Resources

A high-speed maglev test vehicle moves along a straight horizontal track with a constant velocity of v=85.0 m/sv = 85.0\text{ m/s}. During the run, the vehicle passes two optical timing gates: the first is located at x1=120 mx_1 = 120\text{ m} and the second at x2=1820 mx_2 = 1820\text{ m}. Calculate the elapsed time interval Δt\Delta t required for the vehicle to travel between these two gates, and determine the ratio of the distance traversed between the gates to the distance remaining if the full track terminates at xend=3520 mx_{\text{end}} = 3520\text{ m}.

Answer and steps

Final answer

Δt=20.0 s\Delta t = 20.0\text{ s}; distance ratio =1.00= 1.00 (or 1:11 : 1).

Steps

01

Identify the Given Quantities

From the problem statement, the vehicle moves in uniform (constant-velocity) linear motion along the xx-axis:

  • Velocity: v=85.0 m/sv = 85.0\text{ m/s}
  • Position of the first timing gate: x1=120 mx_1 = 120\text{ m}
  • Position of the second timing gate: x2=1820 mx_2 = 1820\text{ m}
  • Position of track termination: xend=3520 mx_{\text{end}} = 3520\text{ m}

02

Determine the Distance Between the Gates

The displacement (or distance traversed) between Gate 1 and Gate 2 is: Δxgates=x2−x1\Delta x_{\text{gates}} = x_2 - x_1

Substitute the numerical values: Δxgates=1820 m−120 m=1700 m\Delta x_{\text{gates}} = 1820\text{ m} - 120\text{ m} = 1700\text{ m}


03

Calculate the Elapsed Time Δt\Delta t

For motion at constant velocity, position changes uniformly with time: v=ΔxgatesΔtv = \frac{\Delta x_{\text{gates}}}{\Delta t}

Rearranging to solve for the time interval Δt\Delta t: Δt=Δxgatesv=1700 m85.0 m/s=20.0 s\Delta t = \frac{\Delta x_{\text{gates}}}{v} = \frac{1700\text{ m}}{85.0\text{ m/s}} = 20.0\text{ s}


04

Determine the Remaining Distance and the Distance Ratio

The remaining distance from the second gate to the end of the track is: Δxremaining=xend−x2\Delta x_{\text{remaining}} = x_{\text{end}} - x_2 Δxremaining=3520 m−1820 m=1700 m\Delta x_{\text{remaining}} = 3520\text{ m} - 1820\text{ m} = 1700\text{ m}

Now, compute the ratio of the distance traversed between the gates to the distance remaining: Ratio=ΔxgatesΔxremaining=1700 m1700 m=1.00(or 1:1)\text{Ratio} = \frac{\Delta x_{\text{gates}}}{\Delta x_{\text{remaining}}} = \frac{1700\text{ m}}{1700\text{ m}} = 1.00 \quad (\text{or } 1 : 1)

Common Pitfall: When calculating elapsed time or segment distances, ensure you subtract the initial position of the segment (x1x_1) rather than dividing the absolute coordinate (x2x_2) directly by the velocity. Coordinate values represent positions relative to the origin, whereas travel time depends solely on the displacement segment Δx=x2−x1\Delta x = x_2 - x_1.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the elapsed time by dividing the position of the second gate by velocity, ignoring the initial position offset.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δt=x2v  ⟹  Δt=182085.0=21.4 s\Delta t = \frac{x_2}{v} \implies \Delta t = \frac{1820}{85.0} = 21.4\text{ s}

    Correct

    Δt=x2−x1v=1820 m−120 m85.0 m/s=20.0 s\Delta t = \frac{x_2 - x_1}{v} = \frac{1820\text{ m} - 120\text{ m}}{85.0\text{ m/s}} = 20.0\text{ s}

    You divided the coordinate x2x_2 by velocity instead of using the displacement Δx=x2−x1\Delta x = x_2 - x_1 between Gate 1 and Gate 2.

  2. Step 2

    dbetween=1820 m−120 m=1700 m  ⟹  dremaining=3520 m−1820 m=1700 md_{\text{between}} = 1820\text{ m} - 120\text{ m} = 1700\text{ m} \implies d_{\text{remaining}} = 3520\text{ m} - 1820\text{ m} = 1700\text{ m}

  3. Step 3

    Ratio=17001700=1\text{Ratio} = \frac{1700}{1700} = 1

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly subtracted the position coordinates to find the distance between the gates and the remaining track distance.

You accurately calculated the ratio between the two distance segments.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflating Coordinate Position with Displacement Interval

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the coordinate position of the second gate (x2=1820 mx_2 = 1820\text{ m}) as the distance traveled, overlooking that the timing interval began at x1=120 mx_1 = 120\text{ m} rather than at the origin (x=0x = 0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Position vs. Displacement
  • A coordinate xx is a position relative to the origin, whereas displacement is the change in position: Δx=xfinal−xinitial\Delta x = x_{\text{final}} - x_{\text{initial}}.

  • Always compute Δx=x2−x1\Delta x = x_2 - x_1 before using Δt=Δxv\Delta t = \frac{\Delta x}{v}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the displacement between the gates: Δx=1820 m−120 m=1700 m\Delta x = 1820\text{ m} - 120\text{ m} = 1700\text{ m}.

