Resources

A rectangular solid block of an unknown metal alloy has a uniform length of 0.150 m0.150\text{ m}, width of 0.0800 m0.0800\text{ m}, and height of 0.0400 m0.0400\text{ m}. When placed on a precision laboratory balance, the block is measured to have a mass of 3.96 kg3.96\text{ kg}. (a) Calculate the density ρ\rho of the alloy in kg/m3\text{kg/m}^3. (b) When the block rests flat on a horizontal table on its largest face (length ×\times width), determine the average contact pressure PP it exerts on the surface in Pascals (Pa\text{Pa}), using g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer and steps

Final answer

(a) ρ=8.25×103 kg/m3\rho = 8.25 \times 10^3\text{ kg/m}^3; (b) P=3.23×103 PaP = 3.23 \times 10^3\text{ Pa}

Steps

Part (a): Determining the Density of the Alloy

  1. Calculate the volume of the rectangular block: The volume VV of a rectangular cuboid is the product of its three dimensions: V=l⋅w⋅hV = l \cdot w \cdot h Substitute the given measurements: V=(0.150 m)⋅(0.0800 m)⋅(0.0400 m)=4.80×10−4 m3V = (0.150\text{ m}) \cdot (0.0800\text{ m}) \cdot (0.0400\text{ m}) = 4.80 \times 10^{-4}\text{ m}^3
  2. Calculate density: Density ρ\rho represents the mass per unit volume of a substance: ρ=mV\rho = \frac{m}{V} Substitute the mass m=3.96 kgm = 3.96\text{ kg} and the calculated volume: ρ=3.96 kg4.80×10−4 m3=8.25×103 kg/m3\rho = \frac{3.96\text{ kg}}{4.80 \times 10^{-4}\text{ m}^3} = 8.25 \times 10^3\text{ kg/m}^3

Part (b): Determining the Contact Pressure

  1. Determine the downward force (weight): The downward force exerted by the block on the flat table is its weight FF: F=m⋅gF = m \cdot g F=(3.96 kg)⋅(9.80 m/s2)=38.808 NF = (3.96\text{ kg}) \cdot (9.80\text{ m/s}^2) = 38.808\text{ N}
  2. Calculate the contact surface area: The block rests on its largest face, which is defined by its length and width: A=l⋅w=(0.150 m)⋅(0.0800 m)=0.0120 m2A = l \cdot w = (0.150\text{ m}) \cdot (0.0800\text{ m}) = 0.0120\text{ m}^2
  3. Calculate the pressure: Pressure PP is defined as the perpendicular force applied per unit area: P=FAP = \frac{F}{A} Substitute the values into the formula: P=38.808 N0.0120 m2=3234 PaP = \frac{38.808\text{ N}}{0.0120\text{ m}^2} = 3234\text{ Pa} Rounding to three significant figures gives: P=3.23×103 PaP = 3.23 \times 10^3\text{ Pa}

(Alternative method: For a uniform column of height hh, pressure can also be calculated directly as P=ρ⋅g⋅h=(8.25×103 kg/m3)⋅(9.80 m/s2)⋅(0.0400 m)=3.23×103 PaP = \rho \cdot g \cdot h = (8.25 \times 10^3\text{ kg/m}^3) \cdot (9.80\text{ m/s}^2) \cdot (0.0400\text{ m}) = 3.23 \times 10^3\text{ Pa}.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the gravitational force (weight) with the mass directly, omitting acceleration due to gravity g when calculating pressure.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    V=0.150×0.0800×0.0400=0.000480 m3V = 0.150 \times 0.0800 \times 0.0400 = 0.000480\text{ m}^3

