Resources

A 0.250 kg0.250\text{ kg} glider on a frictionless air track is connected to a horizontal spring and executes simple harmonic motion. At a position of x=0.0800 mx = 0.0800\text{ m} from equilibrium, the glider is observed to have a speed of 1.20 m/s1.20\text{ m/s}. If the total mechanical energy of the oscillating glider-spring system is 0.450 J0.450\text{ J}, determine (a) the spring constant kk of the spring, and (b) the oscillation amplitude AA.

Answer and steps

Final answer

(a) Spring constant k=84.4 N/mk = 84.4\text{ N/m}; (b) Amplitude A=0.103 mA = 0.103\text{ m}.

Steps

Part (a): Determine the Spring Constant kk

In simple harmonic motion on a frictionless surface, mechanical energy is conserved. The total mechanical energy EE is the sum of the glider's kinetic energy KK and the spring's elastic potential energy UU:

E=K+U=12mv2+12kx2E = K + U = \frac{1}{2}mv^2 + \frac{1}{2}kx^2

  1. Calculate the kinetic energy at x=0.0800 mx = 0.0800\text{ m}: K=12mv2=12(0.250 kg)(1.20 m/s)2K = \frac{1}{2}mv^2 = \frac{1}{2}(0.250\text{ kg})(1.20\text{ m/s})^2 K=12(0.250)(1.44)=0.180 JK = \frac{1}{2}(0.250)(1.44) = 0.180\text{ J}
  2. Find the elastic potential energy UU at this position: U=E−K=0.450 J−0.180 J=0.270 JU = E - K = 0.450\text{ J} - 0.180\text{ J} = 0.270\text{ J}
  3. Solve for the spring constant kk: U=12kx2  ⟹  k=2Ux2U = \frac{1}{2}kx^2 \implies k = \frac{2U}{x^2} k=2(0.270 J)(0.0800 m)2=0.5400.0064 N/m≈84.4 N/mk = \frac{2(0.270\text{ J})}{(0.0800\text{ m})^2} = \frac{0.540}{0.0064}\text{ N/m} \approx 84.4\text{ N/m}

Part (b): Determine the Oscillation Amplitude AA

At the turning points (where x=±Ax = \pm A), the glider momentarily comes to rest, meaning its velocity is v=0v = 0 and all the mechanical energy is in the form of elastic potential energy:

E=12kA2E = \frac{1}{2}kA^2

  1. Rearrange to solve for amplitude AA: A=2EkA = \sqrt{\frac{2E}{k}}
  2. Substitute the given total energy and the calculated spring constant: A=2(0.450 J)84.375 N/m=0.90084.375≈0.01067 m2≈0.103 mA = \sqrt{\frac{2(0.450\text{ J})}{84.375\text{ N/m}}} = \sqrt{\frac{0.900}{84.375}} \approx \sqrt{0.01067\text{ m}^2} \approx 0.103\text{ m}

(Pitfall to avoid: Be sure to use the unrounded value of k=84.375 N/mk = 84.375\text{ N/m} in intermediate calculations to prevent rounding errors in the final value of AA.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to square the velocity when calculating the kinetic energy, leading to an incorrect potential energy and spring constant.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    K=12mv=12(0.250)(1.20)=0.150 JK = \frac{1}{2}mv = \frac{1}{2}(0.250)(1.20) = 0.150\text{ J}

    Correct

    K=12mv2=12(0.250 kg)(1.20 m/s)2=0.180 JK = \frac{1}{2}mv^2 = \frac{1}{2}(0.250\text{ kg})(1.20\text{ m/s})^2 = 0.180\text{ J}

    You forgot to square the velocity in the kinetic energy formula. Kinetic energy is defined as K=12mv2K = \frac{1}{2}mv^2, which gives 0.180 J0.180\text{ J} rather than 0.150 J0.150\text{ J}.

