Resources

A flat interior surface of area A=0.0350 m2A = 0.0350\text{ m}^2 lies in the yzyz-plane of a Cartesian coordinate system with its unit normal vector directed along +i^+\hat{i}. An ideal gas of molecular mass m=4.65×10−26 kgm = 4.65 \times 10^{-26}\text{ kg} has a uniform particle number density of nV=3.50×1025 particles/m3n_V = 3.50 \times 10^{25}\text{ particles/m}^3. In the microscopic kinetic derivation of pressure, molecules approach the wall with velocity component vx>0v_x > 0 and undergo elastic specular reflection such that the change in momentum is Δpx=px,final−px,initial=−2mvx\Delta p_x = p_{x,\text{final}} - p_{x,\text{initial}} = -2mv_x. Assuming the mean velocity magnitude along the normal axis for particles moving toward the wall is v‾x=320 m/s\overline{v}_x = 320\text{ m/s}, calculate: (a) the net vector force F⃗gas→wall\vec{F}_{\text{gas}\to\text{wall}} exerted by the microscopic particle impacts on this surface in terms of standard coordinate signs and unit vectors, and (b) the resulting macroscopic scalar pressure PP.

Answer and steps

Final answer

(a) F⃗gas→wall=+5.83×103 i^ N\vec{F}_{\text{gas}\to\text{wall}} = +5.83 \times 10^3\,\hat{i}\text{ N}, (b) P=1.67×105 PaP = 1.67 \times 10^5\text{ Pa}

Steps

01

Determine the Collision Rate with the Surface

Consider the wall in the yzyz-plane with its outward normal pointing in the +i^+\hat{i} direction. In an isotropic gas, molecules move in all directions with equal probability. Therefore, only half of the particles have a velocity component directed toward the wall (vx>0v_x > 0):

nx,+=12nVn_{x,+} = \frac{1}{2} n_V

In a time interval Δt\Delta t, all particles with mean normal speed v‾x\overline{v}_x located within a volume of length v‾xΔt\overline{v}_x \Delta t and cross-sectional area AA will strike the wall. The total number of collisions ΔN\Delta N during this time is:

ΔN=nx,+(A⋅v‾xΔt)=12nVAv‾xΔt\Delta N = n_{x,+} (A \cdot \overline{v}_x \Delta t) = \frac{1}{2} n_V A \overline{v}_x \Delta t


02

Determine Momentum Transferred per Collision

Each molecule arrives with initial momentum +mv‾x i^+m\overline{v}_x\,\hat{i} and reflects elastically with final momentum −mv‾x i^-m\overline{v}_x\,\hat{i}. The change in momentum of a single particle is:

Δp⃗molecule=−2mv‾x i^\Delta \vec{p}_{\text{molecule}} = -2m\overline{v}_x\,\hat{i}

By Newton's third law, the momentum transferred (impulse) to the wall per collision is equal in magnitude and opposite in sign:

J⃗wall=+2mv‾x i^\vec{J}_{\text{wall}} = +2m\overline{v}_x\,\hat{i}

(Pitfall note: A common mistake is to use mv‾xm\overline{v}_x instead of 2mv‾x2m\overline{v}_x. Because the particle bounces back elastically, the wall must provide enough impulse to both stop the incoming molecule and accelerate it in the reverse direction.)


03

Calculate the Net Force Vector F⃗gas→wall\vec{F}_{\text{gas}\to\text{wall}}

The average force exerted by the colliding particles is the total impulse delivered divided by the elapsed time:

F⃗gas→wall=ΔN⋅J⃗wallΔt=(12nVAv‾xΔt)(2mv‾x i^)Δt=nVmAv‾x2 i^\vec{F}_{\text{gas}\to\text{wall}} = \frac{\Delta N \cdot \vec{J}_{\text{wall}}}{\Delta t} = \frac{\left(\frac{1}{2} n_V A \overline{v}_x \Delta t\right)(2m\overline{v}_x\,\hat{i})}{\Delta t} = n_V m A \overline{v}_x^2\,\hat{i}

Substitute the given numerical values:

  • nV=3.50×1025 m−3n_V = 3.50 \times 10^{25}\text{ m}^{-3}
  • m=4.65×10−26 kgm = 4.65 \times 10^{-26}\text{ kg}
  • A=0.0350 m2A = 0.0350\text{ m}^2
  • v‾x=320 m/s\overline{v}_x = 320\text{ m/s}

F⃗gas→wall=(3.50×1025 m−3)(4.65×10−26 kg)(0.0350 m2)(320 m/s)2 i^\vec{F}_{\text{gas}\to\text{wall}} = (3.50 \times 10^{25}\text{ m}^{-3})(4.65 \times 10^{-26}\text{ kg})(0.0350\text{ m}^2)(320\text{ m/s})^2\,\hat{i}

F⃗gas→wall=(1.6275 kg/m3)(0.0350 m2)(102400 m2/s2) i^=+5832.96 i^ N≈+5.83×103 i^ N\vec{F}_{\text{gas}\to\text{wall}} = (1.6275\text{ kg/m}^3)(0.0350\text{ m}^2)(102400\text{ m}^2/\text{s}^2)\,\hat{i} = +5832.96\,\hat{i}\text{ N} \approx +5.83 \times 10^3\,\hat{i}\text{ N}


04

Calculate the Macroscopic Scalar Pressure PP

Pressure is the magnitude of normal force per unit area:

P=∣F⃗gas→wall∣A=nVmv‾x2P = \frac{|\vec{F}_{\text{gas}\to\text{wall}}|}{A} = n_V m \overline{v}_x^2

P=5832.96 N0.0350 m2≈1.67×105 PaP = \frac{5832.96\text{ N}}{0.0350\text{ m}^2} \approx 1.67 \times 10^5\text{ Pa}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that only half of the total number density of particles has a velocity directed toward the wall, omitting the factor of 1/2 in the collision rate and doubling both the force and pressure.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    NimpactsΔt=nV⋅A⋅vx\frac{N_{\text{impacts}}}{\Delta t} = n_V \cdot A \cdot v_x

    Correct

    NimpactsΔt=12nVAv‾x\frac{N_{\text{impacts}}}{\Delta t} = \frac{1}{2} n_V A \overline{v}_x

    In an isotropic gas, molecules move in all directions with equal probability. Because the wall is on one side, only the half of the particles with vx>0v_x > 0 move toward the wall, requiring a factor of 12\frac{1}{2}.

  2. Step 2

    Δpwall=2⋅m⋅vx\Delta p_{\text{wall}} = 2 \cdot m \cdot v_x

  3. Step 3

    F=(nV⋅A⋅vx)⋅(2⋅m⋅vx)⋅i^=2⋅nV⋅m⋅A⋅vx2⋅i^  ⟹  F=2⋅(3.50×1025)⋅(4.65×10−26)⋅0.0350⋅3202⋅i^  ⟹  F=11673.6 N⋅i^F = (n_V \cdot A \cdot v_x) \cdot (2 \cdot m \cdot v_x) \cdot \hat{i} = 2 \cdot n_V \cdot m \cdot A \cdot v_x^2 \cdot \hat{i} \implies F = 2 \cdot (3.50 \times 10^{25}) \cdot (4.65 \times 10^{-26}) \cdot 0.0350 \cdot 320^2 \cdot \hat{i} \implies F = 11673.6\text{ N} \cdot \hat{i}

    Correct

    F⃗=(12nVAv‾x)(2mv‾x)i^=nVmAv‾x2i^≈+5.83×103i^ N\vec{F} = \left(\frac{1}{2} n_V A \overline{v}_x\right)(2 m \overline{v}_x)\hat{i} = n_V m A \overline{v}_x^2 \hat{i} \approx +5.83 \times 10^3 \hat{i}\text{ N}

    Your vector notation and numerical evaluation followed logically from your collision rate, but your result is doubled because the collision rate was missing the factor of 12\frac{1}{2}.

