Resources

A heat engine absorbs heat QH=2400 JQ_H = 2400\text{ J} from a thermal reservoir maintained at constant temperature TH=600 KT_H = 600\text{ K} and discharges heat QC=1680 JQ_C = 1680\text{ J} into a low-temperature sink at TC=300 KT_C = 300\text{ K} during each complete thermodynamic cycle. Rather than finding work output, determine: (a) the thermal efficiency η\eta of this engine compared to the theoretical Carnot efficiency ηCarnot\eta_{\text{Carnot}} between the same reservoirs, (b) the net entropy change of the universe per cycle ΔScycle, univ\Delta S_{\text{cycle, univ}}, and (c) the ratio ΔScycle, univΔSengine\frac{\Delta S_{\text{cycle, univ}}}{\Delta S_{\text{engine}}} to demonstrate why net entropy generation characterizes irreversible cyclic operation.

Answer and steps

Final answer

(a) η=0.300\eta = 0.300 (30.0%30.0\%), whereas ηCarnot=0.500\eta_{\text{Carnot}} = 0.500 (50.0%50.0\%); (b) ΔScycle, univ=+1.60 J/K\Delta S_{\text{cycle, univ}} = +1.60\text{ J}/\text{K}; (c) Because ΔSengine=0 J/K\Delta S_{\text{engine}} = 0\text{ J}/\text{K} for any complete cycle of a state function, the ratio is undefined (division by zero), confirming entropy generated lies entirely in the surroundings/universe.

Steps

Part (a): Thermal Efficiency vs. Carnot Efficiency

  1. Calculate the actual thermal efficiency (η\eta):
    The thermal efficiency of any heat engine is the ratio of net work produced to the heat absorbed from the hot reservoir: η=WQH=QH−QCQH=1−QCQH\eta = \frac{W}{Q_H} = \frac{Q_H - Q_C}{Q_H} = 1 - \frac{Q_C}{Q_H} Substituting QH=2400 JQ_H = 2400\text{ J} and QC=1680 JQ_C = 1680\text{ J}: η=1−1680 J2400 J=1−0.700=0.300(30.0%)\eta = 1 - \frac{1680\text{ J}}{2400\text{ J}} = 1 - 0.700 = 0.300\quad (30.0\%)
  2. Calculate the maximum theoretical Carnot efficiency (ηCarnot\eta_{\text{Carnot}}):
    A Carnot engine operating reversibly between reservoirs at absolute temperatures THT_H and TCT_C has an efficiency given by: ηCarnot=1−TCTH\eta_{\text{Carnot}} = 1 - \frac{T_C}{T_H} Substituting TH=600 KT_H = 600\text{ K} and TC=300 KT_C = 300\text{ K}: ηCarnot=1−300 K600 K=1−0.500=0.500(50.0%)\eta_{\text{Carnot}} = 1 - \frac{300\text{ K}}{600\text{ K}} = 1 - 0.500 = 0.500\quad (50.0\%)

    Because η<ηCarnot\eta < \eta_{\text{Carnot}}, this engine is irreversible.


Part (b): Net Entropy Change of the Universe Per Cycle

The universe consists of the heat engine and the two thermal reservoirs (surroundings): ΔScycle, univ=ΔSengine+ΔSH+ΔSC\Delta S_{\text{cycle, univ}} = \Delta S_{\text{engine}} + \Delta S_H + \Delta S_C

  1. Entropy change of the engine (ΔSengine\Delta S_{\text{engine}}):
    Entropy SS is a state variable. At the end of every complete thermodynamic cycle, the working substance returns to its initial thermodynamic state: ΔSengine=0 J/K\Delta S_{\text{engine}} = 0\text{ J/K}
  2. Entropy changes of the reservoirs:
    Because the reservoirs are sufficiently large to remain at constant temperature, their entropy changes are calculated using reversible heat transfer:

    • Hot reservoir: Loses heat QHQ_H: ΔSH=−QHTH=−2400 J600 K=−4.00 J/K\Delta S_H = -\frac{Q_H}{T_H} = -\frac{2400\text{ J}}{600\text{ K}} = -4.00\text{ J/K}
    • Cold sink: Gains heat QCQ_C: ΔSC=+QCTC=+1680 J300 K=+5.60 J/K\Delta S_C = +\frac{Q_C}{T_C} = +\frac{1680\text{ J}}{300\text{ K}} = +5.60\text{ J/K}
  3. Total entropy change: ΔScycle, univ=0+(−4.00 J/K)+5.60 J/K=+1.60 J/K\Delta S_{\text{cycle, univ}} = 0 + (-4.00\text{ J/K}) + 5.60\text{ J/K} = +1.60\text{ J/K}

    The positive value (ΔScycle, univ>0\Delta S_{\text{cycle, univ}} > 0) confirms that the cycle is irreversible, in accordance with the Second Law of Thermodynamics.


