Resources

A high-speed aerodynamic glider moves along an extended straight frictionless track. An automated air-brake system provides a velocity-dependent deceleration such that its velocity graph against time asymptotically approaches zero according to v(t)=v0e−βtv(t) = v_0 e^{-\beta t}, where initial speed v0=25.0 m/sv_0 = 25.0\text{ m/s} and damping constant β=0.125 s−1\beta = 0.125\text{ s}^{-1}. (a) Determine the asymptotic limit of the glider's total displacement Δx∞=lim⁡t→∞Δx(t)\Delta x_{\infty} = \lim_{t \to \infty} \Delta x(t). (b) Determine the instantaneous acceleration a(t)a(t) of the glider at the instant when its displacement reaches exactly 80.0%80.0\% of this asymptotic limit.

Answer and steps

Final answer

(a) Δx∞=200 m\Delta x_{\infty} = 200\text{ m}; (b) a=−0.625 m/s2a = -0.625\text{ m/s}^2

Steps

Part (a): Determine the Asymptotic Limit of Total Displacement

The relationship between velocity v(t)v(t) and displacement Δx(t)\Delta x(t) from time t=0t = 0 to tt is given by integrating the velocity function:

Δx(t)=∫0tv(t′) dt′\Delta x(t) = \int_{0}^{t} v(t') \, dt'

Substitute the given exponential velocity function v(t)=v0e−βtv(t) = v_0 e^{-\beta t}:

Δx(t)=∫0tv0e−βt′ dt′=[−v0βe−βt′]0t=v0β(1−e−βt)\Delta x(t) = \int_{0}^{t} v_0 e^{-\beta t'} \, dt' = \left[ -\frac{v_0}{\beta} e^{-\beta t'} \right]_{0}^{t} = \frac{v_0}{\beta}\left(1 - e^{-\beta t}\right)

Taking the limit as t→∞t \to \infty, the exponential term vanishes because lim⁡t→∞e−βt=0\lim_{t \to \infty} e^{-\beta t} = 0:

Δx∞=lim⁡t→∞Δx(t)=v0β\Delta x_{\infty} = \lim_{t \to \infty} \Delta x(t) = \frac{v_0}{\beta}

Substitute the given values v0=25.0 m/sv_0 = 25.0\text{ m/s} and β=0.125 s−1\beta = 0.125\text{ s}^{-1}:

Δx∞=25.0 m/s0.125 s−1=200 m\Delta x_{\infty} = \frac{25.0\text{ m/s}}{0.125\text{ s}^{-1}} = 200\text{ m}


Part (b): Determine the Acceleration at 80.0%80.0\% of the Asymptotic Limit

First, find the acceleration function a(t)a(t) by differentiating the velocity with respect to time:

a(t)=dvdt=ddt(v0e−βt)=−βv0e−βt=−βv(t)a(t) = \frac{dv}{dt} = \frac{d}{dt}\left(v_0 e^{-\beta t}\right) = -\beta v_0 e^{-\beta t} = -\beta v(t)

Next, find the glider's velocity at the instant when the displacement reaches 80.0%80.0\% of its asymptotic limit:

Δx(t)=0.800Δx∞\Delta x(t) = 0.800 \Delta x_{\infty}

Using the expression Δx(t)=Δx∞(1−e−βt)\Delta x(t) = \Delta x_{\infty}\left(1 - e^{-\beta t}\right):

Δx∞(1−e−βt)=0.800Δx∞\Delta x_{\infty}\left(1 - e^{-\beta t}\right) = 0.800 \Delta x_{\infty}

1−e−βt=0.800  ⟹  e−βt=0.2001 - e^{-\beta t} = 0.800 \implies e^{-\beta t} = 0.200

Substitute this exponential factor back into the velocity equation:

v=v0e−βt=(25.0 m/s)⋅(0.200)=5.00 m/sv = v_0 e^{-\beta t} = (25.0\text{ m/s}) \cdot (0.200) = 5.00\text{ m/s}

