Resources

In an introductory physics laboratory, students use an ultrasonic motion sensor and an optical photogate array to analyze a glider moving on a tilted air track. The sensor measures position along the track (xx-axis) at intervals of Δt=0.0500 s\Delta t = 0.0500\text{ s}. The glider starts with an initial velocity component v0x=+0.800 m/sv_{0x} = +0.800\text{ m/s} at x0=0.00 mx_0 = 0.00\text{ m} and experiences a constant gravitational component of acceleration ax=−2.00 m/s2a_x = -2.00\text{ m/s}^2. (a) Determine the clock reading tstopt_{\text{stop}} in seconds when the glider's scalar speed reaches v=0 m/sv = 0\text{ m/s}, and find the maximum coordinate xmaxx_{\text{max}} in meters reached by the glider. (b) For the round-trip interval from t=0 st = 0\text{ s} to t=0.800 st = 0.800\text{ s}, calculate the final position xfx_f, the net vector displacement Δr⃗\Delta \vec{r}, and the total scalar distance ss traversed along the track. (c) Calculate the vector average velocity v⃗avg\vec{v}_{\text{avg}} and the scalar average speed vavgv_{\text{avg}} of the glider over the 0.800-second0.800\text{-second} experimental run.

Answer and steps

Final answer

(a) tstop=0.400 st_{\text{stop}} = 0.400\text{ s} and xmax=0.160 mx_{\text{max}} = 0.160\text{ m}; (b) xf=0.00 mx_f = 0.00\text{ m}, Δr⃗=0.00 m  i^\Delta \vec{r} = 0.00\text{ m}\;\hat{i}, and s=0.320 ms = 0.320\text{ m}; (c) v⃗avg=0.00 m/s  i^\vec{v}_{\text{avg}} = 0.00\text{ m/s}\;\hat{i} and vavg=0.400 m/sv_{\text{avg}} = 0.400\text{ m/s}.

Steps

Part (a): Time to Stop and Maximum Position

The glider undergoes motion with constant acceleration along the xx-axis. We can apply the kinematic equations for constant acceleration:

  1. Find the stopping time tstopt_{\text{stop}}: Speed is the magnitude of velocity, so the scalar speed reaches 0 m/s0\text{ m/s} when the velocity component vx=0 m/sv_x = 0\text{ m/s}. vx(t)=v0x+axtv_x(t) = v_{0x} + a_x t Setting vx(tstop)=0 m/sv_x(t_{\text{stop}}) = 0\text{ m/s}: 0=0.800 m/s+(−2.00 m/s2)tstop0 = 0.800\text{ m/s} + (-2.00\text{ m/s}^2) t_{\text{stop}} tstop=0.800 m/s2.00 m/s2=0.400 st_{\text{stop}} = \frac{0.800\text{ m/s}}{2.00\text{ m/s}^2} = 0.400\text{ s}
  2. Find the maximum coordinate xmaxx_{\text{max}}: Using the position equation: x(t)=x0+v0xt+12axt2x(t) = x_0 + v_{0x}t + \frac{1}{2}a_x t^2 Substitute t=tstop=0.400 st = t_{\text{stop}} = 0.400\text{ s}: xmax=0.00 m+(0.800 m/s)(0.400 s)+12(−2.00 m/s2)(0.400 s)2x_{\text{max}} = 0.00\text{ m} + (0.800\text{ m/s})(0.400\text{ s}) + \frac{1}{2}(-2.00\text{ m/s}^2)(0.400\text{ s})^2 xmax=0.320 m−0.160 m=0.160 mx_{\text{max}} = 0.320\text{ m} - 0.160\text{ m} = 0.160\text{ m}

Part (b): Position, Vector Displacement, and Scalar Distance

For the round trip from t=0 st = 0\text{ s} to t=0.800 st = 0.800\text{ s}:

  1. Final position xfx_f: xf=x0+v0xt+12axt2x_f = x_0 + v_{0x}t + \frac{1}{2}a_x t^2 xf=0.00 m+(0.800 m/s)(0.800 s)+12(−2.00 m/s2)(0.800 s)2x_f = 0.00\text{ m} + (0.800\text{ m/s})(0.800\text{ s}) + \frac{1}{2}(-2.00\text{ m/s}^2)(0.800\text{ s})^2 xf=0.640 m−0.640 m=0.00 mx_f = 0.640\text{ m} - 0.640\text{ m} = 0.00\text{ m}
  2. Net vector displacement Δr⃗\Delta \vec{r}: Displacement is a vector pointing from the initial position to the final position: Δr⃗=(xf−x0)i^=(0.00 m−0.00 m)i^=0.00 m  i^\Delta \vec{r} = (x_f - x_0)\hat{i} = (0.00\text{ m} - 0.00\text{ m})\hat{i} = 0.00\text{ m}\;\hat{i}
  3. Total scalar distance ss: Pitfall to avoid: Distance is a scalar representing the total length of the path traveled, so it can never decrease or cancel out during a turnaround.

