Resources

During an acoustics demonstration, a signal generator produces a reference tone with a displacement amplitude of smax,1=4.50×10−8 ms_{\text{max}, 1} = 4.50 \times 10^{-8}\text{ m}, yielding a measured sound level of β1=65.0 dB\beta_1 = 65.0\text{ dB}. A technician turns up the volume control until the sound level increases to β2=83.0 dB\beta_2 = 83.0\text{ dB}. Assuming the frequency of the sound wave remains constant at f=1.00 kHzf = 1.00\text{ kHz} in an ambient medium with constant density and speed of sound, determine the ratio of the final pressure amplitude to the initial pressure amplitude, ΔP2ΔP1\frac{\Delta P_2}{\Delta P_1}, and solve for the final molecular displacement amplitude smax,2s_{\text{max}, 2}.

Answer and steps

Final answer

ΔP2ΔP1≈7.94\frac{\Delta P_2}{\Delta P_1} \approx 7.94; smax,2=3.57×10−7 ms_{\text{max}, 2} = 3.57 \times 10^{-7}\text{ m}.

Steps

Step 1: Relate the Change in Sound Level to Wave Intensity

The sound intensity level β\beta (in decibels) is defined as: β=10log⁡10(II0)\beta = 10 \log_{10}\left(\frac{I}{I_0}\right)

where II is the sound intensity and I0I_0 is the reference threshold intensity. The difference between the two sound levels is: Δβ=β2−β1=10log⁡10(I2I1)\Delta \beta = \beta_2 - \beta_1 = 10 \log_{10}\left(\frac{I_2}{I_1}\right)

Substitute the given values β1=65.0 dB\beta_1 = 65.0\text{ dB} and β2=83.0 dB\beta_2 = 83.0\text{ dB}: 83.0 dB−65.0 dB=18.0 dB=10log⁡10(I2I1)83.0\text{ dB} - 65.0\text{ dB} = 18.0\text{ dB} = 10 \log_{10}\left(\frac{I_2}{I_1}\right) log⁡10(I2I1)=18.010=1.80\log_{10}\left(\frac{I_2}{I_1}\right) = \frac{18.0}{10} = 1.80 I2I1=101.80≈63.1\frac{I_2}{I_1} = 10^{1.80} \approx 63.1


Step 2: Find the Ratio of Pressure Amplitudes

Sound intensity is directly proportional to the square of the pressure amplitude ΔP\Delta P: I=(ΔP)22ρvI = \frac{(\Delta P)^2}{2\rho v}

where ρ\rho is the medium density and vv is the speed of sound. Because the ambient medium remains constant, the ratio of intensities is related to the ratio of pressure amplitudes by: I2I1=(ΔP2ΔP1)2\frac{I_2}{I_1} = \left(\frac{\Delta P_2}{\Delta P_1}\right)^2

Taking the square root on both sides: ΔP2ΔP1=I2I1=101.80=100.90≈7.94\frac{\Delta P_2}{\Delta P_1} = \sqrt{\frac{I_2}{I_1}} = \sqrt{10^{1.80}} = 10^{0.90} \approx 7.94


Step 3: Relate Pressure Amplitude to Displacement Amplitude

The pressure amplitude is linked to the displacement amplitude smaxs_{\text{max}} by the relation: ΔP=ρvωsmax=2πfρvsmax\Delta P = \rho v \omega s_{\text{max}} = 2\pi f \rho v s_{\text{max}}

Since the frequency f=1.00 kHzf = 1.00\text{ kHz} and the medium parameters ρ\rho and vv are constant, pressure amplitude is directly proportional to displacement amplitude: ΔP2ΔP1=smax,2smax,1\frac{\Delta P_2}{\Delta P_1} = \frac{s_{\text{max}, 2}}{s_{\text{max}, 1}}

Therefore: smax,2smax,1≈7.94\frac{s_{\text{max}, 2}}{s_{\text{max}, 1}} \approx 7.94


