Resources

A motor-driven conveyor raises gravel along a ramp inclined at an angle θ\theta above the horizontal at a constant speed of v=1.40 m/sv = 1.40\text{ m/s}. The conveyor moves gravel at a constant mass flow rate of ΔmΔt=45.0 kg/s\frac{\Delta m}{\Delta t} = 45.0\text{ kg/s}. The electric drive unit delivers a total mechanical input power of Pin=4.20 kWP_{\text{in}} = 4.20\text{ kW}, and the mechanical efficiency of the conveyor system is η=68.0%\eta = 68.0\%. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, determine the inclination angle θ\theta of the ramp in degrees.

Answer and steps

Final answer

θ=27.5∘\theta = 27.5^\circ

Steps

01

Relate Useful Output Power to Input Power and Efficiency

Mechanical efficiency η\eta is defined as the ratio of useful mechanical output power PoutP_{\text{out}} to the mechanical input power PinP_{\text{in}} delivered to the system:

η=PoutPin\eta = \frac{P_{\text{out}}}{P_{\text{in}}}

Rearranging for the useful output power gives:

Pout=ηPinP_{\text{out}} = \eta P_{\text{in}}

Given Pin=4.20 kW=4200 WP_{\text{in}} = 4.20\text{ kW} = 4200\text{ W} and η=68.0%=0.680\eta = 68.0\% = 0.680:

Pout=0.680⋅4200 W=2856 WP_{\text{out}} = 0.680 \cdot 4200\text{ W} = 2856\text{ W}


02

Express Useful Power in Terms of Gravitational Potential Energy

The useful work performed by the conveyor is the continuous lifting of gravel against gravity at a constant speed. In a time interval Δt\Delta t, a mass of gravel Δm\Delta m is transported a distance Δs=vΔt\Delta s = v \Delta t along the incline.

The corresponding vertical elevation gain Δh\Delta h is:

Δh=Δssin⁡θ=vΔtsin⁡θ\Delta h = \Delta s \sin\theta = v \Delta t \sin\theta

The rate of increase of gravitational potential energy represents the useful power:

Pout=ΔUΔt=Δm⋅gΔhΔt=(ΔmΔt)gvsin⁡θP_{\text{out}} = \frac{\Delta U}{\Delta t} = \frac{\Delta m \cdot g \Delta h}{\Delta t} = \left(\frac{\Delta m}{\Delta t}\right) g v \sin\theta


03

Solve for the Incline Angle θ\theta

Equating the expression for useful power to the power delivered by the drive unit:

(ΔmΔt)gvsin⁡θ=ηPin\left(\frac{\Delta m}{\Delta t}\right) g v \sin\theta = \eta P_{\text{in}}

Solving for sin⁡θ\sin\theta:

sin⁡θ=ηPin(ΔmΔt)gv\sin\theta = \frac{\eta P_{\text{in}}}{\left(\frac{\Delta m}{\Delta t}\right) g v}

Substituting the system values:

sin⁡θ=2856 W6174 W≈0.4626\sin\theta = \frac{2856\text{ W}}{6174\text{ W}} \approx 0.4626

Taking the inverse sine:

θ=arcsin⁡(0.4626)≈27.5∘\theta = \arcsin(0.4626) \approx 27.5^\circ


Key Pitfall to Avoid

When calculating power along an incline, only the vertical component of velocity vy=vsin⁡θv_y = v\sin\theta does work against gravity. Using the total speed vv instead of vsin⁡θv\sin\theta directly in the potential energy rate formula omits the geometric dependence on the inclination angle θ\theta.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student assumes 100% efficiency and equates the rate of potential energy gain directly to the total mechanical input power, neglecting η.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Pout=Pin=4200 WP_{\text{out}} = P_{\text{in}} = 4200\text{ W}

    Correct

    Pout=ηPin=0.680×4200 W=2856 WP_{\text{out}} = \eta P_{\text{in}} = 0.680 \times 4200\text{ W} = 2856\text{ W}

    Because the conveyor system has an efficiency of η=68.0%\eta = 68.0\%, the useful output power available to lift the gravel is only a fraction of the total input power delivered by the motor.

  2. Step 2

    Pout=(dmdt)×g×v×sin⁡(θ)P_{\text{out}} = \left(\frac{dm}{dt}\right) \times g \times v \times \sin(\theta)

  3. Step 3

    sin⁡(θ)=42006174=0.6803\sin(\theta) = \frac{4200}{6174} = 0.6803

    Correct

    sin⁡θ=28566174≈0.4626\sin\theta = \frac{2856}{6174} \approx 0.4626

    Your algebraic rearrangement was set up correctly, but substituting the unreduced input power (4200 W4200\text{ W}) instead of the useful output power (2856 W2856\text{ W}) propagated the earlier error into sin⁡θ\sin\theta.