  2. Divide the displacement by the constant velocity: Δt=1700 m85.0 m/s=20.0 s\Delta t = \frac{1700\text{ m}}{85.0\text{ m/s}} = 20.0\text{ s}.

Final answer

Δt=20.0 s\Delta t = 20.0\text{ s}; distance ratio =1.00= 1.00 (or 1:11 : 1)

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down Δx=xfinal−xinitial\Delta x = x_{\text{final}} - x_{\text{initial}} explicitly before applying Δt=Δxv\Delta t = \frac{\Delta x}{v}.

  • Notice that you already found dbetween=1700 md_{\text{between}} = 1700\text{ m} in your second line of work; reuse that calculated segment distance to find Δt\Delta t.

OverviewACEpath Teacher's Diagnosis

02 The student computes the remaining distance relative to the starting gate instead of from the second gate.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δx=1820 m−120 m=1700 m  ⟹  Δt=170085.0=20.0 s\Delta x = 1820\text{ m} - 120\text{ m} = 1700\text{ m} \implies \Delta t = \frac{1700}{85.0} = 20.0\text{ s}

  2. Step 2

    dbetween=1700 m  ⟹  dremaining=3520 m−120 m=3400 md_{\text{between}} = 1700\text{ m} \implies d_{\text{remaining}} = 3520\text{ m} - 120\text{ m} = 3400\text{ m}

    Correct

    dremaining=xend−x2=3520 m−1820 m=1700 md_{\text{remaining}} = x_{\text{end}} - x_2 = 3520\text{ m} - 1820\text{ m} = 1700\text{ m}

    You calculated the distance remaining from the first gate (x1=120 mx_1 = 120\text{ m}) instead of measuring from the vehicle's position at the second gate (x2=1820 mx_2 = 1820\text{ m}).

  3. Step 3

    Ratio=17003400=0.5\text{Ratio} = \frac{1700}{3400} = 0.5

    Correct

    Ratio=dbetweendremaining=1700 m1700 m=1.00\text{Ratio} = \frac{d_{\text{between}}}{d_{\text{remaining}}} = \frac{1700\text{ m}}{1700\text{ m}} = 1.00

    Your ratio calculation correctly followed your values, but it inherited the error from the incorrect remaining distance.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the segment displacement between the two gates as Δx=1700 m\Delta x = 1700\text{ m}.

You properly applied uniform linear motion kinematics to obtain the travel time Δt=20.0 s\Delta t = 20.0\text{ s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect reference point for remaining distance

You subtracted the coordinate of Gate 1 (120 m120\text{ m}) instead of Gate 2 (1820 m1820\text{ m}) when computing the remaining track segment.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the initial reference point of the entire journey with the vehicle's current position at the end of the observed timing interval.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define segment endpoints explicitly
  • For any segment from position xAx_A to xBx_B, the length is Δx=xB−xA\Delta x = x_B - x_A.

  • Label the start and end coordinates of every segment before performing subtraction.

Verify 'remaining' context
  • Remaining distance always measures from the vehicle's latest checkpoint to the destination.

  • Ask yourself: 'Where is the vehicle right now?' Use that current location coordinate as the start of the remaining distance.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the vehicle's position after passing the gates: x2=1820 mx_2 = 1820\text{ m}.

  2. Compute the remaining distance to track termination: dremaining=xend−x2=3520 m−1820 m=1700 md_{\text{remaining}} = x_{\text{end}} - x_2 = 3520\text{ m} - 1820\text{ m} = 1700\text{ m}.

  3. Compute the ratio: Ratio=dbetweendremaining=1700 m1700 m=1.00\text{Ratio} = \frac{d_{\text{between}}}{d_{\text{remaining}}} = \frac{1700\text{ m}}{1700\text{ m}} = 1.00 (or 1:11 : 1).

Final answer

Δt=20.0 s\Delta t = 20.0\text{ s}; distance ratio =1.00= 1.00 (or 1:11 : 1)

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a 1D position line and clearly mark x1x_1, x2x_2, and xendx_{\text{end}} with brackets showing each segment.

  • Practice identifying the initial and final position of remaining segments in multi-stage kinematics problems.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the requested ratio by dividing the remaining distance by the distance traversed between the gates.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δx=1820 m−120 m=1700 m  ⟹  Δt=170085.0=20.0 s\Delta x = 1820\text{ m} - 120\text{ m} = 1700\text{ m} \implies \Delta t = \frac{1700}{85.0} = 20.0\text{ s}

  2. Step 2

    dbetween=1820−120=1700 m  ⟹  dremaining=3520−1820=1700 md_{\text{between}} = 1820 - 120 = 1700\text{ m} \implies d_{\text{remaining}} = 3520 - 1820 = 1700\text{ m}

  3. Step 3

    Ratio\text{Ratio} = dremainingdbetween\frac{d_{\text{remaining}}}{d_{\text{between}}}   ⟹  \implies Ratio\text{Ratio} = 17001700\frac{1700}{1700} = 1

    Correct

    Ratio\text{Ratio} = dbetweendremaining\frac{d_{\text{between}}}{d_{\text{remaining}}} = 1700 m1700 m\frac{1700\text{ m}}{1700\text{ m}} = 1.00

    The problem asks for the ratio of the distance traversed between the gates to the distance remaining, which translates to dbetweendremaining\frac{d_{\text{between}}}{d_{\text{remaining}}}. You crossed out the correct setup and wrote dremainingdbetween\frac{d_{\text{remaining}}}{d_{\text{between}}}. Although the numerical value is 11 because both lengths happen to be equal, your written formula inverts the ratio.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the displacement between the two gates using coordinate differences.