  4. Step 4

    P=∣F∣A=11673.60.0350  ⟹  P=3.34×105 PaP = \frac{|F|}{A} = \frac{11673.6}{0.0350} \implies P = 3.34 \times 10^5\text{ Pa}

    Correct

    P=∣F⃗∣A=5832.96 N0.0350 m2≈1.67×105 PaP = \frac{|\vec{F}|}{A} = \frac{5832.96\text{ N}}{0.0350\text{ m}^2} \approx 1.67 \times 10^5\text{ Pa}

    You correctly defined scalar pressure as force divided by area, but the numerical answer inherits the factor-of-two error from the previous steps.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that elastic reflection reverses momentum, transferring an impulse of 2mv‾x2m\overline{v}_x to the surface per collision.

You set up the relationship between the rate of impacts, impulse, net force, and pressure cleanly with proper units and vector direction.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of the directional velocity fraction in collision rate

You used the total number density nVn_V instead of the directional number density nx,+=12nVn_{x,+} = \frac{1}{2}n_V when counting collisions per unit time.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In microscopic kinetic theory, all particles within the collision cylinder have velocity components along the collision axis, but exactly half have vx>0v_x > 0 (moving toward the wall) and the other half have vx<0v_x < 0 (moving away from the wall). Forgetting to restrict the density to particles approaching the boundary doubles the collision flux.

REASONING PATH
Your ACEpath teacher’s suggested approach
Directional Fraction in Kinetic Flux
  • Only particles with a velocity vector pointing toward a boundary can strike it within time Δt\Delta t.

  • Always check whether the problem specifies total number density nVn_V or forward-moving number density; if nVn_V is the total isotropic density, multiply the flux cylinder volume by 12\frac{1}{2}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply the total collision cylinder volume Av‾xΔtA \overline{v}_x \Delta t by 12nV\frac{1}{2} n_V to account for only the particles moving toward the wall.

  2. Compute the average force: F⃗=ΔN⋅J⃗Δt=(12nVAv‾x)(2mv‾x)i^=nVmAv‾x2i^\vec{F} = \frac{\Delta N \cdot \vec{J}}{\Delta t} = \left(\frac{1}{2} n_V A \overline{v}_x\right)(2 m \overline{v}_x)\hat{i} = n_V m A \overline{v}_x^2 \hat{i}.

  3. Substitute the given numbers: F⃗=(3.50×1025)(4.65×10−26)(0.0350)(320)2i^≈+5.83×103i^ N\vec{F} = (3.50 \times 10^{25})(4.65 \times 10^{-26})(0.0350)(320)^2 \hat{i} \approx +5.83 \times 10^3 \hat{i}\text{ N}.

  4. Calculate the scalar pressure: P=∣F⃗∣A=5832.96 N0.0350 m2≈1.67×105 PaP = \frac{|\vec{F}|}{A} = \frac{5832.96\text{ N}}{0.0350\text{ m}^2} \approx 1.67 \times 10^5\text{ Pa}.

Final answer

(a) F⃗gas→wall=+5.83×103 i^ N\vec{F}_{\text{gas}\to\text{wall}} = +5.83 \times 10^3\,\hat{i}\text{ N}, (b) P=1.67×105 PaP = 1.67 \times 10^5\text{ Pa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the collision-cylinder derivation in kinetic theory and note where the directional factor 12\frac{1}{2} enters.

  • Solve a practice problem finding particle effusion rate through a small hole to reinforce the distinction between total density and directional flux.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the direction of the force exerted on the wall with the force exerted on the gas molecules, giving a negative sign along the -i direction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Rate=(12)nVAvx\text{Rate} = \left(\frac{1}{2}\right) n_V A v_x

  2. Step 2

    Δpx=−2mvx  ⟹  F⃗=(12nVAvx)(−2mvx)i^=−nVmAvx2i^\Delta p_x = -2mv_x \implies \vec{F} = \left(\frac{1}{2} n_V A v_x\right)(-2mv_x)\hat{i} = -n_V m A v_x^2 \hat{i}

    Correct

    J⃗wall=−Δp⃗molecule=+2mv‾xi^  ⟹  F⃗gas→wall=+nVmAv‾x2i^\vec{J}_{\text{wall}} = -\Delta \vec{p}_{\text{molecule}} = +2m\overline{v}_x\hat{i} \implies \vec{F}_{\text{gas}\to\text{wall}} = +n_V m A \overline{v}_x^2 \hat{i}

    The value Δp⃗x=−2mvxi^\Delta \vec{p}_x = -2mv_x\hat{i} represents the change in momentum of an individual gas molecule. By Newton's third law, the impulse imparted to the wall is equal and opposite, J⃗wall=+2mvxi^\vec{J}_{\text{wall}} = +2mv_x\hat{i}, which means the force exerted by the gas on the wall points in the positive normal direction (+i^+\hat{i}).