Step 4: Calculate the Final Displacement Amplitude

Substitute the initial displacement amplitude smax,1=4.50×10−8 ms_{\text{max}, 1} = 4.50 \times 10^{-8}\text{ m}: smax,2=7.943⋅smax,1=7.943⋅(4.50×10−8 m)≈3.57×10−7 ms_{\text{max}, 2} = 7.943 \cdot s_{\text{max}, 1} = 7.943 \cdot (4.50 \times 10^{-8}\text{ m}) \approx 3.57 \times 10^{-7}\text{ m}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that intensity is proportional to the square of pressure amplitude, directly equating the pressure amplitude ratio to the intensity ratio.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δβ=β2−β1=83.0 dB−65.0 dB=18.0 dB\Delta\beta = \beta_2 - \beta_1 = 83.0\text{ dB} - 65.0\text{ dB} = 18.0\text{ dB}

  2. Step 2

    18.0=10log⁡10(ΔP2ΔP1)  ⟹  log⁡10(ΔP2ΔP1)=1.8  ⟹  ΔP2ΔP1=101.8≈63.118.0 = 10 \log_{10}\left(\frac{\Delta P_2}{\Delta P_1}\right) \implies \log_{10}\left(\frac{\Delta P_2}{\Delta P_1}\right) = 1.8 \implies \frac{\Delta P_2}{\Delta P_1} = 10^{1.8} \approx 63.1

    Correct

    Δβ=10log⁡10(I2I1)=10log⁡10(ΔP2ΔP1)2=20log⁡10(ΔP2ΔP1)  ⟹  ΔP2ΔP1=101.8/2=100.90≈7.94\Delta\beta = 10\log_{10}\left(\frac{I_2}{I_1}\right) = 10\log_{10}\left(\frac{\Delta P_2}{\Delta P_1}\right)^2 = 20\log_{10}\left(\frac{\Delta P_2}{\Delta P_1}\right) \implies \frac{\Delta P_2}{\Delta P_1} = 10^{1.8/2} = 10^{0.90} \approx 7.94

    Sound intensity II is proportional to (ΔP)2(\Delta P)^2, not to ΔP\Delta P. Therefore, I2I1=(ΔP2ΔP1)2\frac{I_2}{I_1} = \left(\frac{\Delta P_2}{\Delta P_1}\right)^2, which leads to ΔP2ΔP1=101.8≈7.94\frac{\Delta P_2}{\Delta P_1} = \sqrt{10^{1.8}} \approx 7.94.

  3. Step 3

    smax,2smax,1=ΔP2ΔP1=63.1  ⟹  smax,2=63.096×4.50×10−8 m=2.84×10−6 m\frac{s_{\text{max}, 2}}{s_{\text{max}, 1}} = \frac{\Delta P_2}{\Delta P_1} = 63.1 \implies s_{\text{max}, 2} = 63.096 \times 4.50 \times 10^{-8}\text{ m} = 2.84 \times 10^{-6}\text{ m}

    Correct

    smax,2smax,1=ΔP2ΔP1≈7.94  ⟹  smax,2=7.943×4.50×10−8 m≈3.57×10−7 m\frac{s_{\text{max}, 2}}{s_{\text{max}, 1}} = \frac{\Delta P_2}{\Delta P_1} \approx 7.94 \implies s_{\text{max}, 2} = 7.943 \times 4.50 \times 10^{-8}\text{ m} \approx 3.57 \times 10^{-7}\text{ m}

    Your reasoning that displacement amplitude is directly proportional to pressure amplitude was correct, but your calculated displacement was thrown off by the incorrect ratio from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately found the difference in sound level Δβ=18.0 dB\Delta\beta = 18.0\text{ dB}.

You correctly identified the linear proportional relationship between molecular displacement amplitude and pressure amplitude.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Decibel definition confused intensity with amplitude

You substituted the ratio of pressure amplitudes directly into the 10log⁡1010\log_{10} decibel formula instead of using the ratio of wave intensities.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing wave intensity (energy flux per unit area, proportional to the square of amplitude) with wave amplitude (pressure or displacement) when calculating decibels.

