticle=4NA(43πrparticle3)b = 4 N_A v_{\text{particle}} = 4 N_A \left(\frac{4}{3}\pi r_{\text{particle}}^3\right).

Answer and steps

Final answer

(a) P=nkBTP = n k_B T (the Ideal Gas Law), because as average inter-particle separation r→∞r \to \infty, both the finite particle volume fraction bVˉ→0\frac{b}{\bar{V}} \to 0 and the attractive potential energy density aVˉ2→0\frac{a}{\bar{V}^2} \to 0. (b) Vmin=b=4.14×10−5 m3=41.4 cm3V_{\text{min}} = b = 4.14 \times 10^{-5}\text{ m}^3 = 41.4\text{ cm}^3.

Steps

Part (a): The High-Dilution (Low-Density) Limit

  1. Express the Equation of State in Terms of Molar Volume: Dividing the volume terms in the van der Waals equation by the number of moles nmoln_{\text{mol}} gives: (P+aVˉ2)(Vˉ−b)=RT\left(P + \frac{a}{\bar{V}^2}\right)(\bar{V} - b) = R T where Vˉ=Vnmol\bar{V} = \frac{V}{n_{\text{mol}}} is the molar volume.
  2. Take the Limit as Vˉ→∞\bar{V} \to \infty (or n→0n \to 0):

    • As Vˉ→∞\bar{V} \to \infty, the correction term for attractive forces vanishes: aVˉ2→0\frac{a}{\bar{V}^2} \to 0
    • Similarly, the co-volume fraction becomes negligible compared to the total volume: Vˉ−b≈Vˉ(since bVˉ→0)\bar{V} - b \approx \bar{V} \quad \left(\text{since } \frac{b}{\bar{V}} \to 0\right)

    Substituting these limits into the equation of state: PVˉ=RT  ⟹  P(Vnmol)=RTP \bar{V} = R T \implies P \left(\frac{V}{n_{\text{mol}}}\right) = R T

    Using the total particle count N=NAnmolN = N_A n_{\text{mol}}, the universal gas constant relation R=NAkBR = N_A k_B, and the particle number density n=NVn = \frac{N}{V}: P=nmolRTV=NkBTV=nkBTP = \frac{n_{\text{mol}} R T}{V} = \frac{N k_B T}{V} = n k_B T This is the Ideal Gas Law.

  3. Physical Justification: The average distance between molecules scales as r∼n−1/3∝Vˉ1/3r \sim n^{-1/3} \propto \bar{V}^{1/3}. In the dilute limit (Vˉ→∞\bar{V} \to \infty), the mean separation r→∞r \to \infty. Consequently:

    • The volume occupied by the particles becomes an infinitesimally small fraction of the available space, making hard-core excluded-volume effects negligible.
    • Intermolecular attractive forces decay rapidly with distance, so the potential energy between distant particles approaches zero, leaving only kinetic collisions with the container walls.

Part (b): The High-Compression Limit

  1. Isolate Volume Under Extreme Compression: Rearrange the van der Waals equation for volume VV: V−nmolb=nmolRTP+anmol2V2V - n_{\text{mol}} b = \frac{n_{\text{mol}} R T}{P + \frac{a n_{\text{mol}}^2}{V^2}}

    As the pressure becomes extremely large (P→∞P \to \infty) at a constant, finite temperature TT: lim⁡P→∞(V−nmolb)=0  ⟹  Vmin=nmolb\lim_{P \to \infty} \left(V - n_{\text{mol}} b\right) = 0 \implies V_{\text{min}} = n_{\text{mol}} b

  2. Calculate bb for 1.00 mol1.00\text{ mol} of the Substance: For nmol=1.00 moln_{\text{mol}} = 1.00\text{ mol}, the minimum volume equals the molar excluded volume bb: Vmin=b=4NA(43πrparticle3)V_{\text{min}} = b = 4 N_A \left(\frac{4}{3}\pi r_{\text{particle}}^3\right)

    Substitute the given numerical constants:

    • NA≈6.022×1023 mol−1N_A \approx 6.022 \times 10^{23}\text{ mol}^{-1}
    • rparticle=1.60×10−10 mr_{\text{particle}} = 1.60 \times 10^{-10}\text{ m}

    First, calculate the volume of a single particle, vparticlev_{\text{particle}}: vparticle=43π(1.60×10−10 m)3≈43π(4.096×10−30 m3)≈1.716×10−29 m3v_{\text{particle}} = \frac{4}{3}\pi \left(1.60 \times 10^{-10}\text{ m}\right)^3 \approx \frac{4}{3}\pi \left(4.096 \times 10^{-30}\text{ m}^3\right) \approx 1.716 \times 10^{-29}\text{ m}^3