  3. Step 3

    F⃗=−(3.50×1025)(4.65×10−26)(0.0350)(3202)i^=−5836.8i^ N\vec{F} = -(3.50 \times 10^{25})(4.65 \times 10^{-26})(0.0350)(320^2)\hat{i} = -5836.8\hat{i}\text{ N}

    Correct

    F⃗gas→wall=+(3.50×1025)(4.65×10−26)(0.0350)(3202)i^≈+5.83×103i^ N\vec{F}_{\text{gas}\to\text{wall}} = +(3.50 \times 10^{25})(4.65 \times 10^{-26})(0.0350)(320^2)\hat{i} \approx +5.83 \times 10^3\hat{i}\text{ N}

    Your numerical substitution followed your formula consistently, but the result retained the incorrect negative sign from the previous step.

  4. Step 4

    P=∣F⃗∣A=5836.80.0350=1.67×105 PaP = \frac{|\vec{F}|}{A} = \frac{5836.8}{0.0350} = 1.67 \times 10^5\text{ Pa}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that only half of the particles are moving toward the surface at any instant.

You properly applied the relationship between collision frequency, impulse, and average force.

You successfully calculated the scalar pressure as normal force per unit area.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Newton's Third Law Sign Inversion in Kinetic Impulse

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You equated the force exerted on the wall directly to the momentum change of the gas molecule instead of recognizing that the wall receives an equal and opposite impulse (−Δp⃗molecule-\Delta \vec{p}_{\text{molecule}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Which Object Experiences the Force
  • F⃗A→B=−F⃗B→A\vec{F}_{A \to B} = -\vec{F}_{B \to A} by Newton's third law.

  • When deriving wall pressure, explicitly state J⃗wall=−Δp⃗molecule=+2mv‾xn^\vec{J}_{\text{wall}} = -\Delta \vec{p}_{\text{molecule}} = +2m\overline{v}_x\hat{n} before computing the average force.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the impulse transferred to the wall per elastic impact: J⃗wall=−Δp⃗molecule=−(−2mv‾xi^)=+2mv‾xi^\vec{J}_{\text{wall}} = -\Delta \vec{p}_{\text{molecule}} = -(-2m\overline{v}_x\hat{i}) = +2m\overline{v}_x\hat{i}.

  2. Multiply the collision rate by the impulse delivered to the wall: F⃗gas→wall=(12nVAv‾x)(+2mv‾xi^)=+nVmAv‾x2i^\vec{F}_{\text{gas}\to\text{wall}} = \left(\frac{1}{2} n_V A \overline{v}_x\right)(+2m\overline{v}_x\hat{i}) = +n_V m A \overline{v}_x^2\hat{i}.

  3. Substitute the given values: F⃗gas→wall=(3.50×1025)(4.65×10−26)(0.0350)(3202)i^=+5832.96i^ N≈+5.83×103i^ N\vec{F}_{\text{gas}\to\text{wall}} = (3.50 \times 10^{25})(4.65 \times 10^{-26})(0.0350)(320^2)\hat{i} = +5832.96\hat{i}\text{ N} \approx +5.83 \times 10^3\hat{i}\text{ N}.

Final answer

(a) F⃗gas→wall=+5.83×103i^ N\vec{F}_{\text{gas}\to\text{wall}} = +5.83 \times 10^3\hat{i}\text{ N}, (b) P=1.67×105 PaP = 1.67 \times 10^5\text{ Pa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out both Δp⃗particle\Delta \vec{p}_{\text{particle}} and J⃗wall=−Δp⃗particle\vec{J}_{\text{wall}} = -\Delta \vec{p}_{\text{particle}} explicitly to prevent sign confusion.

  • Perform a physical sanity check on vector forces: an enclosed gas must push outward against confining walls, never pull them inward.