  2. Step 2

    ρ=3.96/0.000480=8250 kg/m3\rho = 3.96 / 0.000480 = 8250\text{ kg/m}^3

  3. Step 3

    A=0.150×0.0800=0.0120 m2A = 0.150 \times 0.0800 = 0.0120\text{ m}^2

  4. Step 4

    P=mA=3.960.0120=330 PaP = \frac{m}{A} = \frac{3.96}{0.0120} = 330\text{ Pa}

    Correct

    P=FA=m⋅gA=(3.96 kg)(9.80 m/s2)0.0120 m2=3.23×103 PaP = \frac{F}{A} = \frac{m \cdot g}{A} = \frac{(3.96\text{ kg})(9.80\text{ m/s}^2)}{0.0120\text{ m}^2} = 3.23 \times 10^3\text{ Pa}

    Pressure is perpendicular force per unit area (P=FAP = \frac{F}{A}), not mass per unit area. On a horizontal surface, the downward force is the object's weight, F=mgF = mg.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the total volume of the rectangular block accurately.

You applied the density formula ρ=mV\rho = \frac{m}{V} with correct numerical values and units.

You selected the largest face to find the correct contact surface area.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Mass vs. Weight Confusion in Pressure

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated mass as the force acting on the surface instead of multiplying mass by gravitational acceleration to find weight.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish Mass from Weight
  • Mass (mm) is measured in kilograms (kg\text{kg}), whereas weight is a force (F=mgF = mg) measured in Newtons (N\text{N}).

  • Always convert mass to weight by multiplying by gg before using force in mechanical formulas.

Definition of Pressure
  • Pressure is normal force divided by area: P=FA=Nm2=PaP = \frac{F}{A} = \frac{\text{N}}{\text{m}^2} = \text{Pa}.

  • Check the units: kgm2\frac{\text{kg}}{\text{m}^2} is area density, whereas Nm2\frac{\text{N}}{\text{m}^2} gives Pascals (Pa\text{Pa}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the downward force exerted by the block: F=mg=(3.96 kg)(9.80 m/s2)=38.808 NF = mg = (3.96\text{ kg})(9.80\text{ m/s}^2) = 38.808\text{ N}.

  2. Divide this force by the contact area: P=FA=38.808 N0.0120 m2≈3234 PaP = \frac{F}{A} = \frac{38.808\text{ N}}{0.0120\text{ m}^2} \approx 3234\text{ Pa}.

Final answer

P=3.23×103 PaP = 3.23 \times 10^3\text{ Pa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between mass (scalar quantity of matter) and weight (downward gravitational force).

  • Check that units cancel to N/m2\text{N/m}^2 whenever you calculate pressure in Pascals.

OverviewACEpath Teacher's Diagnosis

02 The student misidentifies the contact surface by using the total surface area of the block instead of the area of the largest face resting on the table.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    V=0.150×0.0800×0.0400=0.000480 m3  ⟹  ρ=3.960.000480=8250 kg/m3V = 0.150 \times 0.0800 \times 0.0400 = 0.000480\text{ m}^3 \implies \rho = \frac{3.96}{0.000480} = 8250\text{ kg/m}^3

  2. Step 2

    F=3.96×9.80=38.808 NF = 3.96 \times 9.80 = 38.808\text{ N}

  3. Step 3

    A=2×(0.150×0.0800+0.150×0.0400+0.0800×0.0400)=0.0424 m2A = 2 \times (0.150 \times 0.0800 + 0.150 \times 0.0400 + 0.0800 \times 0.0400) = 0.0424\text{ m}^2

    Correct

    A=l⋅w=(0.150 m)(0.0800 m)=0.0120 m2A = l \cdot w = (0.150\text{ m})(0.0800\text{ m}) = 0.0120\text{ m}^2

    You calculated the total surface area of all six faces of the block, but pressure depends only on the single face in direct physical contact with the table.

  4. Step 4

    P=38.8080.0424=915.28 PaP = \frac{38.808}{0.0424} = 915.28\text{ Pa}

    Correct

    P=FA=38.808 N0.0120 m2=3.23×103 PaP = \frac{F}{A} = \frac{38.808\text{ N}}{0.0120\text{ m}^2} = 3.23 \times 10^3\text{ Pa}

    Your formula for pressure was applied consistently, but the numerical result is incorrect due to using the incorrect contact area from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the volume of the block using its three dimensions.

