Resources
In a university mechanics lab, an experimental apparatus is set up to calibrate a force transducer and verify friction laws. A polished aluminum glider of mass rests on a horizontal air track. A light, inextensible braided cord is tied to the glider, runs over an ultra-low-friction rotary motion sensor (pulley), and attaches to a vertically suspended mass hanger of mass . When the air supply is turned off, the dry track exerts friction on the glider. A digital force transducer mounted in-line with the cord measures a steady tension of while the system accelerates down the track at . Taking : (a) Draw up an exhaustive inventory identifying all contact and non-contact forces acting on (i) the glider and (ii) the hanging mass hanger. (b) Determine the magnitude of the kinetic frictional force exerted by the unpressurized track on the glider. (c) Calculate the experimental coefficient of kinetic friction between the glider and the track.
Answer and steps
Final answer
(a) (i) Glider: Gravitational force (non-contact, downward), Normal force (contact, upward), Cord tension force (contact, horizontal forward), Kinetic frictional force (contact, horizontal opposing motion). (ii) Hanging mass hanger: Gravitational force (non-contact, downward), Cord tension force (contact, upward). (b) . (c) .
Steps
Part (a): Identification of Forces Acting on Each Body
Forces can be categorized as contact forces (requiring direct physical touch) and non-contact forces (action-at-a-distance, such as gravity).
Glider ()
- Gravitational Force ():
- Type: Non-contact force.
- Direction: Vertically downward toward the center of the Earth.
- Normal Force ():
- Type: Contact force exerted by the surface of the track.
- Direction: Perpendicular to the track, vertically upward.
- Tension Force ():
- Type: Contact force exerted by the attached braided cord.
- Direction: Horizontally forward, directed toward the pulley.
- Kinetic Frictional Force ():
- Type: Contact force exerted parallel to the track surface.
- Direction: Horizontally backward, opposing the direction of motion.
(ii) Hanging Mass Hanger ()
- Gravitational Force ():
- Type: Non-contact force.
- Direction: Vertically downward.
- Tension Force ():
- Type: Contact force exerted by the cord.
- Direction: Vertically upward.
Part (b): Determining the Kinetic Frictional Force
Define the direction of motion of the glider (horizontal, toward the pulley) as the positive -direction.
According to Newton's second law of motion along the horizontal axis:
Substitute the horizontal forces acting on the glider:
Rearrange to solve for the magnitude of the kinetic friction :
Substitute the given experimental values:
Part (c): Calculating the Coefficient of Kinetic Friction
Since there is no vertical motion or acceleration of the glider ():
Calculate the normal force:
The relationship between kinetic friction and the normal force is defined by:
Substitute the values:
(Common Pitfall: Do not include the hanging mass when computing the normal force ; the normal force supports only the glider resting directly on the track.)
Typical errors
01 The student assumes the glider moves at constant velocity rather than accelerating, omitting the m*a term and equating friction directly to tension.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Glider forces: Gravity downward (non-contact), Normal force upward (contact), Tension rightward (contact), Friction leftward (contact). Hanger forces: Gravity downward (non-contact), Tension upward (contact).
- Step 2Correct
You set the net horizontal force to zero, assuming constant velocity or equilibrium. Because the system is accelerating at , Newton's second law requires .
- Step 3Correct
Your normal force calculation and friction coefficient formula are completely correct, but your numerical result was affected by substituting the incorrect value of from the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou accurately inventoried all contact and non-contact forces for both bodies.
You correctly calculated the vertical normal force on the glider as .
You correctly identified the definition of the kinetic coefficient of friction as .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated an accelerating system as if it were in static or dynamic equilibrium by setting , omitting the inertial term .
REASONING PATH
Your ACEpath teacher’s suggested approach- Check system acceleration
If a body has a non-zero acceleration , Newton's second law states , not .
Always verify whether the problem gives an acceleration before writing out the net force equations.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite Newton's second law along the horizontal axis for the glider: .
Substitute the opposing forces: .