Part (c): The Ratio ΔScycle, univΔSengine\frac{\Delta S_{\text{cycle, univ}}}{\Delta S_{\text{engine}}} and Irreversible Cyclic Operation

  • Evaluating the proposed ratio gives: ΔScycle, univΔSengine=+1.60 J/K0 J/K(undefined)\frac{\Delta S_{\text{cycle, univ}}}{\Delta S_{\text{engine}}} = \frac{+1.60\text{ J/K}}{0\text{ J/K}} \quad (\text{undefined})
  • Physical Significance:
    Because division by zero is undefined, this ratio highlights an essential principle: an engine cannot accumulate entropy over a complete cycle. Instead, all entropy generated by internal and external irreversibilities is continuously expelled into the surroundings. Consequently, net entropy generation (ΔSuniv>0\Delta S_{\text{univ}} > 0) manifests entirely in the universe, serving as the definitive signature of irreversible cyclic operation.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the net entropy change of the engine over a complete cycle with the heat absorbed divided by temperature, treating ΔS_engine as Q_H/T_H instead of recognizing it is zero for a cycle.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    η=1−16802400=0.30  ⟹  ηCarnot=1−300600=0.50  ⟹  η<ηCarnot\eta = 1 - \frac{1680}{2400} = 0.30 \implies \eta_{\text{Carnot}} = 1 - \frac{300}{600} = 0.50 \implies \eta < \eta_{\text{Carnot}}

  2. Step 2

    Δ\Delta S_H = -2400600\frac{2400}{600} = -4 J/K\text{ J/K}   ⟹  \implies Δ\Delta S_C = 1680300\frac{1680}{300} = +5.6 J/K\text{ J/K}   ⟹  \implies Δ\Delta S_{cycle, univ\text{cycle, univ}} = -4 + 5.6 = +1.6 J/K\text{ J/K}_

  3. Step 3

    Δ\Delta S_{engine\text{engine}} = QHTH\frac{Q_H}{T_H} = 2400600\frac{2400}{600} = 4 J/K\text{ J/K}_

    Correct

    ΔSengine=0 J/K\Delta S_{\text{engine}} = 0\text{ J/K}

    Because entropy SS is a thermodynamic state variable, the working substance returns to its initial state at the end of every complete cycle, meaning ΔSengine=0 J/K\Delta S_{\text{engine}} = 0\text{ J/K} rather than QHTH\frac{Q_H}{T_H}.

  4. Step 4

    ΔScycle, univΔSengine\frac{\Delta S_{\text{cycle, univ}}}{\Delta S_{\text{engine}}} = 1.64\frac{1.6}{4} = 0.40

    Correct

    ΔScycle, univΔSengine=+1.60 J/K0 J/K  ⟹  undefined\frac{\Delta S_{\text{cycle, univ}}}{\Delta S_{\text{engine}}} = \frac{+1.60\text{ J/K}}{0\text{ J/K}} \implies \text{undefined}

    Because your value for ΔSengine\Delta S_{\text{engine}} was incorrect, this ratio calculation was affected. Dividing by zero gives an undefined ratio, confirming that an engine cannot accumulate entropy over a cycle and that all generated entropy is expelled into the universe.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the thermal efficiency and Carnot efficiency using the heat and temperature values.

You correctly determined the entropy changes of the hot and cold reservoirs with appropriate signs.

You correctly found the net entropy change of the universe to be +1.6 J/K+1.6\text{ J/K}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Cyclic state function confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You evaluated ΔSengine\Delta S_{\text{engine}} as the entropy entering from the hot reservoir (QHTH\frac{Q_H}{T_H}) rather than evaluating the net change of the working substance over a complete thermodynamic cycle. Because entropy is a state variable, any closed cycle satisfies ∮dS=0\oint dS = 0, so ΔSsystem=0\Delta S_{\text{system}} = 0 for any complete cycle.

