Resources

An electric delivery van travels along a straight, level avenue at a constant speed of v=18.0 m/sv = 18.0\text{ m/s} in the positive xx-direction. If the van passes the reference origin x0=0 mx_0 = 0\text{ m} at time t=0 st = 0\text{ s}, calculate its position xx at t=45.0 st = 45.0\text{ s} and determine the total elapsed time required for the van to reach a depot located at x=1.62 kmx = 1.62\text{ km}.

Answer and steps

Final answer

At t=45.0 st = 45.0\text{ s}, x=810 mx = 810\text{ m}; the total time to reach the depot is t=90.0 st = 90.0\text{ s}.

Steps

01

Model of Uniform Linear Motion

Because the delivery van moves at a constant speed along a straight line in the positive xx-direction, its acceleration is zero. The position xx at any time tt is described by the equation for uniform motion:

x=x0+vtx = x_0 + v t

Given values:

  • Initial position: x0=0 mx_0 = 0\text{ m} at t=0 st = 0\text{ s}
  • Velocity: v=18.0 m/sv = 18.0\text{ m/s}

02

Finding Position at t=45.0 st = 45.0\text{ s}

Substitute the given time into the kinematic equation:

x=0 m+(18.0 m/s)(45.0 s)x = 0\text{ m} + (18.0\text{ m/s})(45.0\text{ s})

x=810 mx = 810\text{ m}


03

Finding Elapsed Time to Reach the Depot

Before solving for time, convert the depot's position from kilometers to meters so the units are consistent with the velocity:

xdepot=1.62 km=1.62×103 m=1620 mx_{\text{depot}} = 1.62\text{ km} = 1.62 \times 10^3\text{ m} = 1620\text{ m}

Common Pitfall: Forgetting to convert kilometers to meters (1.62 km→1620 m1.62\text{ km} \to 1620\text{ m}) before dividing by velocity in m/s\text{m/s} leads to an answer off by a factor of 10001000.

Now, rearrange the motion equation to solve for elapsed time tt:

t=xdepot−x0vt = \frac{x_{\text{depot}} - x_0}{v}

t=1620 m18.0 m/s=90.0 st = \frac{1620\text{ m}}{18.0\text{ m/s}} = 90.0\text{ s}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert kilometers to meters when solving for time, leading to an elapsed time of 0.090 s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    x=v∗t  ⟹  x=18.0∗45.0=810 mx = v * t \implies x = 18.0 * 45.0 = 810\text{ m}

  2. Step 2

    t=xv  ⟹  t=1.6218.0=0.090 st = \frac{x}{v} \implies t = \frac{1.62}{18.0} = 0.090\text{ s}

    Correct

    t=xv=1620 m18.0 m/s=90.0 st = \frac{x}{v} = \frac{1620\text{ m}}{18.0\text{ m/s}} = 90.0\text{ s}

    You correctly rearranged the equation to t=xvt = \frac{x}{v}, but you substituted distance as 1.62 km1.62\text{ km} directly. Because the velocity is given in m/s\text{m/s}, the position must be converted to meters (1.62 km=1620 m1.62\text{ km} = 1620\text{ m}) before dividing.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly chose the kinematic equation x=vtx = v t for motion at constant velocity.

You accurately calculated the van's position at t=45.0 st = 45.0\text{ s} as 810 m810\text{ m}.

You correctly manipulated the algebraic relationship to solve for elapsed time as t=xvt = \frac{x}{v}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion error (km to m)

You divided kilometers by meters per second without first converting kilometers to meters.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Inconsistent unit substitution during formula evaluation: omitting the prefix conversion (1 km=1000 m1\text{ km} = 1000\text{ m}) when combining distance with a speed expressed in meters per second.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Consistency Check
  • In kinematic relationships like t=xvt = \frac{x}{v}, distance and velocity must share the same base length unit (meters) to yield time in seconds: mm/s=s\frac{\text{m}}{\text{m/s}} = \text{s}.

  • Always convert non-SI prefixes (like kilometers) into base SI units (meters) before substituting values, and verify whether the resulting elapsed time is physically realistic for the given distance.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the distance of the depot from kilometers to meters: x=1.62 km=1.62×1000 m=1620 mx = 1.62\text{ km} = 1.62 \times 1000\text{ m} = 1620\text{ m}.

  2. Substitute the converted distance and velocity into the time formula: t=1620 m18.0 m/st = \frac{1620\text{ m}}{18.0\text{ m/s}}.

  3. Evaluate the division to obtain the elapsed time: t=90.0 st = 90.0\text{ s}.

Final answer

At t=45.0 st = 45.0\text{ s}, x=810 mx = 810\text{ m}; the total time to reach the depot is t=90.0 st = 90.0\text{ s}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out explicit unit labels alongside each numerical value in your working lines to immediately spot mismatched units.