OverviewACEpath Teacher's Diagnosis

03 The student treats the collision as an inelastic sticking collision rather than an elastic reflection, using Δp = m * v_x instead of 2 * m * v_x, resulting in half the actual force and pressure.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Rate=(12)⋅nV⋅A⋅vx\text{Rate} = \left(\frac{1}{2}\right) \cdot n_V \cdot A \cdot v_x

  2. Step 2

    Δptransferred=m⋅vx\Delta p_{\text{transferred}} = m \cdot v_x

    Correct

    Δptransferred=2mv‾x\Delta p_{\text{transferred}} = 2 m \overline{v}_x

    In an elastic specular reflection, the particle reverses direction from +mvx+m v_x to −mvx-m v_x. By Newton's third law, the impulse transferred to the wall is +2mvx+2 m v_x, not mvxm v_x.

  3. Step 3

    F=(12)⋅nV⋅m⋅A⋅vx2⋅i^=0.5⋅(3.50×1025)⋅(4.65×10−26)⋅0.0350⋅3202⋅i^=2918.4 N⋅i^F = \left(\frac{1}{2}\right) \cdot n_V \cdot m \cdot A \cdot v_x^2 \cdot \hat{i} = 0.5 \cdot (3.50 \times 10^{25}) \cdot (4.65 \times 10^{-26}) \cdot 0.0350 \cdot 320^2 \cdot \hat{i} = 2918.4\text{ N} \cdot \hat{i}

    Correct

    F⃗gas→wall=nVmAv‾x2 i^≈+5.83×103 i^ N\vec{F}_{\text{gas}\to\text{wall}} = n_V m A \overline{v}_x^2 \,\hat{i} \approx +5.83 \times 10^3\,\hat{i}\text{ N}

    Your algebraic substitution and arithmetic are consistent with your earlier formula, but the result is exactly half the correct force due to the missing factor of 2 in momentum transfer.

  4. Step 4

    P=∣F∣A=2918.40.0350=8.34×104 PaP = \frac{|F|}{A} = \frac{2918.4}{0.0350} = 8.34 \times 10^4\text{ Pa}

    Correct

    P=∣F⃗∣A=nVmv‾x2≈1.67×105 PaP = \frac{|\vec{F}|}{A} = n_V m \overline{v}_x^2 \approx 1.67 \times 10^5\text{ Pa}

    You correctly related scalar pressure to force magnitude divided by area, but the value is half the actual pressure due to the propagated momentum error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that only half of the isotropic gas particles move toward the surface in the +i^+\hat{i} direction.

You set up the correct relationship between particle collision rate and macroscopic force.

You properly computed scalar pressure as the magnitude of normal force divided by area.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Momentum Transfer Factor in Elastic Rebound

You wrote Δp=mvx\Delta p = m v_x as if the particles simply stick to the wall or come to rest, omitting the reverse momentum that doubles the impulse upon elastic bounce.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing stopping momentum (pinitial=mvp_{\text{initial}} = mv) with total momentum change in elastic rebound (Δp=pfinal−pinitial=−mv−mv=−2mv\Delta p = p_{\text{final}} - p_{\text{initial}} = -mv - mv = -2mv).

REASONING PATH
Your ACEpath teacher’s suggested approach
Elastic Momentum Change
  • For a particle reflecting elastically with unchanged speed perpendicular to a stationary wall, Δpwall=+2mvx\Delta p_{\text{wall}} = +2mv_x.

  • Always subtract final momentum vector from initial momentum vector: Δp=(−mvx)−(+mvx)=−2mvx\Delta p = (-mv_x) - (+mv_x) = -2mv_x on the particle, delivering +2mvx+2mv_x to the surface.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the momentum delivered to the wall per elastic impact to J=2mv‾xJ = 2 m \overline{v}_x.

  2. Multiply collision rate by impulse per collision: F⃗=(12nVAv‾x)(2mv‾x) i^=nVmAv‾x2 i^\vec{F} = \left(\frac{1}{2} n_V A \overline{v}_x\right)(2 m \overline{v}_x)\,\hat{i} = n_V m A \overline{v}_x^2\,\hat{i}.