REASONING PATH
Your ACEpath teacher’s suggested approach
State Variable in a Closed Cycle
  • For any cyclic process returning to its initial state, the net change of any state function (UU, SS, HH, etc.) is identically zero: ∮dS=0\oint dS = 0.

  • Always set ΔScycle=0\Delta S_{\text{cycle}} = 0 for the working fluid or engine over one or more full cycles.

Entropy Generation vs. Accumulation
  • A cyclic heat engine cannot continuously store or accumulate entropy; all entropy generated by internal or external irreversibilities must be rejected to the surroundings.

  • Attribute any positive net entropy change ΔSuniv>0\Delta S_{\text{univ}} > 0 entirely to the surrounding reservoirs.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that entropy SS is a state function: for any closed thermodynamic cycle, ΔSengine=0 J/K\Delta S_{\text{engine}} = 0\text{ J/K}.

  2. Substitute ΔSengine=0 J/K\Delta S_{\text{engine}} = 0\text{ J/K} and ΔScycle, univ=+1.60 J/K\Delta S_{\text{cycle, univ}} = +1.60\text{ J/K} into the required ratio: ΔScycle, univΔSengine=+1.60 J/K0 J/K\frac{\Delta S_{\text{cycle, univ}}}{\Delta S_{\text{engine}}} = \frac{+1.60\text{ J/K}}{0\text{ J/K}}.

  3. Conclude that the ratio is undefined (division by zero), demonstrating that entropy generation occurs entirely in the universe/surroundings.

Final answer

(a) η=0.300\eta = 0.300 (30.0%30.0\%), ηCarnot=0.500\eta_{\text{Carnot}} = 0.500 (50.0%50.0\%); (b) ΔScycle, univ=+1.60 J/K\Delta S_{\text{cycle, univ}} = +1.60\text{ J/K}; (c) Undefined (division by zero, since ΔSengine=0 J/K\Delta S_{\text{engine}} = 0\text{ J/K} for a complete cycle)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the difference between path-dependent quantities (like QQ and WW) and state functions (like UU and SS).

  • Practice identifying when ΔS=0\Delta S = 0 applies to cyclic systems versus when ΔS=QT\Delta S = \frac{Q}{T} applies to isothermal reservoirs.

OverviewACEpath Teacher's Diagnosis

02 The student misassigns the algebraic signs of entropy change for the thermal reservoirs, treating the hot reservoir as gaining entropy and the cold reservoir as losing entropy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    η=1−16802400=0.30  ⟹  ηCarnot=1−300600=0.50  ⟹  The actual efficiency 0.30 is less than Carnot efficiency 0.50.\eta = 1 - \frac{1680}{2400} = 0.30 \implies \eta_{\text{Carnot}} = 1 - \frac{300}{600} = 0.50 \implies \text{The actual efficiency } 0.30 \text{ is less than Carnot efficiency } 0.50.

  2. Step 2

    ΔSH=+2400600=+4 J/K  ⟹  ΔSC=−5.6 J/K\Delta S_H = +\frac{2400}{600} = +4\text{ J/K} \implies \Delta S_C = -5.6\text{ J/K}

    Correct

    ΔSH=−QHTH=−2400 J600 K=−4.00 J/K  ⟹  ΔSC=+QCTC=+1680 J300 K=+5.60 J/K\Delta S_H = -\frac{Q_H}{T_H} = -\frac{2400\text{ J}}{600\text{ K}} = -4.00\text{ J/K} \implies \Delta S_C = +\frac{Q_C}{T_C} = +\frac{1680\text{ J}}{300\text{ K}} = +5.60\text{ J/K}

    You reversed the thermodynamic sign convention for the reservoirs. The hot reservoir releases heat (Q<0Q < 0), so its entropy decreases (−4.00 J/K-4.00\text{ J/K}). The cold sink absorbs heat (Q>0Q > 0), so its entropy increases (+5.60 J/K+5.60\text{ J/K}).

  3. Step 3

    ΔScycle, univ=+4−5.6=−1.6 J/K\Delta S_{\text{cycle, univ}} = +4 - 5.6 = -1.6\text{ J/K}

    Correct

    ΔScycle, univ=ΔSengine+ΔSH+ΔSC=0+(−4.00 J/K)+5.60 J/K=+1.60 J/K\Delta S_{\text{cycle, univ}} = \Delta S_{\text{engine}} + \Delta S_H + \Delta S_C = 0 + (-4.00\text{ J/K}) + 5.60\text{ J/K} = +1.60\text{ J/K}

    Because of the reversed signs in the reservoir entropy changes, your sum resulted in −1.6 J/K-1.6\text{ J/K} instead of +1.60 J/K+1.60\text{ J/K}.