You correctly determined the density of the metal alloy.

You accurately found the weight of the block using F=mgF = mg.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Contact Area Misconception

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the total surface area of a 3D solid with the actual contact area across which the normal force is distributed.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identifying Contact Surface
  • Pressure is defined as P=FAP = \frac{F}{A}, where AA is strictly the surface area over which the normal force acts, not the total exterior area of the object.

  • Identify which specific face touches the supporting surface and compute only the area of that boundary face.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the resting face: The problem specifies the largest face, which has dimensions l=0.150 ml = 0.150\text{ m} and w=0.0800 mw = 0.0800\text{ m}.

  2. Calculate the contact area: A=(0.150 m)(0.0800 m)=0.0120 m2A = (0.150\text{ m})(0.0800\text{ m}) = 0.0120\text{ m}^2.

  3. Compute contact pressure: P=FA=38.808 N0.0120 m2=3234 Pa≈3.23×103 PaP = \frac{F}{A} = \frac{38.808\text{ N}}{0.0120\text{ m}^2} = 3234\text{ Pa} \approx 3.23 \times 10^3\text{ Pa}.

Final answer

(a) ρ=8.25×103 kg/m3\rho = 8.25 \times 10^3\text{ kg/m}^3; (b) P=3.23×103 PaP = 3.23 \times 10^3\text{ Pa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between total surface area and contact area in solid mechanics.

  • Practice sketching a free-body diagram showing the contact patch where the normal force acts.

OverviewACEpath Teacher's Diagnosis

03 The student multiplies density by mass instead of dividing mass by volume to find density.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    V=0.150×0.0800×0.0400=0.000480 m3V = 0.150 \times 0.0800 \times 0.0400 = 0.000480\text{ m}^3

  2. Step 2

    ρ=m×V=3.96×0.000480=0.00190 kg/m3\rho = m \times V = 3.96 \times 0.000480 = 0.00190\text{ kg/m}^3

    Correct

    ρ=mV=3.96 kg4.80×10−4 m3=8.25×103 kg/m3\rho = \frac{m}{V} = \frac{3.96\text{ kg}}{4.80 \times 10^{-4}\text{ m}^3} = 8.25 \times 10^3\text{ kg/m}^3

    Density is mass per unit volume (ρ=mV\rho = \frac{m}{V}), meaning mass must be divided by volume rather than multiplied by it.

  3. Step 3

    F=3.96×9.80=38.808 NF = 3.96 \times 9.80 = 38.808\text{ N}

  4. Step 4

    A=0.150×0.0800=0.0120 m2A = 0.150 \times 0.0800 = 0.0120\text{ m}^2

  5. Step 5

    P=38.808/0.0120=3234 PaP = 38.808 / 0.0120 = 3234\text{ Pa}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the volume of the block using its three dimensions.

You determined the downward gravitational force accurately.

You calculated the contact surface area and applied the pressure definition P=FAP = \frac{F}{A} flawlessly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula inversion/multiplication error in density definition

You wrote the formula for density as ρ=m×V\rho = m \times V instead of dividing mass by volume.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the algebraic relationship connecting mass, volume, and density (m=ρVm = \rho V versus ρ=mV\rho = \frac{m}{V}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the units of density
  • Density has SI units of kg/m3\text{kg}/\text{m}^3, which indicates mass divided by volume.

  • Always check whether multiplying or dividing your values gives the target unit kg/m3\text{kg}/\text{m}^3.

Rearrange the mass-density triangle
  • Mass is density times volume (m=ρ⋅Vm = \rho \cdot V), so solving for density yields ρ=mV\rho = \frac{m}{V}.

  • Isolate ρ\rho by dividing both sides of m=ρ⋅Vm = \rho \cdot V by VV.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the definition of density: ρ=mV\rho = \frac{m}{V}.