Finally, evaluate the instantaneous acceleration:

a=−βv=−(0.125 s−1)⋅(5.00 m/s)=−0.625 m/s2a = -\beta v = -(0.125\text{ s}^{-1}) \cdot (5.00\text{ m/s}) = -0.625\text{ m/s}^2

(Pitfall to avoid: Be careful not to omit the negative sign. Because the glider is decelerating, the acceleration opposes the direction of positive displacement.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets the negative sign when differentiating the exponential function for acceleration, reporting a positive acceleration instead of a deceleration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δx∞=∫0∞v0e−βt dt=v0β  ⟹  Δx∞=25.00.125=200 m\Delta x_{\infty} = \int_0^{\infty} v_0 e^{-\beta t}\,dt = \frac{v_0}{\beta} \implies \Delta x_{\infty} = \frac{25.0}{0.125} = 200\text{ m}

  2. Step 2

    Δx(t)=Δx∞(1−e−βt)=0.80Δx∞  ⟹  1−e−βt=0.80  ⟹  e−βt=0.20\Delta x(t) = \Delta x_{\infty}(1 - e^{-\beta t}) = 0.80 \Delta x_{\infty} \implies 1 - e^{-\beta t} = 0.80 \implies e^{-\beta t} = 0.20

  3. Step 3

    a(t)=dvdt=βv0e−βta(t) = \frac{dv}{dt} = \beta v_0 e^{-\beta t}

    Correct

    a(t)=dvdt=−βv0e−βta(t) = \frac{dv}{dt} = -\beta v_0 e^{-\beta t}

    Applying the chain rule to e−βte^{-\beta t} produces a factor of −β-\beta, not +β+\beta, because the exponent has a negative coefficient.

  4. Step 4

    a=0.125×25.0×0.20=0.625 m/s2a = 0.125 \times 25.0 \times 0.20 = 0.625\text{ m/s}^2

    Correct

    a=−(0.125 s−1)(25.0 m/s)(0.20)=−0.625 m/s2a = -(0.125\text{ s}^{-1})(25.0\text{ m/s})(0.20) = -0.625\text{ m/s}^2

    Because of the omitted negative sign in the derivative, your final acceleration magnitude is correct but has the wrong sign for a decelerating glider.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly integrated the exponential velocity function over an infinite time interval to obtain Δx∞=200 m\Delta x_{\infty} = 200\text{ m}.

You accurately determined that e−βt=0.20e^{-\beta t} = 0.20 at 80.0%80.0\% of the asymptotic displacement limit.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing negative sign from exponential chain rule

You dropped the negative sign from the derivative ddt(e−βt)=−βe−βt\frac{d}{dt}(e^{-\beta t}) = -\beta e^{-\beta t}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the inner derivative sign when differentiating decaying exponential functions e−kte^{-kt}, resulting in a positive acceleration instead of a deceleration opposing forward motion.

REASONING PATH
Your ACEpath teacher’s suggested approach
Exponential Chain Rule
  • ddt(eu(t))=u′(t)eu(t)\frac{d}{dt}\left(e^{u(t)}\right) = u'(t) e^{u(t)}, so ddt(e−βt)=−βe−βt\frac{d}{dt}\left(e^{-\beta t}\right) = -\beta e^{-\beta t}.

  • Differentiate the entire exponent explicitly and multiply the result by the original exponential term.

Physical Reality Check
  • When speed decreases toward zero while moving in the positive direction (v>0v > 0), acceleration must be negative (a<0a < 0).

  • Verify that your calculated acceleration vector opposes the direction of motion for any braking or damping process.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Differentiate with the chain rule: a(t)=ddt(v0e−βt)=−βv0e−βta(t) = \frac{d}{dt}(v_0 e^{-\beta t}) = -\beta v_0 e^{-\beta t}.

  2. Substitute the known values β=0.125 s−1\beta = 0.125\text{ s}^{-1}, v0=25.0 m/sv_0 = 25.0\text{ m/s}, and e−βt=0.200e^{-\beta t} = 0.200: a=−(0.125)(25.0)(0.200)a = -(0.125)(25.0)(0.200).