  • Do a quick physical sense-check on your final answer: traveling over 1.6 km1.6\text{ km} at city driving speeds cannot take less than a tenth of a second.

OverviewACEpath Teacher's Diagnosis

02 The student misapplies the kinematics relation by multiplying position by velocity instead of dividing, resulting in an elapsed time of 29160 s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    x=v∗t  ⟹  x=18.0∗45.0=810 mx = v * t \implies x = 18.0 * 45.0 = 810\text{ m}

  2. Step 2

    x=1.62 km=1620 mx = 1.62\text{ km} = 1620\text{ m}

  3. Step 3

    t=x∗v  ⟹  t=1620∗18.0=29160 st = x * v \implies t = 1620 * 18.0 = 29160\text{ s}

    Correct

    t=xv=1620 m18.0 m/s=90.0 st = \frac{x}{v} = \frac{1620\text{ m}}{18.0\text{ m/s}} = 90.0\text{ s}

    To solve x=vtx = vt for time tt, you need to divide both sides by vv, giving t=xvt = \frac{x}{v}. Multiplying xx by vv gives units of m2/s\text{m}^2/\text{s} rather than seconds.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the kinematic relation x=vtx = vt to find the position at 45.0 s45.0\text{ s}.

You converted the depot distance from kilometers to meters accurately before computing the time.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic rearrangement error

You set t=x⋅vt = x \cdot v instead of dividing position by velocity (t=xvt = \frac{x}{v}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the multiplication operation incorrectly when isolating tt from x=vtx = vt. Dividing distance by velocity yields elapsed time with correct units of seconds, whereas multiplying yields an inconsistent dimensional quantity.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolating the Target Variable
  • When x=vtx = vt, isolate tt by dividing both sides by vv: t=xvt = \frac{x}{v}.

  • Check that the algebraic operation undoes the relationship: because vv multiplies tt, you must divide by vv to isolate tt.

Dimensional Unit Check
  • Units on both sides of an equation must balance: mm/s=s\frac{\text{m}}{\text{m/s}} = \text{s}.

  • Carry units into your calculation: m⋅(m/s)=m2/s\text{m} \cdot (\text{m/s}) = \text{m}^2/\text{s} reveals an incorrect arrangement immediately.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Rearrange the uniform motion equation x=vtx = vt to solve for time: t=xvt = \frac{x}{v}.

  2. Substitute the converted distance and velocity: t=1620 m18.0 m/s=90.0 st = \frac{1620\text{ m}}{18.0\text{ m/s}} = 90.0\text{ s}.

Final answer

At t=45.0 st = 45.0\text{ s}, x=810 mx = 810\text{ m}; the total time to reach the depot is t=90.0 st = 90.0\text{ s}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice rearranging standard three-variable physical equations such as x=vtx = vt, v=dtv = \frac{d}{t}, and F=maF = ma before plugging in numbers.

  • Always write out the units alongside numbers to verify that the final unit matches the target quantity.

OverviewACEpath Teacher's Diagnosis

03 The student inappropriately uses the kinematics equation for constant acceleration with a = 18.0 m/s², calculating a position of 18225 m.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    x=12⋅a⋅t2  ⟹  x=0.5⋅18.0⋅(45.0)2  ⟹  x=9.0⋅2025=18225 mx = \frac{1}{2} \cdot a \cdot t^2 \implies x = 0.5 \cdot 18.0 \cdot (45.0)^2 \implies x = 9.0 \cdot 2025 = 18225\text{ m}

    Correct

    x=x0+vt=0 m+(18.0 m/s)(45.0 s)=810 mx = x_0 + v t = 0\text{ m} + (18.0\text{ m/s})(45.0\text{ s}) = 810\text{ m}

    You applied the formula for motion under constant acceleration, x=12at2x = \frac{1}{2}at^2, substituting the speed 18.0 m/s18.0\text{ m/s} in place of acceleration aa. Because the problem states that the van travels at a constant speed, the acceleration is zero (a=0 m/s2a = 0\text{ m/s}^2), which means position increases linearly as x=vtx = vt.

  2. Step 2

    x=1.62 km=1620 m  ⟹  t=xv  ⟹  t=162018.0=90.0 sx = 1.62\text{ km} = 1620\text{ m} \implies t = \frac{x}{v} \implies t = \frac{1620}{18.0} = 90.0\text{ s}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized the need to convert kilometers into meters before computing the travel time.

You accurately solved for time using the uniform motion relation t=xvt = \frac{x}{v} in the second part of the question.

