Resources

A block of mass m=6.50 kgm = 6.50\text{ kg} rests on a ramp inclined at an angle θ=28.0∘\theta = 28.0^\circ above the horizontal. Define a tilted Cartesian coordinate system where the positive xx-axis points directly down the incline and the positive yy-axis points perpendicular to the ramp surface away from the incline. Taking the acceleration due to gravity as g=9.80 m/s2g = 9.80\text{ m/s}^2, resolve the gravitational force vector F⃗g\vec{F}_g acting on the block into its parallel (Fg,∥F_{g,\parallel}) and perpendicular (Fg,⊥F_{g,\perp}) components along this chosen coordinate system.

Answer and steps

Final answer

Fg,∥=+29.9 NF_{g,\parallel} = +29.9\text{ N} (down the incline), Fg,⊥=−56.2 NF_{g,\perp} = -56.2\text{ N} (into the incline)

Steps

01

Calculate the Total Gravitational Force

The magnitude of the gravitational force (weight) acting straight downward on the block is given by:

Fg=mgF_g = m g

Substitute the given values for mass mm and acceleration due to gravity gg:

Fg=(6.50 kg)(9.80 m/s2)=63.7 NF_g = (6.50\text{ kg})(9.80\text{ m/s}^2) = 63.7\text{ N}


02

Determine the Geometric Relationship of the Components

When a ramp is tilted at an angle θ\theta to the horizontal, the angle between the true vertical (the direction of F⃗g\vec{F}_g) and the line perpendicular to the ramp surface is also equal to θ\theta:

  • The component of gravity acting parallel to the surface points down the ramp and corresponds to the side opposite to θ\theta: ∣Fg,∥∣=Fgsin⁡θ|F_{g,\parallel}| = F_g \sin\theta
  • The component of gravity acting perpendicular to the surface points into the ramp and corresponds to the side adjacent to θ\theta: ∣Fg,⊥∣=Fgcos⁡θ|F_{g,\perp}| = F_g \cos\theta

03

Compute the Parallel Component (Fg,∥F_{g,\parallel})

The positive xx-axis is defined as pointing down the incline. Since gravity pulls the block down the incline:

Fg,∥=+Fgsin⁡(28.0∘)F_{g,\parallel} = +F_g \sin(28.0^\circ)

Fg,∥=+(63.7 N)⋅sin⁡(28.0∘)≈+(63.7 N)(0.4695)≈+29.9 NF_{g,\parallel} = +(63.7\text{ N}) \cdot \sin(28.0^\circ) \approx +(63.7\text{ N})(0.4695) \approx +29.9\text{ N}


04

Compute the Perpendicular Component (Fg,⊥F_{g,\perp})

The positive yy-axis is defined as pointing away from (normal to) the ramp surface. The gravitational force presses the block into the ramp surface (in the negative yy-direction):

Fg,⊥=−Fgcos⁡(28.0∘)F_{g,\perp} = -F_g \cos(28.0^\circ)

Fg,⊥=−(63.7 N)⋅cos⁡(28.0∘)≈−(63.7 N)(0.8829)≈−56.2 NF_{g,\perp} = -(63.7\text{ N}) \cdot \cos(28.0^\circ) \approx -(63.7\text{ N})(0.8829) \approx -56.2\text{ N}


Common Pitfall

A frequent error is automatically assigning cos⁡θ\cos\theta to the horizontal or parallel direction and sin⁡θ\sin\theta to the vertical direction. On an inclined plane, the angle θ\theta is measured from the horizontal ground, which makes the angle between the true downward vertical and the perpendicular normal axis equal to θ\theta. Therefore, sin⁡θ\sin\theta governs the component parallel to the slope, while cos⁡θ\cos\theta governs the component perpendicular to the slope. Always verify the signs against the defined coordinate axes.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student swaps the sine and cosine trigonometric functions when resolving gravity components along and perpendicular to the inclined ramp.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Fg=mg=(6.50)(9.80)=63.7 NF_g = mg = (6.50)(9.80) = 63.7\text{ N}

  2. Step 2

    F(g,∥)=mgcos⁡θ=(63.7)cos⁡(28.0∘)  ⟹  F(g,∥)=56.2 NF_{(g,\parallel)} = mg\cos\theta = (63.7)\cos(28.0^\circ) \implies F_{(g,\parallel)} = 56.2\text{ N}

    Correct

    Fg,∥=+mgsin⁡θ=+(63.7 N)sin⁡(28.0∘)=+29.9 NF_{g,\parallel} = +mg\sin\theta = +(63.7\text{ N})\sin(28.0^\circ) = +29.9\text{ N}

    On an incline of angle θ\theta measured from the horizontal, the component of gravity parallel to the incline is opposite to the angle θ\theta in the force triangle, which requires sin⁡θ\sin\theta rather than cos⁡θ\cos\theta.