    • Forward path (t=0 st = 0\text{ s} to 0.400 s0.400\text{ s}): moves from x=0.00 mx = 0.00\text{ m} to x=0.160 mx = 0.160\text{ m}, giving s1=0.160 ms_1 = 0.160\text{ m}.
    • Return path (t=0.400 st = 0.400\text{ s} to 0.800 s0.800\text{ s}): moves from x=0.160 mx = 0.160\text{ m} back to x=0.00 mx = 0.00\text{ m}, giving s2=0.160 ms_2 = 0.160\text{ m}. s=s1+s2=0.160 m+0.160 m=0.320 ms = s_1 + s_2 = 0.160\text{ m} + 0.160\text{ m} = 0.320\text{ m}

Part (c): Vector Average Velocity and Scalar Average Speed

  1. Vector average velocity v⃗avg\vec{v}_{\text{avg}}: Average velocity is defined as the net displacement divided by elapsed time: v⃗avg=Δr⃗Δt=0.00 m  i^0.800 s=0.00 m/s  i^\vec{v}_{\text{avg}} = \frac{\Delta \vec{r}}{\Delta t} = \frac{0.00\text{ m}\;\hat{i}}{0.800\text{ s}} = 0.00\text{ m/s}\;\hat{i}
  2. Scalar average speed vavgv_{\text{avg}}: Average speed is defined as the total scalar distance traveled divided by elapsed time: vavg=sΔt=0.320 m0.800 s=0.400 m/sv_{\text{avg}} = \frac{s}{\Delta t} = \frac{0.320\text{ m}}{0.800\text{ s}} = 0.400\text{ m/s}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student conflates scalar distance with the magnitude of displacement, failing to account for the turnaround point when calculating distance and average speed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    vx=v0x+axt  ⟹  0=0.800−2.00tstop  ⟹  tstop=0.400 sv_x = v_{0x} + a_x t \implies 0 = 0.800 - 2.00 t_{\text{stop}} \implies t_{\text{stop}} = 0.400\text{ s} and xmax=(0.800)(0.400)+0.5(−2.00)(0.400)2=0.160 mx_{\text{max}} = (0.800)(0.400) + 0.5(-2.00)(0.400)^2 = 0.160\text{ m}

  2. Step 2

    xf=(0.800)(0.800)+0.5(−2.00)(0.800)2=0.00 mx_f = (0.800)(0.800) + 0.5(-2.00)(0.800)^2 = 0.00\text{ m} and Δr⃗=(0.00−0.00)i^=0.00i^ m\Delta \vec{r} = (0.00 - 0.00)\hat{i} = 0.00\hat{i}\text{ m}

  3. Step 3

    s=∣xf−x0∣=∣0.00−0.00∣=0.00 ms = |x_f - x_0| = |0.00 - 0.00| = 0.00\text{ m}

    Correct

    s=∣xmax−x0∣+∣xf−xmax∣=0.160 m+0.160 m=0.320 ms = |x_{\text{max}} - x_0| + |x_f - x_{\text{max}}| = 0.160\text{ m} + 0.160\text{ m} = 0.320\text{ m}

    You calculated total distance as ∣xf−x0∣|x_f - x_0|, which is the magnitude of net displacement. Because the glider reverses direction at xmaxx_{\text{max}}, total scalar distance must sum the absolute distance traveled forward and the distance traveled backward.

