Resources

A meteorological sensor package with a mass of m=1.80 kgm = 1.80\text{ kg} is dropped from rest from an aerial drone hovering above the ground. High-speed telemetry records that at an altitude of y=35.0 my = 35.0\text{ m} above the ground, the package possesses a kinetic energy of K=494 JK = 494\text{ J}. Assuming aerodynamic drag is negligible throughout the descent and defining the ground as y=0 my = 0\text{ m}, determine: (a) the total mechanical energy EE of the sensor package, and (b) the initial release height h0h_0 from which the drone dropped the package. Use g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer and steps

Final answer

(a) E=1.11×103 JE = 1.11 \times 10^3\text{ J}; (b) h0=63.0 mh_0 = 63.0\text{ m}.

Steps

Part (a): Determine the Total Mechanical Energy EE

  1. Calculate the Gravitational Potential Energy at y=35.0 my = 35.0\text{ m}
    The gravitational potential energy UU of an object of mass mm at a height yy above the reference level (y=0 my = 0\text{ m}) is given by: U=mgyU = m g y Substituting the given values: U=(1.80 kg)(9.80 m/s2)(35.0 m)=617.4 JU = (1.80\text{ kg})(9.80\text{ m/s}^2)(35.0\text{ m}) = 617.4\text{ J}
  2. Find the Total Mechanical Energy EE
    The total mechanical energy of the system is the sum of its kinetic energy KK and gravitational potential energy UU at that altitude: E=K+UE = K + U E=494 J+617.4 J=1111.4 JE = 494\text{ J} + 617.4\text{ J} = 1111.4\text{ J} Rounding to three significant figures gives: E=1.11×103 JE = 1.11 \times 10^3\text{ J}

Part (b): Determine the Initial Release Height h0h_0

  1. Apply the Law of Conservation of Mechanical Energy
    Because air resistance is negligible, the only force doing work on the sensor package is gravity (a conservative force). Therefore, the total mechanical energy is conserved throughout the fall: Einitial=Eintermediate=EE_{\text{initial}} = E_{\text{intermediate}} = E
  2. Relate Total Energy to the Initial State
    The package is dropped from rest at height h0h_0, which means its initial velocity is zero, and thus its initial kinetic energy is zero (K0=0 JK_0 = 0\text{ J}). All of its initial mechanical energy is stored as gravitational potential energy: E=U0=mgh0E = U_0 = m g h_0
  3. Solve for the Release Height h0h_0
    Rearranging the equation to solve for h0h_0: h0=Emgh_0 = \frac{E}{m g} Substitute the unrounded value of EE to avoid intermediate rounding errors: h0=1111.4 J(1.80 kg)(9.80 m/s2)=1111.4 J17.64 N=63.0 mh_0 = \frac{1111.4\text{ J}}{(1.80\text{ kg})(9.80\text{ m/s}^2)} = \frac{1111.4\text{ J}}{17.64\text{ N}} = 63.0\text{ m}

Key Pitfall to Avoid

  • Assuming EE changes during descent: Do not calculate the initial state using kinematics formulas with drag or assume kinetic energy is constant. Under zero drag, the total mechanical energy E=K+UE = K + U remains constant at every point along the trajectory.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses total mechanical energy with kinetic energy alone, omitting potential energy when determining total energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    E=K=494 JE = K = 494\text{ J}

    Correct

    E=K+U=494 J+(1.80 kg)(9.80 m/s2)(35.0 m)=1111.4 J≈1.11×103 JE = K + U = 494\text{ J} + (1.80\text{ kg})(9.80\text{ m/s}^2)(35.0\text{ m}) = 1111.4\text{ J} \approx 1.11 \times 10^3\text{ J}

    You set the total mechanical energy equal to kinetic energy only. Because the package is still 35.0 m35.0\text{ m} above the ground, it also possesses gravitational potential energy U=mgyU = mgy that must be added to KK.

