Resources

A 2.50 mol2.50\text{ mol} sample of an ideal monatomic gas (CV=32RC_V = \frac{3}{2}R, CP=52RC_P = \frac{5}{2}R, where R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K})) is initially at a temperature of T1=300 KT_1 = 300\text{ K}. The gas expands isobarically at a constant pressure of 1.50×105 Pa1.50 \times 10^5\text{ Pa} when 5.20×103 J5.20 \times 10^3\text{ J} of heat is transferred into the system. Determine: (a) the final temperature of the gas T2T_2, (b) the work done by the gas WW, and (c) the fraction of the total absorbed heat that is converted into work (WQ\frac{W}{Q}).

Answer and steps

Final answer

(a) T2=400 KT_2 = 400\text{ K}; (b) W=2.08×103 JW = 2.08 \times 10^3\text{ J}; (c) WQ=0.400\frac{W}{Q} = 0.400 (or 40.0%40.0\%).

Steps

Part (a): Determine the Final Temperature T2T_2

For an ideal gas undergoing a constant-pressure (isobaric) process, the heat transferred to the gas is related to the temperature change by: Q=nCPΔTQ = n C_P \Delta T

where:

  • n=2.50 moln = 2.50\text{ mol} is the amount of substance,
  • CP=52RC_P = \frac{5}{2}R is the molar heat capacity at constant pressure for a monatomic ideal gas,
  • R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}),
  • Q=5.20×103 JQ = 5.20 \times 10^3\text{ J} is the heat added.

First, calculate the molar heat capacity CPC_P: CP=52(8.314 J/(mol⋅K))=20.785 J/(mol⋅K)C_P = \frac{5}{2}(8.314\text{ J}/(\text{mol}\cdot\text{K})) = 20.785\text{ J}/(\text{mol}\cdot\text{K})

Next, solve for the change in temperature ΔT\Delta T: ΔT=QnCP=5.20×103 J(2.50 mol)(20.785 J/(mol⋅K))=5200 J51.9625 J/K≈100 K\Delta T = \frac{Q}{n C_P} = \frac{5.20 \times 10^3\text{ J}}{(2.50\text{ mol})(20.785\text{ J}/(\text{mol}\cdot\text{K}))} = \frac{5200\text{ J}}{51.9625\text{ J}/\text{K}} \approx 100\text{ K}

Since ΔT=T2−T1\Delta T = T_2 - T_1: T2=T1+ΔT=300 K+100 K=400 KT_2 = T_1 + \Delta T = 300\text{ K} + 100\text{ K} = 400\text{ K}


Part (b): Determine the Work Done by the Gas WW

For an isobaric expansion, the work done by the gas is given by W=PΔVW = P \Delta V. Using the ideal gas law (PΔV=nRΔTP \Delta V = n R \Delta T): W=nRΔTW = n R \Delta T

Substitute the known values: W=(2.50 mol)(8.314 J/(mol⋅K))(100 K)=2078.5 J≈2.08×103 JW = (2.50\text{ mol})(8.314\text{ J}/(\text{mol}\cdot\text{K}))(100\text{ K}) = 2078.5\text{ J} \approx 2.08 \times 10^3\text{ J}

(Alternative check via the First Law of Thermodynamics):
The change in internal energy is: ΔU=nCVΔT=(2.50 mol)(32⋅8.314 J/(mol⋅K))(100 K)≈3.12×103 J\Delta U = n C_V \Delta T = (2.50\text{ mol})\left(\frac{3}{2} \cdot 8.314\text{ J}/(\text{mol}\cdot\text{K})\right)(100\text{ K}) \approx 3.12 \times 10^3\text{ J} According to the first law, ΔU=Q−W\Delta U = Q - W, so: W=Q−ΔU=5.20×103 J−3.12×103 J=2.08×103 JW = Q - \Delta U = 5.20 \times 10^3\text{ J} - 3.12 \times 10^3\text{ J} = 2.08 \times 10^3\text{ J}


Part (c): Determine the Fraction of Heat Converted into Work (WQ\frac{W}{Q})

The ratio of the work done to the total heat absorbed is: WQ=nRΔTnCPΔT=RCP\frac{W}{Q} = \frac{n R \Delta T}{n C_P \Delta T} = \frac{R}{C_P}

Substitute CP=52RC_P = \frac{5}{2}R: WQ=R52R=25=0.400(or 40.0%)\frac{W}{Q} = \frac{R}{\frac{5}{2}R} = \frac{2}{5} = 0.400\quad (\text{or } 40.0\%)