REASONING PATH
Your ACEpath teacher’s suggested approach
Decibels with Intensities vs. Amplitudes
  • Sound level in decibels is defined in terms of intensity: β=10log⁡10(I/I0)\beta = 10\log_{10}(I/I_0). Since I∝(ΔP)2∝smax2I \propto (\Delta P)^2 \propto s_{\text{max}}^2, writing decibels directly in terms of amplitude requires a factor of 2020: Δβ=20log⁡10(ΔP2/ΔP1)\Delta\beta = 20\log_{10}(\Delta P_2 / \Delta P_1).

  • Whenever working with pressure amplitude ΔP\Delta P or displacement amplitude smaxs_{\text{max}}, remember to either solve for intensity ratio first (I2/I1=10Δβ/10I_2/I_1 = 10^{\Delta\beta/10}) and take the square root, or use 20log⁡10(amplitude ratio)20\log_{10}(\text{amplitude ratio}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the decibel relation using intensity: Δβ=10log⁡10(I2I1)=18.0 dB\Delta \beta = 10\log_{10}\left(\frac{I_2}{I_1}\right) = 18.0\text{ dB}, which gives I2I1=101.80≈63.1\frac{I_2}{I_1} = 10^{1.80} \approx 63.1.

  2. Relate intensity to pressure amplitude: I2I1=(ΔP2ΔP1)2\frac{I_2}{I_1} = \left(\frac{\Delta P_2}{\Delta P_1}\right)^2, so ΔP2ΔP1=63.1=100.90≈7.94\frac{\Delta P_2}{\Delta P_1} = \sqrt{63.1} = 10^{0.90} \approx 7.94.

  3. Use the linear relation between pressure amplitude and displacement amplitude: smax,2=(ΔP2ΔP1)smax,1=7.943×(4.50×10−8 m)≈3.57×10−7 ms_{\text{max}, 2} = \left(\frac{\Delta P_2}{\Delta P_1}\right) s_{\text{max}, 1} = 7.943 \times (4.50 \times 10^{-8}\text{ m}) \approx 3.57 \times 10^{-7}\text{ m}.

Final answer

ΔP2ΔP1≈7.94\frac{\Delta P_2}{\Delta P_1} \approx 7.94, smax,2≈3.57×10−7 ms_{\text{max}, 2} \approx 3.57 \times 10^{-7}\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the relationships between acoustic power/intensity and field variables like pressure amplitude (I=(ΔP)22ρvI = \frac{(\Delta P)^2}{2\rho v}).

  • Practice converting sound level changes into both intensity ratios and amplitude ratios to cement the difference between the factor of 1010 and the factor of 2020.

OverviewACEpath Teacher's Diagnosis

02 The student treats the decibel difference as a direct linear multiplier rather than a logarithmic ratio.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δβ=83.0−65.0=18.0 dB\Delta \beta = 83.0 - 65.0 = 18.0\text{ dB}

  2. Step 2

    ΔP2ΔP1=1.277=1.28\frac{\Delta P_2}{\Delta P_1} = 1.277 = 1.28

    Correct

    Δβ=20log⁡10(ΔP2ΔP1)  ⟹  ΔP2ΔP1=1018.020=100.90≈7.94\Delta \beta = 20 \log_{10}\left(\frac{\Delta P_2}{\Delta P_1}\right) \implies \frac{\Delta P_2}{\Delta P_1} = 10^{\frac{18.0}{20}} = 10^{0.90} \approx 7.94

    You calculated the direct ratio of sound levels 83.0 dB65.0 dB≈1.28\frac{83.0\text{ dB}}{65.0\text{ dB}} \approx 1.28. Decibels are logarithmic: an increase of Δβ=18.0 dB\Delta \beta = 18.0\text{ dB} corresponds to an intensity ratio of I2I1=101.80≈63.1\frac{I_2}{I_1} = 10^{1.80} \approx 63.1, which yields a pressure amplitude ratio of 63.1=100.90≈7.94\sqrt{63.1} = 10^{0.90} \approx 7.94.