  2. Step 2

    U=E−K=0.450−0.150=0.300 J  ⟹  U=12kx2  ⟹  k=2Ux2=2(0.300)(0.0800)2=93.75 N/mU = E - K = 0.450 - 0.150 = 0.300\text{ J} \implies U = \frac{1}{2}kx^2 \implies k = \frac{2U}{x^2} = \frac{2(0.300)}{(0.0800)^2} = 93.75\text{ N/m}

    Correct

    U=E−K=0.450 J−0.180 J=0.270 J  ⟹  k=2(0.270 J)(0.0800 m)2≈84.4 N/mU = E - K = 0.450\text{ J} - 0.180\text{ J} = 0.270\text{ J} \implies k = \frac{2(0.270\text{ J})}{(0.0800\text{ m})^2} \approx 84.4\text{ N/m}

    Your algebraic rearrangement and subtraction method were completely sound, but your result was affected by using the incorrect value of KK from Step 1.

  3. Step 3

    E=12kA2  ⟹  A=2Ek=2(0.450)93.75=0.00960=0.0980 mE = \frac{1}{2}kA^2 \implies A = \sqrt{\frac{2E}{k}} = \sqrt{\frac{2(0.450)}{93.75}} = \sqrt{0.00960} = 0.0980\text{ m}

    Correct

    E=12kA2  ⟹  A=2Ek=2(0.450 J)84.375 N/m≈0.103 mE = \frac{1}{2}kA^2 \implies A = \sqrt{\frac{2E}{k}} = \sqrt{\frac{2(0.450\text{ J})}{84.375\text{ N/m}}} \approx 0.103\text{ m}

    You correctly related the total energy to the oscillation amplitude, but substituting your earlier spring constant k=93.75 N/mk = 93.75\text{ N/m} led to an incorrect final amplitude.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the conservation of mechanical energy principle: E=K+UE = K + U.

You accurately solved for the spring constant using U=12kx2U = \frac{1}{2}kx^2.

You correctly recognized that total energy equals maximum potential energy at the turning points: E=12kA2E = \frac{1}{2}kA^2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing Velocity Exponent in Kinetic Energy

You wrote K=12mvK = \frac{1}{2}mv instead of K=12mv2K = \frac{1}{2}mv^2, omitting the square on the speed term.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Formula recall lapse confusing linear momentum (p=mvp = mv) or a linear expression with quadratic kinetic energy (K=12mv2K = \frac{1}{2}mv^2), failing to perform a quick dimensional check (kg⋅m2/s2=J\text{kg}\cdot\text{m}^2/\text{s}^2 = \text{J}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Kinetic Energy Dimensions
  • [K]=kg⋅(m/s)2=J[K] = \text{kg}\cdot(\text{m/s})^2 = \text{J}

  • Always verify that speed is squared in kinetic energy so the units resolve to joules.

Confirm Conservation of Energy Step
  • E=12mv2+12kx2E = \frac{1}{2}mv^2 + \frac{1}{2}kx^2

  • Write out the full quadratic energy equation before substituting numerical values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate kinetic energy with v2v^2: K=12(0.250 kg)(1.20 m/s)2=0.180 JK = \frac{1}{2}(0.250\text{ kg})(1.20\text{ m/s})^2 = 0.180\text{ J}.

  2. Find elastic potential energy: U=E−K=0.450 J−0.180 J=0.270 JU = E - K = 0.450\text{ J} - 0.180\text{ J} = 0.270\text{ J}.

  3. Calculate spring constant: k=2Ux2=2(0.270 J)(0.0800 m)2=84.375 N/m≈84.4 N/mk = \frac{2U}{x^2} = \frac{2(0.270\text{ J})}{(0.0800\text{ m})^2} = 84.375\text{ N/m} \approx 84.4\text{ N/m}.

  4. Calculate amplitude: A=2Ek=2(0.450 J)84.375 N/m≈0.103 mA = \sqrt{\frac{2E}{k}} = \sqrt{\frac{2(0.450\text{ J})}{84.375\text{ N/m}}} \approx 0.103\text{ m}.

Final answer

(a) k=84.4 N/mk = 84.4\text{ N/m}; (b) A=0.103 mA = 0.103\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the fundamental mechanical formulas to ensure you always square velocity in K=12mv2K = \frac{1}{2}mv^2.

  • Perform dimensional checks whenever writing down an energy expression: verify that mv2mv^2 yields J\text{J}.

  • Practice multi-step SHM problems to solidify energy partitioning between kinetic and potential forms.