  4. Step 4

    v⃗avg=Δr⃗Δt=0.000.800=0.00i^ m/s\vec{v}_{\text{avg}} = \frac{\Delta \vec{r}}{\Delta t} = \frac{0.00}{0.800} = 0.00\hat{i}\text{ m/s}

  5. Step 5

    vavg=sΔt=0.000.800=0.00 m/sv_{\text{avg}} = \frac{s}{\Delta t} = \frac{0.00}{0.800} = 0.00\text{ m/s}

    Correct

    vavg=sΔt=0.320 m0.800 s=0.400 m/sv_{\text{avg}} = \frac{s}{\Delta t} = \frac{0.320\text{ m}}{0.800\text{ s}} = 0.400\text{ m/s}

    Your formula for average speed is correct, but the result is affected by substituting the incorrect distance value s=0.00 ms = 0.00\text{ m} instead of 0.320 m0.320\text{ m}.

WHAT YOU DID WELL
Compliments from Your Teacher

You set up and evaluated the 1D kinematic equations with accurate signs for velocity and acceleration.

You correctly distinguished displacement as a vector quantity that accounts for direction and cancels out on a return trip.

You properly used the formula for average velocity as displacement over elapsed time.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflating Scalar Distance with Displacement Magnitude

You equated distance ss to ∣xf−x0∣|x_f - x_0| without splitting the motion at the turnaround point.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating scalar distance as the magnitude of net displacement rather than the accumulated path length. When an object reverses direction, net displacement can be zero, but distance accumulates positively for every segment of motion.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check for Reversals
  • If velocity changes sign during the time interval (vx=0v_x = 0 between t0t_0 and tft_f), the motion has a turnaround point.

  • Find the coordinate at each turnaround time, split the path into unidirectional segments, and sum the absolute values of the segment displacements.

Distance vs. Displacement
  • Displacement is Δr⃗=(xf−x0)i^\Delta \vec{r} = (x_f - x_0)\hat{i}; scalar distance is s=∫∣v(t)∣ dt=∑∣Δxk∣≥∣Δr⃗∣s = \int |v(t)|\,dt = \sum |\Delta x_k| \ge |\Delta \vec{r}|.

  • Never compute distance as simply ∣xf−x0∣|x_f - x_0| unless the object moved strictly in one direction throughout the entire interval.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the turnaround point at tstop=0.400 st_{\text{stop}} = 0.400\text{ s}, where xmax=0.160 mx_{\text{max}} = 0.160\text{ m}.

  2. Compute the forward segment distance: s1=∣xmax−x0∣=∣0.160 m−0.00 m∣=0.160 ms_1 = |x_{\text{max}} - x_0| = |0.160\text{ m} - 0.00\text{ m}| = 0.160\text{ m}.

  3. Compute the return segment distance: s2=∣xf−xmax∣=∣0.00 m−0.160 m∣=0.160 ms_2 = |x_f - x_{\text{max}}| = |0.00\text{ m} - 0.160\text{ m}| = 0.160\text{ m}.

  4. Sum the segment distances: s=s1+s2=0.160 m+0.160 m=0.320 ms = s_1 + s_2 = 0.160\text{ m} + 0.160\text{ m} = 0.320\text{ m}.

  5. Calculate average speed: vavg=sΔt=0.320 m0.800 s=0.400 m/sv_{\text{avg}} = \frac{s}{\Delta t} = \frac{0.320\text{ m}}{0.800\text{ s}} = 0.400\text{ m/s}.

Final answer

(b) s=0.320 ms = 0.320\text{ m}; (c) vavg=0.400 m/sv_{\text{avg}} = 0.400\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review flashcards comparing displacement and distance for oscillating and reversing motions.

  • Practice finding turnaround points by setting v(t)=0v(t) = 0 before computing total distance.

  • Complete the follow-up practice exercises to solidify calculating average speed from segmented distances.

OverviewACEpath Teacher's Diagnosis

02 The student omits the factor of 1/2 in the acceleration term of the displacement formula, overestimating positions, distance, and average speed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    vx=v0x+axt  ⟹  0=0.800−2.00tstop  ⟹  tstop=0.400 sv_x = v_{0x} + a_x t \implies 0 = 0.800 - 2.00 t_{\text{stop}} \implies t_{\text{stop}} = 0.400\text{ s}

  2. Step 2

    xmax=v0xtstop+axtstop2=(0.800)(0.400)+(−2.00)(0.400)2=0.00 mx_{\text{max}} = v_{0x} t_{\text{stop}} + a_x t_{\text{stop}}^2 = (0.800)(0.400) + (-2.00)(0.400)^2 = 0.00\text{ m}