  3. Step 3

    F(g,⊥)=−mgsin⁡θ=−(63.7)sin⁡(28.0∘)  ⟹  F(g,⊥)=−29.9 NF_{(g,\perp)} = -mg\sin\theta = -(63.7)\sin(28.0^\circ) \implies F_{(g,\perp)} = -29.9\text{ N}

    Correct

    Fg,⊥=−mgcos⁡θ=−(63.7 N)cos⁡(28.0∘)=−56.2 NF_{g,\perp} = -mg\cos\theta = -(63.7\text{ N})\cos(28.0^\circ) = -56.2\text{ N}

    The perpendicular component is adjacent to the angle θ\theta between the true vertical and the perpendicular axis, so it uses cos⁡θ\cos\theta. While you correctly assigned the negative sign, using sin⁡θ\sin\theta gave the incorrect numerical value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the total magnitude of the gravitational force using Fg=mgF_g = mg.

You correctly identified that the perpendicular component points into the ramp along the negative yy-axis and included the negative sign.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Function Swap on Inclined Plane

You assigned cosine to the parallel direction and sine to the perpendicular direction.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Because standard horizontal vector resolution typically uses cos⁡θ\cos\theta for the xx-axis, you may have carried this habit over to the ramp's slope (xx-axis). However, the ramp angle θ\theta is measured from the horizontal ground, which makes the angle between the downward vertical gravity vector and the perpendicular axis equal to θ\theta. Consequently, the parallel component corresponds to the opposite side (mgsin⁡θmg\sin\theta) and the perpendicular component corresponds to the adjacent side (mgcos⁡θmg\cos\theta).

REASONING PATH
Your ACEpath teacher’s suggested approach
Angle Alignment in Force Triangle
  • On a ramp inclined at θ\theta above the horizontal, the angle between the vertical F⃗g\vec{F}_g and the normal (perpendicular) axis is θ\theta.

  • Always draw the right triangle formed by F⃗g\vec{F}_g, identify which leg is adjacent to θ\theta (perpendicular), and which leg is opposite θ\theta (parallel).

Limiting Case Sanity Check
  • As the ramp becomes completely flat (θ→0∘\theta \to 0^\circ), the parallel sliding force must vanish (Fg,∥→0F_{g,\parallel} \to 0), and the perpendicular force must equal full weight (∣Fg,⊥∣→mg|F_{g,\perp}| \to mg).

  • Test your formulas with θ=0∘\theta = 0^\circ: sin⁡(0∘)=0\sin(0^\circ) = 0 confirms Fg,∥=mgsin⁡θF_{g,\parallel} = mg\sin\theta, and cos⁡(0∘)=1\cos(0^\circ) = 1 confirms ∣Fg,⊥∣=mgcos⁡θ|F_{g,\perp}| = mg\cos\theta.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use Fg,∥=+mgsin⁡(28.0∘)=+(63.7 N)(0.4695)≈+29.9 NF_{g,\parallel} = +mg\sin(28.0^\circ) = +(63.7\text{ N})(0.4695) \approx +29.9\text{ N}.

  2. Use Fg,⊥=−mgcos⁡(28.0∘)=−(63.7 N)(0.8829)≈−56.2 NF_{g,\perp} = -mg\cos(28.0^\circ) = -(63.7\text{ N})(0.8829) \approx -56.2\text{ N}.

Final answer

Fg,∥=+29.9 NF_{g,\parallel} = +29.9\text{ N}, Fg,⊥=−56.2 NF_{g,\perp} = -56.2\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a clear vector triangle showing F⃗g\vec{F}_g as the hypotenuse, with angle θ\theta located at the top vertex between F⃗g\vec{F}_g and the perpendicular axis.

  • Perform a quick 0∘0^\circ limit test before calculating components on an inclined plane to verify that your sine and cosine assignments match reality.

OverviewACEpath Teacher's Diagnosis

02 The student fails to account for the defined positive y-axis pointing away from the ramp and gives a positive value for the perpendicular component of gravity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Fg=mg=(6.50)(9.80)=63.7 NF_g = mg = (6.50)(9.80) = 63.7\text{ N}

  2. Step 2

    F(g,∥)=mgsin⁡θ=(63.7)sin⁡(28.0∘)  ⟹  F(g,∥)=29.9 NF_{(g,\parallel)} = mg \sin\theta = (63.7)\sin(28.0^\circ) \implies F_{(g,\parallel)} = 29.9\text{ N}

  3. Step 3

    F(g,⊥)=mgcos⁡θ=(63.7)cos⁡(28.0∘)  ⟹  F(g,⊥)=56.2 NF_{(g,\perp)} = mg \cos\theta = (63.7)\cos(28.0^\circ) \implies F_{(g,\perp)} = 56.2\text{ N}

    Correct

    Fg,⊥=−mgcos⁡θ=−(63.7 N)cos⁡(28.0∘)=−56.2 NF_{g,\perp} = -mg \cos\theta = -(63.7\text{ N})\cos(28.0^\circ) = -56.2\text{ N}

    The magnitude is correct, but the positive yy-axis is defined as pointing away from the incline surface. Because gravity pulls the block directly into the surface, this component points along the negative yy-direction.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the total weight of the block using Fg=mgF_g = mg.

