Resources

A high-speed rail locomotive accelerates a passenger coach whose tare mass is m=4.25×104 kgm = 4.25 \times 10^4\text{ kg}. The train increases its speed from v1=72.0 km/hv_1 = 72.0\text{ km/h} to v2=162.0 km/hv_2 = 162.0\text{ km/h} along a straight, horizontal track over a time span of Δt=45.0 s\Delta t = 45.0\text{ s} under constant acceleration. Simultaneously, aerodynamic drag and mechanical rolling resistance exert an opposing resistive force of fresist=14.8 kNf_{\text{resist}} = 14.8\text{ kN}. Calculate: (a) the acceleration of the coach in m/s2\text{m/s}^2, and (b) the total forward driving force FdriveF_{\text{drive}} in kilonewtons (kN\text{kN}) exerted by the coupler hitch on the coach.

Answer and steps

Final answer

(a) a=0.556 m/s2a = 0.556\text{ m/s}^2; (b) Fdrive=38.4 kNF_{\text{drive}} = 38.4\text{ kN}

Steps

Part (a): Determine the Acceleration

  1. Convert the velocities into standard SI units (m/s\text{m/s}): Divide the speed values given in kilometers per hour by 3.63.6: v1=72.0 km/h3.6=20.0 m/sv_1 = \frac{72.0\text{ km/h}}{3.6} = 20.0\text{ m/s} v2=162.0 km/h3.6=45.0 m/sv_2 = \frac{162.0\text{ km/h}}{3.6} = 45.0\text{ m/s}
  2. Apply the definition of uniform linear acceleration: a=ΔvΔt=v2−v1Δta = \frac{\Delta v}{\Delta t} = \frac{v_2 - v_1}{\Delta t}

    Substitute the numerical values: a=45.0 m/s−20.0 m/s45.0 s=25.0 m/s45.0 s=59 m/s2≈0.556 m/s2a = \frac{45.0\text{ m/s} - 20.0\text{ m/s}}{45.0\text{ s}} = \frac{25.0\text{ m/s}}{45.0\text{ s}} = \frac{5}{9}\text{ m/s}^2 \approx 0.556\text{ m/s}^2


Part (b): Calculate the Forward Driving Force

  1. Set up Newton's second law along the horizontal direction: The passenger coach experiences two opposing horizontal forces:

    • A forward driving pull from the coupler hitch, FdriveF_{\text{drive}}
    • A backward resistive force (drag and friction), fresistf_{\text{resist}}

    The net force acting horizontally on the coach is: Fnet=Fdrive−fresistF_{\text{net}} = F_{\text{drive}} - f_{\text{resist}}

    By Newton's second law: Fnet=m⋅aF_{\text{net}} = m \cdot a

    Therefore: Fdrive−fresist=m⋅a  ⟹  Fdrive=m⋅a+fresistF_{\text{drive}} - f_{\text{resist}} = m \cdot a \implies F_{\text{drive}} = m \cdot a + f_{\text{resist}}

  2. Calculate the net accelerating force: m⋅a=(4.25×104 kg)⋅(59 m/s2)≈23611 N≈23.61 kNm \cdot a = (4.25 \times 10^4\text{ kg}) \cdot \left(\frac{5}{9}\text{ m/s}^2\right) \approx 23611\text{ N} \approx 23.61\text{ kN}
  3. Compute the total driving force: Convert the resistance into consistent units (fresist=14.8 kN=14800 Nf_{\text{resist}} = 14.8\text{ kN} = 14800\text{ N}): Fdrive=23.61 kN+14.8 kN=38.41 kN≈38.4 kNF_{\text{drive}} = 23.61\text{ kN} + 14.8\text{ kN} = 38.41\text{ kN} \approx 38.4\text{ kN}

Common Pitfall: Forgetting to add the opposing resistive force to the accelerating force (m⋅am \cdot a). The locomotive coupler must not only accelerate the car forward, but it must also balance all resistive forces to maintain that rate of acceleration.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert speeds from km/h to m/s before calculating acceleration, leading to an incorrect acceleration and driving force.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    a=v2−v1Δt  ⟹  a=162.0−72.045.0  ⟹  a=90.045.0=2.0 m/s2a = \frac{v_2 - v_1}{\Delta t} \implies a = \frac{162.0 - 72.0}{45.0} \implies a = \frac{90.0}{45.0} = 2.0\text{ m/s}^2