OverviewACEpath Teacher's Diagnosis

02 The student mistakenly equates the total mechanical energy directly to the potential energy at position x instead of subtracting the kinetic energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    E=(12)kx2  ⟹  k=2Ex2=2(0.450)(0.0800)2  ⟹  k=0.9000.00640=140.625 N/mE = \left(\frac{1}{2}\right)kx^2 \implies k = \frac{2E}{x^2} = \frac{2(0.450)}{(0.0800)^2} \implies k = \frac{0.900}{0.00640} = 140.625\text{ N/m}

    Correct

    E=12mv2+12kx2  ⟹  k=2(E−12mv2)x2=2(0.450−0.180)(0.0800)2≈84.4 N/mE = \frac{1}{2}mv^2 + \frac{1}{2}kx^2 \implies k = \frac{2(E - \frac{1}{2}mv^2)}{x^2} = \frac{2(0.450 - 0.180)}{(0.0800)^2} \approx 84.4\text{ N/m}

    At position x=0.0800 mx = 0.0800\text{ m}, the glider has a non-zero speed (v=1.20 m/sv = 1.20\text{ m/s}), which means it carries kinetic energy K=12mv2=0.180 JK = \frac{1}{2}mv^2 = 0.180\text{ J}. You must subtract this kinetic energy from the total mechanical energy EE to find the elastic potential energy U=0.270 JU = 0.270\text{ J} before solving for kk.

  2. Step 2

    E=(12)kA2  ⟹  A=2Ek=2(0.450)140.625=0.00640=0.0800 mE = \left(\frac{1}{2}\right)kA^2 \implies A = \sqrt{\frac{2E}{k}} = \sqrt{\frac{2(0.450)}{140.625}} = \sqrt{0.00640} = 0.0800\text{ m}

    Correct

    A=2Ek=2(0.450)84.375≈0.103 mA = \sqrt{\frac{2E}{k}} = \sqrt{\frac{2(0.450)}{84.375}} \approx 0.103\text{ m}

    Your formula E=12kA2E = \frac{1}{2}kA^2 is conceptually correct for the turning point where velocity is zero. However, substituting the incorrect value of kk from Step 1 led directly to an incorrect amplitude (which circularly equaled the given intermediate position xx).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that total mechanical energy equals potential energy at the turning point, using E=12kA2E = \frac{1}{2}kA^2.

You accurately carried out the algebraic rearrangements and arithmetic operations based on your chosen formulas.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Neglecting Kinetic Energy at Intermediate Position

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the intermediate position x=0.0800 mx = 0.0800\text{ m} as if it were the turning point where v=0v = 0, equating total energy EE solely to elastic potential energy 12kx2\frac{1}{2}kx^2 instead of partitioning it into K+UK + U.

REASONING PATH
Your ACEpath teacher’s suggested approach
Energy Partition in SHM
  • At any arbitrary position xx, total energy is shared between motion and spring stretch: E=K+U=12mv2+12kx2E = K + U = \frac{1}{2}mv^2 + \frac{1}{2}kx^2.

  • Always compute K=12mv2K = \frac{1}{2}mv^2 whenever velocity is given, and subtract it from total energy EE to isolate potential energy UU.

Sanity Check on Amplitude
  • For any point during oscillation, the magnitude of position cannot exceed amplitude: ∣x∣≤A|x| \le A.

  • If your calculated amplitude AA equals an intermediate point where speed is non-zero (v>0v > 0), recheck your energy balance, as vv must be zero at x=Ax = A.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the glider's kinetic energy at x=0.0800 mx = 0.0800\text{ m}: K=12mv2=12(0.250 kg)(1.20 m/s)2=0.180 JK = \frac{1}{2}mv^2 = \frac{1}{2}(0.250\text{ kg})(1.20\text{ m/s})^2 = 0.180\text{ J}.

  2. Deduct KK from total mechanical energy EE to find elastic potential energy: U=E−K=0.450 J−0.180 J=0.270 JU = E - K = 0.450\text{ J} - 0.180\text{ J} = 0.270\text{ J}.

  3. Solve for the spring constant: k=2Ux2=2(0.270 J)(0.0800 m)2=84.375 N/m≈84.4 N/mk = \frac{2U}{x^2} = \frac{2(0.270\text{ J})}{(0.0800\text{ m})^2} = 84.375\text{ N/m} \approx 84.4\text{ N/m}.