  4. Step 4

    ΔSengine=0 for a complete cycle  ⟹  The ratio −1.6/0 is undefined, violating the second law because ΔSuniv is negative.\Delta S_{\text{engine}} = 0\text{ for a complete cycle} \implies \text{The ratio } -1.6/0\text{ is undefined, violating the second law because } \Delta S_{\text{univ}}\text{ is negative.}

    Correct

    ΔScycle, univΔSengine=+1.60 J/K0 J/K (undefined)\frac{\Delta S_{\text{cycle, univ}}}{\Delta S_{\text{engine}}} = \frac{+1.60\text{ J/K}}{0\text{ J/K}} \text{ (undefined)}, confirming that generated entropy cannot accumulate in the cyclic engine and is entirely transferred to the universe.

    You correctly identified that ΔSengine=0\Delta S_{\text{engine}} = 0 for a complete cycle, making the ratio undefined due to division by zero. However, your conclusion that the process violates the Second Law was caused by the propagated sign error from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the actual thermal efficiency η=0.30\eta = 0.30 and the theoretical Carnot efficiency ηCarnot=0.50\eta_{\text{Carnot}} = 0.50.

You correctly stated that entropy is a state function so ΔSengine=0\Delta S_{\text{engine}} = 0 over a complete thermodynamic cycle.

You recognized that division by zero makes the ratio ΔScycle, univΔSengine\frac{\Delta S_{\text{cycle, univ}}}{\Delta S_{\text{engine}}} undefined.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in thermodynamic entropy transfer

You assigned a positive sign to the entropy change of the hot reservoir and a negative sign to the cold reservoir.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You tracked heat transfer from the perspective of the engine rather than from the perspective of each individual reservoir when computing ΔS=QT\Delta S = \frac{Q}{T}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reservoir Perspective Sign Convention
  • For any thermal reservoir at temperature TT, ΔSres=Qinto resT\Delta S_{\text{res}} = \frac{Q_{\text{into res}}}{T}. Heat leaving a reservoir is negative (Q<0Q < 0); heat entering a reservoir is positive (Q>0Q > 0).

  • Always determine whether heat flows into or out of the reservoir itself before writing ΔS=±∣Q∣T\Delta S = \pm \frac{|Q|}{T}.

Second Law Plausibility Check
  • For any real (irreversible) engine cycle, the Clausius inequality requires ΔSuniv>0\Delta S_{\text{univ}} > 0.

  • If your calculation yields ΔSuniv<0\Delta S_{\text{univ}} < 0 for an engine operating below Carnot efficiency, immediately re-check your sign assignments.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine ΔSH\Delta S_H: Since the hot reservoir expels QH=2400 JQ_H = 2400\text{ J}, its entropy change is ΔSH=−2400 J600 K=−4.00 J/K\Delta S_H = -\frac{2400\text{ J}}{600\text{ K}} = -4.00\text{ J/K}.

  2. Determine ΔSC\Delta S_C: Since the cold reservoir absorbs QC=1680 JQ_C = 1680\text{ J}, its entropy change is ΔSC=+1680 J300 K=+5.60 J/K\Delta S_C = +\frac{1680\text{ J}}{300\text{ K}} = +5.60\text{ J/K}.

  3. Calculate total universe entropy: ΔScycle, univ=ΔSengine+ΔSH+ΔSC=0−4.00 J/K+5.60 J/K=+1.60 J/K\Delta S_{\text{cycle, univ}} = \Delta S_{\text{engine}} + \Delta S_H + \Delta S_C = 0 - 4.00\text{ J/K} + 5.60\text{ J/K} = +1.60\text{ J/K}.

  4. Evaluate the ratio: ΔScycle, univΔSengine=+1.60 J/K0 J/K\frac{\Delta S_{\text{cycle, univ}}}{\Delta S_{\text{engine}}} = \frac{+1.60\text{ J/K}}{0\text{ J/K}}, which is undefined, showing entropy generation resides entirely in the surroundings.