  2. Step 2

    E=m⋅g⋅h0  ⟹  h0=494(1.80⋅9.80)  ⟹  h0=28.0 mE = m \cdot g \cdot h_0 \implies h_0 = \frac{494}{(1.80 \cdot 9.80)} \implies h_0 = 28.0\text{ m}

    Correct

    h0=Emg=1111.4 J(1.80 kg)(9.80 m/s2)=63.0 mh_0 = \frac{E}{m g} = \frac{1111.4\text{ J}}{(1.80\text{ kg})(9.80\text{ m/s}^2)} = 63.0\text{ m}

    You set up the correct relationship for release from rest (E=mgh0E = m g h_0), but substituting your previous energy value propagated the error. Notice that a release height of 28.0 m28.0\text{ m} is lower than the mid-air altitude of 35.0 m35.0\text{ m}, signaling that total energy was underestimated.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that an object dropped from rest has only gravitational potential energy at its release point: E=mgh0E = m g h_0.

You rearranged the formula correctly to solve for the release height as h0=Emgh_0 = \frac{E}{mg}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Gravitational Potential Energy

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated total mechanical energy with kinetic energy alone, overlooking the fact that at any non-zero height above the reference level, mechanical energy is the sum of both kinetic and potential energy.

REASONING PATH
Your ACEpath teacher’s suggested approach
Account for Both Energy Forms
  • Total mechanical energy is defined as E=K+U=12mv2+mgyE = K + U = \frac{1}{2}mv^2 + mgy.

  • Always evaluate both motion (KK) and vertical position (UU) at a given point before declaring the total energy.

Sanity Check Intermediate Altitudes
  • For an object dropped from rest moving downward, the release height h0h_0 must always be strictly greater than any later height yy.

  • Compare your calculated drop height to the given altitude; if h0<yh_0 < y, recheck your energy sum.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute potential energy at y=35.0 my = 35.0\text{ m}: U=mgy=(1.80 kg)(9.80 m/s2)(35.0 m)=617.4 JU = m g y = (1.80\text{ kg})(9.80\text{ m/s}^2)(35.0\text{ m}) = 617.4\text{ J}.

  2. Sum both forms to find total mechanical energy: E=K+U=494 J+617.4 J=1111.4 J≈1.11×103 JE = K + U = 494\text{ J} + 617.4\text{ J} = 1111.4\text{ J} \approx 1.11 \times 10^3\text{ J}.

  3. Use conservation of energy to find release height: h0=Emg=1111.4 J(1.80 kg)(9.80 m/s2)=63.0 mh_0 = \frac{E}{mg} = \frac{1111.4\text{ J}}{(1.80\text{ kg})(9.80\text{ m/s}^2)} = 63.0\text{ m}.

Final answer

(a) E=1.11×103 JE = 1.11 \times 10^3\text{ J}; (b) h0=63.0 mh_0 = 63.0\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the full definition E=K+UE = K + U explicitly before plugging in numeric values.

  • Perform a physical reality check on height values to ensure the starting position is higher than intermediate falling points.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the height fallen from kinetic energy alone using h = K / (m·g) = 28.0 m but reports this distance as the release height instead of adding it to the current altitude.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    U=(1.80)(9.80)(35.0)=617.4 J  ⟹  E=494+617.4=1111.4 JU = (1.80)(9.80)(35.0) = 617.4\text{ J} \implies E = 494 + 617.4 = 1111.4\text{ J}

  2. Step 2

    Δy=Km⋅g=4941.80⋅9.80=28.0 m\Delta y = \frac{K}{m \cdot g} = \frac{494}{1.80 \cdot 9.80} = 28.0\text{ m}

  3. Step 3

    h0=28.0 mh_0 = 28.0\text{ m}

    Correct

    h0=y+Δy=35.0 m+28.0 m=63.0 mh_0 = y + \Delta y = 35.0\text{ m} + 28.0\text{ m} = 63.0\text{ m} (or h0=Emg=1111.4 J17.64 N=63.0 mh_0 = \frac{E}{mg} = \frac{1111.4\text{ J}}{17.64\text{ N}} = 63.0\text{ m})

    You equated the initial release height h0h_0 to the distance fallen Δy\Delta y. Because the package is still 35.0 m35.0\text{ m} above the ground, the initial height must be the sum of its current altitude and the distance it dropped: h0=35.0 m+28.0 m=63.0 mh_0 = 35.0\text{ m} + 28.0\text{ m} = 63.0\text{ m}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the gravitational potential energy at an altitude of 35.0 m35.0\text{ m}.

You correctly found the total mechanical energy by adding kinetic and potential energy.