    Correct

    xmax=x0+v0xtstop+12axtstop2=0.00+(0.800)(0.400)+12(−2.00)(0.400)2=0.160 mx_{\text{max}} = x_0 + v_{0x}t_{\text{stop}} + \frac{1}{2}a_x t_{\text{stop}}^2 = 0.00 + (0.800)(0.400) + \frac{1}{2}(-2.00)(0.400)^2 = 0.160\text{ m}

    You omitted the factor of 12\frac{1}{2} in front of the acceleration term axt2a_x t^2. Because you wrote axt2a_x t^2 instead of 12axt2\frac{1}{2}a_x t^2, the acceleration term doubled and canceled out the initial displacement entirely, giving 0.00 m0.00\text{ m} instead of 0.160 m0.160\text{ m}.

  3. Step 3

    xf=v0xt+axt2=(0.800)(0.800)+(−2.00)(0.800)2=−0.640 m  ⟹  Δr⃗=−0.640i^ mx_f = v_{0x}t + a_x t^2 = (0.800)(0.800) + (-2.00)(0.800)^2 = -0.640\text{ m} \implies \Delta \vec{r} = -0.640\hat{i}\text{ m}

    Correct

    xf=x0+v0xt+12axt2=0.00+(0.800)(0.800)+12(−2.00)(0.800)2=0.00 m  ⟹  Δr⃗=0.00 m  i^x_f = x_0 + v_{0x}t + \frac{1}{2}a_x t^2 = 0.00 + (0.800)(0.800) + \frac{1}{2}(-2.00)(0.800)^2 = 0.00\text{ m} \implies \Delta \vec{r} = 0.00\text{ m}\;\hat{i}

    You repeated the omitted factor of 12\frac{1}{2} in the position formula at t=0.800 st = 0.800\text{ s}, which caused your final position and net displacement to be incorrect.

  4. Step 4

    s=∣xmax−x0∣+∣xf−xmax∣=∣0.00−0.00∣+∣−0.640−0.00∣=0.640 ms = |x_{\text{max}} - x_0| + |x_f - x_{\text{max}}| = |0.00 - 0.00| + |-0.640 - 0.00| = 0.640\text{ m}

    Correct

    s=∣xmax−x0∣+∣xf−xmax∣=∣0.160−0.00∣+∣0.00−0.160∣=0.320 ms = |x_{\text{max}} - x_0| + |x_f - x_{\text{max}}| = |0.160 - 0.00| + |0.00 - 0.160| = 0.320\text{ m}

    Your conceptual method for finding total scalar distance by summing the path segments is completely correct, but your numerical result was affected by the incorrect values of xmaxx_{\text{max}} and xfx_f.

  5. Step 5

    v⃗avg=Δr⃗Δt=−0.640i^0.800=−0.800i^ m/sandvavg=sΔt=0.6400.800=0.800 m/s\vec{v}_{\text{avg}} = \frac{\Delta \vec{r}}{\Delta t} = \frac{-0.640\hat{i}}{0.800} = -0.800\hat{i}\text{ m/s} \quad \text{and} \quad v_{\text{avg}} = \frac{s}{\Delta t} = \frac{0.640}{0.800} = 0.800\text{ m/s}

    Correct

    v⃗avg=Δr⃗Δt=0.00i^0.800=0.00 m/s  i^andvavg=sΔt=0.3200.800=0.400 m/s\vec{v}_{\text{avg}} = \frac{\Delta \vec{r}}{\Delta t} = \frac{0.00\hat{i}}{0.800} = 0.00\text{ m/s}\;\hat{i} \quad \text{and} \quad v_{\text{avg}} = \frac{s}{\Delta t} = \frac{0.320}{0.800} = 0.400\text{ m/s}

    You correctly distinguished between vector average velocity Δr⃗Δt\frac{\Delta \vec{r}}{\Delta t} and scalar average speed sΔt\frac{s}{\Delta t}, but both final values inherited the errors from your earlier position calculations.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the velocity-time equation vx=v0x+axtv_x = v_{0x} + a_x t to find the turnaround time tstop=0.400 st_{\text{stop}} = 0.400\text{ s}.

You correctly split the motion into two distinct path segments to calculate the total scalar distance.