  4. Recalculate amplitude using the correct spring constant: A=2Ek=2(0.450 J)84.375 N/m≈0.103 mA = \sqrt{\frac{2E}{k}} = \sqrt{\frac{2(0.450\text{ J})}{84.375\text{ N/m}}} \approx 0.103\text{ m}.

Final answer

(a) k≈84.4 N/mk \approx 84.4\text{ N/m}; (b) A≈0.103 mA \approx 0.103\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the energy bar-chart model for simple harmonic motion to visualize how kinetic energy and potential energy exchange continuously.

  • Practice identifying whether a stated position is a turning point (v=0v = 0), equilibrium (x=0x = 0), or a general intermediate state (v≠0v \ne 0 and x≠0x \ne 0).

OverviewACEpath Teacher's Diagnosis

03 The student forgets to square the position x when solving for the spring constant from potential energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    K=(12)mv2=(12)(0.250)(1.20)2=0.180 J  ⟹  U=E−K=0.450−0.180=0.270 JK = (\frac{1}{2})mv^2 = (\frac{1}{2})(0.250)(1.20)^2 = 0.180\text{ J} \implies U = E - K = 0.450 - 0.180 = 0.270\text{ J}

  2. Step 2

    k=2Ux=2(0.270)0.0800  ⟹  k=0.5400.0800=6.75 N/mk = \frac{2U}{x} = \frac{2(0.270)}{0.0800} \implies k = \frac{0.540}{0.0800} = 6.75\text{ N/m}

    Correct

    k=2Ux2=2(0.270 J)(0.0800 m)2=84.375 N/m≈84.4 N/mk = \frac{2U}{x^2} = \frac{2(0.270\text{ J})}{(0.0800\text{ m})^2} = 84.375\text{ N/m} \approx 84.4\text{ N/m}

    Elastic potential energy is given by U=12kx2U = \frac{1}{2}kx^2. When solving for kk, you must divide by x2x^2 rather than xx, giving k=2Ux2=0.5400.0064=84.375 N/mk = \frac{2U}{x^2} = \frac{0.540}{0.0064} = 84.375\text{ N/m}.

  3. Step 3

    E=(12)kA2  ⟹  A=2Ek=2(0.450)6.75=0.1333=0.365 mE = (\frac{1}{2})kA^2 \implies A = \sqrt{\frac{2E}{k}} = \sqrt{\frac{2(0.450)}{6.75}} = \sqrt{0.1333} = 0.365\text{ m}

    Correct

    A=2Ek=2(0.450 J)84.375 N/m≈0.103 mA = \sqrt{\frac{2E}{k}} = \sqrt{\frac{2(0.450\text{ J})}{84.375\text{ N/m}}} \approx 0.103\text{ m}

    Your algebraic relationship A=2EkA = \sqrt{\frac{2E}{k}} is completely correct, but substituting the incorrect spring constant k=6.75 N/mk = 6.75\text{ N/m} led to an incorrect numerical value for the amplitude.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the kinetic energy formula K=12mv2K = \frac{1}{2}mv^2 with the given values.

You applied the principle of conservation of mechanical energy (E=K+UE = K + U) to isolate the potential energy.

You recognized that at maximum displacement, all energy is potential energy (E=12kA2E = \frac{1}{2}kA^2).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula rearrangement error (missing exponent)

You dropped the exponent 22 on xx when rearranging U=12kx2U = \frac{1}{2}kx^2 to isolate kk.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing linear Hooke's law force (F=kxF = kx, where k=Fxk = \frac{F}{x}) with elastic potential energy (U=12kx2U = \frac{1}{2}kx^2, where k=2Ux2k = \frac{2U}{x^2}), or accidentally omitting the power during symbolic rearrangement.

REASONING PATH
Your ACEpath teacher’s suggested approach
Elastic Potential Energy Definition
  • U=12kx2U = \frac{1}{2}kx^2

  • Always write down the base formula before isolating a variable: multiplying by 22 and dividing by x2x^2 yields k=2Ux2k = \frac{2U}{x^2}.

Dimensional Analysis Check
  • [k]=N/m=Jm2[k] = \text{N/m} = \frac{\text{J}}{\text{m}^2}

  • Check your units: Ux\frac{U}{x} has units of J/m=N\text{J/m} = \text{N} (a force), whereas Ux2\frac{U}{x^2} has units of J/m2=N/m\text{J/m}^2 = \text{N/m} (a spring constant).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start from the potential energy relation: U=12kx2U = \frac{1}{2}kx^2.