    Correct

    v1=72.03.6=20.0 m/sv_1 = \frac{72.0}{3.6} = 20.0\text{ m/s}, v2=162.03.6=45.0 m/s  ⟹  a=45.0 m/s−20.0 m/s45.0 s=25.045.0 m/s2≈0.556 m/s2v_2 = \frac{162.0}{3.6} = 45.0\text{ m/s} \implies a = \frac{45.0\text{ m/s} - 20.0\text{ m/s}}{45.0\text{ s}} = \frac{25.0}{45.0}\text{ m/s}^2 \approx 0.556\text{ m/s}^2

    You used the correct kinematic formula for acceleration, but you substituted velocities in kilometers per hour directly into a formula where time is in seconds. Before calculating acceleration in m/s2\text{m/s}^2, both speeds must be converted to standard SI units by dividing by 3.63.6.

  2. Step 2

    Fnet=m⋅a  ⟹  Fdrive−fresist=m⋅aF_{\text{net}} = m \cdot a \implies F_{\text{drive}} - f_{\text{resist}} = m \cdot a

  3. Step 3

    Fdrive=(4.25×104)(2.0)+14.8×103  ⟹  Fdrive=85.0×103+14.8×103=99.8 kNF_{\text{drive}} = (4.25 \times 10^4)(2.0) + 14.8 \times 10^3 \implies F_{\text{drive}} = 85.0 \times 10^3 + 14.8 \times 10^3 = 99.8\text{ kN}

    Correct

    Fdrive=(4.25×104 kg)(59 m/s2)+14.8×103 N≈23.61 kN+14.8 kN=38.4 kNF_{\text{drive}} = (4.25 \times 10^4\text{ kg})\left(\frac{5}{9}\text{ m/s}^2\right) + 14.8 \times 10^3\text{ N} \approx 23.61\text{ kN} + 14.8\text{ kN} = 38.4\text{ kN}

    Your algebraic manipulation and unit conversion for kilonewtons were carried out correctly, but the result is inaccurate because it inherited the incorrect acceleration value (2.0 m/s22.0\text{ m/s}^2) from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly stated and rearranged the kinematic formula a=v2−v1Δta = \frac{v_2 - v_1}{\Delta t}.

You accurately formulated the horizontal force balance using Newton's second law (Fdrive−fresist=m⋅aF_{\text{drive}} - f_{\text{resist}} = m \cdot a).

You handled scientific notation and correctly converted between newtons and kilonewtons.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Omission

You substituted speeds given in km/h\text{km/h} directly into an acceleration equation with time in seconds without first converting them to m/s\text{m/s}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking unit consistency across kinematic and dynamic formulas. Newton's second law requires base SI units (meters, seconds, kilograms) so that force evaluates properly to newtons.

REASONING PATH
Your ACEpath teacher’s suggested approach
Speed Conversion to SI Units
  • To convert km/h\text{km/h} to m/s\text{m/s}, divide by 3.63.6 because 1 km/h=1000 m3600 s=13.6 m/s1\text{ km/h} = \frac{1000\text{ m}}{3600\text{ s}} = \frac{1}{3.6}\text{ m/s}.

  • Always write down the converted values with explicit units (v1=20.0 m/sv_1 = 20.0\text{ m/s}, v2=45.0 m/sv_2 = 45.0\text{ m/s}) before inserting them into kinematic formulas.

Dimensional Compatibility Check
  • Dividing (km/h)(\text{km/h}) by s\text{s} yields km/(h⋅s)\text{km/(h}\cdot\text{s)}, which is not m/s2\text{m/s}^2 and cannot produce newtons (1 N=1 kg⋅m/s21\text{ N} = 1\text{ kg}\cdot\text{m/s}^2).

  • Check the units of each variable in your equation before computing numerical values to confirm all quantities use base SI units.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert speeds to m/s\text{m/s}: v1=72.03.6=20.0 m/sv_1 = \frac{72.0}{3.6} = 20.0\text{ m/s} and v2=162.03.6=45.0 m/sv_2 = \frac{162.0}{3.6} = 45.0\text{ m/s}.

  2. Calculate true acceleration: a=45.0 m/s−20.0 m/s45.0 s=25.045.0 m/s2=59 m/s2≈0.556 m/s2a = \frac{45.0\text{ m/s} - 20.0\text{ m/s}}{45.0\text{ s}} = \frac{25.0}{45.0}\text{ m/s}^2 = \frac{5}{9}\text{ m/s}^2 \approx 0.556\text{ m/s}^2.