    Now, compute VminV_{\text{min}}: Vmin=4(6.022×1023 mol−1)(1.716×10−29 m3)V_{\text{min}} = 4 \left(6.022 \times 10^{23}\text{ mol}^{-1}\right) \left(1.716 \times 10^{-29}\text{ m}^3\right) Vmin≈4.14×10−5 m3V_{\text{min}} \approx 4.14 \times 10^{-5}\text{ m}^3

    Converting to cubic centimeters (1 m3=106 cm31\text{ m}^3 = 10^6\text{ cm}^3): Vmin=4.14×10−5×106 cm3=41.4 cm3V_{\text{min}} = 4.14 \times 10^{-5} \times 10^6\text{ cm}^3 = 41.4\text{ cm}^3

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets the factor of 4 in the definition of the co-volume b and calculates the limiting volume as the bare volume of the spherical particles.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    (P+aVˉ2)(Vˉ−b)=RT  ⟹  As Vˉ→∞, r→∞ so aVˉ2→0 and b≪Vˉ  ⟹  PV=nmolRT (ideal gas law)\left(P + \frac{a}{\bar{V}^2}\right)(\bar{V} - b) = R T \implies \text{As } \bar{V} \to \infty,\ r \to \infty \text{ so } \frac{a}{\bar{V}^2} \to 0 \text{ and } b \ll \bar{V} \implies P V = n_{\text{mol}} R T \text{ (ideal gas law)}

  2. Step 2

    As P→∞, V−nmolb=0, so Vmin=nmolb\text{As } P \to \infty,\ V - n_{\text{mol}} b = 0,\ \text{so } V_{\text{min}} = n_{\text{mol}} b

  3. Step 3

    vparticle=43π(1.60×10−10)3=1.716×10−29 m3v_{\text{particle}} = \frac{4}{3} \pi (1.60 \times 10^{-10})^3 = 1.716 \times 10^{-29}\text{ m}^3

  4. Step 4

    b=NA⋅vparticle=1.033×10−5 m3/molb = N_A \cdot v_{\text{particle}} = 1.033 \times 10^{-5}\text{ m}^3/\text{mol}

    Correct

    b=4NAvparticle=4(6.022×1023 mol−1)(1.716×10−29 m3)≈4.14×10−5 m3/molb = 4 N_A v_{\text{particle}} = 4 (6.022 \times 10^{23}\text{ mol}^{-1})(1.716 \times 10^{-29}\text{ m}^3) \approx 4.14 \times 10^{-5}\text{ m}^3/\text{mol}

    You defined bb as NAvparticleN_A v_{\text{particle}} instead of using b=4NAvparticleb = 4 N_A v_{\text{particle}} as given in the problem statement. For hard spheres, the pairwise excluded volume per molecule is 44 times the molecule's physical volume.

  5. Step 5

    Vmin=1.00⋅1.033×10−5 m3=1.03×10−5 m3V_{\text{min}} = 1.00 \cdot 1.033 \times 10^{-5}\text{ m}^3 = 1.03 \times 10^{-5}\text{ m}^3

    Correct

    Vmin=nmolb=(1.00 mol)(4.14×10−5 m3/mol)=4.14×10−5 m3V_{\text{min}} = n_{\text{mol}} b = (1.00\text{ mol})(4.14 \times 10^{-5}\text{ m}^3/\text{mol}) = 4.14 \times 10^{-5}\text{ m}^3

    You evaluated Vmin=nmolbV_{\text{min}} = n_{\text{mol}} b consistently with your previous step, but the final value inherits the missing factor of 44.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly derived the ideal gas equation of state in the asymptotic limit of large volume.

You provided the correct physical justification that inter-particle distance r→∞r \to \infty eliminates interaction corrections.

You accurately identified Vmin=nmolbV_{\text{min}} = n_{\text{mol}} b as the high-pressure limiting volume.

You calculated the single-particle volume vparticlev_{\text{particle}} correctly from the given radius.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Excluded Volume Factor

You equated the co-volume constant bb to the bare molecular volume NAvparticleN_A v_{\text{particle}}, omitting the factor of 44.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking that the van der Waals parameter bb accounts for pairwise collision exclusion (an exclusion sphere of radius 2r2r shared between two particles: 12⋅43π(2r)3=4vparticle\frac{1}{2} \cdot \frac{4}{3}\pi (2r)^3 = 4 v_{\text{particle}}) rather than simply packing the physical space occupied by the molecules themselves.