You properly distinguished vector average velocity (using displacement) from scalar average speed (using total distance).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing Factor of 1/2 in Kinematics Formula

You wrote axt2a_x t^2 instead of 12axt2\frac{1}{2}a_x t^2 when calculating position under constant acceleration.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the acceleration term with a linear rate or forgot the integration factor of 12\frac{1}{2} that arises when integrating velocity v(t)=v0+atv(t) = v_0 + at to obtain displacement Δx=v0t+12at2\Delta x = v_0 t + \frac{1}{2}at^2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Constant Acceleration Displacement Formula
  • For constant acceleration, displacement is given by Δx=v0xt+12axt2\Delta x = v_{0x}t + \frac{1}{2}a_x t^2.

  • Always verify that the factor 12\frac{1}{2} is written in front of at2a t^2 before substituting numerical values.

Average Velocity Sanity Check
  • For constant acceleration, displacement can also be checked using average velocity: Δx=v0x+vx2t\Delta x = \frac{v_{0x} + v_x}{2}t.

  • Use Δx=0.800+02(0.400)=0.160 m\Delta x = \frac{0.800 + 0}{2}(0.400) = 0.160\text{ m} to quickly cross-check your maximum position.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate maximum position: xmax=0.00+(0.800)(0.400)+12(−2.00)(0.400)2=0.320−0.160=0.160 mx_{\text{max}} = 0.00 + (0.800)(0.400) + \frac{1}{2}(-2.00)(0.400)^2 = 0.320 - 0.160 = 0.160\text{ m}.

  2. Recalculate final position at t=0.800 st = 0.800\text{ s}: xf=0.00+(0.800)(0.800)+12(−2.00)(0.800)2=0.640−0.640=0.00 mx_f = 0.00 + (0.800)(0.800) + \frac{1}{2}(-2.00)(0.800)^2 = 0.640 - 0.640 = 0.00\text{ m}.

  3. Compute net displacement: Δr⃗=(xf−x0)i^=(0.00−0.00)i^=0.00 m  i^\Delta \vec{r} = (x_f - x_0)\hat{i} = (0.00 - 0.00)\hat{i} = 0.00\text{ m}\;\hat{i}.

  4. Compute total scalar distance: s=∣xmax−x0∣+∣xf−xmax∣=∣0.160−0.00∣+∣0.00−0.160∣=0.160+0.160=0.320 ms = |x_{\text{max}} - x_0| + |x_f - x_{\text{max}}| = |0.160 - 0.00| + |0.00 - 0.160| = 0.160 + 0.160 = 0.320\text{ m}.

  5. Compute average velocity: v⃗avg=Δr⃗Δt=0.00i^0.800=0.00 m/s  i^\vec{v}_{\text{avg}} = \frac{\Delta \vec{r}}{\Delta t} = \frac{0.00\hat{i}}{0.800} = 0.00\text{ m/s}\;\hat{i}.

  6. Compute average speed: vavg=sΔt=0.320 m0.800 s=0.400 m/sv_{\text{avg}} = \frac{s}{\Delta t} = \frac{0.320\text{ m}}{0.800\text{ s}} = 0.400\text{ m/s}.

Final answer

(a) tstop=0.400 st_{\text{stop}} = 0.400\text{ s}, xmax=0.160 mx_{\text{max}} = 0.160\text{ m}; (b) xf=0.00 mx_f = 0.00\text{ m}, Δr⃗=0.00 m  i^\Delta \vec{r} = 0.00\text{ m}\;\hat{i}, s=0.320 ms = 0.320\text{ m}; (c) v⃗avg=0.00 m/s  i^\vec{v}_{\text{avg}} = 0.00\text{ m/s}\;\hat{i}, vavg=0.400 m/sv_{\text{avg}} = 0.400\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the standard kinematic quartet, paying special attention to the 12\frac{1}{2} in Δx=v0t+12at2\Delta x = v_0 t + \frac{1}{2}at^2.

  • Practice checking displacements using the alternative formula Δx=v0+v2t\Delta x = \frac{v_0 + v}{2}t whenever both initial and final velocities are known.

  • Keep applying your excellent habit of separating total scalar distance into individual forward and backward segments whenever an object reverses direction.