  4. Step 4

    θ=arcsin⁡(0.6803)=42.9∘\theta = \arcsin(0.6803) = 42.9^\circ

    Correct

    θ=arcsin⁡(0.4626)≈27.5∘\theta = \arcsin(0.4626) \approx 27.5^\circ

    Your inverse sine evaluation was computed properly from your previous value, but the angle is incorrect due to the propagated power error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly expressed the rate of potential energy gain as (ΔmΔt)gvsin⁡θ\left(\frac{\Delta m}{\Delta t}\right) g v \sin\theta.

You properly isolated the unknown angle θ\theta using the inverse sine function.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Neglecting mechanical efficiency

You set useful output power equal to total electrical input power, leaving out the efficiency factor η\eta.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing mechanical input power (PinP_{\text{in}}) delivered to a machine with useful mechanical output power (PoutP_{\text{out}}) delivered to the payload when η<1\eta < 1.

REASONING PATH
Your ACEpath teacher’s suggested approach
Energy and Power Accounting
  • For any real machine with losses, Pout=ηPinP_{\text{out}} = \eta P_{\text{in}}, where η<1\eta < 1.

  • Identify whether the power given in the problem statement is delivered to the motor (PinP_{\text{in}}) or performed by the machine on the object (PoutP_{\text{out}}), then multiply or divide by η\eta accordingly.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the useful output power: Pout=ηPin=0.680×4200 W=2856 WP_{\text{out}} = \eta P_{\text{in}} = 0.680 \times 4200\text{ W} = 2856\text{ W}.

  2. Equate PoutP_{\text{out}} to the lifting power: 2856 W=6174 W⋅sin⁡θ2856\text{ W} = 6174\text{ W} \cdot \sin\theta.

  3. Solve for the sine of the angle: sin⁡θ=28566174≈0.4626\sin\theta = \frac{2856}{6174} \approx 0.4626.

  4. Compute the ramp inclination angle: θ=arcsin⁡(0.4626)≈27.5∘\theta = \arcsin(0.4626) \approx 27.5^\circ.

Final answer

θ=27.5∘\theta = 27.5^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between input power, useful output power, and internal power losses.

  • Practice conveyor and winch problems involving efficiency to ensure η\eta is applied before setting up mechanical work equations.

OverviewACEpath Teacher's Diagnosis

02 The student uses the cosine of the inclination angle instead of the sine, incorrectly resolving the velocity vector along the horizontal rather than the vertical direction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Pout=η⋅Pin=0.680⋅4200=2856 WP_{\text{out}} = \eta \cdot P_{\text{in}} = 0.680 \cdot 4200 = 2856\text{ W}

  2. Step 2

    Pout=(dmdt)⋅g⋅v⋅cos⁡(θ)P_{\text{out}} = \left(\frac{dm}{dt}\right) \cdot g \cdot v \cdot \cos(\theta)

    Correct

    Pout=(dmdt)gvsin⁡θP_{\text{out}} = \left(\frac{dm}{dt}\right) g v \sin\theta

    Work is done against gravity only in the vertical direction. Because the vertical velocity component is vy=vsin⁡θv_y = v\sin\theta, the rate of gravitational potential energy gain depends on sin⁡θ\sin\theta, not cos⁡θ\cos\theta.

  3. Step 3

    cos⁡(θ)=28566174=0.4626\cos(\theta) = \frac{2856}{6174} = 0.4626

    Correct

    sin⁡θ=28566174≈0.4626\sin\theta = \frac{2856}{6174} \approx 0.4626

    Your numerical evaluation of the ratio is correct, but it gives sin⁡θ\sin\theta rather than cos⁡θ\cos\theta.

  4. Step 4

    θ=arccos⁡(0.4626)=62.4∘\theta = \arccos(0.4626) = 62.4^\circ

    Correct

    θ=arcsin⁡(0.4626)≈27.5∘\theta = \arcsin(0.4626) \approx 27.5^\circ

    Taking the inverse sine of 0.46260.4626 gives the correct angle of inclination.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used mechanical efficiency to relate electrical input power to mechanical output power.