You used the work-energy relationship properly to calculate the vertical distance fallen.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflating distance fallen with release height

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You interpreted the vertical displacement Δy\Delta y as the absolute position h0h_0 relative to the ground reference (y=0 my = 0\text{ m}), omitting the altitude already remaining below the object.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reference Frame vs. Displacement
  • Absolute height above ground is related to displacement by h0=y+Δyh_0 = y + \Delta y, where yy is the current altitude and Δy\Delta y is the distance fallen.

  • Always verify whether a solved length represents a position coordinate relative to y=0y = 0 or a displacement between two points.

Direct Total Energy Method
  • At release from rest, all mechanical energy is potential energy: E=mgh0E = mgh_0.

  • Calculate the initial height directly from total conserved energy using h0=Emgh_0 = \frac{E}{mg} to avoid coordinate-shift errors.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that Δy=28.0 m\Delta y = 28.0\text{ m} is the distance fallen from the drone to the altitude of 35.0 m35.0\text{ m}.

  2. Add the current altitude above the ground: h0=y+Δy=35.0 m+28.0 m=63.0 mh_0 = y + \Delta y = 35.0\text{ m} + 28.0\text{ m} = 63.0\text{ m}.

Final answer

(a) E=1.11×103 JE = 1.11 \times 10^3\text{ J}; (b) h0=63.0 mh_0 = 63.0\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check coordinate definitions when working with potential energy to make sure distance fallen and height above the ground reference are not confused.

  • Practice solving release heights directly from total conserved mechanical energy using h0=Emgh_0 = \frac{E}{mg}.

OverviewACEpath Teacher's Diagnosis

03 The student subtracts potential energy from kinetic energy instead of adding them when calculating total mechanical energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    U=(1.80)(9.80)(35.0)=617.4 JU = (1.80)(9.80)(35.0) = 617.4\text{ J}

  2. Step 2

    E=U−K=617.4−494=123.4 JE = U - K = 617.4 - 494 = 123.4\text{ J}

    Correct

    E=K+U=494 J+617.4 J=1111.4 J≈1.11×103 JE = K + U = 494\text{ J} + 617.4\text{ J} = 1111.4\text{ J} \approx 1.11 \times 10^3\text{ J}

    Total mechanical energy is the sum of kinetic energy and potential energy (E=K+UE = K + U), not their difference.

  3. Step 3

    E=m⋅g⋅h0  ⟹  h0=123.41.80⋅9.80=7.00 mE = m \cdot g \cdot h_0 \implies h_0 = \frac{123.4}{1.80 \cdot 9.80} = 7.00\text{ m}

    Correct

    h0=Emg=1111.4 J(1.80 kg)(9.80 m/s2)=63.0 mh_0 = \frac{E}{mg} = \frac{1111.4\text{ J}}{(1.80\text{ kg})(9.80\text{ m/s}^2)} = 63.0\text{ m}

    Your algebraic setup equating initial potential energy to total mechanical energy was completely correct, but substituting the incorrect value of EE led to an erroneous release height.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the gravitational potential energy using U=mgyU = mgy.

You recognized that total mechanical energy is conserved and equals the initial potential energy mgh0mgh_0 when released from rest.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula confusion (sum vs. difference)

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the definition of total mechanical energy (E=K+UE = K + U) with energy difference equations such as the work-energy theorem (ΔK=W\Delta K = W) or conservation in the form ΔK+ΔU=0  ⟹  ΔK=−ΔU\Delta K + \Delta U = 0 \implies \Delta K = -\Delta U.

REASONING PATH
Your ACEpath teacher’s suggested approach
Definition of Total Mechanical Energy
  • Total mechanical energy EE is always the sum of all kinetic and potential energies: E=K+UE = K + U.

  • Add KK and UU together whenever evaluating total mechanical energy at any single instant.

Physical Reality Check
  • An object falling downwards must have been dropped from a height greater than any intermediate altitude during its descent.

  • Check whether your calculated release height h0h_0 exceeds the intermediate height y=35.0 my = 35.0\text{ m}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate total mechanical energy as the sum of kinetic and potential energy: E=K+U=494 J+617.4 J=1111.4 JE = K + U = 494\text{ J} + 617.4\text{ J} = 1111.4\text{ J}.