OverviewACEpath Teacher's Diagnosis

03 The student drops the negative sign of the acceleration component, treating acceleration as positive and resulting in continuously increasing position and speed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    vx=v0x+ax∗t  ⟹  0=0.800+2.00∗tstop  ⟹  tstop=−0.400 sv_x = v_{0x} + a_x * t \implies 0 = 0.800 + 2.00 * t_{\text{stop}} \implies t_{\text{stop}} = -0.400\text{ s}

    Correct

    0=0.800 m/s+(−2.00 m/s2)tstop  ⟹  tstop=0.400 s0 = 0.800\text{ m/s} + (-2.00\text{ m/s}^2)t_{\text{stop}} \implies t_{\text{stop}} = 0.400\text{ s}

    You set up the velocity equation correctly, but you substituted ax=+2.00 m/s2a_x = +2.00\text{ m/s}^2 instead of ax=−2.00 m/s2a_x = -2.00\text{ m/s}^2. Because the acceleration opposes the initial velocity, its sign must remain negative, which yields a positive clock reading of tstop=0.400 st_{\text{stop}} = 0.400\text{ s}.

  2. Step 2

    xmax=(0.800)(−0.400)+0.5(2.00)(−0.400)2=−0.160 mx_{\text{max}} = (0.800)(-0.400) + 0.5(2.00)(-0.400)^2 = -0.160\text{ m}

    Correct

    xmax=0.00 m+(0.800 m/s)(0.400 s)+12(−2.00 m/s2)(0.400 s)2=0.160 mx_{\text{max}} = 0.00\text{ m} + (0.800\text{ m/s})(0.400\text{ s}) + \frac{1}{2}(-2.00\text{ m/s}^2)(0.400\text{ s})^2 = 0.160\text{ m}

    You applied the displacement equation correctly, but using the incorrect values ax=+2.00 m/s2a_x = +2.00\text{ m/s}^2 and tstop=−0.400 st_{\text{stop}} = -0.400\text{ s} produced a negative maximum position instead of +0.160 m+0.160\text{ m}.

  3. Step 3

    xf=(0.800)(0.800)+0.5(2.00)(0.800)2=0.640+0.640=1.280 m  ⟹  Δr=1.280 i m  ⟹  s=1.280 mx_f = (0.800)(0.800) + 0.5(2.00)(0.800)^2 = 0.640 + 0.640 = 1.280\text{ m} \implies \Delta r = 1.280\text{ i m} \implies s = 1.280\text{ m}

    Correct

    xf=0.00 m  ⟹  Δr⃗=0.00 m  i^  ⟹  s=0.160 m+0.160 m=0.320 mx_f = 0.00\text{ m} \implies \Delta \vec{r} = 0.00\text{ m}\;\hat{i} \implies s = 0.160\text{ m} + 0.160\text{ m} = 0.320\text{ m}

    Using +2.00 m/s2+2.00\text{ m/s}^2 caused the glider to appear to accelerate continuously forward rather than reverse direction. With the correct negative acceleration, the glider returns to xf=0.00 mx_f = 0.00\text{ m} at t=0.800 st = 0.800\text{ s}, giving a net displacement of 0.00 m  i^0.00\text{ m}\;\hat{i} and a round-trip distance of 0.320 m0.320\text{ m}.

  4. Step 4

    vavg=ΔrΔt=1.2800.800=1.600 i m/s  ⟹  vavg=sΔt=1.2800.800=1.600 m/sv_{\text{avg}} = \frac{\Delta r}{\Delta t} = \frac{1.280}{0.800} = 1.600\text{ i m/s} \implies v_{\text{avg}} = \frac{s}{\Delta t} = \frac{1.280}{0.800} = 1.600\text{ m/s}

    Correct

    v⃗avg=0.00 m  i^0.800 s=0.00 m/s  i^andvavg=0.320 m0.800 s=0.400 m/s\vec{v}_{\text{avg}} = \frac{0.00\text{ m}\;\hat{i}}{0.800\text{ s}} = 0.00\text{ m/s}\;\hat{i} \quad \text{and} \quad v_{\text{avg}} = \frac{0.320\text{ m}}{0.800\text{ s}} = 0.400\text{ m/s}

    You correctly used displacement for average velocity and distance for average speed. However, because your displacement and distance were inherited from the earlier sign error, your calculated averages became 1.600 m/s1.600\text{ m/s} instead of 0.00 m/s  i^0.00\text{ m/s}\;\hat{i} and 0.400 m/s0.400\text{ m/s}.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the correct kinematic equations relating position, velocity, acceleration, and time.