  3. Evaluate the product: a=−0.625 m/s2a = -0.625\text{ m/s}^2.

Final answer

a=−0.625 m/s2a = -0.625\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Review derivatives of decaying exponentials, paying special attention to bringing down negative factors from the exponent.

  • Perform a physical sanity check on every kinematics problem: if an object is slowing down while moving forward, its acceleration must be negative.

OverviewACEpath Teacher's Diagnosis

02 The student uses the displacement fraction 0.80 directly as the value of the exponential term e^(-βt) instead of 1 - 0.80 = 0.20.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δx∞=∫0∞v(t) dt=v0β⟹25.00.125=200 m\Delta x_{\infty} = \int_{0}^{\infty} v(t)\,dt = \frac{v_0}{\beta} \Longrightarrow \frac{25.0}{0.125} = 200\text{ m}

  2. Step 2

    e−βt=0.80e^{-\beta t} = 0.80

    Correct

    1−e−βt=0.80⟹e−βt=0.201 - e^{-\beta t} = 0.80 \Longrightarrow e^{-\beta t} = 0.20

    The displacement at time tt is Δx(t)=Δx∞(1−e−βt)\Delta x(t) = \Delta x_{\infty}(1 - e^{-\beta t}). When displacement reaches 80.0%80.0\% of its limit, Δx(t)=0.800Δx∞\Delta x(t) = 0.800\Delta x_{\infty}, which means 1−e−βt=0.8001 - e^{-\beta t} = 0.800, so e−βt=0.200e^{-\beta t} = 0.200.

  3. Step 3

    a(t)=dvdt=−βv0e−βta(t) = \frac{dv}{dt} = -\beta v_0 e^{-\beta t}

  4. Step 4

    a=−0.125×25.0×0.80=−2.50 m/s2a = -0.125 \times 25.0 \times 0.80 = -2.50\text{ m/s}^2

    Correct

    a=−(0.125 s−1)⋅(25.0 m/s)⋅(0.200)=−0.625 m/s2a = -(0.125\text{ s}^{-1}) \cdot (25.0\text{ m/s}) \cdot (0.200) = -0.625\text{ m/s}^2

    You substituted your value of e−βte^{-\beta t} correctly into your acceleration formula, but the final numerical value is off because of the earlier error in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly integrated the decaying exponential velocity function to determine the total asymptotic displacement.

You correctly differentiated the velocity function to obtain the symbolic acceleration formula.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Complementary Fraction Misidentification in Exponential Decay

You set the exponential factor e−βte^{-\beta t} directly equal to the fraction of displacement achieved (0.800.80) rather than relating it to the remaining fraction (1−0.80=0.201 - 0.80 = 0.20).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the fraction of total displacement completed, which grows as (1−e−βt)(1 - e^{-\beta t}), with the decay factor e−βte^{-\beta t}, which measures the remaining fraction yet to be covered.

REASONING PATH
Your ACEpath teacher’s suggested approach
Connecting Position and Decay Factor
  • For a quantity approaching an asymptote via y(t)=y∞(1−e−kt)y(t) = y_{\infty}(1 - e^{-kt}), the completed fraction is y(t)y∞=1−e−kt\frac{y(t)}{y_{\infty}} = 1 - e^{-kt}.

  • Always write out the full integrated function Δx(t)=Δx∞(1−e−βt)\Delta x(t) = \Delta x_{\infty}(1 - e^{-\beta t}) and isolate e−βt=1−Δx(t)Δx∞e^{-\beta t} = 1 - \frac{\Delta x(t)}{\Delta x_{\infty}} before substituting numerical percentages.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the displacement function: Δx(t)=Δx∞(1−e−βt)\Delta x(t) = \Delta x_{\infty}(1 - e^{-\beta t})

  2. Set Δx(t)=0.800Δx∞\Delta x(t) = 0.800 \Delta x_{\infty}, which yields 1−e−βt=0.8001 - e^{-\beta t} = 0.800

  3. Solve for the exponential factor: e−βt=1−0.800=0.200e^{-\beta t} = 1 - 0.800 = 0.200

  4. Substitute e−βt=0.200e^{-\beta t} = 0.200 into the acceleration formula: a=−βv0e−βt=−(0.125)(25.0)(0.200)a = -\beta v_0 e^{-\beta t} = -(0.125)(25.0)(0.200)

Final answer

a=−0.625 m/s2a = -0.625\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • When working with bounded exponential growth toward an asymptote, explicitly write y(t)=ymax⁡(1−e−t/τ)y(t) = y_{\max}(1 - e^{-t/\tau}) to avoid equating the exponential factor directly to the completed percentage.