REASONING PATH
Your ACEpath teacher’s suggested approach
Excluded Volume Definition
  • For spherical particles of radius rr, the excluded volume parameter per mole is b=4NAvparticle=4NA(43πr3)b = 4 N_A v_{\text{particle}} = 4 N_A \left(\frac{4}{3}\pi r^3\right).

  • Check whether the problem defines bb with the theoretical factor of 44 representing center-of-mass exclusion before multiplying by NAN_A.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the full formula b=4NAvparticleb = 4 N_A v_{\text{particle}}.

  2. Substitute NA=6.022×1023 mol−1N_A = 6.022 \times 10^{23}\text{ mol}^{-1} and vparticle=1.716×10−29 m3v_{\text{particle}} = 1.716 \times 10^{-29}\text{ m}^3: b=4×(6.022×1023)×(1.716×10−29 m3)=4.135×10−5 m3/molb = 4 \times (6.022 \times 10^{23}) \times (1.716 \times 10^{-29}\text{ m}^3) = 4.135 \times 10^{-5}\text{ m}^3/\text{mol}.

  3. Calculate Vmin=nmolb=(1.00 mol)(4.135×10−5 m3/mol)=4.14×10−5 m3V_{\text{min}} = n_{\text{mol}} b = (1.00\text{ mol})(4.135 \times 10^{-5}\text{ m}^3/\text{mol}) = 4.14 \times 10^{-5}\text{ m}^3 (or 41.4 cm341.4\text{ cm}^3).

Final answer

Vmin=4.14×10−5 m3V_{\text{min}} = 4.14 \times 10^{-5}\text{ m}^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the geometric derivation of the excluded volume between two hard spheres of radius rr.

  • Double-check given definitions in multi-part physics problems to ensure all numerical coefficients are transferred into your calculation.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets the limit P -> ∞ as driving the volume to zero, ignoring the co-volume exclusion term.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    (P+aVˉ2)(Vˉ−b)=RT  ⟹  \left(P + \frac{a}{\bar{V}^2}\right)(\bar{V}-b) = RT \implies As Vˉ→∞\bar{V} \to \infty, average separation r→∞r \to \infty so attractive forces vanish and molecular volume is negligible   ⟹  PV=nmolRT\implies PV = n_{\text{mol}} RT

  2. Step 2

    As pressure P→∞P \to \infty, the gas is compressed infinitely   ⟹  Vmin=0 m3\implies V_{\text{min}} = 0\text{ m}^3

    Correct

    V−nmolb=nmolRTP+anmol2V2→P→∞0  ⟹  Vmin=nmolb=4.14×10−5 m3=41.4 cm3V - n_{\text{mol}}b = \frac{n_{\text{mol}}RT}{P + \frac{a n_{\text{mol}}^2}{V^2}} \xrightarrow{P \to \infty} 0 \implies V_{\text{min}} = n_{\text{mol}}b = 4.14 \times 10^{-5}\text{ m}^3 = 41.4\text{ cm}^3

    You treated the molecules as point particles with zero size. In the van der Waals model, particles possess a finite hard-sphere volume that resists infinite compression, yielding a minimum physical volume Vmin=nmolbV_{\text{min}} = n_{\text{mol}}b rather than zero.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly wrote the molar-volume form of the van der Waals equation of state.

You accurately explained that as average intermolecular separation r→∞r \to \infty, attractive forces and co-volume become negligible.

You correctly recovered the Ideal Gas Law in the high-dilution limit.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Excluded Co-Volume at High Pressure

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You applied the point-particle assumption of an ideal gas (V∝1/P→0V \propto 1/P \to 0) to the extreme compression limit rather than analyzing the geometric constraint imposed by the hard-sphere parameter (V−nmolb)(V - n_{\text{mol}}b) in the van der Waals equation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Hard-Sphere Excluded Volume Constraint
  • Real molecules occupy finite spatial volume; as P→∞P \to \infty, (V−nmolb)→0(V - n_{\text{mol}}b) \to 0, which sets the lower geometric bound at Vmin=nmolbV_{\text{min}} = n_{\text{mol}}b.

  • Isolate the volume difference term (V−nmolb)(V - n_{\text{mol}}b) before taking the limit as pressure grows infinitely large.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Rearrange the van der Waals equation to isolate (V−nmolb)(V - n_{\text{mol}}b): V−nmolb=nmolRTP+anmol2V2V - n_{\text{mol}}b = \frac{n_{\text{mol}}RT}{P + \frac{a n_{\text{mol}}^2}{V^2}}.

  2. Take the limit as P→∞P \to \infty at finite TT: the right-hand side approaches 00, so Vmin=nmolbV_{\text{min}} = n_{\text{mol}}b.