You clearly distinguished the vector nature of displacement and average velocity from the scalar nature of distance and average speed.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in 1D vector component

You dropped the negative sign on the acceleration component, writing +2.00+2.00 instead of −2.00 m/s2-2.00\text{ m/s}^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In one-dimensional motion, vector components carry direction through their algebraic signs. Treating acceleration as a positive scalar magnitude strips away its backward direction along the axis, turning deceleration into forward speeding up and resulting in physically impossible negative clock times.

REASONING PATH
Your ACEpath teacher’s suggested approach
Preserve Component Signs
  • In 1D kinematics, vector components (vxv_x, axa_x, Δx\Delta x) can be positive or negative. The sign specifies direction along the axis.

  • Always copy the exact signed value (here ax=−2.00 m/s2a_x = -2.00\text{ m/s}^2) directly into the algebraic formula.

Sanity-Check Elapsed Time
  • Elapsed time intervals and clock readings after t=0t = 0 must be non-negative.

  • If a calculation gives t<0t < 0 for a future event, pause and re-check the signs of your velocity and acceleration components.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set vx(tstop)=0 m/sv_x(t_{\text{stop}}) = 0\text{ m/s} with the given acceleration component: 0=0.800 m/s+(−2.00 m/s2)tstop  ⟹  tstop=0.400 s0 = 0.800\text{ m/s} + (-2.00\text{ m/s}^2)t_{\text{stop}} \implies t_{\text{stop}} = 0.400\text{ s}.

  2. Calculate the maximum coordinate at the turnaround point: xmax=0.00 m+(0.800 m/s)(0.400 s)+12(−2.00 m/s2)(0.400 s)2=0.160 mx_{\text{max}} = 0.00\text{ m} + (0.800\text{ m/s})(0.400\text{ s}) + \frac{1}{2}(-2.00\text{ m/s}^2)(0.400\text{ s})^2 = 0.160\text{ m}.

  3. Evaluate position at t=0.800 st = 0.800\text{ s}: xf=(0.800)(0.800)+12(−2.00)(0.800)2=0.00 mx_f = (0.800)(0.800) + \frac{1}{2}(-2.00)(0.800)^2 = 0.00\text{ m}. Thus Δr⃗=(xf−x0)i^=0.00 m  i^\Delta \vec{r} = (x_f - x_0)\hat{i} = 0.00\text{ m}\;\hat{i}.

  4. Sum the magnitudes of each segment for scalar distance: s=∣0.160 m−0.00 m∣+∣0.00 m−0.160 m∣=0.320 ms = |0.160\text{ m} - 0.00\text{ m}| + |0.00\text{ m} - 0.160\text{ m}| = 0.320\text{ m}.

  5. Compute vector average velocity and scalar average speed: v⃗avg=0.00 m  i^0.800 s=0.00 m/s  i^\vec{v}_{\text{avg}} = \frac{0.00\text{ m}\;\hat{i}}{0.800\text{ s}} = 0.00\text{ m/s}\;\hat{i} and vavg=0.320 m0.800 s=0.400 m/sv_{\text{avg}} = \frac{0.320\text{ m}}{0.800\text{ s}} = 0.400\text{ m/s}.

Final answer

(a) tstop=0.400 st_{\text{stop}} = 0.400\text{ s}, xmax=0.160 mx_{\text{max}} = 0.160\text{ m}; (b) xf=0.00 mx_f = 0.00\text{ m}, Δr⃗=0.00 m  i^\Delta \vec{r} = 0.00\text{ m}\;\hat{i}, s=0.320 ms = 0.320\text{ m}; (c) v⃗avg=0.00 m/s  i^\vec{v}_{\text{avg}} = 0.00\text{ m/s}\;\hat{i}, vavg=0.400 m/sv_{\text{avg}} = 0.400\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that all vector components retain their signs when substituting into kinematic formulas.

  • When an object slows down to a stop and reverses, split the scalar distance calculation at the turnaround point tstopt_{\text{stop}}.

Lock it in

Similar question

01

A cart on a track starts at x0=1.0 mx_0 = 1.0\text{ m}, moves with constant velocity to x=4.0 mx = 4.0\text{ m} in 2.0 s2.0\text{ s}, and then immediately moves backward to xf=2.0 mx_f = 2.0\text{ m} in an additional 1.0 s1.0\text{ s}. Find the net displacement Δr⃗\Delta \vec{r}, total distance ss, average velocity v⃗avg\vec{v}_{\text{avg}}, and average speed vavgv_{\text{avg}} over the entire 3.0-second3.0\text{-second} interval.