You applied the constant-velocity relation accurately to find the travel time.

You determined the remaining distance from Gate 2 to the end of the track correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted ratio definition

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Misinterpreting the phrasing 'ratio of A to B' as B/A rather than A/B, leading you to cross out the correct fraction setup and invert the numerator and denominator.

REASONING PATH
Your ACEpath teacher’s suggested approach
Translating 'Ratio of A to B'
  • In mathematics and physics, the verbal phrase 'the ratio of AA to BB' uniquely means AB\frac{A}{B} (or A:BA : B), where AA is the antecedent (numerator) and BB is the consequent (denominator).

  • Always write the quantity mentioned before 'to' in the numerator and the quantity mentioned after 'to' in the denominator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the ratio definition directly from the problem statement: Ratio=dbetweendremaining\text{Ratio} = \frac{d_{\text{between}}}{d_{\text{remaining}}}.

  2. Substitute the values: Ratio=1700 m1700 m=1.00\text{Ratio} = \frac{1700\text{ m}}{1700\text{ m}} = 1.00 (or 1:11 : 1).

Final answer

Δt=20.0 s\Delta t = 20.0\text{ s}; distance ratio =1.00= 1.00 (or 1:11 : 1)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review word-problem phrasing for ratios to ensure the first quantity named is always placed in the numerator.

  • Double-check your crossed-out work before committing to an inversion, especially when both values are identical.

Lock it in

Similar question

01

A runner sprints along a straight path at a steady speed of 8.0 m/s8.0\text{ m/s}. She passes a landmark at x1=40 mx_1 = 40\text{ m} and reaches a finish tape at x2=200 mx_2 = 200\text{ m}. How many seconds elapsed between passing the landmark and crossing the finish tape?

Answer

20 s20\text{ s}. The displacement is Δx=x2−x1=200 m−40 m=160 m\Delta x = x_2 - x_1 = 200\text{ m} - 40\text{ m} = 160\text{ m}. The elapsed time is Δt=Δxv=160 m8.0 m/s=20 s\Delta t = \frac{\Delta x}{v} = \frac{160\text{ m}}{8.0\text{ m/s}} = 20\text{ s}.

02

An automated shuttle moves at a constant velocity of 12 m/s12\text{ m/s} on a track running from x=0x = 0 to xend=600 mx_{\text{end}} = 600\text{ m}. Station A is at xA=120 mx_A = 120\text{ m} and Station B is at xB=360 mx_B = 360\text{ m}. Find (a) the time Δt\Delta t taken to travel from Station A to Station B, and (b) the ratio of the distance from Station A to Station B to the distance from Station B to the end of the track.

Answer

(a) Δt=20 s\Delta t = 20\text{ s}; (b) Ratio =1.00= 1.00 (or 1:11 : 1). Distance from A to B is ΔxAB=360−120=240 m\Delta x_{AB} = 360 - 120 = 240\text{ m}, so Δt=240 m12 m/s=20 s\Delta t = \frac{240\text{ m}}{12\text{ m/s}} = 20\text{ s}. Distance remaining is Δxrem=600−360=240 m\Delta x_{\text{rem}} = 600 - 360 = 240\text{ m}. The ratio is 240240=1.00\frac{240}{240} = 1.00.

03

A test car travels along a test strip at a constant speed vv. It passes Sensor 1 at x1=250 mx_1 = 250\text{ m} and Sensor 2 at x2=1450 mx_2 = 1450\text{ m} in an elapsed time of 15.0 s15.0\text{ s}. The track terminates at xend=2250 mx_{\text{end}} = 2250\text{ m}. Determine the vehicle's speed vv and the additional time required to travel from Sensor 2 to the end of the track.

Answer

v=80.0 m/sv = 80.0\text{ m/s}; additional time =10.0 s= 10.0\text{ s}. The displacement between sensors is Δx12=1450 m−250 m=1200 m\Delta x_{12} = 1450\text{ m} - 250\text{ m} = 1200\text{ m}, giving v=1200 m15.0 s=80.0 m/sv = \frac{1200\text{ m}}{15.0\text{ s}} = 80.0\text{ m/s}. The remaining displacement is Δxend=2250 m−1450 m=800 m\Delta x_{\text{end}} = 2250\text{ m} - 1450\text{ m} = 800\text{ m}, so the time is Δtrem=800 m80.0 m/s=10.0 s\Delta t_{\text{rem}} = \frac{800\text{ m}}{80.0\text{ m/s}} = 10.0\text{ s}.

Loading workspace…