You carried out the arithmetic and squaring operations accurately based on the formula you selected.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Kinematic Formula Selection

No, this was not a casual arithmetic slip; it reflects a conceptual confusion between constant velocity and constant acceleration in the first part of the problem.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated the quadratic kinematic relation x=12at2x = \frac{1}{2}at^2 with one-dimensional motion and substituted the given velocity value (18.0 m/s18.0\text{ m/s}) into the acceleration variable aa, overlooking that 'constant speed' implies a=0 m/s2a = 0\text{ m/s}^2 and requires the linear relation x=vtx = vt.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the Motion Model
  • If speed or velocity is constant, acceleration is a=0 m/s2a = 0\text{ m/s}^2, and the equation of motion is x=x0+vtx = x_0 + vt.

  • Always underline keywords like 'constant speed' or 'at rest' before selecting a formula.

Verify Variable Units
  • Velocity is measured in m/s\text{m/s}, whereas acceleration is measured in m/s2\text{m/s}^2.

  • Check that the numerical value being inserted into a formula matches the dimension and units of that specific symbol.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the motion type: The problem states that the van travels at a constant speed of v=18.0 m/sv = 18.0\text{ m/s}, so acceleration a=0 m/s2a = 0\text{ m/s}^2.

  2. Apply the uniform motion position formula: x=x0+vtx = x_0 + vt.

  3. Substitute the initial conditions and time: x=0 m+(18.0 m/s)(45.0 s)=810 mx = 0\text{ m} + (18.0\text{ m/s})(45.0\text{ s}) = 810\text{ m}.

Final answer

At t=45.0 st = 45.0\text{ s}, x=810 mx = 810\text{ m}; the total time to reach the depot is t=90.0 st = 90.0\text{ s}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice categorizing kinematics problems into 'zero acceleration' (x=vtx = vt) versus 'constant acceleration' (x=v0t+12at2x = v_0 t + \frac{1}{2}at^2) before writing down any equations.

  • Always label given quantities with their full units (such as v=18.0 m/sv = 18.0\text{ m/s}) to avoid placing a velocity into an acceleration variable.

Lock it in

Similar question

01

A cyclist travels along a straight road at a constant speed of 5.0 m/s5.0\text{ m/s}. How many seconds does it take the cyclist to reach a landmark located 0.40 km0.40\text{ km} away?

Answer

t=80 st = 80\text{ s}. First convert distance to SI base units: x=0.40 km=400 mx = 0.40\text{ km} = 400\text{ m}. Then apply uniform motion: t=xv=400 m5.0 m/s=80 st = \frac{x}{v} = \frac{400\text{ m}}{5.0\text{ m/s}} = 80\text{ s}.

02

A passenger train moves along a straight track at a constant velocity of 25.0 m/s25.0\text{ m/s}. Calculate its displacement after 1.5 minutes1.5\text{ minutes}, and determine how many seconds it takes to cover a distance of 3.75 km3.75\text{ km}.

Answer

Displacement: x=2250 mx = 2250\text{ m} (or 2.25 km2.25\text{ km}); time: t=150 st = 150\text{ s}. For displacement, convert time to seconds: t=1.5 min=90 st = 1.5\text{ min} = 90\text{ s}, so x=(25.0 m/s)(90 s)=2250 mx = (25.0\text{ m/s})(90\text{ s}) = 2250\text{ m}. For travel time, convert distance to meters: x=3.75 km=3750 mx = 3.75\text{ km} = 3750\text{ m}, so t=3750 m25.0 m/s=150 st = \frac{3750\text{ m}}{25.0\text{ m/s}} = 150\text{ s}.

03

A delivery van travels along a straight route at a constant speed of 20.0 m/s20.0\text{ m/s}. It passes a marker at t=0 st = 0\text{ s}. A drone departs the same marker 40.0 s40.0\text{ s} later in the same direction at a constant speed of 30.0 m/s30.0\text{ m/s}. Find the time tt and distance xx from the marker at which the drone overtakes the van, and verify whether the overtake occurs before a depot located 2.50 km2.50\text{ km} from the marker.

Answer

The drone overtakes the van at t=120 st = 120\text{ s} and x=2400 mx = 2400\text{ m} (2.40 km2.40\text{ km}), which is before the depot at 2.50 km2.50\text{ km} (2500 m2500\text{ m}). Position equations: xvan(t)=20.0tx_{\text{van}}(t) = 20.0 t and xdrone(t)=30.0(t−40.0)x_{\text{drone}}(t) = 30.0(t - 40.0) for t≥40.0 st \ge 40.0\text{ s}. Equating positions gives 20.0t=30.0t−1200  ⟹  10.0t=1200  ⟹  t=120 s20.0 t = 30.0 t - 1200 \implies 10.0 t = 1200 \implies t = 120\text{ s}. Then x=(20.0 m/s)(120 s)=2400 m=2.40 km<2.50 kmx = (20.0\text{ m/s})(120\text{ s}) = 2400\text{ m} = 2.40\text{ km} < 2.50\text{ km}.

Loading workspace…