  3. Step 3

    smax,2=1.277×4.50×10−8 m=5.75×10−8 ms_{\text{max}, 2} = 1.277 \times 4.50 \times 10^{-8}\text{ m} = 5.75 \times 10^{-8}\text{ m}

    Correct

    smax,2=(ΔP2ΔP1)smax,1=7.943×(4.50×10−8 m)≈3.57×10−7 ms_{\text{max}, 2} = \left(\frac{\Delta P_2}{\Delta P_1}\right) s_{\text{max}, 1} = 7.943 \times (4.50 \times 10^{-8}\text{ m}) \approx 3.57 \times 10^{-7}\text{ m}

    Your reasoning that displacement amplitude scales linearly with pressure amplitude is correct, but your final value is affected by the incorrect amplitude ratio from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the difference in sound level as Δβ=18.0 dB\Delta \beta = 18.0\text{ dB}.

You correctly applied linear scaling between pressure amplitude and molecular displacement amplitude.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear treatment of logarithmic decibel scale

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated decibel values as a linear physical quantity by calculating β2β1\frac{\beta_2}{\beta_1} instead of converting the decibel difference Δβ\Delta \beta into an intensity or amplitude ratio using the base-10 logarithmic definition Δβ=10log⁡10(I2I1)=20log⁡10(ΔP2ΔP1)\Delta \beta = 10 \log_{10}\left(\frac{I_2}{I_1}\right) = 20 \log_{10}\left(\frac{\Delta P_2}{\Delta P_1}\right).

REASONING PATH
Your ACEpath teacher’s suggested approach
Decibels relate to differences, not direct ratios
  • Never compute β2β1\frac{\beta_2}{\beta_1}. A change in decibel level is always a difference: Δβ=β2−β1\Delta \beta = \beta_2 - \beta_1.

  • Calculate Δβ=β2−β1\Delta \beta = \beta_2 - \beta_1 first, then use it as an exponent in 10Δβ/1010^{\Delta \beta / 10} or 10Δβ/2010^{\Delta \beta / 20}.

Power vs. Amplitude exponent in decibels
  • Because intensity scales with amplitude squared (I∝(ΔP)2I \propto (\Delta P)^2), Δβ=10log⁡10(I2I1)=20log⁡10(ΔP2ΔP1)\Delta \beta = 10 \log_{10}\left(\frac{I_2}{I_1}\right) = 20 \log_{10}\left(\frac{\Delta P_2}{\Delta P_1}\right).

  • To find an amplitude ratio directly from Δβ\Delta \beta, divide Δβ\Delta \beta by 2020 before raising 1010 to that power: ΔP2ΔP1=10Δβ/20\frac{\Delta P_2}{\Delta P_1} = 10^{\Delta \beta / 20}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the sound level difference Δβ=18.0 dB\Delta \beta = 18.0\text{ dB} to find the intensity ratio: I2I1=1018.010=101.80≈63.10\frac{I_2}{I_1} = 10^{\frac{18.0}{10}} = 10^{1.80} \approx 63.10.

  2. Relate intensity to pressure amplitude (I∝(ΔP)2I \propto (\Delta P)^2) to find the pressure amplitude ratio: ΔP2ΔP1=I2I1=100.90≈7.943\frac{\Delta P_2}{\Delta P_1} = \sqrt{\frac{I_2}{I_1}} = 10^{0.90} \approx 7.943.

  3. Multiply the initial displacement amplitude by this ratio (smax∝ΔPs_{\text{max}} \propto \Delta P): smax,2=7.943×(4.50×10−8 m)≈3.57×10−7 ms_{\text{max}, 2} = 7.943 \times (4.50 \times 10^{-8}\text{ m}) \approx 3.57 \times 10^{-7}\text{ m}.

Final answer

ΔP2ΔP1≈7.94\frac{\Delta P_2}{\Delta P_1} \approx 7.94; smax,2=3.57×10−7 ms_{\text{max}, 2} = 3.57 \times 10^{-7}\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the logarithmic definition of sound level β=10log⁡10(I/I0)\beta = 10 \log_{10}(I/I_0) and practice extracting intensity ratios from Δβ\Delta \beta.