  • Practice solving for instantaneous velocity and acceleration at specified percentages of terminal values to build confidence with complementary factors.

OverviewACEpath Teacher's Diagnosis

03 The student misintegrates the exponential function by multiplying by β instead of dividing by β, leading to an incorrect total displacement and propagating into downstream evaluations.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δx∞=∫0∞v0e−βt dt=βv0\Delta x_{\infty} = \int_{0}^{\infty} v_0 e^{-\beta t} \, dt = \beta v_0

    Correct

    Δx∞=∫0∞v0e−βt dt=[−v0βe−βt]0∞=v0β\Delta x_{\infty} = \int_{0}^{\infty} v_0 e^{-\beta t} \, dt = \left[ -\frac{v_0}{\beta} e^{-\beta t} \right]_{0}^{\infty} = \frac{v_0}{\beta}

    When integrating an exponential function ∫ekt dt=1kekt+C\int e^{kt}\,dt = \frac{1}{k}e^{kt} + C, you divide by the coefficient of tt rather than multiply by it. Multiplication by the coefficient is the rule for differentiation.

  2. Step 2

    Δx∞=0.125×25.0=3.125 m\Delta x_{\infty} = 0.125 \times 25.0 = 3.125\text{ m}

    Correct

    Δx∞=25.0 m/s0.125 s−1=200 m\Delta x_{\infty} = \frac{25.0\text{ m/s}}{0.125\text{ s}^{-1}} = 200\text{ m}

    This numerical result was affected by the misintegration in the previous step. Dividing 25.0 m/s25.0\text{ m/s} by 0.125 s−10.125\text{ s}^{-1} yields 200 m200\text{ m}.

  3. Step 3

    Δx(t)Δx∞=1−e−βt=0.80  ⟹  e−βt=0.20\frac{\Delta x(t)}{\Delta x_{\infty}} = 1 - e^{-\beta t} = 0.80 \implies e^{-\beta t} = 0.20

  4. Step 4

    a(t)=−βv0e−βt  ⟹  a=−0.125×25.0×0.20=−0.625 m/s2a(t) = -\beta v_0 e^{-\beta t} \implies a = -0.125 \times 25.0 \times 0.20 = -0.625\text{ m/s}^2

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that displacement is the integral of velocity over time.

You recognized the algebraic form of the fractional displacement 1−e−βt1 - e^{-\beta t} to deduce the factor e−βt=0.20e^{-\beta t} = 0.20.

You accurately differentiated v(t)v(t) to find a(t)=−βv0e−βta(t) = -\beta v_0 e^{-\beta t} and evaluated the acceleration with the correct sign and units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Integration vs. differentiation of exponential functions

You applied the chain rule for derivatives (multiplying by the inner derivative −β-\beta) to an integral that requires dividing by −β-\beta.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing integration and differentiation rules for exponential terms of the form ekte^{kt}, leading to multiplying by the constant rather than dividing by it.

REASONING PATH
Your ACEpath teacher’s suggested approach
Exponential Calculus Rules
  • ddt(ekt)=kekt\frac{d}{dt}\left(e^{kt}\right) = k e^{kt}, whereas ∫ekt dt=1kekt+C\int e^{kt}\,dt = \frac{1}{k}e^{kt} + C.

  • Always verify whether you are finding a rate of change (multiply by kk) or accumulating an area (divide by kk).

Dimensional Analysis Check
  • [β]=s−1[\beta] = \text{s}^{-1} and [v0]=m/s[v_0] = \text{m/s}.