  3. Substitute a=59 m/s2a = \frac{5}{9}\text{ m/s}^2 into your force equation: Fdrive=(4.25×104)(59)+1.48×104=23611 N+14800 N=38411 N≈38.4 kNF_{\text{drive}} = (4.25 \times 10^4)\left(\frac{5}{9}\right) + 1.48 \times 10^4 = 23611\text{ N} + 14800\text{ N} = 38411\text{ N} \approx 38.4\text{ kN}.

Final answer

(a) a=0.556 m/s2a = 0.556\text{ m/s}^2; (b) Fdrive=38.4 kNF_{\text{drive}} = 38.4\text{ kN}

NEXT STEPS
Final Takeaways from Your Teacher
  • Form the habit of writing unit symbols next to every numerical quantity in the first line of your calculation.

  • Memorize the common speed conversion factor ÷3.6\div 3.6 from km/h\text{km/h} to m/s\text{m/s}.

  • Work through the follow-up practice problems to reinforce checking unit consistency prior to applying Newton's second law.

OverviewACEpath Teacher's Diagnosis

02 The student subtracts the resistive force instead of adding it when solving for the driving force from the net force equation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v1=72.03.6=20.0 m/s  ⟹  v2=162.03.6=45.0 m/sv_1 = \frac{72.0}{3.6} = 20.0\text{ m/s} \implies v_2 = \frac{162.0}{3.6} = 45.0\text{ m/s}

  2. Step 2

    a=45.0−20.045.0=0.556 m/s2a = \frac{45.0 - 20.0}{45.0} = 0.556\text{ m/s}^2

  3. Step 3

    Fnet=m⋅a=(4.25×104)(0.556)=23.6 kNF_{\text{net}} = m \cdot a = (4.25 \times 10^4)(0.556) = 23.6\text{ kN}

  4. Step 4

    Fdrive=Fnet−fresist  ⟹  Fdrive=23.6−14.8=8.8 kNF_{\text{drive}} = F_{\text{net}} - f_{\text{resist}} \implies F_{\text{drive}} = 23.6 - 14.8 = 8.8\text{ kN}

    Correct

    Fnet=Fdrive−fresist  ⟹  Fdrive=Fnet+fresist=23.6 kN+14.8 kN=38.4 kNF_{\text{net}} = F_{\text{drive}} - f_{\text{resist}} \implies F_{\text{drive}} = F_{\text{net}} + f_{\text{resist}} = 23.6\text{ kN} + 14.8\text{ kN} = 38.4\text{ kN}

    Because the driving force acts forward and resistance acts backward, the net forward force is Fnet=Fdrive−fresistF_{\text{net}} = F_{\text{drive}} - f_{\text{resist}}. Rearranging to isolate the driving force requires adding resistance: Fdrive=Fnet+fresistF_{\text{drive}} = F_{\text{net}} + f_{\text{resist}}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted both velocity values into SI units.

You correctly calculated the linear acceleration of the passenger coach.

You correctly applied Fnet=m⋅aF_{\text{net}} = m \cdot a to find the net force.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in force balance equation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the forward driving force as the difference between the net force and the resistive force, rather than recognizing that the driving force must overcome the resistance in addition to accelerating the coach.

REASONING PATH
Your ACEpath teacher’s suggested approach
Set up the horizontal force balance
  • For motion along a line with forward direction positive, Fnet=∑F=Fforward−FbackwardF_{\text{net}} = \sum F = F_{\text{forward}} - F_{\text{backward}}.

  • Write Fnet=Fdrive−fresistF_{\text{net}} = F_{\text{drive}} - f_{\text{resist}} before rearranging terms.

Check physical intuition
  • To accelerate forward against drag and friction, the engine must pull with a force strictly greater than the accelerating net force alone.

  • Verify that Fdrive=Fnet+fresist>FnetF_{\text{drive}} = F_{\text{net}} + f_{\text{resist}} > F_{\text{net}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the horizontal force balance: Fnet=Fdrive−fresistF_{\text{net}} = F_{\text{drive}} - f_{\text{resist}}.

  2. Add fresistf_{\text{resist}} to both sides: Fdrive=Fnet+fresistF_{\text{drive}} = F_{\text{net}} + f_{\text{resist}}.

  3. Substitute the known values: Fdrive=23.61 kN+14.8 kN=38.41 kN≈38.4 kNF_{\text{drive}} = 23.61\text{ kN} + 14.8\text{ kN} = 38.41\text{ kN} \approx 38.4\text{ kN}.

Final answer

(a) a=0.556 m/s2a = 0.556\text{ m/s}^2; (b) Fdrive=38.4 kNF_{\text{drive}} = 38.4\text{ kN}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a horizontal free-body diagram showing FdriveF_{\text{drive}} pointing right and fresistf_{\text{resist}} pointing left before setting up equations.