  2. Equate total mechanical energy at release to potential energy: E=mgh0E = mgh_0.

  3. Solve for h0h_0: h0=1111.4 J(1.80 kg)(9.80 m/s2)=63.0 mh_0 = \frac{1111.4\text{ J}}{(1.80\text{ kg})(9.80\text{ m/s}^2)} = 63.0\text{ m}.

Final answer

(a) E=1.11×103 JE = 1.11 \times 10^3\text{ J}; (b) h0=63.0 mh_0 = 63.0\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the definition of total mechanical energy as a combined sum of energies.

  • Perform a quick sanity check on height values whenever working with free-fall problems.

Lock it in

Similar question

01

A 2.50 kg2.50\text{ kg} rock falls from rest without drag. At a height of 12.0 m12.0\text{ m} above the ground, it has a speed of 14.0 m/s14.0\text{ m/s}. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate: (a) its total mechanical energy EE, and (b) its release height h0h_0.

Answer

(a) E=539 JE = 539\text{ J}; (b) h0=22.0 mh_0 = 22.0\text{ m}.

Key steps:

  1. K=12mv2=12(2.50)(14.0)2=245 JK = \frac{1}{2}mv^2 = \frac{1}{2}(2.50)(14.0)^2 = 245\text{ J}.
  2. U=mgy=(2.50)(9.80)(12.0)=294 JU = mgy = (2.50)(9.80)(12.0) = 294\text{ J}.
  3. E=K+U=245+294=539 JE = K + U = 245 + 294 = 539\text{ J}.
  4. From rest, E=mgh0  ⟹  h0=539(2.50)(9.80)=22.0 mE = mgh_0 \implies h_0 = \frac{539}{(2.50)(9.80)} = 22.0\text{ m}.
02

A 0.500 kg0.500\text{ kg} projectile is launched from the ground. At an altitude of 40.0 m40.0\text{ m}, telemetry indicates its kinetic energy is 154 J154\text{ J}. Assuming negligible air resistance and g=9.80 m/s2g = 9.80\text{ m/s}^2, find: (a) the total mechanical energy EE, and (b) the maximum altitude hmaxh_{\text{max}} reached by the projectile if it was fired vertically upward.

Answer

(a) E=350 JE = 350\text{ J}; (b) hmax=71.4 mh_{\text{max}} = 71.4\text{ m}.

Key steps:

  1. U=mgy=(0.500)(9.80)(40.0)=196 JU = mgy = (0.500)(9.80)(40.0) = 196\text{ J}.
  2. E=K+U=154+196=350 JE = K + U = 154 + 196 = 350\text{ J}.
  3. At the peak of vertical flight, K=0K = 0, so E=mghmax  ⟹  hmax=350(0.500)(9.80)≈71.4 mE = mgh_{\text{max}} \implies h_{\text{max}} = \frac{350}{(0.500)(9.80)} \approx 71.4\text{ m}.
03

A roller-coaster cart of mass m=400 kgm = 400\text{ kg} starts from rest atop a hill of unknown height h0h_0. As it passes over a secondary crest at height y=18.0 my = 18.0\text{ m}, it travels at 16.0 m/s16.0\text{ m/s}. Assuming frictionless tracks and g=9.80 m/s2g = 9.80\text{ m/s}^2, determine: (a) the total mechanical energy EE of the cart, and (b) the starting height h0h_0.

Answer

(a) E=1.22×105 JE = 1.22 \times 10^5\text{ J} (121.76 kJ121.76\text{ kJ}); (b) h0=31.1 mh_0 = 31.1\text{ m}.

Key steps:

  1. K=12(400)(16.0)2=51,200 JK = \frac{1}{2}(400)(16.0)^2 = 51,200\text{ J}.
  2. U=(400)(9.80)(18.0)=70,560 JU = (400)(9.80)(18.0) = 70,560\text{ J}.
  3. E=K+U=51,200+70,560=121,760 J≈1.22×105 JE = K + U = 51,200 + 70,560 = 121,760\text{ J} \approx 1.22 \times 10^5\text{ J}.
  4. h0=Emg=121,760(400)(9.80)≈31.1 mh_0 = \frac{E}{mg} = \frac{121,760}{(400)(9.80)} \approx 31.1\text{ m}.
Loading workspace…