Resources
An industrial vapor-compression refrigerator removes heat from a refrigerated compartment maintained at and exhausts heat into a kitchen environment at . The actual coefficient of performance of the unit is . During a continuous cooling cycle, an electric compressor delivers of work to the refrigerant. Calculate: (a) the heat removed from the cold space , (b) the heat rejected to the kitchen ambient space , and (c) the ideal Carnot coefficient of performance operating across the identical temperature span.
Answer and steps
Final answer
(a) ; (b) ; (c) .
Steps
Part (a): Heat Removed from the Cold Space,
The coefficient of performance () of a refrigerator measures its cooling effectiveness, defined as the ratio of the desired thermal energy extracted from the cold reservoir () to the net work input () required to operate the compressor:
Rearranging to solve for the heat extracted from the refrigerated compartment:
Substitute the given values:
Part (b): Heat Rejected to the Hot Ambient Space,
For a refrigeration system operating in a continuous closed cycle, the internal energy of the refrigerant does not change overall (). By the First Law of Thermodynamics, energy conservation dictates that the total heat expelled into the warmer environment equals the sum of the heat absorbed and the work done on the refrigerant:
Using the unrounded value of :
Part (c): Ideal Carnot Coefficient of Performance,
The theoretical maximum coefficient of performance between two thermal reservoirs is given by the Carnot limit.
Important Pitfall: Reservoir temperatures must always be converted to the absolute thermodynamic temperature scale (Kelvin) before evaluating thermodynamic ratios.
Convert the temperatures to Kelvin:
The Carnot coefficient of performance for a cooling cycle is defined as:
Substitute the absolute temperatures:
The actual system operates at , which is well below the upper theoretical thermodynamic limit of due to irreversible losses such as friction, fluid viscosity, and non-ideal heat transfer.
Typical errors
01 The student calculates the Carnot coefficient of performance using Celsius temperatures directly instead of converting to absolute temperatures in Kelvin.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You correctly stated the Carnot formula, but thermodynamic temperature ratios require absolute temperatures in Kelvin. Substituting degrees Celsius produced a negative coefficient of performance, which is physically impossible for a Carnot cooling cycle.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the heat removed from the cold reservoir using the definition of COP.
You correctly applied energy conservation to find the heat delivered to the hot reservoir.
You identified the correct algebraic formula for the Carnot refrigerator coefficient of performance.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou substituted temperatures in degrees Celsius into a thermodynamic efficiency ratio instead of first converting them to the absolute Kelvin scale (). While differences in temperature () have identical numerical values in Celsius and Kelvin, individual reservoir temperatures ( and ) in thermodynamic expressions must always be evaluated in Kelvin.
REASONING PATH
Your ACEpath teacher’s suggested approach- Absolute Temperature Requirement
Thermodynamic efficiencies and Carnot relations are derived from ratios of absolute thermodynamic temperatures and require temperatures in Kelvin ().
Always convert temperatures to Kelvin by adding before substituting into thermodynamic formulas.
- Sanity Check on COP
A refrigerator's coefficient of performance is a ratio of positive thermal energy absorbed to work done, so always. Moreover, .
If a calculated Carnot COP is negative or smaller than the actual COP (), check immediately for a missing Kelvin conversion.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert both reservoir temperatures from Celsius to Kelvin: and .
Evaluate the temperature difference in the denominator: .
Substitute the absolute values into the Carnot COP expression: .
(a) ; (b) ; (c)
02 The student uses the heat pump definition for COP instead of a refrigerator, leading to subtracting work to find the cold-reservoir heat.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
A refrigerator is designed to remove heat from the cold space, so its coefficient of performance is defined as , not . Multiplying gives the heat extracted from the cold reservoir , not the heat rejected to the hot reservoir .
- Step 2Correct
Your energy conservation relation was algebraically sound, but because was assigned the value of from the previous step, your values for both and became inverted and numerically incorrect.
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted both operating temperatures into absolute thermodynamic temperature (Kelvin).
You used the correct thermodynamic formula and obtained the exact value for the ideal Carnot coefficient of performance.
You correctly recognized that the First Law of Thermodynamics relates the reservoir heats and compressor work by .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the performance metric of a refrigerator with that of a heat pump. A refrigerator's objective is cooling, meaning the desired output is heat removed from the cold reservoir (), giving . In contrast, a heat pump's objective is heating, meaning the desired output is heat delivered to the warm space (), giving .
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify the Desired Effect
For any cyclic thermal device, .
Ask yourself: Is this device intended to cool (refrigerator/AC) or heat (heat pump)? If cooling, the numerator is ; if heating, the numerator is .
- Check the Heat Magnitudes
By energy conservation, , which strictly requires whenever .
Verify that your exhaust heat is always strictly larger than your cooling heat by an amount equal to the work input.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up the cooling coefficient of performance definition: .
Solve for the cooling heat: .
Apply the First Law of Thermodynamics for the cycle: .
(a) ; (b) ; (c)
03 The student subtracts work from heat removed instead of adding it, violating energy conservation for the rejected heat.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
In a cyclic refrigerator, both the heat extracted from the cold compartment and the electrical work supplied by the compressor enter the refrigerant and must be expelled into the hot ambient environment: . Subtracting work confuses the refrigerator energy balance with that of a heat engine ().
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the definition of refrigerator performance to find .
You converted reservoir temperatures to Kelvin before evaluating the Carnot limit.
You applied the Carnot cooling formula accurately to obtain .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set instead of adding the two energy inputs together.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou likely confused the energy flow of a refrigerator with that of a heat engine. In a heat engine, thermal energy enters from the hot reservoir and splits into useful work out plus waste heat (). In a refrigerator, work is done on the working fluid to pump heat out of the cold reservoir, so all incoming energy must be rejected at the hot side ().
REASONING PATH
Your ACEpath teacher’s suggested approach- First Law for Cyclic Devices
For any closed thermodynamic cycle, , meaning total energy entering equals total energy leaving.
Always draw an energy flow box: identify arrows going in ( and ) and arrows going out (), then equate inputs to outputs.
CORRECTED PATH
ACEpath Teacher's DemonstrationApply the First Law of Thermodynamics to the cyclic refrigerator: .
Substitute the heat removed and the work input: .
Round to three significant figures: .
(a) ; (b) ; (c)
Lock it in
Why must reservoir temperatures be converted to Kelvin when calculating Carnot efficiency or Carnot COP?
Carnot relationships rely on the thermodynamic definition of absolute temperature derived from heat ratios (), which holds only on an absolute scale where zero represents absolute zero.
Similar question
A residential air conditioner maintains an indoor temperature of while discharging heat outdoors at . Calculate the maximum theoretical Carnot coefficient of performance for this cooling cycle.
Answer
. Steps: Convert to Kelvin: and . Compute .
A deep-freeze storage unit maintains its interior at in an ambient warehouse at . It requires of electrical compressor work per cycle and operates at of its ideal Carnot COP. Calculate: (a) , (b) actual , and (c) the heat removed per cycle.
Answer
(a) , (b) , (c) . Steps: , , . (a) . (b) . (c) .
A heat pump operates in reverse of a refrigerator to heat a building at by drawing heat from outdoor winter air at . (a) Derive or state the relationship between and . (b) Compute the maximum theoretical heat delivered to the building per of electrical energy input.
Answer
(a) . (b) . Steps: Convert temperatures: , , . Calculate . Heat delivered: .