  2. Isolate kk by dividing by x2x^2: k=2Ux2=2(0.270 J)(0.0800 m)2=0.540 J0.0064 m2=84.375 N/m≈84.4 N/mk = \frac{2U}{x^2} = \frac{2(0.270\text{ J})}{(0.0800\text{ m})^2} = \frac{0.540\text{ J}}{0.0064\text{ m}^2} = 84.375\text{ N/m} \approx 84.4\text{ N/m}.

  3. Substitute this value of kk into the amplitude formula: A=2Ek=2(0.450 J)84.375 N/m=0.01067 m2≈0.103 mA = \sqrt{\frac{2E}{k}} = \sqrt{\frac{2(0.450\text{ J})}{84.375\text{ N/m}}} = \sqrt{0.01067\text{ m}^2} \approx 0.103\text{ m}.

Final answer

(a) k=84.4 N/mk = 84.4\text{ N/m}; (b) A=0.103 mA = 0.103\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Perform a quick unit check whenever rearranging energy formulas to verify that energy divided by length squared yields spring stiffness.

  • Double-check that intermediate calculated values preserve several decimal places before using them in subsequent steps.

Lock it in

Similar question

01

A 0.400 kg0.400\text{ kg} block on a frictionless horizontal surface is connected to a spring. At x=0.0500 mx = 0.0500\text{ m}, the block has a speed of 1.50 m/s1.50\text{ m/s}. Calculate the kinetic energy KK of the block at this position.

Answer

K=12mv2=12(0.400 kg)(1.50 m/s)2=12(0.400)(2.25)=0.450 JK = \frac{1}{2}mv^2 = \frac{1}{2}(0.400\text{ kg})(1.50\text{ m/s})^2 = \frac{1}{2}(0.400)(2.25) = 0.450\text{ J}.

02

A horizontal mass-spring oscillator has a total mechanical energy of 1.20 J1.20\text{ J}. A 0.300 kg0.300\text{ kg} mass is observed moving at 2.00 m/s2.00\text{ m/s} when it is at x=0.100 mx = 0.100\text{ m}. Determine the spring constant kk.

Answer
  1. Kinetic energy: K=12mv2=12(0.300 kg)(2.00 m/s)2=0.600 JK = \frac{1}{2}mv^2 = \frac{1}{2}(0.300\text{ kg})(2.00\text{ m/s})^2 = 0.600\text{ J}.
  2. Potential energy: U=E−K=1.20 J−0.600 J=0.600 JU = E - K = 1.20\text{ J} - 0.600\text{ J} = 0.600\text{ J}.
  3. Spring constant: k=2Ux2=2(0.600 J)(0.100 m)2=120 N/mk = \frac{2U}{x^2} = \frac{2(0.600\text{ J})}{(0.100\text{ m})^2} = 120\text{ N/m}.
03

A 0.200 kg0.200\text{ kg} object on a spring (k=50.0 N/mk = 50.0\text{ N/m}) oscillates with an amplitude of 0.120 m0.120\text{ m}. Find the speed of the object when it is located at x=0.0800 mx = 0.0800\text{ m} from equilibrium.

Answer
  1. Total energy: E=12kA2=12(50.0)(0.120)2=0.360 JE = \frac{1}{2}kA^2 = \frac{1}{2}(50.0)(0.120)^2 = 0.360\text{ J}.
  2. Potential energy at xx: U=12kx2=12(50.0)(0.0800)2=0.160 JU = \frac{1}{2}kx^2 = \frac{1}{2}(50.0)(0.0800)^2 = 0.160\text{ J}.
  3. Kinetic energy: K=E−U=0.360 J−0.160 J=0.200 JK = E - U = 0.360\text{ J} - 0.160\text{ J} = 0.200\text{ J}.
  4. Speed: v=2Km=2(0.200 J)0.200 kg=2.00≈1.41 m/sv = \sqrt{\frac{2K}{m}} = \sqrt{\frac{2(0.200\text{ J})}{0.200\text{ kg}}} = \sqrt{2.00} \approx 1.41\text{ m/s}.
Loading workspace…