Final answer

(a) η=0.300\eta = 0.300 (30.0%30.0\%), ηCarnot=0.500\eta_{\text{Carnot}} = 0.500 (50.0%50.0\%); (b) ΔScycle, univ=+1.60 J/K\Delta S_{\text{cycle, univ}} = +1.60\text{ J/K}; (c) ΔScycle, univΔSengine=+1.600\frac{\Delta S_{\text{cycle, univ}}}{\Delta S_{\text{engine}}} = \frac{+1.60}{0} (undefined).

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice identifying the system boundary and tracking the direction of QQ for each reservoir individually.

  • Use ΔSuniv≥0\Delta S_{\text{univ}} \ge 0 as a self-check whenever you calculate total entropy change for cyclic heat devices.

OverviewACEpath Teacher's Diagnosis

03 The student incorrectly assumes the Carnot efficiency formula applies to the real irreversible engine, calculating its thermal efficiency directly from reservoir temperatures.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    η=1−TCTH=1−300600=0.50\eta = 1 - \frac{T_C}{T_H} = 1 - \frac{300}{600} = 0.50

    Correct

    η=1−QCQH=1−1680 J2400 J=0.300(30.0%)\eta = 1 - \frac{Q_C}{Q_H} = 1 - \frac{1680\text{ J}}{2400\text{ J}} = 0.300\quad (30.0\%)

    You applied the theoretical Carnot formula 1−TCTH1 - \frac{T_C}{T_H} to find the actual efficiency of the engine. For any real or arbitrary engine, thermal efficiency is defined by the actual energy exchanged: η=WQH=1−QCQH\eta = \frac{W}{Q_H} = 1 - \frac{Q_C}{Q_H}.

  2. Step 2

    ηCarnot=1−300600=0.50  ⟹  η is equal to ηCarnot\eta_{\text{Carnot}} = 1 - \frac{300}{600} = 0.50 \implies \eta\text{ is equal to }\eta_{\text{Carnot}}

    Correct

    ηCarnot=1−TCTH=0.500(50.0%), so η<ηCarnot\eta_{\text{Carnot}} = 1 - \frac{T_C}{T_H} = 0.500\quad (50.0\%), \text{ so } \eta < \eta_{\text{Carnot}}

    You calculated the Carnot efficiency correctly as 0.500.50, but your conclusion that η=ηCarnot\eta = \eta_{\text{Carnot}} was thrown off by the incorrect actual efficiency calculated in Step 1. Because the actual efficiency is 0.300.30, η<ηCarnot\eta < \eta_{\text{Carnot}}, which proves the engine is irreversible.

  3. Step 3

    ΔSuniv=−2400600+1680300  ⟹  ΔSuniv=−4+5.6=+1.6 J/K\Delta S_{\text{univ}} = \frac{-2400}{600} + \frac{1680}{300} \implies \Delta S_{\text{univ}} = -4 + 5.6 = +1.6\text{ J/K}

  4. Step 4

    Since the engine completes a cycle, ΔSengine=0 J/K.  ⟹  The ratio 1.60 is undefined because of division by zero.\text{Since the engine completes a cycle, } \Delta S_{\text{engine}} = 0\text{ J/K.} \implies \text{The ratio } \frac{1.6}{0} \text{ is undefined because of division by zero.}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that entropy is a state function and equals zero for a cyclic working fluid.

You calculated the net entropy change of the universe accurately from the thermal reservoir transfers.

You correctly evaluated the theoretical Carnot efficiency using absolute reservoir temperatures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Carnot efficiency formula misapplied to real engine

No slip occurred; you made a conceptual choice to use temperature ratios instead of heat ratios for the actual efficiency.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the universal definition of actual thermal efficiency (η=1−QC/QH\eta = 1 - Q_C/Q_H, applicable to all engines) with the Carnot efficiency limit (ηCarnot=1−TC/TH\eta_{\text{Carnot}} = 1 - T_C/T_H, applicable only to ideal reversible engines).

REASONING PATH
Your ACEpath teacher’s suggested approach
Actual Efficiency vs. Maximum Possible Efficiency
  • For any heat engine, η=1−QCQH\eta = 1 - \frac{Q_C}{Q_H}. The formula η=1−TCTH\eta = 1 - \frac{T_C}{T_H} is strictly reserved for an ideal reversible (Carnot) engine.

  • Always compute actual efficiency from the given heats QHQ_H and QCQ_C, and use reservoir temperatures THT_H and TCT_C only when computing the Carnot benchmark.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the actual heat quantities absorbed and rejected to determine actual thermal efficiency: η=1−QCQH=1−1680 J2400 J=1−0.700=0.300\eta = 1 - \frac{Q_C}{Q_H} = 1 - \frac{1680\text{ J}}{2400\text{ J}} = 1 - 0.700 = 0.300.