  • Memorize the direct shortcut for wave amplitudes: an increase of +20 dB+20\text{ dB} corresponds to a factor of 1010 in amplitude (ΔP\Delta P and smaxs_{\text{max}}).

  • Solve the follow-up practice problems to reinforce converting between decibel changes, intensity ratios, and amplitude ratios.

OverviewACEpath Teacher's Diagnosis

03 The student misremembers the relationship between intensity and displacement amplitude, assuming displacement amplitude is proportional to intensity squared.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δβ=83.0 dB−65.0 dB=18.0 dB  ⟹  I2I1=1018.0/10=101.8≈63.1\Delta \beta = 83.0\text{ dB} - 65.0\text{ dB} = 18.0\text{ dB} \implies \frac{I_2}{I_1} = 10^{18.0/10} = 10^{1.8} \approx 63.1

  2. Step 2

    ΔP2ΔP1=I2I1=63.1≈7.94\frac{\Delta P_2}{\Delta P_1} = \sqrt{\frac{I_2}{I_1}} = \sqrt{63.1} \approx 7.94

  3. Step 3

    smax,2smax,1=(I2I1)2=3981.6\frac{s_{\text{max}, 2}}{s_{\text{max}, 1}} = \left(\frac{I_2}{I_1}\right)^2 = 3981.6

    Correct

    smax,2smax,1=ΔP2ΔP1=I2I1≈7.94\frac{s_{\text{max}, 2}}{s_{\text{max}, 1}} = \frac{\Delta P_2}{\Delta P_1} = \sqrt{\frac{I_2}{I_1}} \approx 7.94

    You squared the intensity ratio instead of taking its square root. Since sound intensity scales with the square of the displacement amplitude, I=12ρvω2smax2I = \frac{1}{2}\rho v \omega^2 s_{\text{max}}^2, the displacement amplitude is directly proportional to pressure amplitude, meaning smax,2smax,1=ΔP2ΔP1=I2I1≈7.94\frac{s_{\text{max}, 2}}{s_{\text{max}, 1}} = \frac{\Delta P_2}{\Delta P_1} = \sqrt{\frac{I_2}{I_1}} \approx 7.94.

  4. Step 4

    smax,2=3981.6×4.50×10−8 m=1.79×10−4 ms_{\text{max}, 2} = 3981.6 \times 4.50 \times 10^{-8}\text{ m} = 1.79 \times 10^{-4}\text{ m}

    Correct

    smax,2=7.943×4.50×10−8 m≈3.57×10−7 ms_{\text{max}, 2} = 7.943 \times 4.50 \times 10^{-8}\text{ m} \approx 3.57 \times 10^{-7}\text{ m}

    Your final calculation followed your incorrect amplitude ratio from Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the decibel difference formula Δβ=10log⁡10(I2/I1)\Delta \beta = 10 \log_{10}(I_2/I_1) to find the intensity ratio.

You correctly related wave intensity to pressure amplitude using I∝(ΔP)2I \propto (\Delta P)^2 to find ΔP2ΔP1≈7.94\frac{\Delta P_2}{\Delta P_1} \approx 7.94.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Amplitude-Intensity Scaling Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the quadratic power relationship between intensity and wave amplitude by setting smax∝I2s_{\text{max}} \propto I^2 rather than I∝smax2I \propto s_{\text{max}}^2 (or equivalently ΔP=ρvωsmax\Delta P = \rho v \omega s_{\text{max}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Intensity-Amplitude Scaling
  • Sound wave intensity is proportional to the square of both pressure amplitude and displacement amplitude: I∝(ΔP)2∝smax2I \propto (\Delta P)^2 \propto s_{\text{max}}^2.

  • Always take the square root of the intensity ratio when solving for any wave amplitude ratio: smax,2smax,1=I2I1=ΔP2ΔP1\frac{s_{\text{max}, 2}}{s_{\text{max}, 1}} = \sqrt{\frac{I_2}{I_1}} = \frac{\Delta P_2}{\Delta P_1}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the linear relation between pressure amplitude and displacement amplitude: ΔP=ρv(2πf)smax\Delta P = \rho v (2\pi f) s_{\text{max}}.