Common Pitfall: For an isobaric process, heat energy divides into two channels: part increases the internal energy of the gas (ΔU=35Q=60%\Delta U = \frac{3}{5}Q = 60\%), and part performs mechanical work against the surroundings (W=25Q=40%W = \frac{2}{5}Q = 40\%). Do not assume all heat directly becomes work, as the temperature (and thus internal energy) also increases.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses the constant-volume heat capacity C_V instead of C_P to find the temperature change during an isobaric expansion, leading to an overestimated final temperature and work.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Q=nCVΔT  ⟹  ΔT=52002.50×(32×8.314)≈166.8 K  ⟹  T2=300+166.8=466.8 KQ = n C_V \Delta T \implies \Delta T = \frac{5200}{2.50 \times (\frac{3}{2} \times 8.314)} \approx 166.8\text{ K} \implies T_2 = 300 + 166.8 = 466.8\text{ K}

    Correct

    Q=nCPΔT  ⟹  ΔT=5.20×103 J(2.50 mol)(52×8.314 J/(mol⋅K))=100 K  ⟹  T2=300 K+100 K=400 KQ = n C_P \Delta T \implies \Delta T = \frac{5.20 \times 10^3\text{ J}}{(2.50\text{ mol})\left(\frac{5}{2} \times 8.314\text{ J}/(\text{mol}\cdot\text{K})\right)} = 100\text{ K} \implies T_2 = 300\text{ K} + 100\text{ K} = 400\text{ K}

    Because the gas expands isobarically (at constant pressure), the heat absorbed relates to temperature change via Q=nCPΔTQ = n C_P \Delta T, where CP=52RC_P = \frac{5}{2}R. Using CV=32RC_V = \frac{3}{2}R assumes volume is fixed, which overestimates ΔT\Delta T and the final temperature T2T_2.

  2. Step 2

    W=nRΔT=2.50×8.314×166.8=3467 JW = n R \Delta T = 2.50 \times 8.314 \times 166.8 = 3467\text{ J}

    Correct

    W=nRΔT=(2.50 mol)(8.314 J/(mol⋅K))(100 K)≈2.08×103 JW = n R \Delta T = (2.50\text{ mol})(8.314\text{ J}/(\text{mol}\cdot\text{K}))(100\text{ K}) \approx 2.08 \times 10^3\text{ J}

    Your formula W=PΔV=nRΔTW = P\Delta V = n R \Delta T is completely correct for an isobaric process, but your numerical answer is affected by the incorrect value of ΔT\Delta T from Step 1.

  3. Step 3

    WQ=34675200≈0.67\frac{W}{Q} = \frac{3467}{5200} \approx 0.67

    Correct

    WQ=2.08×103 J5.20×103 J=0.400 (or 40.0%)\frac{W}{Q} = \frac{2.08 \times 10^3\text{ J}}{5.20 \times 10^3\text{ J}} = 0.400\text{ (or } 40.0\%)

    Your method of dividing work by total heat is correct, but the result is affected by the propagated error in WW.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the work done during an isobaric expansion can be expressed as W=nRΔTW = n R \Delta T.

You correctly related the final temperature to the initial temperature using T2=T1+ΔTT_2 = T_1 + \Delta T.

You correctly set up the efficiency ratio as WQ\frac{W}{Q}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wrong Heat Capacity Selection

You substituted CVC_V instead of CPC_P in the formula for heat absorbed during an isobaric process.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the heat capacity for a constant-volume process (CVC_V, which also describes internal energy change ΔU=nCVΔT\Delta U = n C_V \Delta T for any ideal gas process) with the heat capacity governing heat input at constant pressure (CP=CV+RC_P = C_V + R). In an isobaric expansion, heat goes both into raising the internal energy and into doing expansion work against the surroundings, requiring CPC_P.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Heat Capacity to Process Constraint
  • For an ideal gas, heat absorbed at constant volume is QV=nCVΔTQ_V = n C_V \Delta T, whereas heat absorbed at constant pressure is QP=nCPΔTQ_P = n C_P \Delta T.

  • Check the problem statement for keywords like 'isobaric' or 'constant pressure' and immediately select CP=CV+RC_P = C_V + R for QQ calculations.

Internal Energy vs. Heat Added
  • The change in internal energy is always ΔU=nCVΔT\Delta U = n C_V \Delta T for an ideal gas regardless of the process, but Q=ΔU+WQ = \Delta U + W.