  2. Compare this actual efficiency to the theoretical Carnot efficiency: η=0.300<ηCarnot=0.500\eta = 0.300 < \eta_{\text{Carnot}} = 0.500.

Final answer

(a) η=0.300\eta = 0.300 (30.0%30.0\%) compared to ηCarnot=0.500\eta_{\text{Carnot}} = 0.500 (50.0%50.0\%); (b) ΔScycle, univ=+1.60 J/K\Delta S_{\text{cycle, univ}} = +1.60\text{ J/K}; (c) Because ΔSengine=0 J/K\Delta S_{\text{engine}} = 0\text{ J/K} over a complete cycle, the ratio is undefined, demonstrating that generated entropy is entirely expelled to the universe.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between the First Law definition of efficiency (1−QC/QH1 - Q_C/Q_H) and the Second Law reversible upper limit (1−TC/TH1 - T_C/T_H).

  • Practice checking whether η<ηCarnot\eta < \eta_{\text{Carnot}} whenever an engine generates positive entropy in the universe.

Lock it in

Similar question

01

A heat engine absorbs 3000 J3000\text{ J} from a reservoir at 500 K500\text{ K} and discharges 2100 J2100\text{ J} to a reservoir at 300 K300\text{ K} in one cycle. Calculate (a) the entropy change of the engine over one complete cycle and (b) the net entropy change of the universe per cycle.

Answer

(a) ΔSengine=0 J/K\Delta S_{\text{engine}} = 0\text{ J/K} because entropy is a state variable and the cycle is complete. (b) ΔSuniv=−3000 J500 K+2100 J300 K=−6.0 J/K+7.0 J/K=+1.0 J/K\Delta S_{\text{univ}} = -\frac{3000\text{ J}}{500\text{ K}} + \frac{2100\text{ J}}{300\text{ K}} = -6.0\text{ J/K} + 7.0\text{ J/K} = +1.0\text{ J/K}.

02

An inventor claims an engine absorbs 1200 J1200\text{ J} of heat from a source at 400 K400\text{ K}, produces 400 J400\text{ J} of net work, and rejects 800 J800\text{ J} to a sink at 200 K200\text{ K} per cycle. Determine whether this cycle is reversible, irreversible, or impossible by evaluating ΔSuniv\Delta S_{\text{univ}}.

Answer

ΔSengine=0 J/K\Delta S_{\text{engine}} = 0\text{ J/K}. For the reservoirs: ΔSuniv=−1200 J400 K+800 J200 K=−3 J/K+4 J/K=+1 J/K\Delta S_{\text{univ}} = -\frac{1200\text{ J}}{400\text{ K}} + \frac{800\text{ J}}{200\text{ K}} = -3\text{ J/K} + 4\text{ J/K} = +1\text{ J/K}. Since ΔSuniv>0\Delta S_{\text{univ}} > 0, the cycle is irreversible (and physically possible).

03

A cyclic heat pump operates between an outdoor environment at TC=260 KT_C = 260\text{ K} and an indoor room at TH=290 KT_H = 290\text{ K}. Over one full cycle, it absorbs QC=1300 JQ_C = 1300\text{ J} from outdoors and delivers QH=1740 JQ_H = 1740\text{ J} to the room. Find the entropy change of the heat pump's refrigerant ΔSrefrigerant\Delta S_{\text{refrigerant}} over one cycle, and the total entropy generated in the universe ΔSgen\Delta S_{\text{gen}}.

Answer

ΔSrefrigerant=0 J/K\Delta S_{\text{refrigerant}} = 0\text{ J/K} because the refrigerant undergoes a complete cycle. The entropy generation in the universe is ΔSgen=ΔSuniv=−QCTC+QHTH=−1300 J260 K+1740 J290 K=−5.0 J/K+6.0 J/K=+1.0 J/K\Delta S_{\text{gen}} = \Delta S_{\text{univ}} = -\frac{Q_C}{T_C} + \frac{Q_H}{T_H} = -\frac{1300\text{ J}}{260\text{ K}} + \frac{1740\text{ J}}{290\text{ K}} = -5.0\text{ J/K} + 6.0\text{ J/K} = +1.0\text{ J/K}.

Loading workspace…