You accurately computed the total product (dmdt)gv=6174 W\left(\frac{dm}{dt}\right) g v = 6174\text{ W}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Component Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You selected the horizontal component of motion (vcos⁡θv\cos\theta) instead of the vertical component (vsin⁡θv\sin\theta) when expressing the continuous change in gravitational potential energy.

REASONING PATH
Your ACEpath teacher’s suggested approach
Gravitational Work Direction
  • Gravity acts straight down, so only vertical displacement contributes to ΔU=mgΔh\Delta U = mg\Delta h.

  • Always resolve the velocity along the vertical axis (vy=vsin⁡θv_y = v\sin\theta) when calculating the rate of gravitational potential energy gain.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express useful power in terms of vertical velocity: Pout=(dmdt)gvsin⁡θP_{\text{out}} = \left(\frac{dm}{dt}\right) g v \sin\theta

  2. Solve for the sine of the angle: sin⁡θ=Pout(dmdt)gv=28566174≈0.4626\sin\theta = \frac{P_{\text{out}}}{\left(\frac{dm}{dt}\right) g v} = \frac{2856}{6174} \approx 0.4626

  3. Evaluate the inverse sine: θ=arcsin⁡(0.4626)≈27.5∘\theta = \arcsin(0.4626) \approx 27.5^\circ

Final answer

θ≈27.5∘\theta \approx 27.5^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a right triangle for inclined motion to clearly distinguish vertical elevation gain Δh=Δssin⁡θ\Delta h = \Delta s \sin\theta from horizontal run Δx=Δscos⁡θ\Delta x = \Delta s \cos\theta.

  • Practice checking whether an extreme case makes physical sense: at θ=0∘\theta = 0^\circ (flat ground), vertical lifting power should be zero, which matches sin⁡(0∘)=0\sin(0^\circ) = 0.

OverviewACEpath Teacher's Diagnosis

03 The student uses the tangent of the inclination angle instead of the sine, mistakenly treating the conveyor speed along the incline as a horizontal velocity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Pout=η⋅Pin=0.680⋅4200=2856 WP_{\text{out}} = \eta \cdot P_{\text{in}} = 0.680 \cdot 4200 = 2856\text{ W}

  2. Step 2

    Pout=dmdt⋅g⋅v⋅tan⁡(θ)P_{\text{out}} = \frac{dm}{dt} \cdot g \cdot v \cdot \tan(\theta)

    Correct

    Pout=(ΔmΔt)gvsin⁡θP_{\text{out}} = \left(\frac{\Delta m}{\Delta t}\right) g v \sin\theta

    Because the conveyor moves the gravel at speed vv along the ramp (the hypotenuse), the rate of vertical elevation gain is vy=vsin⁡θv_y = v \sin\theta, not vtan⁡θv \tan\theta.

  3. Step 3

    tan⁡(θ)=28566174=0.4626\tan(\theta) = \frac{2856}{6174} = 0.4626

    Correct

    sin⁡θ=28566174≈0.4626\sin\theta = \frac{2856}{6174} \approx 0.4626

    Your algebraic isolation and arithmetic were carried out correctly, but the equation inherits the incorrect trigonometric function from the previous step.

  4. Step 4

    θ=arctan⁡(0.4626)=24.8∘\theta = \arctan(0.4626) = 24.8^\circ

    Correct

    θ=arcsin⁡(0.4626)≈27.5∘\theta = \arcsin(0.4626) \approx 27.5^\circ

    Your final calculation followed consistently from your tangent equation, but taking the inverse sine gives the correct inclination angle.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the efficiency formula to compute the useful power output.

You correctly evaluated the product of mass flow rate, gravitational acceleration, and speed.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric resolution error

You used the tangent ratio instead of the sine ratio when resolving the conveyor velocity vertically.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing motion along the incline (the hypotenuse) with horizontal motion. Since vv is directed along the ramp, the vertical velocity component doing work against gravity is vy=vsin⁡θv_y = v \sin\theta.

REASONING PATH
Your ACEpath teacher’s suggested approach
Velocity Direction on an Incline
  • If speed vv is along an incline of angle θ\theta, vertical speed is vy=vsin⁡θv_y = v\sin\theta and horizontal speed is vx=vcos⁡θv_x = v\cos\theta.

  • Always draw a right triangle with the displacement or velocity along the ramp as the hypotenuse before setting up the power equation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set Pout=(ΔmΔt)gvsin⁡θP_{\text{out}} = \left(\frac{\Delta m}{\Delta t}\right) g v \sin\theta.