  2. Substitute m=3.96 kgm = 3.96\text{ kg} and V=4.80×10−4 m3V = 4.80 \times 10^{-4}\text{ m}^3.

  3. Evaluate ρ=3.960.000480=8250 kg/m3=8.25×103 kg/m3\rho = \frac{3.96}{0.000480} = 8250\text{ kg/m}^3 = 8.25 \times 10^3\text{ kg/m}^3.

Final answer

(a) ρ=8.25×103 kg/m3\rho = 8.25 \times 10^3\text{ kg/m}^3; (b) P=3.23×103 PaP = 3.23 \times 10^3\text{ Pa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the density formula using unit analysis: kg\text{kg} divided by m3\text{m}^3 gives kg/m3\text{kg/m}^3.

  • Practice rearranging the relationship m=ρVm = \rho V to solve for each of the three variables.

  • Round final results consistently to three significant figures (8.25×103 kg/m38.25 \times 10^3\text{ kg/m}^3 and 3.23×103 Pa3.23 \times 10^3\text{ Pa}).

Lock it in

Similar question

01

A solid cube of aluminum has edge length 0.10 m0.10\text{ m} and mass 2.70 kg2.70\text{ kg}. Calculate the contact pressure it exerts on a flat horizontal floor using g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

P=2.65×103 PaP = 2.65 \times 10^3\text{ Pa}. Key steps: Area A=(0.10 m)2=0.010 m2A = (0.10\text{ m})^2 = 0.010\text{ m}^2. Downward force F=mg=(2.70)(9.80)=26.46 NF = mg = (2.70)(9.80) = 26.46\text{ N}. Pressure P=26.46 N0.010 m2=2646 Pa≈2.65×103 PaP = \frac{26.46\text{ N}}{0.010\text{ m}^2} = 2646\text{ Pa} \approx 2.65 \times 10^3\text{ Pa}.

02

A cylindrical brass weight has radius r=0.0500 mr = 0.0500\text{ m}, height h=0.120 mh = 0.120\text{ m}, and density ρ=8.50×103 kg/m3\rho = 8.50 \times 10^3\text{ kg/m}^3. When placed upright on its circular base, determine the pressure it exerts on the surface using g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

P=1.00×104 PaP = 1.00 \times 10^4\text{ Pa}. Key steps: For a uniform column, P=mgA=ρAhgA=ρghP = \frac{mg}{A} = \frac{\rho A h g}{A} = \rho g h. Substituting: P=(8.50×103 kg/m3)(9.80 m/s2)(0.120 m)=9996 Pa≈1.00×104 PaP = (8.50 \times 10^3\text{ kg/m}^3)(9.80\text{ m/s}^2)(0.120\text{ m}) = 9996\text{ Pa} \approx 1.00 \times 10^4\text{ Pa}.

03

A crate of mass 120 kg120\text{ kg} rests on a horizontal platform. It has dimensions 1.20 m×0.800 m×0.500 m1.20\text{ m} \times 0.800\text{ m} \times 0.500\text{ m}. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, find: (a) the minimum pressure it can exert on the platform, and (b) the maximum pressure it can exert.

Answer

(a) Pmin⁡=1.23×103 PaP_{\min} = 1.23 \times 10^3\text{ Pa}; (b) Pmax⁡=2.94×103 PaP_{\max} = 2.94 \times 10^3\text{ Pa}. Key steps: Total weight F=mg=(120 kg)(9.80 m/s2)=1176 NF = mg = (120\text{ kg})(9.80\text{ m/s}^2) = 1176\text{ N}. Largest face area Amax⁡=1.20×0.800=0.960 m2  ⟹  Pmin⁡=11760.960=1225 PaA_{\max} = 1.20 \times 0.800 = 0.960\text{ m}^2 \implies P_{\min} = \frac{1176}{0.960} = 1225\text{ Pa}. Smallest face area Amin⁡=0.800×0.500=0.400 m2  ⟹  Pmax⁡=11760.400=2940 PaA_{\min} = 0.800 \times 0.500 = 0.400\text{ m}^2 \implies P_{\max} = \frac{1176}{0.400} = 2940\text{ Pa}.

Loading workspace…