  • Reserve nCVΔTn C_V \Delta T for ΔU\Delta U. Only equate QQ to nCVΔTn C_V \Delta T when no boundary work is done (W=0W = 0, isochoric).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate ΔT=QnCP=5.20×103 J(2.50 mol)(20.785 J/(mol⋅K))=100 K\Delta T = \frac{Q}{n C_P} = \frac{5.20 \times 10^3\text{ J}}{(2.50\text{ mol})(20.785\text{ J}/(\text{mol}\cdot\text{K}))} = 100\text{ K}.

  2. Find T2=T1+ΔT=300 K+100 K=400 KT_2 = T_1 + \Delta T = 300\text{ K} + 100\text{ K} = 400\text{ K}.

  3. Calculate W=nRΔT=(2.50 mol)(8.314 J/(mol⋅K))(100 K)=2.08×103 JW = n R \Delta T = (2.50\text{ mol})(8.314\text{ J}/(\text{mol}\cdot\text{K}))(100\text{ K}) = 2.08 \times 10^3\text{ J}.

  4. Compute WQ=2.08×103 J5.20×103 J=RCP=R52R=0.400\frac{W}{Q} = \frac{2.08 \times 10^3\text{ J}}{5.20 \times 10^3\text{ J}} = \frac{R}{C_P} = \frac{R}{\frac{5}{2}R} = 0.400.

Final answer

(a) T2=400 KT_2 = 400\text{ K}; (b) W=2.08×103 JW = 2.08 \times 10^3\text{ J}; (c) WQ=0.400\frac{W}{Q} = 0.400 (or 40.0%40.0\%)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the relation between CPC_P and CVC_V (CP=CV+RC_P = C_V + R) and why CP>CVC_P > C_V physically.

  • Practice identifying whether heat input QQ is at constant volume (Q=nCVΔTQ = n C_V \Delta T) or constant pressure (Q=nCPΔTQ = n C_P \Delta T).

  • Verify that for any isobaric process in a monatomic ideal gas, W=25Q=0.40QW = \frac{2}{5}Q = 0.40 Q and ΔU=35Q=0.60Q\Delta U = \frac{3}{5}Q = 0.60 Q.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the first law of thermodynamics by treating work as equal to heat absorbed without accounting for the internal energy change.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Q=nCPΔT  ⟹  ΔT=52002.50×20.785≈100.1 K  ⟹  T2=300+100.1=400.1 KQ = n C_P \Delta T \implies \Delta T = \frac{5200}{2.50 \times 20.785} \approx 100.1\text{ K} \implies T_2 = 300 + 100.1 = 400.1\text{ K}

  2. Step 2

    W=Q=5200 JW = Q = 5200\text{ J}

    Correct

    W=nRΔT=(2.50 mol)(8.314 J/(mol⋅K))(100 K)≈2.08×103 JW = n R \Delta T = (2.50\text{ mol})(8.314\text{ J}/(\text{mol}\cdot\text{K}))(100\text{ K}) \approx 2.08 \times 10^3\text{ J}

    You assumed all heat added is converted into work (W=QW = Q), which only holds for an isothermal process where ΔT=0\Delta T = 0. In this isobaric process, temperature increases, so part of QQ goes into raising the internal energy (ΔU=nCVΔT\Delta U = n C_V \Delta T).

  3. Step 3

    WQ=52005200=1\frac{W}{Q} = \frac{5200}{5200} = 1

    Correct

    WQ=RCP=R52R=25=0.400\frac{W}{Q} = \frac{R}{C_P} = \frac{R}{\frac{5}{2}R} = \frac{2}{5} = 0.400

    This ratio followed directly from your assumption that W=QW = Q. Using the correct value of work gives WQ=2078.5 J5200 J=0.400\frac{W}{Q} = \frac{2078.5\text{ J}}{5200\text{ J}} = 0.400.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly selected and computed the constant-pressure molar heat capacity CP=52RC_P = \frac{5}{2}R.

You set up the heat equation Q=nCPΔTQ = n C_P \Delta T and accurately solved for ΔT\Delta T and T2T_2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
First Law Misapplication in Isobaric Process

None

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated an isobaric expansion as an isothermal one by setting W=QW = Q, neglecting the non-zero change in internal energy ΔU=nCVΔT\Delta U = n C_V \Delta T.