Answer

Δr⃗=(2.0−1.0)i^=+1.0 m  i^\Delta \vec{r} = (2.0 - 1.0)\hat{i} = +1.0\text{ m}\;\hat{i}. Total distance sums both segments: s=∣4.0−1.0∣+∣2.0−4.0∣=3.0+2.0=5.0 ms = |4.0 - 1.0| + |2.0 - 4.0| = 3.0 + 2.0 = 5.0\text{ m}. Average velocity is v⃗avg=+1.0i^3.0 s=+0.33 m/s  i^\vec{v}_{\text{avg}} = \frac{+1.0\hat{i}}{3.0\text{ s}} = +0.33\text{ m/s}\;\hat{i}. Average speed is vavg=5.0 m3.0 s=1.67 m/sv_{\text{avg}} = \frac{5.0\text{ m}}{3.0\text{ s}} = 1.67\text{ m/s}.

02

A ball is thrown vertically upward from ground level (y0=0 my_0 = 0\text{ m}) with an initial speed of 19.6 m/s19.6\text{ m/s} under constant acceleration ay=−9.8 m/s2a_y = -9.8\text{ m/s}^2. It reaches its peak and returns to the ground at t=4.0 st = 4.0\text{ s}. Calculate: (a) the net displacement Δr⃗\Delta \vec{r} at t=4.0 st = 4.0\text{ s}, (b) the maximum height ymaxy_{\text{max}}, (c) the total distance ss traveled, and (d) the average speed vavgv_{\text{avg}} over the flight.

Answer

(a) Δr⃗=0.0 m  j^\Delta \vec{r} = 0.0\text{ m}\;\hat{j} because yf=y0=0 my_f = y_0 = 0\text{ m}. (b) Turnaround occurs at tpeak=19.69.8=2.0 st_{\text{peak}} = \frac{19.6}{9.8} = 2.0\text{ s}, giving ymax=(19.6)(2.0)−0.5(9.8)(2.0)2=19.6 my_{\text{max}} = (19.6)(2.0) - 0.5(9.8)(2.0)^2 = 19.6\text{ m}. (c) Total distance is s=∣19.6−0∣+∣0−19.6∣=39.2 ms = |19.6 - 0| + |0 - 19.6| = 39.2\text{ m}. (d) Average speed is vavg=39.2 m4.0 s=9.8 m/sv_{\text{avg}} = \frac{39.2\text{ m}}{4.0\text{ s}} = 9.8\text{ m/s}.

03

A particle moves along the xx-axis according to x(t)=t3−6t2+9tx(t) = t^3 - 6t^2 + 9t, where xx is in meters and tt is in seconds. For the time interval from t=0 st = 0\text{ s} to t=4 st = 4\text{ s}, determine: (a) the times at which the particle reverses direction, (b) the net displacement Δx\Delta x, (c) the total scalar distance ss traveled, and (d) the scalar average speed vavgv_{\text{avg}}.

Answer

(a) Velocity v(t)=3t2−12t+9=3(t−1)(t−3)v(t) = 3t^2 - 12t + 9 = 3(t - 1)(t - 3). Reversals occur at t=1 st = 1\text{ s} and t=3 st = 3\text{ s}. (b) Positions: x(0)=0 mx(0) = 0\text{ m}, x(1)=4 mx(1) = 4\text{ m}, x(3)=0 mx(3) = 0\text{ m}, x(4)=4 mx(4) = 4\text{ m}. Net displacement is Δx=x(4)−x(0)=+4 m\Delta x = x(4) - x(0) = +4\text{ m}. (c) Total distance: s=∣x(1)−x(0)∣+∣x(3)−x(1)∣+∣x(4)−x(3)∣=∣4−0∣+∣0−4∣+∣4−0∣=4+4+4=12 ms = |x(1) - x(0)| + |x(3) - x(1)| + |x(4) - x(3)| = |4 - 0| + |0 - 4| + |4 - 0| = 4 + 4 + 4 = 12\text{ m}. (d) Average speed is vavg=12 m4 s=3.0 m/sv_{\text{avg}} = \frac{12\text{ m}}{4\text{ s}} = 3.0\text{ m/s}.

Loading workspace…