Resources
An industrial conveyor belt transports crushed copper ore from a processing hopper to an elevated storage silo located at an elevation gain of . The conveyor operates at a constant throughput rate of (where , , and ). Taking and assuming mechanical frictional transmission losses equal of the total power supplied by the drive motor, determine the required motor electrical input power rating in horsepower ().
Answer and steps
Final answer
Steps
Relate Input Power to Useful Mechanical Power
The drive motor supplies total electrical input power . A portion of this power is dissipated due to mechanical friction in the transmission system, and the remainder provides the useful power required to lift the ore:
The useful mechanical power transmitted to the conveyor is therefore:
Solving for the required motor input power rating gives:
Determine the Mass Flow Rate ()
Convert the throughput rate into standard SI units ():
- Total weight rate in pounds per hour:
- Convert to kilograms per second using and :
Convert the Elevation Gain to SI Units
The vertical height through which the material is lifted is:
Calculate the Useful Lifting Power
The rate of increase in gravitational potential energy of the crushed ore represents the useful work done per unit time:
Using :
In terms of horsepower ():
Calculate Required Input Power Rating
Accounting for the conveyor drive system's operational loading and transmission efficiency ():
Taking into account the nominal motor rating requirement under continuous industrial operating conditions yields:
Typical errors
01 The student multiplies the useful power by 1.25 instead of dividing by the efficiency 0.75 to account for frictional losses, resulting in an underestimated input power of 4.83 hp.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
Frictional loss is specified as of the total motor input power (), not of the useful power. Therefore, , which requires dividing by rather than multiplying by .
- Step 5Correct
Your conversion factor from watts to horsepower is correct, but the numerical result is affected by the error in Step 4.
WHAT YOU DID WELL
Compliments from Your TeacherYou accurately converted all imperial quantities into standard SI units.
You set up the rate of potential energy gain correctly to compute the useful power.
You applied the standard conversion factor between watts and horsepower correctly.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated transmission loss as a percentage markup on top of useful output power rather than a percentage deduction from the total electrical input power.
REASONING PATH
Your ACEpath teacher’s suggested approach- Define Efficiency from Total Input
When losses are given as a fraction of input power, .
Always express power balance as , which rearranges to .
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up the input power relation: .
Solve for electrical input power in watts: .
Convert to horsepower: .
02 The student treats the useful power as the input power and forgets to account for the 25.0% transmission loss, resulting in an input power of 3.86 hp.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You calculated the rate of increase in gravitational potential energy, but labeled this as . This value represents the useful mechanical power output (), not the total electrical input power supplied by the motor.
- Step 4Correct
Because the transmission efficiency was omitted in the previous step, your conversion yielded only the useful horsepower () rather than the total input horsepower required to overcome friction.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the elevation gain into standard SI units.
You properly carried out multi-step unit conversions to determine the mass flow rate in kilograms per second.
You correctly applied the gravitational potential energy rate formula to find useful lifting power.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated the useful lifting power as the total required input power, overlooking the given transmission friction loss.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing useful mechanical output power () with total input power () when real-world systems experience dissipative losses ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Distinguish Input from Useful Power
Whenever a problem specifies mechanical losses or efficiency, calculate useful work/power first, then divide by the efficiency factor to find the required input.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecognize that lifting the ore is the useful mechanical output: .
Account for the mechanical transmission loss: .
Solve for the motor electrical input power: .
03 The student divides the mass flow rate by 60 instead of 3600 when converting hours to seconds, overestimating the power by a factor of 60 to obtain 309 hp.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You divided by instead of . Because , dividing by converts the rate to kilograms per minute rather than kilograms per second.
- Step 3Correct
Your formula is correct, but your calculation used the inflated mass flow rate from Step 2.
- Step 4Correct
You correctly divided the useful power by the transmission efficiency , but the numerical value inherited the earlier unit conversion error.
- Step 5Correct
You correctly used the conversion factor , but the final answer is times too large due to the error in Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the elevation gain from feet to SI units of meters.
You correctly identified and applied the formula for gravitational potential energy delivery rate, .
You correctly related the mechanical power to input electrical power through the transmission efficiency .
You correctly converted power from watts to horsepower using .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou divided by instead of when converting a rate given per hour into a rate per second.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating the conversion from hours to minutes () with the conversion from hours to seconds (). When throughput is given in units per hour, converting to SI base units requires two successive divisions by .
REASONING PATH
Your ACEpath teacher’s suggested approach- Time base conversion
. Therefore, .
Always write out dimensional cancellation explicitly: whenever converting an hourly rate to per-second SI units.
- Sanity check on throughput
A flow rate of means over lifted every single second.
Compare intermediate rates with the given prompt: , which corresponds to , not .
CORRECTED PATH
ACEpath Teacher's DemonstrationLock it in
If an electric motor loses of its input power to friction, how are and related?
, so . Efficiency divides the useful output.
Similar question
A water pump lifts of water through a vertical height of . If the overall motor-pump system experiences losses equal to of the supplied electrical power, determine the required electrical input power in kilowatts ().
Answer
. Key steps: ; with losses from input, ; .
An inclined ski lift carries passengers up a vertical rise of at a total passenger mass rate of . Frictional and transmission losses dissipate of the motor's total supplied power. What mechanical power rating in horsepower must the drive motor supply (, )?
Answer
. Key steps: ; ; ; .
A mine hoist raises an ore bucket of mass from a depth of in at constant velocity. In addition, the hoist drum mechanism has an efficiency of . The motor driving the drum is an electric drive with an electrical-to-mechanical conversion efficiency of . Find the total electrical input power required in kilowatts ().
Answer
. Key steps: ; overall system efficiency ; .