You correctly matched sin⁡θ\sin\theta to the parallel direction and cos⁡θ\cos\theta to the perpendicular direction on the incline.

You correctly determined that the parallel component of gravity acts in the positive direction down the ramp.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Coordinate Sign

You calculated the absolute magnitude 56.2 N56.2\text{ N} instead of assigning the signed vector component along the defined axis.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating vector component magnitude with signed scalar components defined by a tilted coordinate system. When the coordinate axis points outward from a surface, any force pulling inward must carry a negative sign.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Defined Axis Directions
  • Components along a coordinate axis must be positive if they point along the axis and negative if they point opposite to it.

  • Before writing final scalar components, sketch your coordinate axes and verify whether each vector arrow points in the positive or negative direction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Note that the positive yy-axis points outward from the incline.

  2. Because gravity pulls into the incline, the perpendicular component is oriented in the −y-y direction: Fg,⊥=−mgcos⁡θF_{g,\perp} = -mg \cos\theta.

  3. Substitute the values: Fg,⊥=−(63.7 N)cos⁡(28.0∘)≈−56.2 NF_{g,\perp} = -(63.7\text{ N}) \cos(28.0^\circ) \approx -56.2\text{ N}.

Final answer

Fg,∥=+29.9 NF_{g,\parallel} = +29.9\text{ N}, Fg,⊥=−56.2 NF_{g,\perp} = -56.2\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always draw the coordinate axes directly on your free-body diagram before resolving vectors.

  • Check each component individually to ensure its algebraic sign matches your chosen positive axis direction.

OverviewACEpath Teacher's Diagnosis

03 The student evaluates the trigonometric functions with the calculator set in radians instead of degrees, leading to incorrect values for both components.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Fg=mg=(6.50)(9.80)=63.7 NF_g = mg = (6.50)(9.80) = 63.7\text{ N}

  2. Step 2

    F(g,∥)=mgsin⁡(28.0∘)=(63.7)(−0.2709)  ⟹  F(g,∥)=−17.3 NF_{(g,\parallel)} = mg\sin(28.0^\circ) = (63.7)(-0.2709) \implies F_{(g,\parallel)} = -17.3\text{ N}

    Correct

    Fg,∥=+mgsin⁡(28.0∘)=(63.7 N)(0.4695)≈+29.9 NF_{g,\parallel} = +mg\sin(28.0^\circ) = (63.7\text{ N})(0.4695) \approx +29.9\text{ N}

    You selected the correct formula and coordinate sign for the parallel component, but evaluated sin⁡(28)\sin(28) in radians (which gives approximately −0.2709-0.2709) rather than degrees (where sin⁡(28.0∘)≈0.4695\sin(28.0^\circ) \approx 0.4695).

  3. Step 3

    F(g,⊥)=−mgcos⁡(28.0∘)=−(63.7)(−0.9626)  ⟹  F(g,⊥)=61.3 NF_{(g,\perp)} = -mg\cos(28.0^\circ) = -(63.7)(-0.9626) \implies F_{(g,\perp)} = 61.3\text{ N}

    Correct

    Fg,⊥=−mgcos⁡(28.0∘)=−(63.7 N)(0.8829)≈−56.2 NF_{g,\perp} = -mg\cos(28.0^\circ) = -(63.7\text{ N})(0.8829) \approx -56.2\text{ N}

    You correctly assigned the negative sign pointing into the ramp for the perpendicular component, but evaluated cos⁡(28)\cos(28) in radians (giving −0.9626-0.9626) instead of degrees (where cos⁡(28.0∘)≈0.8829\cos(28.0^\circ) \approx 0.8829).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the total weight of the block using Fg=mgF_g = mg.

You correctly identified that the component parallel to the slope uses the sine function and the perpendicular component uses the cosine function.

You correctly accounted for the negative direction along the perpendicular yy-axis.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Radian vs. Degree Mode Misconfiguration

You evaluated trigonometric functions with your calculator set to radians instead of degrees.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

The input angle is given in degrees (28.0∘28.0^\circ), but standard scientific calculators default or switch to radians. In radians, 28 rad≈4.456π28\text{ rad} \approx 4.456\pi, placing the angle in the third quadrant where both sine and cosine are negative, which distorted both the magnitudes and signs of your final components.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Angle Mode Before Computing
  • Whenever an angle has the degree symbol (∘^\circ), ensure the calculator display indicates 'DEG' rather than 'RAD'.

