Resources
A small wooden cart of mass sits on a smooth table inclined at an angle of above the horizontal. The cart is connected via an ideal, massless string running over a frictionless pulley at the top of the incline to a suspended counterweight of mass . The coefficient of kinetic friction between the cart and the incline is . Upon release from rest, the hanging mass accelerates downward. Determine the magnitude of the linear acceleration of the system and the tension in the connecting string. Use .
Answer and steps
Final answer
,
Steps
Identify the forces acting on each mass
Since the connecting string is ideal and the pulley is frictionless, both masses share the same acceleration magnitude , and the tension is uniform throughout the string. Because mass accelerates downward, mass accelerates up the incline.
-
For the cart on the incline ():
- Perpendicular to the incline: The cart is in equilibrium in this direction:
- Parallel to the incline: Motion is directed up the incline. The tension pulls upward, while the component of gravity down the slope and kinetic friction oppose the motion: Applying Newton's second law along the incline (choosing up the incline as positive):
-
For the hanging mass ():
- Choosing downward as the positive direction:
Calculate individual force components
Using and :
Compute the forces acting on :
- Gravitational component down the incline:
- Normal force:
- Kinetic friction force:
Downward gravitational force on :
Determine the acceleration
Add Equation (1) and Equation (2) to eliminate the internal tension :
Substitute the numerical values:
Determine the tension
Substitute back into Equation (2):
Typical errors
01 The student forgets that friction opposes the direction of motion and mistakenly adds the friction force down the incline as assisting tension up the incline.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Because the hanging mass accelerates downward, the cart moves up the incline. Kinetic friction must oppose this motion and point down the incline, so its term should be rather than .
- Step 3Correct
Your formula for tension is correct, but your numerical result was affected by the incorrect acceleration value from Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly resolved the gravitational force into perpendicular and parallel components along the incline.
You accurately calculated the normal force and the magnitude of kinetic friction.
You correctly set up Newton's second law for the hanging mass.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the kinetic friction force as acting in the same direction as the tension (up the incline) rather than opposing the upward velocity of the cart along the incline.
REASONING PATH
Your ACEpath teacher’s suggested approach- Direction of Kinetic Friction
Kinetic friction always acts parallel to the contact surface and directly opposite to the direction of relative sliding motion.
Identify the direction of velocity along the surface first, then draw the friction vector pointing in the exact opposite direction before assigning signs in .
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite Newton's second law for with friction opposing upward motion: .
Add the equation for () to eliminate : .
Substitute the values: .
Substitute back into : .
,
02 The student uses the total mass of the hanging counterweight alone or omits the cart mass in Newton's second law when solving for system acceleration.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
When treating the connected objects as one system, the net external force accelerates both masses together, so the total inertia is , not just .
- Step 4Correct
Your formula for the tension from the free-body diagram of is correct, but your numerical result was thrown off by the incorrect acceleration value.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly resolved the gravitational force on the inclined cart into perpendicular and parallel components.
You calculated the normal force and kinetic friction with accurate values.
You properly set up the equation for the net external driving force along the line of motion.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou divided the net system force by only the hanging mass instead of the total system mass .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating a single-body free-body equation with a whole-system equation of motion. If you eliminate internal tension by looking at the entire coupled system, you must apply . Alternatively, if you apply to alone, you must explicitly include the string tension , giving .
REASONING PATH
Your ACEpath teacher’s suggested approach- Whole-system inertia rule
For coupled bodies moving with identical acceleration magnitude , .
Always verify whether your force sum includes internal tension. If tension has been eliminated, the mass on the right-hand side must be the sum of all accelerating bodies.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet the net driving force equal to total mass times acceleration:
Substitute the values:
Solve for linear acceleration:
Substitute into the equation of motion for :
,
03 The student swaps the trigonometric functions, using sine for the normal force and cosine for the parallel gravity component.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Because the incline angle is measured from the horizontal, the angle between the downward gravity vector and the surface normal is also . Therefore, the perpendicular component is , not .
- Step 2Correct
The component of gravity acting parallel to the incline is opposite the angle in the force triangle, so it requires , giving .
- Step 3Correct
Your system equation structure and algebraic execution are completely correct, but the calculated acceleration is numerical propagated error from the swapped force components in earlier steps.
- Step 4Correct
Your formula relating string tension to the acceleration of the falling mass is correct, but your final numerical value inherits the error from .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly formulated the whole-system equation of motion equating net driving force to total mass times acceleration.
You applied Newton's second law to the hanging mass to derive the string tension relation .
You maintained clean, consistent units and accurate algebraic arithmetic throughout your work.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou assigned sine to the perpendicular normal component and cosine to the parallel slope component.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the adjacent and opposite sides of the right triangle formed by the gravity vector on an incline inclined at an angle to the horizontal.
REASONING PATH
Your ACEpath teacher’s suggested approach- Incline Angle Reference Check
When an incline is angled at above the horizontal, the component of gravity perpendicular to the surface is , and the component along the surface is .
Always draw the right triangle formed by the vertical gravity vector and the incline axes: the angle between the vertical and the normal axis is .
- Extreme Angle Sanity Check
As the incline angle approaches zero (flat ground), the normal force must approach , and the slope-sliding component must approach zero.
Check that your chosen functions satisfy and .
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the normal force: .
Calculate the kinetic friction force: .
Calculate the downhill gravity component: .
Substitute into the system equation: .
Solve for linear acceleration: .
Solve for string tension: .
,
Lock it in
In which direction does kinetic friction always act on an object moving along an incline?
Directly opposite to the direction of the object's sliding motion along the surface.
Similar question
A block of mass is pulled up a frictionless incline by a constant tension force parallel to the ramp. What is the acceleration of the block? (Use )
Answer
Along the incline: .
A block slides up a incline with an initial velocity. The coefficient of kinetic friction is . Calculate the magnitude of the block's deceleration while moving upward. (Use )
Answer
Both gravity and friction oppose upward motion: . The deceleration magnitude is .
Two blocks are connected over a frictionless pulley: mass is on a incline with , connected to hanging mass that accelerates downward. Find the magnitude of acceleration of the system. (Use )
Answer
For : , , and . Equation of motion: .