  • Check the units of your result: βv0\beta v_0 gives m/s2\text{m/s}^2 (acceleration), whereas displacement requires v0β=m/ss−1=m\frac{v_0}{\beta} = \frac{\text{m/s}}{\text{s}^{-1}} = \text{m}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Integrate v(t)=v0e−βtv(t) = v_0 e^{-\beta t} from t=0t = 0 to ∞\infty: Δx∞=[−v0βe−βt]0∞=0−(−v0β)=v0β\Delta x_{\infty} = \left[ -\frac{v_0}{\beta} e^{-\beta t} \right]_{0}^{\infty} = 0 - \left(-\frac{v_0}{\beta}\right) = \frac{v_0}{\beta}.

  2. Substitute v0=25.0 m/sv_0 = 25.0\text{ m/s} and β=0.125 s−1\beta = 0.125\text{ s}^{-1}: Δx∞=25.00.125=200 m\Delta x_{\infty} = \frac{25.0}{0.125} = 200\text{ m}.

Final answer

(a) Δx∞=200 m\Delta x_{\infty} = 200\text{ m}; (b) a=−0.625 m/s2a = -0.625\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice using dimensional analysis to catch inverted constants immediately after evaluating an integral.

  • Review the fundamental calculus pairs: differentiating multiplies by the inner linear constant, while integrating divides by it.

Lock it in

Similar question

01

A particle moves along a straight line with velocity v(t)=16.0e−0.500t m/sv(t) = 16.0 e^{-0.500 t}\text{ m/s}. Find its instantaneous acceleration at t=2.00 st = 2.00\text{ s}.

Answer

a(2.00)=−2.94 m/s2a(2.00) = -2.94\text{ m/s}^2. Differentiating gives a(t)=dvdt=−0.500(16.0)e−0.500t=−8.00e−0.500ta(t) = \frac{dv}{dt} = -0.500(16.0)e^{-0.500t} = -8.00 e^{-0.500 t}. At t=2.00 st = 2.00\text{ s}, a(2.00)=−8.00e−1.00≈−2.94 m/s2a(2.00) = -8.00 e^{-1.00} \approx -2.94\text{ m/s}^2.

02

A boat coasts to rest under water drag such that v(t)=v0e−btv(t) = v_0 e^{-b t}, where v0=10.0 m/sv_0 = 10.0\text{ m/s} and b=0.200 s−1b = 0.200\text{ s}^{-1}. Determine its instantaneous acceleration at the instant its speed has dropped to 25.0%25.0\% of its initial value.

Answer

a=−0.500 m/s2a = -0.500\text{ m/s}^2. Since a(t)=dvdt=−bv(t)a(t) = \frac{dv}{dt} = -b v(t), when v=0.250v0=2.50 m/sv = 0.250 v_0 = 2.50\text{ m/s}, the acceleration is a=−(0.200 s−1)(2.50 m/s)=−0.500 m/s2a = -(0.200\text{ s}^{-1})(2.50\text{ m/s}) = -0.500\text{ m/s}^2.

03

A mass attached to a viscous damper moves with position x(t)=xmax⁡(1−e−γt)x(t) = x_{\max}(1 - e^{-\gamma t}) with xmax⁡=5.00 mx_{\max} = 5.00\text{ m} and γ=2.00 s−1\gamma = 2.00\text{ s}^{-1}. Find the acceleration of the mass when its position reaches x=4.00 mx = 4.00\text{ m}.

Answer

a=−4.00 m/s2a = -4.00\text{ m/s}^2. First, v(t)=x˙(t)=γxmax⁡e−γtv(t) = \dot{x}(t) = \gamma x_{\max} e^{-\gamma t}. Differentiating again yields a(t)=−γ2xmax⁡e−γta(t) = -\gamma^2 x_{\max} e^{-\gamma t}. When x=4.00 mx = 4.00\text{ m}, 1−e−γt=4.005.00=0.8001 - e^{-\gamma t} = \frac{4.00}{5.00} = 0.800, so e−γt=0.200e^{-\gamma t} = 0.200. Thus, a=−(2.00)2(5.00)(0.200)=−4.00 m/s2a = -(2.00)^2 (5.00)(0.200) = -4.00\text{ m/s}^2.

Loading workspace…