  • Quick sanity check: verify that sin⁡(30∘)=0.5\sin(30^\circ) = 0.5 or cos⁡(0∘)=1\cos(0^\circ) = 1 on your device before performing calculations.

Physical Reality Check for Components
  • For an acute incline angle θ∈(0∘,90∘)\theta \in (0^\circ, 90^\circ), both sin⁡θ\sin\theta and cos⁡θ\cos\theta must be strictly positive values between 00 and 11.

  • If your trigonometric ratio produces a negative number for an acute angle on an incline, immediately stop and switch your calculator mode to degrees.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the calculator to degree mode and evaluate the trigonometric ratios: sin⁡(28.0∘)≈0.4695\sin(28.0^\circ) \approx 0.4695 and cos⁡(28.0∘)≈0.8829\cos(28.0^\circ) \approx 0.8829.

  2. Calculate the parallel component along the positive xx-axis: Fg,∥=+(63.7 N)sin⁡(28.0∘)=(63.7)(0.4695)≈+29.9 NF_{g,\parallel} = +(63.7\text{ N})\sin(28.0^\circ) = (63.7)(0.4695) \approx +29.9\text{ N}.

  3. Calculate the perpendicular component along the negative yy-axis: Fg,⊥=−(63.7 N)cos⁡(28.0∘)=−(63.7)(0.8829)≈−56.2 NF_{g,\perp} = -(63.7\text{ N})\cos(28.0^\circ) = -(63.7)(0.8829) \approx -56.2\text{ N}.

Final answer

Fg,∥=+29.9 NF_{g,\parallel} = +29.9\text{ N}, Fg,⊥=−56.2 NF_{g,\perp} = -56.2\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that the 'DEG' indicator is lit on your calculator display whenever working with angles specified in degrees.

  • Perform a quick mental range check: for an incline of 28.0∘28.0^\circ, the slope is relatively shallow, so the perpendicular component into the ramp must be larger in magnitude than the parallel component down the ramp (56.2 N>29.9 N56.2\text{ N} > 29.9\text{ N}).

  • Practice resolving vectors on tilted planes to reinforce the habit of checking trigonometric sign conventions and calculator modes.

Lock it in

Similar question

01

A 4.00 kg4.00\text{ kg} crate rests on a ramp inclined at 35.0∘35.0^\circ to the horizontal. With the positive xx-axis defined down the incline and g=9.80 m/s2g = 9.80\text{ m/s}^2, find the magnitude and sign of the component of weight parallel to the incline (Fg,∥F_{g,\parallel}).

Answer

Fg,∥=+mgsin⁡(35.0∘)=+(4.00)(9.80)sin⁡(35.0∘)=+22.5 NF_{g,\parallel} = +mg\sin(35.0^\circ) = +(4.00)(9.80)\sin(35.0^\circ) = +22.5\text{ N} (down the incline).

02

A 12.0 kg12.0\text{ kg} sled sits on an icy slope inclined at 20.0∘20.0^\circ above the horizontal. With the positive yy-axis pointing perpendicular to the slope away from the surface, calculate the perpendicular component of gravity (Fg,⊥F_{g,\perp}) acting on the sled. Take g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

Fg,⊥=−mgcos⁡(20.0∘)=−(12.0)(9.80)cos⁡(20.0∘)≈−111 NF_{g,\perp} = -mg\cos(20.0^\circ) = -(12.0)(9.80)\cos(20.0^\circ) \approx -111\text{ N} (pressing into the slope).

03

A block slides down a ramp inclined at angle θ\theta. An engineer defines the coordinate axes such that +x+x points up the incline and +y+y points directly into the ramp surface. Write the vector components of the gravitational force F⃗g=(Fgx,Fgy)\vec{F}_g = (F_{gx}, F_{gy}) in terms of mm, gg, and θ\theta, and evaluate them for m=5.00 kgm = 5.00\text{ kg}, θ=40.0∘\theta = 40.0^\circ, and g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

Gravity pulls down the slope (opposite +x+x) and into the surface (along +y+y): Fgx=−mgsin⁡θ=−(5.00)(9.80)sin⁡(40.0∘)≈−31.5 NF_{gx} = -mg\sin\theta = -(5.00)(9.80)\sin(40.0^\circ) \approx -31.5\text{ N}, and Fgy=+mgcos⁡θ=+(5.00)(9.80)cos⁡(40.0∘)≈+37.5 NF_{gy} = +mg\cos\theta = +(5.00)(9.80)\cos(40.0^\circ) \approx +37.5\text{ N}.

Loading workspace…