REASONING PATH
Your ACEpath teacher’s suggested approach
First Law Energy Partition
  • According to the First Law, Q=ΔU+WQ = \Delta U + W. If temperature changes (ΔT≠0\Delta T \neq 0), internal energy must change (ΔU≠0\Delta U \neq 0), meaning W≠QW \neq Q.

  • Always compute both components or use the ideal gas isobaric work relation W=PΔV=nRΔTW = P \Delta V = n R \Delta T.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use W=nRΔTW = n R \Delta T for isobaric work: W=(2.50 mol)(8.314 J/(mol⋅K))(100 K)=2078.5 J≈2.08×103 JW = (2.50\text{ mol})(8.314\text{ J}/(\text{mol}\cdot\text{K}))(100\text{ K}) = 2078.5\text{ J} \approx 2.08 \times 10^3\text{ J}.

  2. Calculate the ratio: WQ=2078.5 J5200 J=0.400\frac{W}{Q} = \frac{2078.5\text{ J}}{5200\text{ J}} = 0.400.

Final answer

(a) T2=400 KT_2 = 400\text{ K}; (b) W=2.08×103 JW = 2.08 \times 10^3\text{ J}; (c) WQ=0.400\frac{W}{Q} = 0.400

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember that W=QW = Q applies only to isothermal processes (ΔT=0\Delta T = 0).

  • For isobaric processes of a monatomic ideal gas, remember the fixed energy split: ΔUQ=CVCP=35\frac{\Delta U}{Q} = \frac{C_V}{C_P} = \frac{3}{5} (60%60\%) and WQ=RCP=25\frac{W}{Q} = \frac{R}{C_P} = \frac{2}{5} (40%40\%).

OverviewACEpath Teacher's Diagnosis

03 The student misremembers the isobaric heat-work ratio as C_V/C_P (3/5) rather than R/C_P (2/5) by calculating the internal energy change fraction instead of work.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Q=nCPΔT  ⟹  ΔT=52002.50×20.785≈100.1 K  ⟹  T2=300+100.1=400.1 KQ = n C_P \Delta T \implies \Delta T = \frac{5200}{2.50 \times 20.785} \approx 100.1\text{ K} \implies T_2 = 300 + 100.1 = 400.1\text{ K}

  2. Step 2

    W=35×Q=0.60×5200=3120 JW = \frac{3}{5} \times Q = 0.60 \times 5200 = 3120\text{ J}

    Correct

    W=nRΔT=Q−ΔU=(1−CVCP)Q=25Q=0.40×5200 J=2.08×103 JW = n R \Delta T = Q - \Delta U = \left(1 - \frac{C_V}{C_P}\right) Q = \frac{2}{5} Q = 0.40 \times 5200\text{ J} = 2.08 \times 10^3\text{ J}

    You used the ratio 35\frac{3}{5}, which represents the internal energy change ΔU=nCVΔT=35Q\Delta U = n C_V \Delta T = \frac{3}{5}Q, rather than work. For an isobaric process, work is W=nRΔT=25QW = n R \Delta T = \frac{2}{5}Q.

  3. Step 3

    WQ=31205200=35=0.60\frac{W}{Q} = \frac{3120}{5200} = \frac{3}{5} = 0.60

    Correct

    WQ=RCP=R52R=25=0.400\frac{W}{Q} = \frac{R}{C_P} = \frac{R}{\frac{5}{2}R} = \frac{2}{5} = 0.400

    Because the work calculation in the previous step used the internal energy fraction, this ratio carried forward the same error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the constant-pressure molar heat capacity CPC_P to find the temperature change.

You accurately calculated the final temperature T2T_2 from the initial temperature and ΔT\Delta T.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula confusion between internal energy and work ratios

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assigned the ratio CVCP=35\frac{C_V}{C_P} = \frac{3}{5} to work instead of internal energy. In an isobaric expansion of a monatomic ideal gas, heat divides according to the First Law: ΔU=CVCPQ=35Q\Delta U = \frac{C_V}{C_P}Q = \frac{3}{5}Q while W=RCPQ=25QW = \frac{R}{C_P}Q = \frac{2}{5}Q.

REASONING PATH
Your ACEpath teacher’s suggested approach
Heat partitioning in isobaric expansion
  • For an ideal gas at constant pressure, Q=ΔU+W=nCVΔT+nRΔTQ = \Delta U + W = n C_V \Delta T + n R \Delta T.