  • Practice solving for an applied force when opposing friction or drag is present by using Fapplied=ma+fopposeF_{\text{applied}} = m a + f_{\text{oppose}}.

OverviewACEpath Teacher's Diagnosis

03 The student equates the driving force directly to the net force m · a, completely neglecting the opposing resistive force.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v1=72.03.6=20.0 m/sv_1 = \frac{72.0}{3.6} = 20.0\text{ m/s} ⟹\Longrightarrow v2=162.03.6=45.0 m/sv_2 = \frac{162.0}{3.6} = 45.0\text{ m/s} ⟹\Longrightarrow a=45.0−20.045.0=25.045.0=0.556 m/s2a = \frac{45.0 - 20.0}{45.0} = \frac{25.0}{45.0} = 0.556\text{ m/s}^2

  2. Step 2

    Fdrive=m⋅aF_{\text{drive}} = m \cdot a

    Correct

    Fnet=Fdrive−fresist=m⋅a⟹Fdrive=m⋅a+fresistF_{\text{net}} = F_{\text{drive}} - f_{\text{resist}} = m \cdot a \Longrightarrow F_{\text{drive}} = m \cdot a + f_{\text{resist}}

    Newton's second law states that the net force equals m⋅am \cdot a, not each individual applied force. Because resistance opposes the motion, the coupler hitch must provide enough force to both overcome resistance and accelerate the coach.

  3. Step 3

    Fdrive=(4.25×104 kg)(0.556 m/s2)=23,630 N=23.6 kNF_{\text{drive}} = (4.25 \times 10^4\text{ kg})(0.556\text{ m/s}^2) = 23,630\text{ N} = 23.6\text{ kN}

    Correct

    Fdrive=(4.25×104 kg)(59 m/s2)+14.8 kN≈23.61 kN+14.8 kN=38.4 kNF_{\text{drive}} = (4.25 \times 10^4\text{ kg})\left(\frac{5}{9}\text{ m/s}^2\right) + 14.8\text{ kN} \approx 23.61\text{ kN} + 14.8\text{ kN} = 38.4\text{ kN}

    Your multiplication was calculated accurately based on your formula, but the result represents only the net accelerating force FnetF_{\text{net}}, not the total driving force FdriveF_{\text{drive}}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly divided speeds by 3.63.6 to convert from km/h\text{km/h} to m/s\text{m/s}.

You applied the linear acceleration formula a=ΔvΔta = \frac{\Delta v}{\Delta t} properly to get a≈0.556 m/s2a \approx 0.556\text{ m/s}^2.

You carried out the arithmetic for m⋅am \cdot a accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflating net force with an individual applied force

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Equating an individual applied force directly to m⋅am \cdot a instead of summing all horizontal forces (ΣF=m⋅aΣF = m \cdot a). When resistance opposes motion, the driving force must overcome that resistance in addition to accelerating the mass.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Net Force vs. Applied Force
  • ∑F=m⋅a\sum F = m \cdot a, where ∑F\sum F is the vector sum of all collinear forces acting on the object.

  • Draw a horizontal free-body diagram showing forward driving force and backward resistive force before writing Newton's second law.

Account for Opposing Resistances
  • Fdrive−fresist=m⋅a  ⟹  Fdrive=m⋅a+fresistF_{\text{drive}} - f_{\text{resist}} = m \cdot a \implies F_{\text{drive}} = m \cdot a + f_{\text{resist}}.

  • Check whether the problem mentions friction, drag, or resistance; if it does, add that magnitude to m⋅am \cdot a to find the required forward pull.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write Newton's second law along the horizontal axis: ∑Fx=Fdrive−fresist=m⋅a\sum F_x = F_{\text{drive}} - f_{\text{resist}} = m \cdot a.

  2. Solve for the driving force: Fdrive=m⋅a+fresistF_{\text{drive}} = m \cdot a + f_{\text{resist}}.

  3. Substitute the known values: Fdrive=(4.25×104 kg)(59 m/s2)+14.8 kN=23.61 kN+14.8 kN=38.41 kNF_{\text{drive}} = (4.25 \times 10^4\text{ kg})\left(\frac{5}{9}\text{ m/s}^2\right) + 14.8\text{ kN} = 23.61\text{ kN} + 14.8\text{ kN} = 38.41\text{ kN}.