  3. Substitute numerical values: F⃗=(3.50×1025)(4.65×10−26)(0.0350)(320)2 i^≈+5.83×103 i^ N\vec{F} = (3.50 \times 10^{25})(4.65 \times 10^{-26})(0.0350)(320)^2\,\hat{i} \approx +5.83 \times 10^3\,\hat{i}\text{ N}.

  4. Divide by area: P=∣F⃗∣A=nVmv‾x2≈1.67×105 PaP = \frac{|\vec{F}|}{A} = n_V m \overline{v}_x^2 \approx 1.67 \times 10^5\text{ Pa}.

Final answer

(a) F⃗gas→wall=+5.83×103 i^ N\vec{F}_{\text{gas}\to\text{wall}} = +5.83 \times 10^3\,\hat{i}\text{ N}, (b) P=1.67×105 PaP = 1.67 \times 10^5\text{ Pa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between completely inelastic collisions (where momentum transfer is mvmv) and perfectly elastic specular collisions (where momentum transfer is 2mv2mv).

  • Practice deriving macroscopic kinetic gas pressure from microscopic particle collisions.

Lock it in

Similar question

01

A container holds helium gas (m=6.64×10−27 kgm = 6.64 \times 10^{-27}\text{ kg}) with total particle density nV=2.00×1025 m−3n_V = 2.00 \times 10^{25}\text{ m}^{-3}. If the average normal speed of particles approaching a wall of area A=0.0200 m2A = 0.0200\text{ m}^2 is v‾x=500 m/s\overline{v}_x = 500\text{ m/s}, calculate the collision rate ΔNΔt\frac{\Delta N}{\Delta t} on this wall.

Answer

ΔNΔt=12nVAv‾x=12(2.00×1025 m−3)(0.0200 m2)(500 m/s)=1.00×1026 collisions/s\frac{\Delta N}{\Delta t} = \frac{1}{2} n_V A \overline{v}_x = \frac{1}{2}(2.00 \times 10^{25}\text{ m}^{-3})(0.0200\text{ m}^2)(500\text{ m/s}) = 1.00 \times 10^{26}\text{ collisions/s}.

02

Using the collision rate from the previous exercise, find the magnitude of the net force exerted on the wall assuming specular elastic reflections.

Answer

Each impact transfers impulse J=2mv‾x=2(6.64×10−27 kg)(500 m/s)=6.64×10−24 N⋅sJ = 2m\overline{v}_x = 2(6.64 \times 10^{-27}\text{ kg})(500\text{ m/s}) = 6.64 \times 10^{-24}\text{ N}\cdot\text{s}. The force is F=ΔNΔtJ=(1.00×1026 s−1)(6.64×10−24 N⋅s)=664 NF = \frac{\Delta N}{\Delta t} J = (1.00 \times 10^{26}\text{ s}^{-1})(6.64 \times 10^{-24}\text{ N}\cdot\text{s}) = 664\text{ N}.

03

A surface in a vacuum chamber is bombarded by gas molecules at total number density nV=4.0×1024 m−3n_V = 4.0 \times 10^{24}\text{ m}^{-3} with mean approaching normal velocity v‾x=400 m/s\overline{v}_x = 400\text{ m/s} and mass m=4.8×10−26 kgm = 4.8 \times 10^{-26}\text{ kg}. If 40%40\% of molecules reflect elastically while 60%60\% stick to the surface (inelastic absorption), find the pressure exerted on the surface.

Answer

Elastic impulse: 2mv‾x2m\overline{v}_x; absorption impulse: mv‾xm\overline{v}_x. Average impulse per strike: J‾=[0.40(2)+0.60(1)]mv‾x=1.40mv‾x\overline{J} = [0.40(2) + 0.60(1)]m\overline{v}_x = 1.40 m\overline{v}_x. Pressure is P=FA=(12nVv‾x)(1.40mv‾x)=0.70nVmv‾x2P = \frac{F}{A} = \left(\frac{1}{2} n_V \overline{v}_x\right)(1.40 m\overline{v}_x) = 0.70 n_V m \overline{v}_x^2. Substituting values: P=0.70(4.0×1024)(4.8×10−26)(400)2=2.15×104 PaP = 0.70(4.0 \times 10^{24})(4.8 \times 10^{-26})(400)^2 = 2.15 \times 10^4\text{ Pa}.

Loading workspace…