  3. For nmol=1.00 moln_{\text{mol}} = 1.00\text{ mol}, calculate b=4NA(43πrparticle3)=4(6.022×1023 mol−1)(43π(1.60×10−10 m)3)≈4.14×10−5 m3b = 4 N_A \left(\frac{4}{3}\pi r_{\text{particle}}^3\right) = 4(6.022 \times 10^{23}\text{ mol}^{-1})\left(\frac{4}{3}\pi (1.60 \times 10^{-10}\text{ m})^3\right) \approx 4.14 \times 10^{-5}\text{ m}^3.

Final answer

Vmin=4.14×10−5 m3=41.4 cm3V_{\text{min}} = 4.14 \times 10^{-5}\text{ m}^3 = 41.4\text{ cm}^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Always check whether your asymptotic limit respects the physical boundaries defined by the equation of state (e.g., V>nmolbV > n_{\text{mol}}b).

  • Practice computing numerical values for excluded volume bb from given microscopic molecular radii.

Lock it in

Similar question

01

A noble gas consists of spherical atoms of radius r=1.20×10−10 mr = 1.20 \times 10^{-10}\text{ m}. Calculate its van der Waals parameter bb in cm3/mol\text{cm}^3/\text{mol}.

Answer

b=4NA(43πr3)=4(6.022×1023)(43π(1.20×10−8 cm)3)≈17.5 cm3/molb = 4 N_A \left(\frac{4}{3}\pi r^3\right) = 4 (6.022 \times 10^{23}) \left(\frac{4}{3}\pi (1.20 \times 10^{-8}\text{ cm})^3\right) \approx 17.5\text{ cm}^3/\text{mol}.

02

For argon gas, the experimental co-volume is b=3.22×10−5 m3/molb = 3.22 \times 10^{-5}\text{ m}^3/\text{mol}. Assuming hard-sphere behavior where b=4NA(43πr3)b = 4 N_A \left(\frac{4}{3}\pi r^3\right), estimate the effective atomic radius rr of an argon atom.

Answer

First find single-atom excluded volume: 4vatom=bNA=3.22×10−56.022×1023=5.347×10−29 m34 v_{\text{atom}} = \frac{b}{N_A} = \frac{3.22 \times 10^{-5}}{6.022 \times 10^{23}} = 5.347 \times 10^{-29}\text{ m}^3. Then vatom=1.337×10−29 m3=43πr3v_{\text{atom}} = 1.337 \times 10^{-29}\text{ m}^3 = \frac{4}{3}\pi r^3, which gives r=(3×1.337×10−294π)1/3≈1.47×10−10 mr = \left(\frac{3 \times 1.337 \times 10^{-29}}{4\pi}\right)^{1/3} \approx 1.47 \times 10^{-10}\text{ m} (1.47 A˚1.47\text{ \AA}).

03

A real gas follows the Dieterici equation of state P(V−nmolb)=nmolRTexp⁡(−anmolRTV)P(V - n_{\text{mol}}b) = n_{\text{mol}} R T \exp\left(-\frac{a n_{\text{mol}}}{R T V}\right). Find the limiting volume VminV_{\text{min}} as P→∞P \to \infty at finite TT, and determine VminV_{\text{min}} for 2.50 mol2.50\text{ mol} of a gas with molecular radius r=1.50×10−10 mr = 1.50 \times 10^{-10}\text{ m} (where b=4NA⋅43πr3b = 4 N_A \cdot \frac{4}{3}\pi r^3).

Answer

As P→∞P \to \infty with finite TT, V−nmolb=nmolRTPexp⁡(...)→0V - n_{\text{mol}}b = \frac{n_{\text{mol}}RT}{P}\exp(...) \to 0, so Vmin=nmolbV_{\text{min}} = n_{\text{mol}}b. For r=1.50×10−10 mr = 1.50 \times 10^{-10}\text{ m}, vparticle=43π(1.50×10−10)3=1.414×10−29 m3v_{\text{particle}} = \frac{4}{3}\pi (1.50 \times 10^{-10})^3 = 1.414 \times 10^{-29}\text{ m}^3. Thus b=4(6.022×1023)(1.414×10−29)=3.406×10−5 m3/molb = 4 (6.022 \times 10^{23})(1.414 \times 10^{-29}) = 3.406 \times 10^{-5}\text{ m}^3/\text{mol}. For 2.50 mol2.50\text{ mol}, Vmin=2.50×3.406×10−5=8.52×10−5 m3V_{\text{min}} = 2.50 \times 3.406 \times 10^{-5} = 8.52 \times 10^{-5}\text{ m}^3 (85.2 cm385.2\text{ cm}^3).

Loading workspace…