  • Always remember that internal energy change takes the CVC_V portion (35\frac{3}{5} for monatomic), while work takes the RR portion (25\frac{2}{5} for monatomic).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that W=nRΔTW = n R \Delta T and Q=nCPΔTQ = n C_P \Delta T, so WQ=RCP=R52R=25=0.400\frac{W}{Q} = \frac{R}{C_P} = \frac{R}{\frac{5}{2}R} = \frac{2}{5} = 0.400.

  2. Compute the work done: W=25Q=0.400×5200 J=2.08×103 JW = \frac{2}{5} Q = 0.400 \times 5200\text{ J} = 2.08 \times 10^3\text{ J}.

Final answer

(a) T2=400 KT_2 = 400\text{ K}, (b) W=2.08×103 JW = 2.08 \times 10^3\text{ J}, (c) WQ=0.400\frac{W}{Q} = 0.400 (or 40.0%40.0\%)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how the First Law of Thermodynamics (Q=ΔU+WQ = \Delta U + W) splits heat into internal energy change (nCVΔTn C_V \Delta T) and boundary work (nRΔTn R \Delta T) during isobaric processes.

  • Practice checking whether your calculated work matches W=PΔV=nRΔTW = P \Delta V = n R \Delta T directly before taking fractional shortcuts.

Lock it in

Similar question

01

A 1.00 mol1.00\text{ mol} sample of an ideal monatomic gas (CV=32RC_V = \frac{3}{2}R, CP=52RC_P = \frac{5}{2}R) is heated isobarically such that its temperature increases by ΔT=40.0 K\Delta T = 40.0\text{ K}. Calculate the heat added QQ, the work done WW, and the change in internal energy ΔU\Delta U. Take R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}).

Answer

Q=nCPΔT=(1.00)(52×8.314)(40.0)=831.4 JQ = n C_P \Delta T = (1.00)\left(\frac{5}{2} \times 8.314\right)(40.0) = 831.4\text{ J}. Work done is W=nRΔT=(1.00)(8.314)(40.0)=332.6 JW = n R \Delta T = (1.00)(8.314)(40.0) = 332.6\text{ J}. Internal energy change is ΔU=Q−W=831.4−332.6=498.8 J\Delta U = Q - W = 831.4 - 332.6 = 498.8\text{ J} (or ΔU=nCVΔT\Delta U = n C_V \Delta T).

02

A cylinder containing 2.00 mol2.00\text{ mol} of an ideal diatomic gas (CV=52RC_V = \frac{5}{2}R, CP=72RC_P = \frac{7}{2}R) absorbs 3.50×103 J3.50 \times 10^3\text{ J} of heat at a constant pressure. Determine: (a) the temperature change ΔT\Delta T, and (b) the fraction WQ\frac{W}{Q} of heat converted into work. Take R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}).

Answer

(a) Q=nCPΔT  ⟹  ΔT=3500(2.00)(72×8.314)=350058.198≈60.1 KQ = n C_P \Delta T \implies \Delta T = \frac{3500}{(2.00)\left(\frac{7}{2} \times 8.314\right)} = \frac{3500}{58.198} \approx 60.1\text{ K}. (b) WQ=nRΔTnCPΔT=RCP=R72R=27≈0.286\frac{W}{Q} = \frac{n R \Delta T}{n C_P \Delta T} = \frac{R}{C_P} = \frac{R}{\frac{7}{2}R} = \frac{2}{7} \approx 0.286 (or 28.6%28.6\%).

03

An ideal monatomic gas expands from volume V1V_1 to V2=2V1V_2 = 2 V_1 along two different paths from the same initial state (P1,V1,T1)(P_1, V_1, T_1): Path A is isobaric, and Path B is isothermal. For which path is the required heat input QQ greater, and what is the ratio QA/QBQ_A / Q_B in terms of n,R,T1n, R, T_1?

Answer

For Path A (isobaric): T2=2T1T_2 = 2T_1, so ΔT=T1\Delta T = T_1. Heat absorbed is QA=nCPΔT=52nRT1Q_A = n C_P \Delta T = \frac{5}{2} n R T_1. For Path B (isothermal): ΔU=0\Delta U = 0, so QB=W=nRT1ln⁡(V2/V1)=nRT1ln⁡2≈0.693nRT1Q_B = W = n R T_1 \ln(V_2/V_1) = n R T_1 \ln 2 \approx 0.693 n R T_1. Thus, QA>QBQ_A > Q_B, with ratio QAQB=2.5ln⁡2≈3.61\frac{Q_A}{Q_B} = \frac{2.5}{\ln 2} \approx 3.61.

Loading workspace…