  2. Solve for the sine: sin⁡θ=2856 W(45.0 kg/s)(9.80 m/s2)(1.40 m/s)=28566174≈0.4626\sin\theta = \frac{2856\text{ W}}{(45.0\text{ kg/s})(9.80\text{ m/s}^2)(1.40\text{ m/s})} = \frac{2856}{6174} \approx 0.4626.

  3. Take the inverse sine: θ=arcsin⁡(0.4626)≈27.5∘\theta = \arcsin(0.4626) \approx 27.5^\circ.

Final answer

θ=27.5∘\theta = 27.5^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice identifying whether a given velocity represents the hypotenuse or an adjacent side in incline problems.

  • Review how gravitational potential energy depends strictly on vertical displacement Δh=Δssin⁡θ\Delta h = \Delta s \sin\theta.

Lock it in

Similar question

01

A vertical bucket elevator lifts grain at a constant rate of 20.0 kg/s20.0\text{ kg/s} to a silo top at a speed of 2.50 m/s2.50\text{ m/s}. If the motor provides an input power of 800 W800\text{ W}, determine the mechanical efficiency η\eta of the elevator. (Use g=9.80 m/s2g = 9.80\text{ m/s}^2.)

Answer

η=61.3%\eta = 61.3\%. Key steps: Useful power is Pout=(ΔmΔt)gv=(20.0)(9.80)(2.50)=490 WP_{\text{out}} = \left(\frac{\Delta m}{\Delta t}\right) g v = (20.0)(9.80)(2.50) = 490\text{ W}. Then η=PoutPin=490 W800 W=0.6125≈61.3%\eta = \frac{P_{\text{out}}}{P_{\text{in}}} = \frac{490\text{ W}}{800\text{ W}} = 0.6125 \approx 61.3\%.

02

A conveyor belt inclined at 30.0∘30.0^\circ carries sand at a rate of 30.0 kg/s30.0\text{ kg/s} at a constant speed of 2.00 m/s2.00\text{ m/s}. The conveyor drive has an efficiency of 75.0%75.0\%. Calculate the required electrical input power PinP_{\text{in}} supplied to the drive motor in kilowatts. (Use g=9.80 m/s2g = 9.80\text{ m/s}^2.)

Answer

Pin=3.92 kWP_{\text{in}} = 3.92\text{ kW}. Key steps: Pout=(ΔmΔt)gvsin⁡θ=(30.0)(9.80)(2.00)sin⁡(30.0∘)=294 W×10=2940 W=2.94 kWP_{\text{out}} = \left(\frac{\Delta m}{\Delta t}\right) g v \sin\theta = (30.0)(9.80)(2.00)\sin(30.0^\circ) = 294\text{ W} \times 10 = 2940\text{ W} = 2.94\text{ kW}. Then Pin=Poutη=2.94 kW0.750=3.92 kWP_{\text{in}} = \frac{P_{\text{out}}}{\eta} = \frac{2.94\text{ kW}}{0.750} = 3.92\text{ kW}.

03

An inclined conveyor raises boxes along a ramp of angle θ=20.0∘\theta = 20.0^\circ at a constant speed v=1.20 m/sv = 1.20\text{ m/s}. The electric motor draws 3.50 kW3.50\text{ kW} of electrical power, and the system efficiency is 70.0%70.0\%. If friction along the belt absorbs an extra 400 W400\text{ W} of the mechanical output, leaving the rest for gravitational lifting, determine the maximum mass flow rate ΔmΔt\frac{\Delta m}{\Delta t} in kg/s\text{kg/s}. (Use g=9.80 m/s2g = 9.80\text{ m/s}^2.)

Answer

ΔmΔt=51.0 kg/s\frac{\Delta m}{\Delta t} = 51.0\text{ kg/s}. Key steps: Total mechanical output power is Pmech=ηPin=0.700×3500 W=2450 WP_{\text{mech}} = \eta P_{\text{in}} = 0.700 \times 3500\text{ W} = 2450\text{ W}. Power available for lifting is Plift=2450−400=2050 WP_{\text{lift}} = 2450 - 400 = 2050\text{ W}. Equating Plift=(ΔmΔt)gvsin⁡θP_{\text{lift}} = \left(\frac{\Delta m}{\Delta t}\right) g v \sin\theta gives ΔmΔt=2050(9.80)(1.20)sin⁡(20.0∘)≈20504.022≈51.0 kg/s\frac{\Delta m}{\Delta t} = \frac{2050}{(9.80)(1.20)\sin(20.0^\circ)} \approx \frac{2050}{4.022} \approx 51.0\text{ kg/s}.

Loading workspace…