Solve for the friction force: .
Compute the kinetic friction coefficient: .
02 The student mistakenly assumes the cord tension equals the weight of the hanging mass hanger rather than using the measured tension from the force transducer.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Glider: downward gravity (non-contact), upward normal force (contact), forward tension (contact), backward friction (contact). Hanger: downward gravity (non-contact), upward tension (contact).
- Step 2Correct
(as measured by the digital force transducer)
You calculated cord tension assuming static equilibrium (), but the hanging mass is accelerating downward at , and the problem explicitly provides the measured steady cord tension of .
- Step 3Correct
Your application of Newton's second law along the horizontal axis is algebraically correct, but substituting the incorrect tension value produced an inaccurate friction force.
- Step 4Correct
You correctly determined the normal force and correctly set up , but using propagated the error into your final coefficient.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly classified all contact and field forces for both masses.
You set up the horizontal equation of motion correctly.
You correctly calculated the normal force on the glider as .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou calculated cord tension using the static formula instead of using the directly measured transducer value .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated an accelerating connected mass as if it were in static equilibrium, overlooking both the downward acceleration () and the measured transducer reading given in the prompt.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check for Given Sensor Values
When an experimental reading is directly provided, use it rather than assuming an idealized formula.
Read the problem statement for given transducer or sensor measurements before setting up force equations.
- Accelerating Suspended Masses
For a mass accelerating downward, , which implies .
Always verify whether the hanging mass is accelerating before setting tension equal to its weight.
CORRECTED PATH
ACEpath Teacher's DemonstrationSubstitute the measured tension into Newton's second law for the horizontal glider: .
Calculate the normal force on the glider: .
Compute the kinetic friction coefficient: .
(b) ; (c)
03 The student uses the total mass of the combined system instead of only the glider's mass when calculating the normal force acting on the sliding glider.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Glider: gravity (non-contact), normal force (contact), tension (contact), kinetic friction (contact). ⟹ Hanger: gravity (non-contact), tension (contact).
- Step 2
- Step 3Correct
You combined both masses to find the normal force, but the track only supports the glider resting directly on it. The hanging mass is supported vertically by the cord tension, not by the horizontal track.
- Step 4Correct
Your formula for is correct, but your final numerical value was affected by substituting the incorrect normal force from the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly cataloged all forces and their interaction types for both objects.
You correctly set up and evaluated Newton's second law for the glider's horizontal motion to find .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the combined mass of the connected system as the mass pressing down on the horizontal contact surface, forgetting that normal force arises strictly between surfaces in direct contact.
REASONING PATH
Your ACEpath teacher’s suggested approach- Isolate the Contact Surface
A normal force is exerted perpendicular to a surface only by objects directly in contact with that surface.
Draw a free-body diagram for the sliding object alone and sum vertical forces () exclusively on that object.
CORRECTED PATH
ACEpath Teacher's DemonstrationVertical equilibrium on the horizontal glider:
Substitute glider mass:
Calculate coefficient of kinetic friction:
Lock it in
When is it valid to set instead of ?
Only when the object is at rest or moving with constant velocity (). If , you must equate net force to .
Similar question
A block slides along a rough horizontal table. A horizontal pulling force of causes the block to accelerate forward at . Taking , find: (a) the kinetic friction force , and (b) the coefficient of kinetic friction .
Answer
(a) . Using , so . (b) . Since , .
A model train car travels horizontally along a track. An engine provides a forward thrust of . The coefficient of kinetic friction between the wheels and track is . Taking , determine the acceleration of the train car.
Answer
. Normal force . Friction . Net horizontal force . Acceleration .
In a modified Atwood machine, a cart of mass on a horizontal table with friction is connected via a light cord over a pulley to a hanging mass . The measured string tension during motion is . Taking : (a) find the downward acceleration of the hanging mass, (b) find the friction force acting on the cart, and (c) calculate for the cart.
Answer
(a) . For the hanging mass: . (b) . For the cart: . (c) . .