Final answer

(a) a=0.556 m/s2a = 0.556\text{ m/s}^2; (b) Fdrive=38.4 kNF_{\text{drive}} = 38.4\text{ kN}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always sketch a quick free-body diagram to visually list all forward and backward forces before setting up ∑F=m⋅a\sum F = m \cdot a.

  • Remember that m⋅am \cdot a is the net force resultant, not a separate physical contact force exerted by an engine or hitch.

Lock it in

Similar question

01

A 1200 kg1200\text{ kg} car accelerates uniformly from rest to 90.0 km/h90.0\text{ km/h} in 10.0 s10.0\text{ s} on a level road. If total resistive forces are 400 N400\text{ N}, find: (a) its acceleration in m/s2\text{m/s}^2, and (b) the forward engine traction force in kilonewtons.

Answer

(a) Convert speed: v=90.03.6=25.0 m/sv = \frac{90.0}{3.6} = 25.0\text{ m/s}. Acceleration: a=25.0−010.0=2.50 m/s2a = \frac{25.0 - 0}{10.0} = 2.50\text{ m/s}^2. (b) By Newton's second law: Fengine−fresist=m⋅a  ⟹  Fengine=(1200)(2.50)+400=3000+400=3400 N=3.40 kNF_{\text{engine}} - f_{\text{resist}} = m \cdot a \implies F_{\text{engine}} = (1200)(2.50) + 400 = 3000 + 400 = 3400\text{ N} = 3.40\text{ kN}.

02

An electric subway train of mass m=1.80×105 kgm = 1.80 \times 10^5\text{ kg} slows down from 108 km/h108\text{ km/h} to 36.0 km/h36.0\text{ km/h} over a distance of 400 m400\text{ m} on a horizontal track. Calculate: (a) the magnitude of the train's deceleration in m/s2\text{m/s}^2, and (b) the net braking force required in kilonewtons.

Answer

(a) Convert speeds: v1=1083.6=30.0 m/sv_1 = \frac{108}{3.6} = 30.0\text{ m/s} and v2=36.03.6=10.0 m/sv_2 = \frac{36.0}{3.6} = 10.0\text{ m/s}. Using v22−v12=2asv_2^2 - v_1^2 = 2as: a=10.02−30.022(400)=100−900800=−1.00 m/s2a = \frac{10.0^2 - 30.0^2}{2(400)} = \frac{100 - 900}{800} = -1.00\text{ m/s}^2 (magnitude is 1.00 m/s21.00\text{ m/s}^2). (b) Net braking force: Fnet=m∣a∣=(1.80×105 kg)(1.00 m/s2)=1.80×105 N=180 kNF_{\text{net}} = m |a| = (1.80 \times 10^5\text{ kg})(1.00\text{ m/s}^2) = 1.80 \times 10^5\text{ N} = 180\text{ kN}.

03

A freight train locomotive pulls a consist of mass m=2.50×106 kgm = 2.50 \times 10^6\text{ kg} up a straight incline of slope angle θ=0.573∘\theta = 0.573^\circ (where sin⁡θ≈0.0100\sin\theta \approx 0.0100). The train increases its speed from 36.0 km/h36.0\text{ km/h} to 54.0 km/h54.0\text{ km/h} in 50.0 s50.0\text{ s}. Rolling resistance is 35.0 kN35.0\text{ kN}. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate: (a) the acceleration in m/s2\text{m/s}^2, and (b) the total pulling force exerted by the locomotive in kilonewtons.

Answer

(a) Convert speeds: v1=10.0 m/sv_1 = 10.0\text{ m/s}, v2=15.0 m/sv_2 = 15.0\text{ m/s}. Acceleration: a=15.0−10.050.0=0.100 m/s2a = \frac{15.0 - 10.0}{50.0} = 0.100\text{ m/s}^2. (b) Gravity component parallel to slope: Fg=mgsin⁡θ=(2.50×106)(9.80)(0.0100)=245 kNF_g = mg\sin\theta = (2.50 \times 10^6)(9.80)(0.0100) = 245\text{ kN}. Setting up Newton's second law along the incline: Fpull−fresist−mgsin⁡θ=m⋅aF_{\text{pull}} - f_{\text{resist}} - mg\sin\theta = m \cdot a. Fpull=(2.50×106)(0.100)+35.0×103+245×103=250 kN+35 kN+245 kN=530 kNF_{\text{pull}} = (2.50 \times 10^6)(0.100) + 35.0 \times 10^3 + 245 \times 10^3 = 250\text{ kN} + 35\text{ kN} + 245\text{ kN} = 530\text{ kN}.

Loading workspace…