  2. Because medium properties and wave frequency are constant, smax,2smax,1=ΔP2ΔP1≈7.943\frac{s_{\text{max}, 2}}{s_{\text{max}, 1}} = \frac{\Delta P_2}{\Delta P_1} \approx 7.943.

  3. Calculate the final displacement amplitude: smax,2=7.943×(4.50×10−8 m)≈3.57×10−7 ms_{\text{max}, 2} = 7.943 \times (4.50 \times 10^{-8}\text{ m}) \approx 3.57 \times 10^{-7}\text{ m}.

Final answer

ΔP2ΔP1≈7.94\frac{\Delta P_2}{\Delta P_1} \approx 7.94; smax,2≈3.57×10−7 ms_{\text{max}, 2} \approx 3.57 \times 10^{-7}\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the acoustic wave equations relating intensity, pressure amplitude, and displacement amplitude.

  • Practice identifying whether a requested quantity is an energy/intensity measure (squared amplitude) or a field amplitude (linear displacement or pressure).

Lock it in

Similar question

01

A sound level increases by 6.0 dB6.0\text{ dB}. Assuming constant medium properties and frequency, find the ratio of the new displacement amplitude to the initial displacement amplitude (smax,2/smax,1s_{\text{max}, 2}/s_{\text{max}, 1}).

Answer

smax,2smax,1≈2.0\frac{s_{\text{max}, 2}}{s_{\text{max}, 1}} \approx 2.0. Step: Δβ=20log⁡10(smax,2smax,1)=6.0 dB  ⟹  smax,2smax,1=106.0/20=100.30≈2.00\Delta\beta = 20\log_{10}\left(\frac{s_{\text{max}, 2}}{s_{\text{max}, 1}}\right) = 6.0\text{ dB} \implies \frac{s_{\text{max}, 2}}{s_{\text{max}, 1}} = 10^{6.0/20} = 10^{0.30} \approx 2.00.

02

An ultrasound transducer operating at fixed frequency increases its acoustic power output such that the pressure amplitude doubles (ΔP2/ΔP1=2\Delta P_2 / \Delta P_1 = 2). What is the change in sound level Δβ\Delta \beta in decibels?

Answer

Δβ≈+6.02 dB\Delta\beta \approx +6.02\text{ dB}. Step: I2I1=(ΔP2ΔP1)2=22=4\frac{I_2}{I_1} = \left(\frac{\Delta P_2}{\Delta P_1}\right)^2 = 2^2 = 4. Then Δβ=10log⁡10(4)=20log⁡10(2)≈6.02 dB\Delta\beta = 10\log_{10}(4) = 20\log_{10}(2) \approx 6.02\text{ dB}.

03

A loudspeaker tone has an initial sound level of 70.0 dB70.0\text{ dB} with displacement amplitude smax,1=1.20×10−7 ms_{\text{max}, 1} = 1.20\times 10^{-7}\text{ m}. If the sound level is adjusted to 85.0 dB85.0\text{ dB} at constant frequency and medium, calculate the new displacement amplitude smax,2s_{\text{max}, 2}.

Answer

smax,2≈6.75×10−7 ms_{\text{max}, 2} \approx 6.75 \times 10^{-7}\text{ m}. Steps: Δβ=85.0−70.0=15.0 dB\Delta\beta = 85.0 - 70.0 = 15.0\text{ dB}. The amplitude ratio is smax,2smax,1=1015.0/20=100.75≈5.623\frac{s_{\text{max}, 2}}{s_{\text{max}, 1}} = 10^{15.0/20} = 10^{0.75} \approx 5.623. Thus, smax,2=5.623×(1.20×10−7 m)≈6.75×10−7 ms_{\text{max}, 2} = 5.623 \times (1.20 \times 10^{-7}\text{ m}) \approx 6.75 \times 10^{-7}\text{ m}.

Loading workspace…